Labshake search
Citations for Beckman :
451 - 500 of 1639 citations for 1 4 Nitrophenyl cyclobutanecarbonitrile since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2023Quote: ... concentrated by ultracentrifugation at 22.000 rpm for 2.5 h at 4°C (Optima™ XPN-80 – Beckman Coulter), redissolved in 100 µL of DMEM and stored in small aliquots at −80 °C ...
-
bioRxiv - Genomics 2023Quote: ... Extracts were then centrifuged at 148,000 g for 2.5 hours at 4°C using the SW 28 Ti rotor (Beckman). Resulting pellet was resuspended overnight at 4°C in 1.5 ml of HBSS ...
-
bioRxiv - Bioengineering 2023Quote: ... at 4°C using an Optima Max Ultracentrifuge and a TLA-55 rotor (Beckman Coulter, Brea, CA, USA). The pellet from this supernatant (i.e. ...
-
bioRxiv - Cell Biology 2023Quote: ... Mitochondrial membranes were pelleted at 72000 xg for 30 min at 4°C using an optimaTM ultracentrifuge (Beckman) with Beckman rotor (TLA 120) ...
-
bioRxiv - Biochemistry 2023Quote: ... samples were centrifuged at 80,000 rpm for 20 min at 4°C in a TLA-100.1 rotor (Beckman). The supernatant was carefully removed ...
-
bioRxiv - Cancer Biology 2023Quote: ... Following centrifugation at 50,000 rpm for 16 hours at 4 °C in SW 55 Ti Rotor (Beckman Coulter), fractions (100 μL each ...
-
bioRxiv - Cell Biology 2023Quote: ... The fraction containing TpPyShell was further concentrated by centrifugation (4000 g, 15 min, 4°C, SX4400 rotor; Beckman) with Amicon Ultra (M.W.4000 ...
-
bioRxiv - Cell Biology 2023Quote: ... Cells were harvested by two rounds of centrifugation (6,000 rpm, 10 min, 4°C, JLA-9.1000 rotor; Beckman), resuspended in Buffer A containing 50 mM Tris-HCl pH8.0 ...
-
bioRxiv - Cancer Biology 2023Quote: ... the high-speed centrifugation at 167,000g for 4 hours in an SW32 Ti swinging-bucket rotor (Beckman Coulter) was used to separate and further wash the EV from the concentrate collected in the previous step ...
-
Faa1 membrane binding drives positive feedback in autophagosome biogenesis via fatty acid activationbioRxiv - Biochemistry 2023Quote: ... Lysates were cleared by centrifugation (20,000 rpm for 45 min at 4°C in a Beckman SW45Ti rotor). The supernatant was incubated with IgG Sepharose beads (GE Healthcare ...
-
bioRxiv - Cell Biology 2023Quote: ... samples were centrifuged at 80,000 rpm for 20 min at 4°C in a TLA-100.1 rotor (Beckman). The supernatant was carefully removed ...
-
bioRxiv - Biophysics 2024Quote: ... Lysates were then clarified by centrifugation (100,000 xg, 60 min, 4 °C, JA 30.50 rotor, Avanti JXN-26 centrifuge (Beckman)) before filtering the supernatant through 0.45 μm syringe filters ...
-
bioRxiv - Cell Biology 2024Quote: ... Following an 18-hr centrifugation at 4°C (44,000 rpm, SW55 rotor, Beckman Optima LE-80 K Ultracentrifuge), 420-μl fractions (1-11 ...
-
bioRxiv - Cell Biology 2024Quote: ... The post-nuclear supernatants were centrifuged at 60,000 rpm for 60 min at 4°C with a TLA 120.2 rotor (Beckman) to collect ER-mitochondria-enriched fractions ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were collected by centrifugation (8,000 rpm, 10 minutes at 4°C, JLA-10.500 rotor (Beckman Coulter)) ...
-
bioRxiv - Microbiology 2024Quote: ... cultures were harvested by centrifugation for 30 minutes at 5,000 rpm and 4 °C in an Avanti JXN-26 Floor Centrifuge using the JXN 12.500 rotor (Beckman). The resulting pellets were resuspended in 40 mL Lysis buffer (20 mM HEPES pH 7.5 ...
-
bioRxiv - Neuroscience 2024Quote: ... Ultracentrifugation was done at 134,000xg for 4h at 4°C using an SW 41 Ti rotor (Beckman Coulter) in an Optima XE-90 ultracentrifuge (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2024Quote: ... microsomes from the IVT reactions were first recovered by centrifugation at 4°C in the TLA55 rotor (Beckman) for 20 min at 55,000 rpm ...
