Labshake search
Citations for Beckman :
1451 - 1500 of 1935 citations for 6H Pyrazolo 3 4 g benzothiazole 2 methyl 8CI since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genomics 2019Quote: ... The reaction was next cleared by 2× AmpureXP beads (Agencourt AMPure XP, Beckman Coulter) and eluted in 75 μl EB (10 mM Tris-HCl pH 8) ...
-
bioRxiv - Cancer Biology 2021Quote: ... resuspended in 300μl PBS/2%FBS and FACS analysed on Gallios® (Beckman Coulter) or ARIAIII (BD) ...
-
bioRxiv - Physiology 2019Quote: ... RNA was then cleaned using 2 volumes of Agencourt RNAClean XP (Beckman Coulter, A63987) beads under the standard protocol ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Illumina RNASeq sequencing (HiSeq 2000, 2 × 75 pb) and trimming were performed by Beckman Coulter Genomics ...
-
bioRxiv - Biophysics 2023Quote: ... 2 mM DTT) with 0.7 M sucrose in Type 45 Ti tubes (Beckman-Coulter). Ribosomes were pelleted by centrifugation at 27,000 rpm (57,000 xg ...
-
bioRxiv - Cancer Biology 2023Quote: ... concentrated for 2 h by ultracentrifugation in swing-out rotor SW-32Ti (Beckman Coulter), 26,000g ...
-
bioRxiv - Physiology 2023Quote: ... Samples were ultracentrifuged at 100,000 rpm at 16°C for 2 hours (rotor: Beckman TLA-100 ...
-
bioRxiv - Systems Biology 2023Quote: ... Adapter ligation was followed by 2 successive Agencourt AMPure XP bead purifications (Beckman Coulter) and library amplification by a Plasmodium-optimized KAPA PCR amplication protocol ...
-
bioRxiv - Molecular Biology 2023Quote: ... and ultra-centrifuged for 2 hours at 20,000 rpm in an SW28 rotor (Beckman). Viral pellets were resuspended in 250 µL PBS and flash-frozen ...
-
bioRxiv - Microbiology 2024Quote: ... and 2 mM dithiothreitol (DTT)) and centrifuged in an SW-41 Ti rotor (Beckman) for 2 h at 40,000 rpm ...
-
bioRxiv - Plant Biology 2020Quote: MP of pollen protoplasts was assessed by staining with 1 µM DiBAC4(3) for 5 min (Breygina et al. 2010) on Gallios flow cytometer (Beckman Coulter), analysis was performed with FlowJo software (TreeStar) ...
-
bioRxiv - Genetics 2020Quote: ... PCR products were pooled by region of interest using 2-3 μL of each reaction and the resulting pools of products were purified using a 1X Ampure XP cleanup (Beckman Coulter). Purified libraries were pooled and submitted for paired-end 150 cycle sequencing on an Illumina MiSeq ...
-
bioRxiv - Genomics 2021Quote: ... Cells were washed with 25 mm supplemented HBSS before depleting the sample of unnucleated cells using IOTest 3 Lysing solution (Beckman Coulter) following provider instructions ...
-
bioRxiv - Microbiology 2021Quote: ... triplicate spore preparations were made in 3 ml of 20% glycerol and suspended in Isoton II (Beckman Coulter, Brea, CA, USA). The particle volume was then measured for a minimum of 100 000 particles per sample using a Multisizer 4e Coulter counter (Beckman Coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... with densities ranging from 1.10 to 1.15 were pooled and washed in PBS (Beckman Ti50, 3 h at 42 000 rpm).
-
bioRxiv - Microbiology 2022Quote: A 3 ml volume of pseudoparticles was pelleted using a TLA-55 rotor with an Optima-MAX-E ultracentrifuge (Beckman Coulter) for 2 hours at 42,000 rpm at 4°C ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were then enriched in DNA sizes between 200 and 600 bp (corresponding to 1 to 3 nucleosomes) using AMPure XP magnetic beads (Beckman-Coulter), following the manufacturer’s guidelines ...
