Labshake search
Citations for Quantifoil Micro Tools :
51 - 100 of 1446 citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2024Quote: Freshly continuous thin layer of carbon grids (Quantifoil 300-mesh Au R1.2/1.3 ...
-
bioRxiv - Immunology 2024Quote: ... and Quantifoil R 2/1 (Cu, 400-mesh; Quantifoil Micro Tools GmbH) were used for freezing ...
-
bioRxiv - Immunology 2024Quote: Quantifoil R2/2 holey carbon copper grids (Quantifoil, Grosslöbichau, Germany) were cleaned by overnight incubation in ethyl acetate and coated with 1 nm continuous carbon foil by floatation ...
-
bioRxiv - Immunology 2024Quote: ... 1.2/1.3 (Au, 300-mesh; Quantifoil Micro Tools GmbH) and Quantifoil R 2/1 (Cu ...
-
bioRxiv - Biochemistry 2024Quote: ... 4 uL of the concentrated sample was applied to freshly glow-discharged R2/1 holey carbon grids (Quantifoil), blotted with blot force of 5 for 5 s using a Vitrobot Mark IV (Thermo Fisher ...
-
bioRxiv - Biochemistry 2024Quote: Ultra-Au 1.2/1.3 grids (Quantifoil) are glow discharged on air for 45 s at 30 mA (Emitech Glow Discharge) ...
-
bioRxiv - Biochemistry 2024Quote: ... The sample was applied to Holey carbon grids (3.5/1, 400 mesh, Quantifoil) at 4 °C ...
-
bioRxiv - Biochemistry 2024Quote: A volume of 3 µl purified protein complex at a concentration of 1mg/ml (JSR1-hGi) or 8 mg/ml (JSR1-jsGiq) was applied to glow-discharged holey carbon grids (Quantifoil R1.2/1.3 Cu 200 mesh). The grids were blotted with a Vitrobot Mark IV (Thermo Fisher Scientific ...
-
bioRxiv - Biochemistry 2024Quote: Quantifoil R1.2/1.3 300 mesh Cu grids (Quantifoil Micro Tools GmbH) were coated with a homemade amorphous carbon film ...
-
bioRxiv - Biochemistry 2024Quote: ... Vitrified specimen was prepared by applying 3 μl of protein complexes onto a glow-discharged 300 mesh gold holey carbon Quantifoil R 1.2/1.3 grid (Quantifoil Micro Tools) and frozen in liquid ethane cooled by liquid nitrogen inside a Vitrobot Mark IV (FEI) ...
-
bioRxiv - Biochemistry 2024Quote: ... or calpain-3-titin/I81-I83 (2mg/mL) from Superose 6 increase 10/300GL column chromatography was loaded onto glow-discharged holey carbon grids (Quantifoil 1.2/1.3 + 2 nm Carbon). The grids were blotted with filter paper for 2.5 secs at 22 °C and then immediately plunged into liquid ethane cooled by liquid nitrogen using a Vitrobot Mark IV (Thermo Fisher Scientific) ...
-
bioRxiv - Biochemistry 2024Quote: ... of the freshly eluted complex peak solution (4.0 mg/mL) was loaded onto glow-discharged holey carbon grids (Quantifoil 2/2). The procedures for blotting and plunge freezing the grids were the same as above ...
-
bioRxiv - Biochemistry 2024Quote: Samples (3 μl) were applied onto a glow-discharged UltrAuFoil grid (Quantifoil GmbH) and were flash frozen in liquid ethane using the Vitrobot mark IV (Thermo Fisher Scientific ...
-
bioRxiv - Biophysics 2024Quote: ... 3 μL of the supernatant was then applied to a glow-discharged grid (R1.2/1.3 300 mesh Au grid, Quantifoil), blotted for 2 s with force 0 and plunged into liquid ethane using a Vitrobot Mark IV (Thermo Fisher Scientific).
-
bioRxiv - Biophysics 2024Quote: Approximately 3□μL of the sample solution were put on newly glow-discharged TEM grids (Quantifoil R2/1, Cu, mesh 200) and plunge-frozen in liquid ethane using the Vitrobot Mark IV (Thermo Fisher Scientific) ...
-
bioRxiv - Biophysics 2024Quote: Electron microscopy grids (Quantifoil Au, 200-mesh copper R1.2/1.3) were glow-discharged for 90 s using PELCO easiGlow ...
