Labshake search
Citations for Takara Bio :
4751 - 4800 of 5037 citations for Parallel Artificial Membrane Permeability Assay PAMPA Kit since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2024Quote: Total RNA from isolated astrocytes or newborn neurons and MSP-1 differentiation induced astrocytes was isolated using RNeasy Mini Kit (Qiagen).1ng (isolated astrocytes and newborn neurons) or 10ng (cultured astrocytes) RNA samples were pre-treated with SMART-seq stranded Kit (Takara Bio, Japan). The sequencing was performed using Illumina NovaSeq6000 (Illumina ...
-
bioRxiv - Physiology 2024Quote: ... and 5 µg of total RNA was used for synthesizing complementary DNA (cDNA) using an RNA to cDNA EcoDry™ Premix Kit (Clontech, USA). Quantitative PCR (qPCR ...
-
bioRxiv - Cancer Biology 2024Quote: ... The wild-type AKT1 (NM_001014431.2) was cloned in the pECMV-3×FLAG-N vector using the In-Fusion® HD Cloning Kit (Takara Bio, Cat# 639650). The K20R and K20Q mutant AKT1 plasmids were constructed using the Fast Site-Directed Mutagenesis Kit (TIANGEN ...
-
bioRxiv - Plant Biology 2024Quote: ... We used 600 ng of RNA for each cDNA synthesis following the instructions of the RevertAid First Strand cDNA synthesis kit (Takara, Shiga, Japan). For all cDNA syntheses ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were subjected to library preparation using the TAKARA SMARTer Stranded Total RNA-Seq Kit v3 - Pico Input Mammalian for Illumina (Takara Bio, Japan). Fragmentation was done at 94°C for 4 min ...
-
bioRxiv - Biochemistry 2024Quote: ... Site-specific mutagenesis of DLK1 was performed using PCR according to the protocol of the PrimeSTAR mutagenesis basal kit (Takara, Shiga, Japan). The primer sequences are listed in Table S5.
-
bioRxiv - Biochemistry 2024Quote: ... Sequence verification was performed by cloning and sequencing the respective genes of interest from cDNA obtained using Rapid amplification of cDNA ends (RACE) kit (Takara Bio, Japan) following standard protocol and primers listed in Supplementary Information (SI Appendix ...
-
bioRxiv - Developmental Biology 2024Quote: Libraries for RNA sequencing (RNA-seq) from sorted mammary cells were generated using SMARTer stranded total RNA-seq kit V2 – Pico input mammalian (TaKaRa bio, 634414) according to the manufacturer’s instructions using 13 cycles of amplification ...
-
bioRxiv - Developmental Biology 2024Quote: ... 1 μg of total RNA was taken to synthesize cDNA by using PrimeScript 1st strand cDNA synthesis kit (Takara, Cat. No. 6110A). RT-PCR was carried out for the multiple developmental stages for amplification of zebrafish DIS3L2 with beta-actin as a control ...
-
bioRxiv - Developmental Biology 2021Quote: Full length human COG4 was cloned into pCS2+ vector from plasmid hCOG4-siR-3myc in AAZ6 (Gift from Professor Vladimir V. Lupashin) using In-Fusion® HD Cloning Kit (TaKaRa Bio, 638909) with primers 5’-ATGGGAACCAAGATGGCGGA-3’ ...
-
bioRxiv - Developmental Biology 2021Quote: TdT-mediated dUTP nick end labeling (TUNEL) staining was carried out with In Situ Apoptosis Detection Kit (MK500, Takara Bio Inc., Shiga, Japan), according to the manufacturer’s instruction ...
-
bioRxiv - Developmental Biology 2021Quote: TdT-mediated dUTP nick end labeling (TUNEL) staining was carried out with In Situ Apoptosis Detection Kit (MK500, Takara Bio Inc., Shiga, Japan), according to the manufacturer’s instruction ...
