Labshake search
Citations for Bio-Rad :
1101 - 1150 of 1329 citations for 7 8 dimethylbenzo c acridine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2023Quote: ... Plates were incubated at 30°C and the growth was monitored by image scan using the device ChemiDoc MP (Bio-Rad) every 24 hours ...
-
bioRxiv - Cell Biology 2023Quote: ... Lysates were then clarified through centrifugation (14′000g, 20 min, 4°C) and then quantified using Bradford Reagent (Bio-Rad Laboratories) according to manufacturer’s instructions.
-
bioRxiv - Biochemistry 2023Quote: ... This mixture was then incubated at 4°C for 2 h with gentle agitation before reconstitution was initiated by removing detergent by incubating with Bio-beads (Bio-Rad) at 4°C overnight with constant rotation ...
-
bioRxiv - Biochemistry 2023Quote: ... boiled for 5 min at 98 °C in the presence or absence of β-mercaptoethanol and loaded onto a TGX mini protean precast gel (Biorad) for 50 min at 200V.
-
bioRxiv - Biophysics 2023Quote: ... This culture was used to inoculate 1 L of medium containing 25 µg/ml kanamycin in a 2 L baffled Erlenmeyer flask and grown at 37 °C in a C76 shaking water bath until the optical density at 600 nm (OD600, SmartSpec Plus spectrophotometer, Bio-Rad) reached ∼0.5 – 0.6 ...
-
bioRxiv - Molecular Biology 2023Quote: ... About 15 μg of protein samples from lysates were boiled at 95°C for 5 min in Laemmli sample buffer (Bio-Rad) and resolved in 4-15% gradient SDS-PAGE gels (Mini-Protean TGX ...
-
bioRxiv - Cell Biology 2023Quote: ... Samples were denatured by 5 min incubation at 95°C before running them on a TGX 4–12% or 10% gel (Bio-Rad) and transferred onto nitrocellulose membrane for hybridization with specific antibodies.
-
bioRxiv - Cell Biology 2023Quote: ... Proteins samples were denatured in SDS-sample buffer for 5 min at 95°C and loaded onto Mini-Protean TGXTM gels (BioRad Laboratories) in equal amounts and subjected to electrophoresis ...
-
bioRxiv - Immunology 2024Quote: ... the proteins were transferred to a polyvinylidene difluoride membrane (110V, 1h, 4°C) using a Mini Trans-Blot cell apparatus (Bio-Rad). Non-specific binding sites were blocked using PBS/Tween 20 (0.05% Tween 20 ...
-
bioRxiv - Microbiology 2024Quote: ... Samples were boiled for 10 minutes at 95°C before separation on a gradient of 4-20% SDS-PAGE gels (Bio-Rad). Samples were then transferred to nitrocellulose membrane using standard methods for either semi-dry or wet transfer (Bio-Rad) ...
-
bioRxiv - Plant Biology 2024Quote: ... and 500nmol of each primer and annealing temperature of 59 °C on a CFX Connect Real-Time PCR Detection System (Bio-Rad) at 95 °C for two minutes followed by forty cycles of 95 °C for 15 seconds and 59 °C for 30 seconds ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were centrifuged for 30 min at 20,000 x g at 4 °C and protein concentrations of the supernatants were measured with standard Bradford assay (Bio-Rad Laboratories). 25 or 50 µg of proteins were diluted in Laemmli buffer 3× (188 mM Tris-HCl ...
-
bioRxiv - Microbiology 2024Quote: ... The samples were then treated according to the instruction of the beads and the protein complexes were then eluted by incubating at 99°C for 5 minutes with Laemmli Sample Buffer (1610747, Bio-Rad).
-
bioRxiv - Microbiology 2024Quote: ... 30-50 μg of total protein was boiled at 99°C for 5 minutes with the addition of Laemmli Sample Buffer (1610747, Bio-Rad) containing 1% 2-Mercaptoethanol in a total volume of 60-80 μl ...
-
bioRxiv - Microbiology 2024Quote: ... Supernatants were mixed with reducing SDS sample buffer and incubated for 5 min at 95°C prior to fractionation by SDS-PAGE analysis on 4–15 % Mini-PROTEAN TGX Stain-Free Protein Gels (Bio-Rad). Western Blot analysis was performed as described previously (15).
-
bioRxiv - Molecular Biology 2024Quote: ... The membrane was then incubated overnight at 4°C with a 1:1000 concentration of anti-6×His tagged monoclonal antibody produced in mouse (ABD Serotec Biorad, UK). Then ...
-
bioRxiv - Molecular Biology 2024Quote: ... Target amplification and real-time signal collection were carried out at 66°C for 60 mins on CFX96 Touch Real-Time PCR Detection System from Bio-Rad.