-
bioRxiv - Biochemistry 2024Quote: A 3Cµl portion of the sample was loaded onto glow-discharged holey carbon grids (Quantifoil Cu/Rh 300 mesh R1.2/1.3), which were then plunge-frozen in liquid ethane ...
-
bioRxiv - Biochemistry 2024Quote: 3.5 μL purified mCELSR1 CADH1-GAIN (3.0 mg/mL) was applied on glow-discharged holey carbon grids (Quantifoil R1.2/1.3, 300 mesh), and vitrified using a Vitrobot Mark IV (FEI Company) ...
-
bioRxiv - Biochemistry 2024Quote: ... Three microliters of sample were applied to glow-discharged R2/2 carbon grids (Quantifoil), which were blored for 5 s and at a blot force of 25 and plunge-frozen in liquid ethane with a Vitrobot Mark IV (ThermoFisher ...
-
bioRxiv - Biochemistry 2024Quote: ... Cryo-EM grids were prepared by applying 3 µl of concentrated sample onto 400-mesh R1.2/1.3 UltrAuFoil grids (Quantifoil Micro Tools GmbH), which had rendered hydrophilic by glow discharging at 15mA for 60seconds with a PELCO EasyGlow device (TED PELLA ...
-
bioRxiv - Biophysics 2024Quote: ... The lacey carbon grids (300 mesh) (Quantifoil) were glow-discharged with easiGlow at 20 mA for 45 seconds ...
-
bioRxiv - Biophysics 2024Quote: ... 4 µl of this sample was then applied to plasma-cleaned holey carbon grids (Quantifoil) and plunge frozen with an FEI vitrobot mark IV at 4°C and 100% humidity.
-
bioRxiv - Biophysics 2024Quote: Holey carbon grids (Quantifoil Au R 2/2, 200 mesh) were glow-discharged with easiGlow at 20 mA for 45 s ...
-
bioRxiv - Cell Biology 2024Quote: Quantifoil R2/1 or SiO2 R1/4 gold grids (both Quantifoil Mirco Tools GmbH, Germany) were briefly washed in chloroform and placed on drops of poly-D-lysine (100 µg/ml) ...
-
bioRxiv - Biochemistry 2024Quote: ... 3.6 μL of sample was applied to glow discharged holey carbon film grids (either Quantifoil 300 mesh ...
-
bioRxiv - Biochemistry 2024Quote: ... approximately 3.5 μl of protein solution was deposited onto a Quantifoil R1.2/1.3 holey carbon grid (Quantifoil Micro Tools GmbH, Jena, Germany) coated with a thin carbon film ...
-
bioRxiv - Biochemistry 2024Quote: ... 300 mesh gold grids (Quantifoil) and plunge-frozen into liquid ethane (Vitrobot Mark IV ...
-
bioRxiv - Biochemistry 2024Quote: ... 300 mesh gold grids (Quantifoil) and plunge-frozen into liquid ethane (Vitrobot Mark IV ...
-
bioRxiv - Biochemistry 2024Quote: ... Peak fractions were concentrated to ∼3.2 mg/mL and 3.5 μL of concentrated sample immediately applied to a Quantifoil R2/1 300 copper mesh grid (Quantifoil Micro Tools GmbH), which had been glow discharged in a GloQube Plus glow discharger for 45 seconds at 25 mA and coated with graphene oxide (Sigma Aldrich ...
-
bioRxiv - Biochemistry 2024Quote: ... 3.5 μL of this protein-DNA mix were applied to 300-mesh copper R2/1 Quantifoil Holey Carbon Grids (Quantifoil Micro Tools GmbH) that had been freshly glow discharged for 30 seconds at 25 mA in a GloQube Glow Discharge System (Quorum Technologies ...
-
bioRxiv - Biochemistry 2024Quote: ... Cryo-EM grids were prepared by applying 3.5 μL of recombinant HsMCM2-7 at 1.5 μM concentration onto a glow-discharged (25 seconds at 25 mA in a GloQube Plus glow discharger) 300-mesh R1.2/1.3 UltrAuFoil grid (Quantifoil Micro Tools GmbH) in 25 mM HEPES-KOH (pH 7.5) ...
-
bioRxiv - Biochemistry 2024Quote: The purified complex was applied onto freshly glow-discharged holey carbon grids (Quantifoil Au 300 mesh R1.2/1.3), which were then immediately plunge-frozen in liquid ethane ...
-
bioRxiv - Cell Biology 2024Quote: ... 2.5 – 3.51μL sample was applied to graphene oxide coated EM grids (Quantifoil Cu400 R1.2/1.3) following a previously published protocol(52) ...
