Labshake search
Citations for Beckman :
1351 - 1400 of 1603 citations for tert Butyl trans 17 bromo 4 7 10 13 tetraoxa 15 heptadecenoate since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2021Quote: ... supernatants were collected and centrifuged with 150.000 x g (at rav) for 30 min at 4 °C using an Optima™ MAX-XP Ultracentrifuge (Beckman Coulter; TLA120.2 rotor). Pellets were resuspended in PBS and 4 µg of primary antibody were added for 30 min ...
-
bioRxiv - Genomics 2021Quote: ... The spores were washed twice with sterile ddH2O and pelleted at 3700g for 5 min at 4 °C in an Allegra X-12R centrifuge (Beckman, Brea, CA, USA). Spores were resuspended in sterile ddH2O and kept at 4°C until experiments.
-
bioRxiv - Biochemistry 2020Quote: ... The sample was centrifuged at 4°C for 1 hour and 40 minutes at 182,753 x g (38,000 rpm in a Beckman Coulter Type 42.2 Ti rotor).
-
bioRxiv - Neuroscience 2021Quote: ... The resulting lysates were centrifuged at 100,000Xg for 30-60 min at 4°C in an Optima TLX tabletop ultracentrifuge using a TLA-110 rotor (Beckman Coulter, Fullerton, CA). The clarified supernatants were removed and transferred into the new tubes ...
-
bioRxiv - Biochemistry 2020Quote: ... Unbroken cells were pelleted by centrifugation at 18,000 RCF for 30 min at 4°C (Beckman centrifuge J-20-XP, Rotor JA16.250, DE). The supernatant was transferred to 45 TI rotor (Beckman ...
-
bioRxiv - Bioengineering 2021Quote: ... The samples were then centrifuged at 12,000 g for five minutes at 4°C to remove tissue debris with a Microfuge™ 22R centrifuge (Beckman Coulter, Brea, CA). The RNA was extracted using the Invitrogen PureLink™ RNA Mini Kit (Thermo Fisher ...
-
bioRxiv - Microbiology 2021Quote: ... and extracellular vesicles including exosomes and virions were pelleted by ultracentrifugation at 141,000 g at 4 °C for 2 h in a swinging-bucket rotor (SW28; Beckman Coulter, Brea, CA, USA). The pellet was resuspended in filtered PBS and centrifuged at 18,300 g and 4°C for 10 min to remove insoluble aggregates ...
-
bioRxiv - Microbiology 2021Quote: ... resuspended in 150 μl 0.1 M HEPES/NAOH pH 7.0 and purified for 48 h (250,000 × g, 4 °C; Beckman Optima LE-80K, rotor SW60-Ti) using a CsCl gradient (0.45 g/ml ...
-
bioRxiv - Molecular Biology 2020Quote: ... and centrifuged at 10,000xg for 30 minutes at 4°C in a Beckman Coulter Optima XE-100 (fitted with a SW41Ti Rotor (Beckman Coulter, CA USA)) ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were fractionated by OptiPrep density gradient ultracentrifugation (100,000 × g, 18 h, 4 °C) using a SW41 rotor (Beckman Coulter, Fullerton, CA, USA) through a continuous 5–40% OptiPrep (Sigma-Aldrich ...
-
bioRxiv - Immunology 2022Quote: ... followed by ultracentrifugation at 110,000 × g for 90 min at 4°C on an Optima XPN -100 ultracentrifuge with SW32Ti rotor (Beckman Coulter, Brea, CA, USA). The isolated EVs was washed with PBS and followed with a secondary ultracentrifugation (110,000 × g for 90 min at 4°C) ...
-
bioRxiv - Genomics 2020Quote: ... were layered onto a 1.8M sucrose cushion and ultra-centrifuged at 24,400 rpm at 4°C for 2 hours using a SW28 swinging bucket rotor (Beckman Coulter Optimal centrifuge #L90K). The nuclear pellet was re-suspended in 2% BSA in 1X PBS ...
-
bioRxiv - Microbiology 2020Quote: ... EMVs were obtained by ultracentrifugation from 4 mL of filtrate at 100,000 × g (average centrifugal force) and 4°C for 2 h with an OptimaX centrifuge (Beckman Coulter, Brea, CA, USA). The pellets were resuspended in 400 μL of Dulbecco’s phosphate-buffered saline (DPBS ...
-
bioRxiv - Neuroscience 2022Quote: ... The tubes were sealed and centrifuged at 50,000 rpm at 4°C for 2 h in an OptimaTM L-90K ultracentrifuge using the 70.1Ti rotor (Beckman Coulter, Brea, CA, USA). After the centrifugation ...