-
bioRxiv - Developmental Biology 2021Quote: ... Purified RNA served as input for the cDNA library preparation with SMART-Seq v.4 Ultra Low Input RNA kit (Takara Bio, Kusatsu, Japan) and Nextera XT DNA Library Prep Kit (Illumina ...
-
bioRxiv - Immunology 2021Quote: ... 100 μL cell culture supernatant was harvested for viral RNA extraction using the MINIBEST Viral RNA/DNA Extraction Kit (Takara, Cat no. 9766). RNA was eluted in 30 μL RNase-free water ...
-
bioRxiv - Genomics 2020Quote: ... All of the precipitated RNA was converted into a sequencing library using SMARTer® smRNA-Seq Kit for Illumina (Thermo Fisher/Takara 635032). The kit protocol was used with the following specifics ...
-
bioRxiv - Molecular Biology 2021Quote: ... RNA was subjected to rRNA depletion using a modified Ribozero method and library preparation using Clontech SMARTer Stranded RNA-Seq Kits (Takara Bio, Shiga, Japan). Sequencing was performed on the Illumina HiSeq2500 100bp PE Rapid run (Ramaciotti Centre for Genomics ...
-
bioRxiv - Genomics 2020Quote: Round 1 PCR amplicons were collected from the ICELL8 chip using the SMARTer ICELL8 Collection Kit: (Collection Fixture, Collection Tube and Collection Film) into a collection and storage tube as per manufacturer’s instructions (Takara Bio USA, CA, USA). 50% of the extracted library was purified twice using a 1X proportion of AMPure XP beads (Beckman Coulter ...
-
bioRxiv - Genomics 2020Quote: RNA preparations of similar quality from adult mouse testis and sperm were used for constructing PacBio IsoSeq libraries (SMRT bell libraries). Full-length cDNA was synthesized using the Clontech SMARTer PCR cDNA Synthesis kit (Cat. # 634925) (Clontech, Palo Alto, CA). Approximately 13-15 PCR cycles were required to generate 10-15 µg of ds-cDNA from a 1 µg RNA sample ...
-
bioRxiv - Molecular Biology 2021Quote: ... were co-transfected into HEK293T cells at a 1:1:1:1.6:4.6 ratio using CalPhos mammalian transfection kit (TaKaRa Clontech, Mountain View, CA #631312) according to manufacturer’s instructions ...
-
bioRxiv - Genomics 2020Quote: ... Full-length cDNA libraries were constructed from 1 μg of total RNA with SMARTer® cDNA synthesis kit (Takara Bio, Kusatsu, Shiga Japan), utilizing switching mechanism at 5’ end of RNA template (SMART ...
-
bioRxiv - Immunology 2021Quote: ... or RARα403 (RARα-dAF2) 41 with a C-terminal Halo-tag were generated using the In- Fusion Cloning Kit (TaKaRa Bio Inc, Shiga, Japan). Lentiviruses were generated using CSII-EF- MCS-IRES2-Venus (for overexpression) ...
-
bioRxiv - Immunology 2021Quote: ... cDNA was synthesized and amplified using template switching technology of the SMART-Seq v4 Ultra Low Input RNA Kit (Clontech Laboratories, Cat. #R400752), followed by purification using the Agencourt AMPure XP Kit (Beckman Coulter ...
-
bioRxiv - Plant Biology 2020Quote: ... Then the first-strand cDNA synthesis was primed with an oligo (dT) primer by using a PrimeScript™ RT reagent Kit with gDNA Eraser (Perfect Real Time) (Takara, Dalian, China) according to the manufacturer’s instructions ...
-
bioRxiv - Plant Biology 2020Quote: ... a 4.0 kb fragment containing the ERF019 gene and its native promoter was amplified and inserted into pBI101 with BamHI and SacI by In-Fusion HD Cloning Kit (Takara Bio, Shiga, Japan). For awf2 ...