-
bioRxiv - Cell Biology 2020Quote: ... 3 ml of 50% and 3 ml of 40% sucrose) in Ultra-Clear Beckman tubes and centrifuged at 26000 rpm (SW32Ti rotor, Beckman Coulter) for 1 h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... and pelleted for 3 min in a swing-out rotor at 1000 rpm in a tabletop centrifuge (Allegra X-30R, Beckman Coulter). The supernatant was aspirated and cells were suspended in the remaining liquid to 1 × 105 – 1 × 107 cells/100 μl ...
-
bioRxiv - Genomics 2020Quote: ... We carried out the first round of PCR for 3 cycles and purified the reactions with Ampure XP beads (Beckman-Coulter). We then carried out a second round of PCR with primers targeting the P5 and P7 sequences only ...
-
bioRxiv - Bioengineering 2022Quote: ... Supernatant (33 mL) was placed on a 3 mL 25% (w/v) sucrose pad in SW28 tube (Beckman, Brea, CA, USA) and centrifuged at 24,000 rpm ...
-
bioRxiv - Cancer Biology 2022Quote: ... Cells were harvested after 3 days and counted using a Z2 Coulter Particle Count and Size Analyzer (Beckman Coulter, Brea, CA).
-
bioRxiv - Molecular Biology 2024Quote: ... bottom layer was made by diluting OptiPrep™ solution with clarified HM or digesta sample (2.25 mL OptiPrep™ + 0.75 mL sample = 3 mL) into a 5 mL open-top thin wall ultra-clear tube (Beckman Coulter). A discontinuous gradient was made with 40% (w/v) ...
-
bioRxiv - Cancer Biology 2024Quote: ... The percentage of fluorescence-positive cells was determined initially (baseline reference, passage 0, 3 days after transduction) and all following passages using the CytoFLEX Flow Cytometer (Beckman Coulter). In each passage ...
-
bioRxiv - Cancer Biology 2023Quote: Counting of CB CD34+ cells after 3 days of ex vivo co-culture was accurately obtained with flow-count fluorosphere beads (Beckman Coulter), in combination with the following antibodies ...
-
bioRxiv - Genetics 2023Quote: ... the cell pellet was resuspended in PBS supplemented with 2 % FCS and nucleated cells were counted in methylene blue with 3 % acetic acid on a Vi-Cell XR cell viability counter (Beckman Coulter). 10 × 106 bone marrow cells were resuspended in 200 μl of PBS supplemented with 2 % FCS containing the following antibody solution ...
-
bioRxiv - Cell Biology 2023Quote: ... 30% Percoll (v/v)] followed by 3 mL of MRB in a 13 mL ultracentrifuge tube (Beckman Instruments, Inc, CA 331372) and spun at 95,000 x g for 45 min in a TH641 rotor ...
-
bioRxiv - Microbiology 2021Quote: ... The cell-free extract was layered on top and the gradients were centrifuged at 85365 x g (average relative centrifugal force in a Beckman Coulter SW 40 Ti swing bucket rotor) for 16 hours at 4 °C (81) ...
-
bioRxiv - Biophysics 2021Quote: ... Cell debris was removed by centrifugation (12,000x□g for 15□min at 4°C) and membranes were then pelleted at 45,000 rpm in a Type 45 Ti rotor (Beckman) for 3□h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (40 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was filtered (0.45 μm ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (25 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was incubated with GSH beads (GE Healthcare ...
-
bioRxiv - Microbiology 2020Quote: ... of 1.5 mL and then centrifuged 45 min at 100,000g at 4°C in a TLA-100 ultracentrifuge (Beckman Coulter). The supernatant contains the soluble fraction and the pellet corresponds to the total membranes ...
-
bioRxiv - Cell Biology 2019Quote: ... The resulting gradients were subjected to ultracentrifugation at 4°C for 14 hrs at 41,000 rpm in an SW41 Ti rotor (Beckman), and then fractionated ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... The filtered supernatant from one 400 ml batch was then pelleted (1.5 hour at 24 000 rpm at 4 °C with Beckman Coulter L-90K centrifuge and 45 Ti rotor ...
-
bioRxiv - Biophysics 2022Quote: ... The sample was loaded on top of the glycerol gradient and centrifuged at 4°C for 18 h at a speed of 35,000 rpm in SW-41Ti rotor (Beckman). Fractions of 500 μL were collected ...