-
bioRxiv - Molecular Biology 2023Quote: ... The proteins were eluted by heating the beads (95°C for 5 min.) in 70 μL of BME 4X Laemmli buffer (Biorad #1610747). Prior to loading on a 7.5% TGX SDS-PAGE gel (Biorad #5671024) ...
-
bioRxiv - Microbiology 2024Quote: ... 20µg of protein samples were heated in 1X Laemmli buffer at 95°C for 5 min and loaded on pre-cast 4-20% SDS-polyacrylamide electrophoresis gel (Bio-Rad). For the RIP experiment ...
-
bioRxiv - Neuroscience 2024Quote: ... incubated overnight with primary antibody in 5% milk in TBST at 4 °C and subsequently washed in TBST and incubated for 1 hours at room temperature with HRP-linked secondary antibody (Bio-Rad) in 5% milk in TBST ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were denatured at 95°C for 10 min and run on 4-20% Criterion TGX Precast Midi Protein gels (Bio-Rad). Resolved protein was transferred to nitrocellulose using Trans-Blot turbo transfer packs ...
-
bioRxiv - Neuroscience 2024Quote: ... via wet transfer at 30V for 1 hour at 4 °C in 10% Methanol Tris/Glycine buffer using a Criterion™ Blotter (BioRad). Blots were all blocked for 1 hour at room temperature using Intercept (TBS ...
-
bioRxiv - Molecular Biology 2024Quote: ... 0.5% of total input and 15% of total IP fraction were resolved on 10% SDS-PAGE gels and wet transferred onto a 0.45 µm nitrocellulose membrane for 2 h at 80 V and 4°C (Bio-Rad, Germany). The membrane was blocked for 1 h in 5% BSA in PBST (PBS + 0.2% Tween20) ...
-
bioRxiv - Molecular Biology 2024Quote: ... followed by a 10 min final extension at 72°C before resolving on a 5% polyacrylamide tris-borate-EDTA (TBE) gel (Bio-Rad) at 35 V ...
-
bioRxiv - Biochemistry 2024Quote: ... Images were collected following 5 days of incubation at 30 °C with a Bio-Rad Chemidoc MP Imaging System (Bio-Rad) and analyzed using the ImageJ software (50).
-
bioRxiv - Biochemistry 2024Quote: ... The plates were incubated overnight at 37°C and were imaged the next day using a ChemiDoc Imaging System (Bio-Rad).
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were cleared by centrifugation (10 min at 14,000 x g, 4°C) and quantified by Bradford (Bio-Rad, cat#5000205). All samples were then boiled for 5 min in Laemmli sample buffer ...
-
bioRxiv - Cancer Biology 2024Quote: ... The samples were then transferred to a PVDF membrane at 400mA for 2 hours at 4°C in 1x Tris/Glycine buffer (1610771, Bio-Rad). Membranes were then blocked in casein blocking buffer (PI37528 ...
-
bioRxiv - Cancer Biology 2024Quote: ... The insoluble material was separated at 13,000 rpm for 30 minutes at 4 °C and total protein concentration was measured on supernatants using Bradford reagent (Bio-Rad). Protein extracts were denatured with NuPAGE®LDS (Invitrogen ...
-
bioRxiv - Biochemistry 2024Quote: Samples were incubated at 95°C for 10 minutes and loaded onto SDS-polyacrylamide gels (Mini-Protean TGX gels 4-20%, Bio-Rad). Following gel electrophoresis ...
-
bioRxiv - Neuroscience 2023Quote: ... Samples were boiled at 100°C for 5 min after addition of 50 µl of 4x Laemmli sample buffer (BioRad, 1610747) containing 2-Mercaptoethanol (BME) ...
-
bioRxiv - Molecular Biology 2023Quote: ... containing 2-Mercaptoethanol at 95°C for 10 min and separated by electrophoresis in Any kDTM Mini-PROTEAN TGX precast gel (Bio-Rad) and transferred to a PVDF membrane (Bio-Rad) ...
-
bioRxiv - Cell Biology 2019Quote: ... Samples were sonicated and heated at 95°C for 5 minutes before their separation on a 4-15% gradient SDS PAGE gel (Biorad, 4-15%). Proteins were transferred from gel to nitrocellulose membrane using semi-dry method ...
-
bioRxiv - Developmental Biology 2021Quote: ... Additional pre-absorption controls were performed in which the anti-IL-6 antibody was incubated overnight at 4 °C with a 10 fold molar excess of recombinant chicken IL-6 (1.67 μM; Bio-Rad Laboratories, Inc.) before immunolabeling fixed sections of chick ocular tissues ...
