Labshake search
Citations for Beckman :
1151 - 1200 of 1299 citations for Borrelia burgdorferi C p Protein since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... re-suspend in the homogenization buffer and centrifuged at 100,000 x g for 40 min at 4°C (Beckman SWTi41 swing rotor). The pellet containing the growth cone were re-suspended in 50 μl of the homogenization buffer ...
-
bioRxiv - Neuroscience 2022Quote: ... The loaded gradient was ultracentrifuged at 69,150 x g for 1 h at 4 °C (SW 41 Ti Swinging-Bucket Rotor, Beckman Coulter, Cat. #331362) and the synaptosome fraction was harvested from the interface between the two sucrose layers ...
-
bioRxiv - Biochemistry 2022Quote: ... The supernatant was again centrifuged at 100000 g for 45 min at 4°C (Beckman Optima™ MAX-XP Rotor MLS-50). After filtering the supernatant through a 0.22 μm syringe filter ...
-
bioRxiv - Cell Biology 2022Quote: ... One milliliter of concentrated conditioned medium was pipetted on top of the gradient and samples were centrifuged for 18 h at 100,000 ×g and 4 °C using a SW 32.1 Ti rotor (Beckman Coulter, Fullerton, California, USA). Fractions of 1 mL were collected from the top and EV-rich fractions 9 and 10 (corresponding to a density of 1.10-1.12 g/mL ...
-
bioRxiv - Cancer Biology 2024Quote: ... The plates were then centrifuged at 2000 rpm (931 x g) for 2h at 30°C (Allegra® X-15R Centrifuge (Beckman Coulter), rotor SX4750A) ...
-
bioRxiv - Microbiology 2024Quote: ... Saliva was collected by expectoration into tubes on ice followed by centrifugation for 10 minutes at 4°C at 4000 x g (Beckman SX4750 rotor) to remove large debris and bacterial aggregates ...
-
bioRxiv - Biophysics 2024Quote: ... The gradients were then centrifuged at 187,000 × g for 4 h at 4°C in a SW 41 Ti rotor (Beckman Coulter, Brea, CA). Bands corresponding to purified virus particles (∼1.36 g/mL ...
-
bioRxiv - Cell Biology 2024Quote: ... The collected monosomes were then 1:1 diluted with PEB and centrifuged at 60,000 rpm at 4°C overnight on an SW65 Ti ultracentrifuge rotor (Beckman Coulter, California, USA). The pellets were resuspended in 250µl PEB with 50 mM NH4Cl ...
-
bioRxiv - Cell Biology 2024Quote: ... Samples were centrifuged at 60,000 rpm at 4°C for 2 h on an SW65 Ti ultracentrifuge rotor (Beckman Coulter, California, USA). The pellets were gently washed by dispensing and removing 500 µl of ice-cold RNase-free water ...
-
bioRxiv - Biochemistry 2023Quote: ... Cultures were then recovered by centrifugation (4,000 x g, 4 °C, 40 min in a Beckman Avanti JXN-26 (rotor: JLA 8.1)) and pellets resuspended in approximatively 30 mL of lysis buffer (20 mM HEPES ...
-
bioRxiv - Molecular Biology 2024Quote: ... ADEV isolation was performed by ultracentrifugation at 100,000 × g for 14 h at 4 °C (swing bucket rotor on minimum acceleration/break setting, SW 32Ti Beckman Coulter, Brea, CA), and ADEVs were resuspended in 200μL PBS and stored at −20°C until used16,41 ...
-
bioRxiv - Cell Biology 2023Quote: ... Following centrifugation at 131,300 × g for 24 hr at 4 °C using a MLS-50 Swinging-Bucket rotor (Beckman Coulter, Brea, CA) to sediment protein complexes ...
-
bioRxiv - Cell Biology 2024Quote: ... All centrifugation steps were done at 4°C and the last two steps were performed using Optima XE-90 ultracentrifuge (Beckman Coulter, A94471) with rotor SW32Ti (Beckman Coulter ...
-
bioRxiv - Cell Biology 2024Quote: ... and cells were isolated by centrifugation at 500 g for 5 min at 4°C followed by being treated with a red blood lysis buffer (Beckman Coulter, USA). After washing with PBS ...
-
bioRxiv - Microbiology 2023Quote: ... The lysate was clarified by centrifugation at 5500 rpm for 20 min at 4°C (AllegraTM 21R Centrifuge, Beckman Coulter, CA, USA). The sample was then loaded into a HisTrap HP 5 mL column (Cytiva ...
-
bioRxiv - Neuroscience 2023Quote: ... then spun at 100,000 x g for 30 min at 4°C in an ultracentrifuge (Beckman OPTIMA TLX with TLA-100.3 rotor). The supernatant was saved and the pellet went through a series of similar extractions using High-Salt Triton Buffer (High-Salt Buffer ...
