Labshake search
Citations for Beckman :
551 - 600 of 1639 citations for 1 4 Nitrophenyl cyclobutanecarbonitrile since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2022Quote: ... and ultracentrifuged at 25,000 g for 20 min 4°C (or 50,000 g for 30 min 4°C) in a Beckman TLA100.3 rotor (Optima™ TLX Ultracentrifuge, Beckman). The pellet was discarded ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was centrifuged at 4°C and 35,000 rpm for 2.5 h using an SW 40 Ti rotor (Beckman Coulter). Afterward ...
-
bioRxiv - Microbiology 2022Quote: ... which was spun in a ultracentrifuge at 30,000 x g for 2h at 4°C (SW 60 Ti rotor, Beckman) The pellet was resuspended in 20 μl of PBS for 1 h at 4 °C ...
-
bioRxiv - Molecular Biology 2023Quote: ... The gradients were centrifuged at 38,300 rpm for 2 hours and 45 min at 4 °C in a SW-40Ti (Beckman) rotor using an Optima XE-100 Ultracentrifuge (Beckman) ...
-
bioRxiv - Molecular Biology 2023Quote: ... The gradients were centrifuged at 38,300 rpm for 2 hours and 45 min at 4 °C in a SW-40Ti (Beckman) rotor using an Optima XE-100 Ultracentrifuge (Beckman) ...
-
bioRxiv - Neuroscience 2022Quote: ... supernatant was centrifuged for 3 h at 115,000 g and 4°C using the XPN-80 ultracentrifuge equipped with a Ti70 rotor (Beckman). EV pellets were resolved in 1 mL ice-cold PBS (Gibco ...
-
bioRxiv - Plant Biology 2023Quote: ... Extract was then centrifuged at 40 000 rpm for 2 hours at 4°C using the 50Ti rotor (Beckman). A protocole previsouly used in the laboratory and described in Maclot et al ...
-
bioRxiv - Microbiology 2022Quote: ... Glycoproteins in the supernatants were pelleted by centrifugation at 100,000×g at 4°C for 90 min using a TLA-55 rotor (Beckman). The resultant pellets ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was spun at 45,000 rpm (~200,000 x g) for 6 hours at 4 °C in a SW60Ti rotor (Beckman Coulter). Successive 0.4 mL fractions were collected by pipetting and their densities measured ...
-
Ribonuclease Inhibitor and Angiogenin collaboratively regulate cell-type-specific global translationbioRxiv - Biochemistry 2024Quote: ... and were centrifuged at 39,000 rpm for 2.45 hours at 4°C using Optima XPN-80 Ultracentrifuge (Beckman Coulter). Following centrifugation ...
-
bioRxiv - Molecular Biology 2024Quote: ... Virus was then purified by centrifugation through a 20% sucrose cushion at 25,000 rpm for 2.5 hours at 4 °C in a Sw32Ti rotor (Beckman Coulter). Virus pellets were resuspended in PBS and virus genomic RNA copy number was quantified by RTqPCR as described above ...
-
bioRxiv - Neuroscience 2024Quote: ... by centrifugation at 5,000 x g at 4°C for 30 minutes in a fixed angle rotor (Beckman Coulter). The qEV column washed with 1x PBS was then loaded with 500 µL of concentrated supernatant followed by 2.5 mL PBS to collect 3 mL void volume ...
-
bioRxiv - Neuroscience 2024Quote: ... and PBS was added to reach a 4.5 mL tube filling and centrifuged at 120,000xg for 100 min at 4°C in the L-60 Optima Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Cell Biology 2024Quote: ... The supernatant was then subjected to ultracentrifugation at 100,000 x g for 2 h at 4 °C to sediment small EVs (Optima L-80K ultracentrifuge, Beckman Coulter ...
-
bioRxiv - Cell Biology 2024Quote: ... samples were ultracentrifuged at 160,000 xg for 2 h at 4 °C in ultracentrifuge tubes (Beckman Coulter Cat #328874). The resulting pellet contained the insoluble AMB-1 cell fraction and the supernatant contained the soluble fraction ...