-
bioRxiv - Biochemistry 2020Quote: ... Unbroken cells were pelleted by centrifugation at 18,000 RCF for 30 min at 4°C (Beckman centrifuge J-20-XP, Rotor JA16.250, DE). The supernatant was transferred to 45 Tl rotor (Beckman ...
-
bioRxiv - Microbiology 2021Quote: ... Ten milliliters of allantoic or amniotic fluid was centrifuged at maximum speed (16,000 × g) for 30 min at 4 °C using a floor ultra centrifuge (Beckman Optima L-60 Ultracentrifuge). After removal of the supernatant ...
-
bioRxiv - Bioengineering 2023Quote: ... The diluted sample was then centrifuged using a Beckman ultracentrifuge (Optima L90K) with two cycles of 1h10 at 110,000 x g at 4°C (rotor type 70Ti, Beckman Floor Ultracentrifuge Optima L90K). Between them ...
-
bioRxiv - Cell Biology 2024Quote: ... and centrifuged at 16,500 × g (14,500 rpm) at 4°C for 20 min using a Type Ti 45 fixed-angle rotor (Beckman Coulter, k-factor 1.275) to isolate large EVs ...
-
bioRxiv - Biophysics 2023Quote: ... Virions were banded by density gradient centrifugation at 152,000 x g for 16 h at 4°C in a SW41 rotor (Beckman Coulter SRL, Milan, Italy). The gradient was then fractionated ...
-
bioRxiv - Biochemistry 2023Quote: ... expression from the viral backbone and cells harvested between 72h-84h after cell proliferation arrest by centrifugation at 1200g for 15min at 4°C (Beckman Coulter centrifuge, JLA8.1000). Further ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor, Beckman Avanati J-25, Beckman Coulter). The resulting pellets were washed again and resuspended in 500 μl potassium phosphate buffer ...
-
bioRxiv - Microbiology 2022Quote: ... then clarified by centrifugation at 2000 rpm at 4°C for 5 min in a refrigerated tabletop centrifuge (Beckman Coulter, Indianapolis IN, USA) to remove large debris ...
-
bioRxiv - Cancer Biology 2022Quote: ... the sample was centrifuged at 268,000 ×g at 4°C for 38 min with an MLA-50 rotor (Beckman Coulter, Brea, CA, USA). The top layer and subsequent 10 fractions (fractions 1–10 ...
-
bioRxiv - Plant Biology 2023Quote: ... The disrupted cells were subjected to ultracentrifugation at 4°C and 235000 g for 1h (Beckman Optima™ L-80 XP, rotor Ti45). The resulting supernatant was loaded onto an Äkta purifier system (GE HealthCare ...
-
bioRxiv - Cancer Biology 2023Quote: ... the supernatant was ultracentrifuged at 100,000 × g at 4°C for 90 min using Beckman Coulter Optima™ XE-90 Ultracentrifuge (Beckman Colter, Brea, CA) equipped with Type 45 Ti rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the resulting G-actin mix was ultracentrifuged at 90K rpm for 30 minutes at 4°C in an ultracentrifuge (Beckman, Optima TL 100) to remove actin oligomers and/or aggregates.
-
bioRxiv - Microbiology 2024Quote: ... The solution was then given a final concentration of 25 mM MgCl2 and ultracentrifuged at 200,000 x g for two hours (4°C) (Beckman Coulter Type 45 Ti). The pellet was then resuspended in 100 μl of distilled water.
-
bioRxiv - Microbiology 2024Quote: ... The 1 ml fraction containing the phage was then placed on a 40% (w/v) - 60% (w/v) sucrose gradient for 1 hour at 63,400 x g at 4°C (Beckman Coulter SW 40 Ti). The 1 ml fraction was then placed in a 50 kDa dialysis membrane (Spectrum Labs ...
-
bioRxiv - Microbiology 2024Quote: The virus solutions were centrifuged at 106800 × g for 3 hours at 4 °C using a SW32Ti rotor (Beckman Coulter, Fullerton, CA, USA). The virus pellets were suspended in phosphate-buffered saline (PBS) ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was fractionated at 200 k x g for 20 minutes at 4°C using a Beckman Optima Ultracentrifuge with TLA110 rotor (Beckman Coulter Life Sciences) into a cytosolic (s200 ...
-
bioRxiv - Neuroscience 2024Quote: ... cells were harvested and lysed in the lysis buffer described above and ultracentrifuged at 100,000 x g for 30 min at 4 °C using the TLA-110 rotor and the Optima™ MAX-XP tabletop ultracentrifuge (Beckman, Brea, CA). The supernatants were collected as “triton-soluble fraction” and the pellets were washed with the lysis buffer ...