-
bioRxiv - Neuroscience 2023Quote: ... The supernatants were then combined and centrifuged at 17,000g for 10min at 4°C in a Beckman SW41-Ti rotor (Beckman Coulter, Brea, CA). The supernatant was saved as the cytosolic (CYT ...
-
bioRxiv - Cell Biology 2023Quote: ... cells were blocked in 2% human serum and PBS for 30 min at 4°C and stained with DC-SIGN (Beckman Coulter #A07407), CD80 (BioLegend #305214) ...
-
bioRxiv - Plant Biology 2023Quote: ... 700 μl of obtained extract was applied to a chilled sucrose density gradient and centrifuged at 4 °C for 2 hours 45 minutes at 151,000 ×g using the SW 41 Ti rotor (Beckman Culture Life Sciences). After centrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... Triton-X was added to the lysate to a final concentration of 0.1% and clarified by spinning at 15,000 RCF at 4°C for 45 minutes (Beckman Coulter JA-20 rotor). The supernatant was loaded onto a 5 mL HisTrap™ FF crude column (GE Healthcare ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysates were loaded onto the sucrose gradients and centrifuged at 40’000 rpm for 2 h at 4°C using the SW 41 Ti rotor (Beckman Coulter, Cat# 331362). Subsequently ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were centrifuged at 100,000 × g for 2 hr at 4 °C (Type 50.2 Ti Fixed angle ultracentrifuge rotor, Beckman Coulter, Brea, CA, USA). The supernatants were aspirated ...
-
bioRxiv - Immunology 2023Quote: ... Bacteria cultures were collected and discarded by centrifugation for 60 min at 4,000-8,000 x g and the supernatants were subjected to high-speed centrifugation at 11,9000 x g for 2-3 h at 4°C (Beckman Coulter Optima Ultracentrifuge). The pellets containing the OMVs were washed with PBS ...
-
bioRxiv - Biochemistry 2023Quote: ... by centrifugation at 80,000 × g for 30 min at 4°C using a TLS-55 rotor (Beckman Coulter Inc., Miami, FL, USA). Crista membranes were identified and removed based on fluorescence under a UV lamp ...
-
bioRxiv - Developmental Biology 2024Quote: ... for 30 min at 4°C in the dark followed by flow cytometry analysis on a CytoFlex 26 (Beckman Coulter, Indianapolis, IN) in PE-A and PerCP-A channels ...
-
bioRxiv - Bioengineering 2024Quote: ... The supernatant was then transferred into polycarbonate tubes and centrifuged at 20,000 ×g for 45 min at 4°C to pellet down m/lEVs using an Optima XE-90 ultracentrifuge fitted with a 50.2 Ti rotor (Beckman Coulter, Indianapolis, IN). Following that ...
-
bioRxiv - Neuroscience 2024Quote: ... The supernatant was segregated subsequent to centrifuging the brain tissue homogenate for 1 h at 100,000g and 4°C utilising an ultra-high-speed centrifuge (Beckman, Optima MAX-XP). The tissue residue was then reprocessed ...
-
bioRxiv - Biophysics 2024Quote: ... Samples were centrifuged at 24,000 rotations per minute using an S-28 rotor at 4◦C in an Optima XL-100K Ultracentrifuge (Beckman Coulter, Brea, CA). The supernatant was decanted ...
-
bioRxiv - Microbiology 2024Quote: ... Peptidoglycan was obtained by centrifuging for 13 min at 60,000 rpm at 20 °C (TLA100.3 Beckman rotor; OptimaTM Max ultracentrifuge Beckman, Beckman Coulter, California, USA). Pellets were washed 3-4 times by repeated cycles of centrifugation and resuspension in water ...
-
bioRxiv - Plant Biology 2024Quote: ... The cell lysate was centrifuged at about 16000 g for 10 min at 5 °C (Avanti J-265 XP, Beckman Coulter, USA). The starch pellet was recovered ...
-
bioRxiv - Molecular Biology 2024Quote: ... was loaded on top of the gradient and spun at 4°C for 18 hr at 30,000 rpm (Beckman, Rotor SW-41Ti). Samples were fractionated with absorbance optics (λ = 260 nm ...
-
bioRxiv - Biochemistry 2020Quote: ... The dialysed proteins were clarified by centrifugation in an Optima MAX-XP tabletop ultracentrifuge (Beckman Coulter Life Sciences) (90,720 x g ...
-
bioRxiv - Cancer Biology 2022Quote: ... proteins enriched by IgG-agarose beads were eluted and processed with Agencourt AMPure-XP magnetic beads (Beckman Coulter) as previously described [40] ...
-
bioRxiv - Microbiology 2020Quote: ... by ultra-centrifugation in a Beckman L7-65 ultracentrifuge at 25,000 rpm for two hours at 4°C using a Beckman SW28 rotor (Beckman Coulter, Brea, CA, USA). Supernatants were aspirated off and the pellets were re-suspended in PBS (pH 7.4) ...