-
bioRxiv - Immunology 2024Quote: ... and 20% OptiPrep density gradient at 100,000 × g overnight and at 4 °C (SW 40 Ti, Beckman Coulter). The following day ...
-
bioRxiv - Genomics 2024Quote: ... by centrifuging the chip facing downwards at 3,220 g for 5 min at 4 °C and purified with 1.5 × Ampure XP beads (Beckman), followed by DNA QC and trace checking.
-
bioRxiv - Cancer Biology 2024Quote: ... followed by ultracentrifugation at 100,000 g for 90 min at 4°C (45Ti or TLA110 rotors, Beckman Coulter). The pellet containing EVs was washed in cold 1x PBS (Gibco ...
-
bioRxiv - Biochemistry 2024Quote: ... and subjected to centrifugation at 35,000 rpm for 2.5 hr at 4 °C using a SW41Ti rotor (Beckman). The polysome profile in sucrose gradients was resolved using a Brandel gradient fractionator ...
-
bioRxiv - Biophysics 2024Quote: ... and the lysate was cleared by ultracentrifugation for 30 minutes at 4°C (Ti45 rotor, 37,000rpm, Beckman Coulter). The proteins were purified by affinity chromatography using an ÄKTA Start (GE Healthcare ÄKTA Start) ...
-
bioRxiv - Microbiology 2021Quote: ... PE) and HIV-1 Gag core antigen (FH190-1-1, Beckman Coulter; PE, FITC). All samples were acquired on either an BD Fortessa X20 or LSR II using BD FACSDiva software and analyzed using FlowJo v10 (Tree Star) ...
-
bioRxiv - Immunology 2024Quote: ... PD-1 (PE-Cy5.5, 1/320, Beckman Coulter). Staining was performed in 1X PBS with 5% FBS and incubated in the dark for 30 minutes ...
-
bioRxiv - Immunology 2024Quote: ... PD-1 (PE-Cy5.5, 1/320, Beckman Coulter). Staining was performed in 1X PBS with 5% FBS and incubated in the dark for 30 minutes ...
-
bioRxiv - Biophysics 2021Quote: ... Cell debris was removed by centrifugation (12,000x□g for 15□min at 4°C) and membranes were then pelleted at 45,000 rpm in a Type 45 Ti rotor (Beckman) for 3□h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (40 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was filtered (0.45 μm ...
-
bioRxiv - Biochemistry 2020Quote: ... Lysates were cleared by ultracentrifugation (25 000 rpm for 30 min at 4°C in a Beckman Ti45 rotor). Supernatant was incubated with GSH beads (GE Healthcare ...
-
bioRxiv - Biochemistry 2021Quote: ... after which the lysate was clarified by centrifugation at 30,000 x g for 60 min at 4 °C in a JA 25.50 rotor in an Avanti J-E centrifuge (Beckman). Nucleic acids in the clarified lysate were precipitated by slowly adding polyethyleneimine with constant stirring in an ice bath to a final concentration of 0.4% ...
-
bioRxiv - Microbiology 2020Quote: ... of 1.5 mL and then centrifuged 45 min at 100,000g at 4°C in a TLA-100 ultracentrifuge (Beckman Coulter). The supernatant contains the soluble fraction and the pellet corresponds to the total membranes ...
-
bioRxiv - Cell Biology 2020Quote: ... 0.5 mM DTT, 100 μg/ml cycloheximide) and centrifuged (160,000 g, 120 min, 4°C) in an SW41Ti rotor (Beckman). After centrifugation the sediment in the tube went through a UV detector at the wavelength of 254nm and simultaneously the required fractions (>=5 ribosomes ...
-
bioRxiv - Evolutionary Biology 2022Quote: ... The filtered supernatant from one 400 ml batch was then pelleted (1.5 hour at 24 000 rpm at 4 °C with Beckman Coulter L-90K centrifuge and 45 Ti rotor ...
-
bioRxiv - Biophysics 2022Quote: ... The sample was loaded on top of the glycerol gradient and centrifuged at 4°C for 18 h at a speed of 35,000 rpm in SW-41Ti rotor (Beckman). Fractions of 500 μL were collected ...
-
bioRxiv - Microbiology 2020Quote: ... Phage were pelleted by centrifugation at 82705 xg (25,000 rpm) for 4 hours using an SW28Ti rotor (Beckman Coulter). Phage pellets were gently resuspended overnight in 1 mL of phage buffer at 4°C with shaking ...