-
bioRxiv - Cancer Biology 2024Quote: ... 100 μg/mL cycloheximide) for 2 h at 40,000 g at 4 °C using an SW41 rotor (Beckman Coulter). Gradients were fractionated using Teledyne Isco Tris Peristaltic Pump and fractions were collected and pooled according to the UV trace ...
-
bioRxiv - Biophysics 2024Quote: ... Each seed mix was clarified using an ultra-centrifuge (Beckman Optima MAX-XP, 90,000 RPM, 4°C, 5 min) then snap-frozen in small aliquots and stored at -80°C ...
-
bioRxiv - Biochemistry 2023Quote: ... lysates were centrifuged at 60,000 x g (4 °C) for 45 min (Beckman Avanti JXN-26 (rotor: JA 25.5)) and immediately supplemented with 10 mL pre-washed Ni2+-NTA agarose (QIAGEN ...
-
bioRxiv - Neuroscience 2023Quote: ... DTT-treated EVs were pelleted at 100,000 x g for 70 min at 4°C in a TLA100 rotor (Beckman). The supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The prepared gradients were centrifuged at 200,000 x g for 16 h at 4°C in an SW41Ti rotor (Beckman), with no braking during deceleration ...
-
bioRxiv - Neuroscience 2023Quote: ... The pellet was resuspended in 4.5 volumes of ice-cold extraction buffer and re- centrifuged at 11,300 RPM for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and combined with the first supernatant ...
-
bioRxiv - Neuroscience 2023Quote: ... The tube was topped up to 23 mL with PBS and centrifuged at 59,300 RPM for 30 min at 4°C using a Ti70 rotor (Beckman). The floating lipid layer and supernatant were discarded and the pellet was transferred to a 2 mL tube in 50 μL PBS per g initial grey matter ...
-
bioRxiv - Neuroscience 2023Quote: ... The homogenate was centrifuged at 11,300 revolutions per minute (RPM) for 10 min at 4°C using a Ti45 rotor (Beckman). The supernatant was filtered through a 70 μm pore size cell-strainer and retained on ice ...
-
bioRxiv - Neuroscience 2023Quote: ... The supernatant was transferred to fresh tubes and centrifuged at 100,000 x g for 70 min at 4°C using a Ti45 rotor (Beckman). The 100,000 x g pellets were resuspended in 1 mL ice-cold PBS and brought to 60 mL using PBS ...
-
bioRxiv - Microbiology 2022Quote: ... Cell debris was removed by centrifugation at 14,800 rpm for 20 minutes 4 °C in F241.5P rotor using 149 Microfuge 22R centrifuge (Beckman Coulter). The supernatant was combined with 100 µL of ANTI-FLAG M2 Affinity Gel (Sigma ...
-
bioRxiv - Neuroscience 2023Quote: ... The lysate was centrifuged at 40,000 rpm for 50 min at 4°C (45 Ti fixed-angle rotor, Beckman) and the transporter-Fab complex was isolated by affinity chromatography using Strep-Tactin resin ...
-
bioRxiv - Biochemistry 2023Quote: ... Cells were lysed by extrusion using a Teflon Dounce homogenizer and clarified by centrifugation at 30000g for 40 minutes at 4°C using a Ja 25.50 rotor (Beckman). The clarified lysate was incubated with 2 ml of pre-equilibrated Protein C affinity resin (Roche ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were ultracentrifuged at 100,000 g for 30 minutes at 4°C in a Optima XPN-100 ultracentrifuge (Beckman). Supernatants were kept aside as “Supernatant” fraction ...
-
bioRxiv - Microbiology 2023Quote: ... All centrifugation steps were performed at 4 °C in an Avanti J-E high-speed fixed-angle centrifuge (Beckman Coulter Life Sciences ...
-
bioRxiv - Microbiology 2023Quote: ... The tube was centrifuged for 3 hours at 150’000 x g (4°C) using a SW 32.1 Ti swinging bucket (369651, Beckman Coulter). Finally ...