-
bioRxiv - Cancer Biology 2020Quote: ... Amplified cDNA from the ICELL8® 3’ DE Chip individual cells was collected and pooled using the ICELL8® Collection Kit (Takara Bio) by centrifugation at 3,200 x g ...
-
bioRxiv - Cancer Biology 2020Quote: ... and used to produce low input Illumina Fragment libraries using a Low Input Library Prep kit v2 (Clontech Laboratories, Inc., Catalog No. 634899). DNA was fragmented using the Covaris S220 sonic disruptor and libraries were then sequenced as paired end reads with a read length of 100bp on an Illumina HiSeq 3000.
-
bioRxiv - Plant Biology 2020Quote: ... First-strand cDNA was synthesized from 1 μg total RNA (20 μL reaction volume) using a PrimeScript™ 1st Strand cDNA Synthesis Kit (Takara, Dalian, China) according to the manufacturer’s protocol.
-
bioRxiv - Cell Biology 2021Quote: ... pChlamiRNA3int (obtained from the Chlamydomonas Resource Center) in between Xho1 and Not1 restriction sites by In-fusion HD EcoDry cloning plus kit (Takara, Cat. No. 638915). A gene fragment encoding three copies of the 9-amino-acid HA epitope followed by EcoR1 and XbaI restriction sites was inserted using QuikChange II XL Site-Directed Mutagenesis Kit (Agilent technologies) ...
-
bioRxiv - Cell Biology 2021Quote: ... For iPSC-O differentiation to hepatocyte-like cells (HLC-O): Hepatic differentiation of iPSC-O was performed by Cellartis Hepatocyte Differentiation Kit (Y30050, Takara Bio, Shiga, Japan) according to the manufacturer’s instructions ...
-
bioRxiv - Systems Biology 2021Quote: ... 6 genes were generated as inserts in the shuttle vector puC57 and were subsequently cloned into pDM323 between BglII and SpeI sites using the In-Fusion® HD Cloning Kit (Takara Bio USA) and confirmed by sequencing ...
-
bioRxiv - Microbiology 2021Quote: 5’-RACE PCR was performed on total RNA from VSVg-NL43 infected CD4+ T cells and MDMs following the manufacturer’s protocol for SMARTer® RACE 5’/3’ Kit (Takara Bio, Cat: 634858). Random primers were annealed to template RNA using 10X Random Primer Mix ...
-
bioRxiv - Microbiology 2021Quote: ... The LAMP1 gene was then sub cloned into the pEF1α-mCherry-N1 vector using the In-Fusion® HD Cloning Kit (Clontech, Takara, Japan), according to manufacturer’s instructions ...
-
bioRxiv - Microbiology 2020Quote: pEX18Tc-hpdA was constructed for gene knockout by fusing the erythromycin resistance gene and two upstream and downstream fragments of the target gene amplified with the primers shown in Table 3 to Sac I/Hind III-digested pEX18Tc with the In-Fusion® HD Cloning Kit (TaKaRa, Dalian, China). The resulting plasmid pEX18Tc-hpdA was transformed into E ...
-
bioRxiv - Microbiology 2020Quote: ... The amplification of viral DNA by PCR was carried out base on the manufacturer’s recommendations of the LA PCR Kit (TaKaRa Biomedical Technology Beijing, China). Briefly ...
-
bioRxiv - Microbiology 2020Quote: The lentivirus-based expression plasmids were generated with a pLOV-CMV-GFP vector (Neuron Biotech, China) using In-Fusion HD Cloning kits (Clontech Laboratories, Inc., USA), according to the manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2020Quote: ... or its derivatives with appropriate antibiotics resistant genes (ampicillin for Escherichia coli and neomycin or puromycin for mammalian cells) and a tag (SNAP-tag or HaloTag) using an In-Fusion HD Cloning Kit (639635, Takara Bio, Shiga, Japan). The E ...
-
bioRxiv - Neuroscience 2022Quote: ... Antennal cDNA was synthesized from 1 μg of antennal total RNA using SMARTer™ RACE cDNA amplification kit according to manufacturer’s instructions (Clontech, Mountain View, CA). To obtain full-length coding sequences ...