-
bioRxiv - Biochemistry 2024Quote: ... Nucleosome sucrose gradients were then centrifuged at 41,000 rpm and 4°C for 22 h in a SW41 Ti rotor in an Optima L-100 XP ultracentrifuge (Beckman Coulter, Brea, CA). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... The A2aR-expressing membrane fraction was obtained by ultra- centrifugation at 100,000 g for 1 hour at 4°C in a Type 70 Ti Fixed-angle rotor (Optima XPN ultracentrifuge, Beckman Coulter Life Sciences). The pellet (membrane fraction ...
-
Scalable Fabrication of a Tough and Recyclable Spore-Bearing Biocomposite Thermoplastic PolyurethanebioRxiv - Bioengineering 2024Quote: ... Spore suspension was centrifuged at 12,000 g at 4 °C for 20 min (Avanti J-E, Beckman Coulter Life Science, Brea, CA, USA). After removing supernatant ...
-
bioRxiv - Cell Biology 2024Quote: ... The supernatant was subsequently ultracentrifuged at 30,000 × g for 60 min at 4°C in an SW32Ti rotor (Beckman Coulter, Brea, CA, USA) to obtain L-EVs ...
-
bioRxiv - Biochemistry 2024Quote: ... samples from different temperatures for each drug treatment were pooled and subjected to ultracentrifugation at 100,000g for 20 minutes at 4°C (Beckman Coulter Optima Max-XP). The soluble proteins from the supernatant were collected for further analysis.
-
bioRxiv - Cell Biology 2024Quote: ... Microsomes were enriched at 200 k x g for 20 minutes at 4°C using a Beckman Optima Ultracentrifuge with TLA110 rotor (Beckman Coulter Life Sciences) and washed twice with MIB ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... Five to 10 individuals from each line were used for DNA extraction (Agencourt DNAdvance kit, Beckman-Coulter). Individuals were homogenized using metal beads and a bead beater prior to DNA extraction ...
-
bioRxiv - Bioengineering 2021Quote: Cells were harvested by centrifugation at 5000 rpm for 10 min in an JLA-9.1000 rotor (Beckman). The bacterial pellet was resuspended in 20 ml lysis buffer (50 mM Bis-Tris-HCl (pH 6.8) ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were harvested by centrifugation at 5000 rpm for 10 min in a JLA-9.1000 rotor (Beckman). The bacterial pellet was resuspended in 20 ml lysis buffer (50 mM Tris-HCl (pH 8) ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were harvested by centrifugation at 5000 rpm for 10 min in a JLA-9.1000 rotor (Beckman). The bacterial pellet was resuspended in 20 ml lysis buffer (50 mM Tris-HCl (pH 8) ...
-
bioRxiv - Cell Biology 2021Quote: ... The microtubules were then pelleted (all pelleting was 10 min at 30 psi in a Beckman Airfuge), the pellet was resuspended in cold BRB80 and incubated on ice for 30 min ...
-
bioRxiv - Microbiology 2020Quote: The performance of the cell sorter was also evaluated by sorting fluorescent beads (10 μM, Beckman Coulter) within 384 plates (optically clear flat bottom ...
-
bioRxiv - Developmental Biology 2022Quote: ... Lentivirus containing >10 kb length insert (inducible CRISPRi) was concentrated using AVANTI J-30I centrifuge (Beckman Coulter) with JS-24.38 swing rotor at 72000g for two hours at 4°C and pellets were dissolved in 200 µl PBS ...
-
bioRxiv - Neuroscience 2022Quote: ... was propagated in Vero cells using a 10-30% sucrose gradient in an ultracentrifuge (Beckman L8-55), and the yield titrated using the classic Reed and Muench formula 20 ...
-
bioRxiv - Immunology 2022Quote: ... Samples were centrifuged for 10 minutes at 3,800 RPM in a JA-12 rotor (Beckman Coulter Inc.) and the bottom layer collected ...
-
bioRxiv - Biochemistry 2022Quote: ... Polymerised MTs were pelleted at 313,000g for 10 min at 25°C using TLA100 rotor (Beckman Coulter), and the pellet was washed with BRB80 buffer ...
-
bioRxiv - Microbiology 2022Quote: ... 10 µM dihydroartemisinin (reference compound) or DMSO (0.2%) was dispensed using an Echo acoustic dispenser (Beckman Coulter). The assay was incubated for 48 or 72 hours at 37 °C ...
-
bioRxiv - Microbiology 2020Quote: ... Lysates were then layered onto 10-50% sucrose gradients in thinwall polypropylene ultracentrifuge tubes (Beckman Coulter; 331372). Gradients were then centrifuged at 38,000 RPM for 135 min in a SW41Ti rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2022Quote: ... After centrifugation of the suspension for 10 min at 5000 g (Beckman Coulter Allegra X30-R Centrifuge), the supernatant was decanted and the wet solid was washed four times (resuspended in autoclaved MilliQ water ...