-
bioRxiv - Microbiology 2020Quote: ... by centrifugation in a Beckman L7-65 ultracentrifuge at 25,000 rpm for 2h at 4°C using a Beckman SW28 rotor (Beckman Coulter, Brea, CA, USA). Supernatants were aspirated and the pellets were re-suspended in PBS (pH 7.4) ...
-
bioRxiv - Molecular Biology 2021Quote: ... The centrifugation is performed on a SW60Ti rotor at 40 000 g for 22 minutes at 4°C (Beckman Optima L-90K Ultracentrifuge). The mitochondrial fraction (400µL ...
-
bioRxiv - Molecular Biology 2020Quote: ... and plasma was separated by centrifugation (2,000 × g, 20 min, 4 °C) in a Microfuge 20R (cat. no. B30149, Beckman Coulter, Brea, CA, USA). Plasma was transferred to new 1.5 mL microcentrifuge tubes and further clarified by centrifugation (10,000 × g ...
-
bioRxiv - Biophysics 2022Quote: ... shortly sonified and centrifuged for 30 min at 100 000 g at 4°C (Centrifuge Beckman Coulter Optima XPN-80, Rotor type 70.1).) ...
-
bioRxiv - Biophysics 2022Quote: ... The samples were centrifuged for 30 min at 100 000 g at 4°C (Centrifuge Beckman Coulter Optima XPN-80, Rotor type 70.1). The supernatant ...
-
bioRxiv - Microbiology 2020Quote: ... CLP assembly reactions were incubated at 25°C for 30 min before loading onto 15-30% (wt/wt) sucrose gradients and spinning at 159,599 X g for 43 min at 4°C (Beckman Coulter TLS 55 rotor). Gradients were immediately fractionated and aliquots of each fraction were denatured by boiling in 1% SDS to ensure antibody access ...
-
bioRxiv - Biochemistry 2020Quote: ... Unbroken cells were pelleted by centrifugation at 18,000 RCF for 30 min at 4°C (Beckman centrifuge J-20-XP, Rotor JA16.250, DE). The supernatant was transferred to 45 TI rotor (Beckman ...
-
bioRxiv - Bioengineering 2020Quote: ... and the supernatant was centrifuged again at 26000 × g at 4 °C for 15 min using an Optima L-90K (Beckman Coulter, Brea, CA) ultracentrifuge with a 70-Ti fixed angle rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2021Quote: ... supernatants were collected and centrifuged with 150.000 x g (at rav) for 30 min at 4 °C using an Optima™ MAX-XP Ultracentrifuge (Beckman Coulter; TLA120.2 rotor). Pellets were resuspended in PBS and 4 µg of primary antibody were added for 30 min ...
-
bioRxiv - Genomics 2021Quote: ... The spores were washed twice with sterile ddH2O and pelleted at 3700g for 5 min at 4 °C in an Allegra X-12R centrifuge (Beckman, Brea, CA, USA). Spores were resuspended in sterile ddH2O and kept at 4°C until experiments.
-
bioRxiv - Biochemistry 2020Quote: ... The sample was centrifuged at 4°C for 1 hour and 40 minutes at 182,753 x g (38,000 rpm in a Beckman Coulter Type 42.2 Ti rotor).
-
bioRxiv - Neuroscience 2021Quote: ... The resulting lysates were centrifuged at 100,000Xg for 30-60 min at 4°C in an Optima TLX tabletop ultracentrifuge using a TLA-110 rotor (Beckman Coulter, Fullerton, CA). The clarified supernatants were removed and transferred into the new tubes ...
-
bioRxiv - Biochemistry 2020Quote: ... Unbroken cells were pelleted by centrifugation at 18,000 RCF for 30 min at 4°C (Beckman centrifuge J-20-XP, Rotor JA16.250, DE). The supernatant was transferred to 45 TI rotor (Beckman ...
-
bioRxiv - Biophysics 2021Quote: ... Cells were induced with IPTG and grown overnight at 37 °C and harvested by centrifugation in a Beckman Avanti J25 centrifuge with a JA-20 rotor at 5000 rpm (Beckman Coulter, Fullerton, CA). The cell pellet was resuspended in 10 mM Tris ...
-
bioRxiv - Biophysics 2020Quote: ... 150 μl of the sample was ultracentrifuged at 22°C and 205000 × g for 19 min (TLA 100.3, Beckman Coulter Inc., Fullerton, California). The experiments were performed in HEPES buffer ...
-
bioRxiv - Cancer Biology 2019Quote: ... A quantity of 10 μl of lentiviral particles was added to the appropriate wells and the cells and lentiviral particles containing plates were immediately centrifuged at 32°C for 90 minutes at 2500 rpm speed in a centrifuge (Beckman Allegra X-12R). After spinoculation ...