-
bioRxiv - Neuroscience 2021Quote: ... Total RNA was purified with DNase and incubated at 37°C for 30 minutes using a thermocycler (Bio-Rad, Hercules, CA, USA). cDNA was synthesized using an iScript kit (Bio-Rad) ...
-
bioRxiv - Neuroscience 2021Quote: ... were mixed with filtered monomeric α-syn WT (30 μM) and ThT (10 μM) and were incubated at 55°C for 5 h in a PCR machine (Bio-rad, C1000) for amplification.[3] Fractions comprised of ≥ 76% of its original volume were mixed with α-syn and ThT to reach a final volume of 20 μL per reaction ...
-
bioRxiv - Molecular Biology 2020Quote: ... followed by 40 cycles of denaturation at 95°C for 10 seconds and extension at 60°C for 30 seconds on the Bio-Rad CFX-96 qPCR machine (Bio-Rad, UK). Data were analysed with CFX-manager software v.3.1 ...
-
bioRxiv - Molecular Biology 2021Quote: 5 μg of cheRNA or total RNA for each condition were denatured at 95°C for 5 min and transferred to a Hybond-XL membrane (Amersham) in a Bio-Dot® Microfiltration Apparatus (Bio-Rad) following manufacturer’s intructions ...
-
bioRxiv - Zoology 2019Quote: ... followed by extension at 72°C for 10 min in a T100™ Thermal Cycler (Bio-Rad Laboratories, Inc. Hercules, CA, USA). PCR products were run against a Genescan™ 500 LIZ™ internal size standard on an ABI 3130 Genetic Analyzer (Applied Biosystems ...
-
bioRxiv - Synthetic Biology 2020Quote: ... and MgCl2 [12.5 mM]) and annealed by cooling the solution from 95 to 12 °C over 30 min in a thermal cycler (Bio-Rad, T100). Detailed descriptions for the assembly of individual gate complexes are described in the supplementary information ...
-
bioRxiv - Genomics 2021Quote: ... at 4°C in 1×TAE buffer (40 mM Tris-acetate, 1 mM EDTA) using 0.55% Certified Megabase agarose gel (Bio-Rad, 161-3109). Short-range PFGE ran at 4.2 or 4.5 V/cm with a pulse time from 40 to 70 s for 24 h ...
-
bioRxiv - Biochemistry 2020Quote: ... protein was eluted from the beads by boiling for 5 minutes at 95°C in Laemmli Sample Buffer (BioRad, catalog #161-0747). Proteins were stored at −80°C until western blotting.
-
bioRxiv - Cancer Biology 2020Quote: ... To reduce non-specific binding single cell suspensions were incubated for 5 min at 4°C with PBS/10% AB-serum (Bio-Rad, Germany), subsequently stained with fluorescence-labeled or biotinylated antibodies for 15 min at 4°C and washed once with PBS/2% FCS/0.01% NaN3 ...
-
bioRxiv - Neuroscience 2020Quote: Binding kinetic of the purified Fabs to full length PrP was monitored at 25 °C using ProteOn XPR36 surface plasmon resonance biosensor (Bio-Rad Laboratories). Mouse recPrP23–231 was immobilized on a carboxymethylated-dextran sensor chip (CM5 ...
-
bioRxiv - Plant Biology 2020Quote: ... The mixture was kept for 5 min at 95°C and 5 min on ice before loading on a TGX 4-20% Strainfree (Bio-Rad US) gel immersed in TGS 1X buffer ...
-
bioRxiv - Microbiology 2020Quote: ... Reactions were run for 14 hours at 40°C followed by analysis of samples by SDS-PAGE using 4-20% Criterion™ polyacrylamide gels (Bio-Rad) and visualized with GelCode Blue stain (ThermoFisher).
-
bioRxiv - Biophysics 2020Quote: ... the RNC samples from the above sucrose cushions were heated at 55 °C for 5 min in the presence of 1X Laemmli Sample buffer (Bio-Rad, 1610737). Subsequently ...
-
bioRxiv - Cell Biology 2021Quote: ... Lysates were cleared by centrifugation at 4°C for 15 minutes at 16,000 g and protein concentration was measured by the Bradford method (Bio-Rad, Hercules, USA). Next ...
-
bioRxiv - Cell Biology 2021Quote: ... Selected siRNAs were spotted onto a gridded MatTek dish (P35G-2-14-C-GRID) using a contact spotter (ChipWriter Pro-Bio-Rad Laboratories) resulting in a layout of 4 × 8 spots 40 ...
-
bioRxiv - Microbiology 2022Quote: ... The melt curve analysis was performed at 65°C for 1 minute in CFX connects TM Real-time PCR detection system (Bio-Rad, USA). The primers used are listed inTable 1 ...