-
bioRxiv - Plant Biology 2023Quote: ... Approximately 250 µl of crude EV sample resuspended in 20 mM Tris-HCl pH 6.0 was slowly dispensed on top of the column and centrifuged at 100,000 x g for 17 h at 4 ⁰C (SW 41 Ti rotor, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... 20µM ATP and 1 mM DTT and subsequently sedimented (100,000 x g, 15 min, 4°C, TLA-100 rotor) in an Ultima MAX-XP ultracentrifuge (Beckman). For competition assays ...
-
bioRxiv - Cancer Biology 2023Quote: ... and centrifuged (33.500 rpm/4°C/3h, brake off) in a Optima XPN-80 ultracentrifuge (Beckman Coulter, Krefeld, Germany). Sucrose gradients were eluted into a BR-188 density gradient fractionation system (Brandel Inc ...
-
bioRxiv - Biophysics 2023Quote: ... placed in an An50Ti rotor and centrifugated 50,000 rpm at 4 °C using an Optima XL-I analytical ultracentrifuge (Beckman). The data were analysed in SEDFIT-16.1c 53 using a c(s ...
-
bioRxiv - Molecular Biology 2023Quote: ... 1-1.5 μg of total protein was loaded onto a 10% to 50% sucrose gradient and centrifuged at 36,000 rpm for 2 hours at 4°C using an SW41 rotor (Beckman). Polysome profiles were visualized ...
-
bioRxiv - Biochemistry 2023Quote: ... at 40% on a Branson Digital Sonifier and clarified by centrifugation for 30 minutes at 27,216 × g at 4°C in an SS-34 rotor (Avanti J-25 centrifuge, Beckman).
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified by centrifugation (183,960 x g, 88 min, 4°C) in a Type 70Ti rotor (Beckman). The supernatant was mixed with 2 mL of IgG Sepharose 6 Fast Flow beads (Cytiva ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was clarified via centrifugation (66,000 x g, 30 min, 4°C) in a Type 70 Ti rotor (Beckman). The supernatant was mixed with 1.5 mL of anti-FLAG M2 affinity gel (Sigma-Aldrich ...
-
bioRxiv - Immunology 2022Quote: ... then samples were centrifuged at 2,700 RPM for 10 minutes at 4°C in a tabletop centrifuge (Beckman Coulter). The supernatant (serum ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and the pellet was resuspended in 25 ∝l lysis buffer ...
-
bioRxiv - Cell Biology 2023Quote: ... Gradients were spun at 45,000 RPM for 16 hours at 4°C in SW55Ti rotor using an ultracentrifuge (Beckman). After centrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysate was then clarified (using a JA 25.50 Beckman rotor at 40000x g for 30 min, 4°C) and the soluble fraction was incubated with 2 ml of Glutathione Sepharose 4B resin for 2h at 4°C under constant agitation ...
-
bioRxiv - Cancer Biology 2023Quote: ... 100 μg/mL cycloheximide if reaction contained cycloheximide) for 3.5 hrs at 240,000 g at 4 °C using a SW41 rotor (Beckman Coulter). Gradients were fractionated using Teledyne Isco Tris Peristaltic Pump and fractions were collected and pooled according to the UV trace ...
-
bioRxiv - Biochemistry 2023Quote: ... Density gradient centrifugation was done at 50,000 rpm for two hours at 4 °C using a 70.1 Ti rotor (Beckman Coulter). Post centrifugation ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Genomics 2023Quote: ... followed by centrifugation at 31,900 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). Next ...
-
bioRxiv - Biophysics 2023Quote: ... and the resulting lysate was cleared by centrifugation at 279,288 × g for 10 minutes at 4°C using a tabletop centrifuge unit from Beckman Coulter ...
-
bioRxiv - Plant Biology 2023Quote: ... The supernatant from this step was decanted into the new tubes and centrifuged at 39,800 x g for 2 h at 4 ⁰C (JA-17 rotor, Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... After cell debris and undisrupted cells were removed by centrifugation (45,000 rpm, 30 min, 4°C, 70Ti rotor; Beckman), supernatant was applied to an open column with Ni-IMAC resin (BIO-RAD) ...