-
bioRxiv - Cancer Biology 2022Quote: ... 0.25 ng to 10 ng of total RNA was used for cDNA library preparation using a kit suitable for RNA isolation at pico-molar concentrations (MARTer Stranded Total RNA-Seq Kit v2-Pico Input Mammalian) following manufacturer recommended protocol (Clontech/Takara Bio #635005). Sequencing was performed by the UM DNA Sequencing Core ...
-
bioRxiv - Microbiology 2022Quote: The BLV pol gene was measured in the genomic DNA samples of blood and tissue samples of cattle using real-time PCR with a BLV Detection Kit (Takara Bio, Otsu, Japan) with a LightCycler 480 System II (Roche Diagnostics ...
-
bioRxiv - Microbiology 2021Quote: ... the cDNAs were reverse-transcribed from 5 µg of total RNA with the PrimeScript™ II 1st Strand cDNA Synthesis Kit (TaKaRa, Dalian, China). Real time PCR (qPCR ...
-
bioRxiv - Developmental Biology 2020Quote: ... The corresponding full-length cDNA library was then generated using 1μg total RNA and the SMARTer PCR cDNA synthesis kit (Clontech, Takara Bio Inc., Shiga, Japan) following PacBio recommendations set out in the Iso-Seq method ...
-
bioRxiv - Molecular Biology 2021Quote: ... The chip was then loaded again on Fluidigm C1 and cDNA was synthesised and pre- amplified in the chip using Clontech SMARTer kit (Takara Clontech, Cat# 634833). In batch B ...
-
bioRxiv - Neuroscience 2020Quote: ... Single cells were collected into individual wells of 96 well-PCR plates containing 9.5 μL/well of freshly made lysis buffer (provided in SMART-Seq v4 Ultra Low Input kit for Sequencing (Takara Bio USA #634893)) ...
-
bioRxiv - Neuroscience 2020Quote: mRNA in the cell lysate was reverse-transcribed and amplified for 25 cycles using the SMART-Seq v4 Ultra Low Input kit for Sequencing (Takara Bio USA #634893) according to manufacturer’s instructions ...
-
bioRxiv - Molecular Biology 2020Quote: ... The PCR products of the expected size were purified using the Easy Pure Quick Gel Extraction Kit (Transgen Biotech, Beijing, China) and cloned into TA Vector (Takara Biotechnology, Dalian, China). Positive clones were selected and sequenced by Beijing Genomics Institute (Beijing ...
-
bioRxiv - Microbiology 2020Quote: ... One hundred microliter cell culture supernatant was harvested for viral RNA extraction using the MiniBEST Viral RNA/DNA Extraction Kit (Takara, Cat no. 9766) according to the manufacturer’s instructions ...
-
bioRxiv - Plant Biology 2021Quote: Transcription start sites were characterised by cloning and sequencing 5’ RACE products using the SMARTer RACE 5’/3’ kit (Takara Bio USA, Inc). In summary ...
-
bioRxiv - Bioengineering 2022Quote: ... Reverse transcription to obtain cDNA was performed according to the instructions of the PrimeScript 1st Strand cDNA Synthesis Kit (Takara Biomedical Technology (Beijing) Co. ...
-
bioRxiv - Microbiology 2022Quote: ... The PCR product was ligated into the NotI site of the pNEN142 vector (Minetoki et al., 2003) with an In-Fusion HD Cloning Kit (Takara Bio, Kusatsu, Japan); this vector contains the improved promoter of the A ...
-
bioRxiv - Neuroscience 2022Quote: ... mRNA 500 ng was used for cDNA synthesis in 10 μl volume according to the manufacturer’s instructions of PrimeScriptTM RT-PCR kit (Takara Bio Inc., Shiga, Japan). Real-time RT-PCR was then performed using the KAPA SYBR FAST qPCR Master Mix (2x ...