-
bioRxiv - Genomics 2021Quote: ... we filtered the virus-laden media through a 0.22μm PES filter and then concentrated viral particles by ultracentrifugation at 24,000 rpm for 1.5 hours (4°C) with an SW-32Ti swinging bucket rotor (Beckman Coulter). We resuspended the viral pellet in iPS-Brew at 1/200th the original supernatant volume and then stored 50-100 μl aliquots at −80°C.
-
bioRxiv - Cell Biology 2020Quote: ... Lysates were loaded on the top of the gradient and centrifuged at 260,000 × g and 4 °C for 2 h using SW 41 rotor (Beckman). Collection of polysomal fractions were done using Piston Gradient Fractionator (BioComp) ...
-
bioRxiv - Immunology 2021Quote: Cells were analyzed using 4-to 6-color direct immunofluorescence staining on a Cytoflex LX or S (Beckman Coulter) flow cytometer ...
-
bioRxiv - Microbiology 2021Quote: ... 200mM NaCl was used to top up the 13mL polyethylene tube and the solutions were spun at 27,000×g for 18 hours at 4°C using SW45 Ti rotor (Beckman). 1mL of top fraction ...
-
bioRxiv - Biochemistry 2020Quote: ... and were centrifuged for 4 min at 46 000 rpm at 4°C in a Optima MAX-XP Ultracentrifuge with a TLA 100.3 rotor (Beckman). The pellet was suspended in (20 µl ...
-
bioRxiv - Cancer Biology 2021Quote: ... Libraries were further amplified 4–6 PCR cycles as described [43] and purified using AMPure XP beads (Beckman Coulter). ATAC-seq libraries were subsequently sequenced 2 x 75 bp on an Illumina NextSeq500.
-
bioRxiv - Biophysics 2021Quote: ... sucrose density gradients and centrifuged at 24,000 × rpm (102,170 × g) for 18 h at 4°C (Sw40Ti rotor, Beckman Coulter). The fractions of the sucrose gradient were applied to SDS-PAGE ...
-
bioRxiv - Biophysics 2021Quote: ... The VP2 capsid protein fractions were pooled and subjected to centrifugation at 28,000 rpm (139,065 × g) for 3 h at 4°C (Sw40Ti rotor, Beckman Coulter). The pellet was resuspended in 50 mM Tris (pH 7.4) ...
-
bioRxiv - Biochemistry 2020Quote: ... mixed for 10 minutes at 4°C and centrifuged at 25,000 rpm for 45 minutes (Beckman Ti-45 rotor). The supernatant was warmed to 37°C for few minutes until it turned cloudy following which it was centrifuged at 11,000 rpm at room temperature for 10 minutes (Beckman JA-20 rotor ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 97,658 x g for 3 h at 4°C using a SW41Ti rotor (Beckman & Coulter, # 331362). The polysome fractions were collected using the Foxy R1 Fraction Collector and immediately snap frozen with liquid nitrogen and stored at −80 °C ...
-
bioRxiv - Cell Biology 2021Quote: ... and centrifuged at 40,000 rpm (∼128,000 × g) for 3 h at 4°C using an MLS-5 rotor (Beckman Coulter). Aldolase (158 kDa ...
-
Human Sex Matters: Y-linked lysine demethylase 5D drives accelerated male osteogenic differentiationbioRxiv - Cell Biology 2021Quote: ... Virus was transferred into conical tubes and spin at 20000rpm for 2 hours at 4°C in (Beckman TST2838) swinging bucket rotor ...
-
bioRxiv - Biochemistry 2021Quote: ... 2 mM DTT) by being centrifuged at 73000 rpm for 45 minutes at 4°C (Beckman Coulter TL120.2 rotor). The mitoribosomal pellet was subsequently resuspended in ribosome resuspension buffer (25 mM HEPES-KOH pH = 7.5 ...
-
bioRxiv - Biochemistry 2020Quote: ... Cell debris was removed by centrifugation at 14,800 rpm for 20 minutes 4 °C in F241.5P rotor using 149 Microfuge 22R centrifuge (Beckman Coulter). The supernatant was combined with 100 μL of ANTI-FLAG M2 Affinity Gel (Sigma ...
-
bioRxiv - Biochemistry 2020Quote: ... Cells were collected by centrifugation (8 000 rpm for 10 min at 4 °C, JLA-16.25 Beckman Coulter rotor), pellets frozen in liquid nitrogen and stored at −80°C ...