-
bioRxiv - Microbiology 2020Quote: ... Phage were pelleted by centrifugation at 82705 xg (25,000 rpm) for 4 hours using an SW28Ti rotor (Beckman Coulter). Phage pellets were gently resuspended overnight in 1 mL of phage buffer at 4°C with shaking ...
-
bioRxiv - Genomics 2021Quote: ... we filtered the virus-laden media through a 0.22μm PES filter and then concentrated viral particles by ultracentrifugation at 24,000 rpm for 1.5 hours (4°C) with an SW-32Ti swinging bucket rotor (Beckman Coulter). We resuspended the viral pellet in iPS-Brew at 1/200th the original supernatant volume and then stored 50-100 μl aliquots at −80°C.
-
bioRxiv - Immunology 2021Quote: Cells were analyzed using 4-to 6-color direct immunofluorescence staining on a Cytoflex LX or S (Beckman Coulter) flow cytometer ...
-
bioRxiv - Biochemistry 2020Quote: ... and were centrifuged for 4 min at 46 000 rpm at 4°C in a Optima MAX-XP Ultracentrifuge with a TLA 100.3 rotor (Beckman). The pellet was suspended in (20 µl ...
-
bioRxiv - Cancer Biology 2021Quote: ... Libraries were further amplified 4–6 PCR cycles as described [43] and purified using AMPure XP beads (Beckman Coulter). ATAC-seq libraries were subsequently sequenced 2 x 75 bp on an Illumina NextSeq500.
-
bioRxiv - Biochemistry 2020Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Biochemistry 2021Quote: ... 1□mM EDTA) and centrifuged at 25000 rpm for 1 hour at 4°C (Beckman Coulter SW41-Ti rotor). Mitochondria forming a band at the interphase between the 1 M and 1.5 M sucrose were collected and resuspended in 10 mM Tris-HCl pH = 7.5 in 1:1 ratio ...
-
bioRxiv - Biochemistry 2020Quote: ... Cell debris was removed by centrifugation at 14,800 rpm for 20 minutes 4 °C in F241.5P rotor using 149 Microfuge 22R centrifuge (Beckman Coulter). The supernatant was combined with 100 μL of ANTI-FLAG M2 Affinity Gel (Sigma ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were collected by centrifugation (8 000 rpm for 10 min at 4 °C, JLA-16.25 Beckman Coulter rotor), pellets frozen in liquid nitrogen and stored at −80°C ...
-
bioRxiv - Microbiology 2020Quote: ... supernatants were harvested and filtered through a 0.45μm filter and centrifuged at 27,000 rpm for 3h at 4°C with a SW41 rotor and Optima L-90 centrifuge (Beckman). Pellets were resuspended in PBS prior to use for western blot analysis.
-
bioRxiv - Microbiology 2020Quote: ... The gradient was centrifuged for 17 h at 4°C and 100,000 rcf (23,700 rpm) using an SW 40 Ti rotor (Beckman Coulter), followed by manual fractionation into 20 590 μl fractions and measurement of the A260 nm of each fraction ...
-
bioRxiv - Microbiology 2020Quote: ... the 100,000xg centrifugation was performed for 1h at 4°C using a SW41 TI swinging bucket rotor (Beckman Coulter). The pellet was then resuspended in 50 μL or 1500 μL of D-MEM for subsequent analysis.
-
bioRxiv - Neuroscience 2019Quote: ... of the lysates were loaded on top of the gradients and spun at 36,000 rpm at 4°C for 2h with a SW41-Ti rotor (Beckman). Fractions from each sample were collected every 9 sec using a density gradient fractionation system (Teledyne Isco ...
-
bioRxiv - Molecular Biology 2020Quote: ... The reactions were then spun for 20 min at 120,000 rpm at 4°C (TLA120.1 rotor, Beckman Coulter, USA) to remove aggregates and ribosomes ...
-
bioRxiv - Cell Biology 2022Quote: ... and centrifuged at 10,000g and 4°C for 30 minutes (SW41 rotor, Optima XPN-100 ultracentrifuge; Beckman Coulter, Inc.) to remove any potential large debris ...