-
bioRxiv - Biophysics 2024Quote: ... Au 300 (Quantifoil), were glow discharged in the presence of amylamine for 30 seconds at 10 mA on a Quorum GloQube glow-discharge unit ...
-
bioRxiv - Biophysics 2024Quote: ... so the TTR sample was frozen on R1.2/1.3 UltrAuFoil Holey Gold grids (Quantifoil) that had been coated with a single layer of monolayer graphene ...
-
bioRxiv - Biophysics 2024Quote: ... UltrAuFoil (Quantifoil GmbH) R1.2/1.3 Au 300 mesh grids were first washed in acetone for 30 seconds followed by isopropyl alcohol for 10 seconds and left to dry ...
-
bioRxiv - Biophysics 2024Quote: ... and applied to UltrAuFoil 0.6/1 300 mesh gold grids (Quantifoil), which had been glow-discharged two times for 90 s at 15 mA and 0,38 mbar using a PELCO easiGlow unit (Ted Pella Inc.) ...
-
bioRxiv - Biophysics 2024Quote: Plunge freezing of cells was performed on R2/1 SiO2 copper 200 mesh (Quantifoil) grids ...
-
bioRxiv - Biophysics 2024Quote: ... Aliquots of 1.25 – 1.5 ul RyR1-nanodisc were applied onto each side of glow-discharged C-Flat - 2/1 - 3Au holey-carbon (Protochips, NC) or UltraAufoil -1.2/1.3 holey-gold (Quantifoil, Germany) with 300 TEM mesh ...
-
bioRxiv - Cell Biology 2024Quote: ... Quantifoil Holey SiO2 R 1/4 Au 200 mesh EM grids (Quantifoil Micro Tools #N1-s13nAi20-01) were glow discharged on both sides in a Pelco easyglow for 45 s at 0.37 mBar and 15 mA ...
-
bioRxiv - Biophysics 2024Quote: The apoferritin and aldolase samples imaged on the Talos F200C microscope were prepared on UltrAuFoil holey carbon grids (300 mesh, 1.2/1.3 µm spacing) purchased from Quantifoil. Grids were plasma cleaned for six seconds at 15 Watts (75% nitrogen/25% oxygen atmosphere ...
-
bioRxiv - Cell Biology 2024Quote: EM support grids (Au grids 200 mesh, carbon or SiO2 foil, R2/2 or R1/4, Quantifoil) were glow discharged with a Pelco easiGlow for 90 sec at 15 mA ...
-
bioRxiv - Cell Biology 2024Quote: ... An aliquot of a 5 μl sample was applied to a glow-discharged holey carbon grid (Quantifoil R2/2, Au, 400 mesh). After waiting for 60 s ...
-
bioRxiv - Cell Biology 2024Quote: An aliquot of a 3μl purified PDC sample was applied to a holey carbon grid covered with graphene-oxide (Quantifoil R1.2/1.3, Au, 300 mesh). After waiting for 60 s ...
-
bioRxiv - Cell Biology 2024Quote: ... 4 μl of the cell suspension was applied onto a glow-discharged holey SiO2 grid (R1/4, Au, 200 mesh, Quantifoil) mounted on in the plunger chamber ...
-
bioRxiv - Biophysics 2024Quote: Three microliters of Kir2.1 R312H mutant form were placed on glow-discharged (25 s) holey carbon-coated grids (Quantifoil R1.2/1.3, Au 200 mesh), blotted for 3.0 s ...
-
bioRxiv - Biophysics 2024Quote: ... Holey carbon grids (Quantifoil Cu 300 mesh, R2/2) were prepared with fiducials by glow-discharging ...
-
bioRxiv - Biochemistry 2024Quote: ... was applied to a glow-discharged UltrAuFoil R1.2/1.3 300-mesh gold grid (Quantifoil) and incubated for one minute under 100% humidity at 15°C ...
-
bioRxiv - Biochemistry 2024Quote: ... Quantifoil R1.2/1.3 Cu-200 grids (Quantifoil Micro Tools GmbH) were glow discharged for 30s in a PDC-32G-2 (Harrick Plasma Inc.) ...
-
bioRxiv - Biochemistry 2024Quote: ... a 3.6 μL aliquot of protein sample at a concentration of 0.12-0.15 mg/mL was pipetted onto a holey carbon film supported by a 200 mesh copper grid (Quantifoil R1.2/1.3). The grid was previously washed and glow discharged (PELCO easiGlow) ...