Labshake search
Citations for Bio-Rad :
4051 - 4100 of 9407 citations for Mouse Interleukin 1 Family Member 10 IL1F10 ELISA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2019Quote: ... Gels were then incubated in distilled water for 10 minutes and visualized by UV transillumination (Bio-Rad ChemiDoc Imaging System). The results were quantified by ImageJ software (Schneider et al. ...
-
bioRxiv - Immunology 2021Quote: ... Excess biotin was removed via size exclusion chromatography using an Enrich SEC 650 10 x 300 mm column (Bio-Rad). The S-2P probes were made at a ratio of 2 moles of trimer to 1 mole streptavidin ...
-
bioRxiv - Genetics 2019Quote: ... Protein samples were denatured at 95°C for 5 min in appropriate loading buffer and loaded into precast SDS-PAGE gels (10% polyacrylamide; Biorad). Gels were run at 40 mA for 45 min in 1x running buffer (Fisher) ...
-
bioRxiv - Molecular Biology 2019Quote: ... containing 2μL of 20X reducing buffer at 95°C for 10 min and separated by SDS-PAGE short migration on 12% SDS-PAGE (Criterion XT Precast gels–BioRad). After a short migration ...
-
bioRxiv - Plant Biology 2019Quote: ... 5 μl of 10-fold diluted cDNAs was used for qRT-PCRs using a CFX96 real-time PCR machine (BioRad) with a SYBR solution (Eurogentec ...
-
bioRxiv - Cancer Biology 2019Quote: ... The denatured samples were loaded onto a 10% Tris-Glycine SDS-polyacrylamide gel (Bio-Rad Cat# 456-1024, Hercules, CA). Protein molecular weight marker (Bio-RAD Cat# 161-0374 ...
-
bioRxiv - Genetics 2020Quote: ... Animals were electroporated at 300 V for 10 ms (unless otherwise specified) by square-wave single pulse using a Bio-Rad Gene Pulser (BioRad). Immediately after the electroporation ...
-
bioRxiv - Neuroscience 2021Quote: ... 20 to 50 μg protein from each sample were resolved in 10% SDS-polyacrylamide gel and transferred onto 0.2 μm nitrocellulose membranes (Bio-Rad). 5% nonfat dry milk in Tris-buffered saline containing 0.1% Tween 20 was use to block the membranes ...
-
bioRxiv - Neuroscience 2021Quote: ... 20 μg of total protein/sample were loaded in each well of a 10% PAGE gel and transferred onto a nitrocellulose membrane (#1704158, BioRad) in a Trans-Blot Turbo system (Bio-Rad) ...
-
bioRxiv - Cell Biology 2020Quote: ... The lysate was cleared by centrifugation at 10,000xg for 10 minutes at 4°C and then boiled in 2x Laemmli Sample Buffer (Bio-Rad). After SDS-PAGE ...
-
bioRxiv - Biochemistry 2021Quote: ... Proteins were separated in 10% SDS-polyacrylamide gels and electrotransferred to PVDF membranes using a semi-dry system (Bio-Rad). Biotin incorporation was assessed by incubating blots with streptavidin-HRP (1:1000 v/v ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples (10 µg protein) were denatured at 95°C for 5 min in 4x Laemmli Sample Buffer (1610747, Bio-Rad) or Novex NuPAGE LDS Sample Buffer (NP0007 ...
-
bioRxiv - Biochemistry 2021Quote: ... Protein samples were separated on 10 or 12% SDS-PAGE gels and transferred to nitrocellulose membranes (Bio-Rad, Hercules, CA) using a Trans-Blot SD Semi-Dry Transfer Cell (Bio-Rad) ...
-
bioRxiv - Cancer Biology 2020Quote: ... Around 40 μg of whole-cell lysate was resolved in 10% SDS-PAGE gel (Mini protein Tetra cell Bio-Rad) and blotted to nitrocellulose membrane (Bio-Rad ...
-
bioRxiv - Developmental Biology 2021Quote: ... boiled at 99 °C for 10 min and supernatants were loaded on 4–12% Criterion XT Bis–Tris precast gel (Biorad). The gel was fixed with 40% methanol and 10% acetic acid and then stained for 1 hour using colloidal coomassie dye G-250 (Gel Code Blue Stain ...
-
bioRxiv - Immunology 2020Quote: ... and 30 μg of total protein were separated by 10% SDS-PAGE and transferred to a nitrocellulose membrane (Bio-Rad). Correct protein loading was confirmed by Ponceau staining ...
-
bioRxiv - Microbiology 2021Quote: ... for 10 minutes at 37 °C and analyzed with Bio-Rad S3 Cell Sorter (Bio-Rad Laboratories Inc., California, USA) and ProSort™ Software using green fluorescence as a trigger.
-
bioRxiv - Immunology 2020Quote: ... Immunoblotting was performed according to standard protocols with initial blocking in PBS with 10% w/v clotting grade blocker (BioRad) or 3% w/v BSA (Sigma-Aldrich ...
-
bioRxiv - Microbiology 2021Quote: ... Cells were centrifuged at 3000g and the pellet was washed with ice-cold water twice before resuspending in 10% glycerol solution for electroporation using a GenePulser XCell (BioRad) electroporator with the pre-set bacterial protocol for E ...
-
bioRxiv - Microbiology 2020Quote: ... Samples were boiled with SDS sample buffer and resolved on a 10% Mini-PROTEAN TGX Precast Protein Gel (BIO-RAD). Proteins were transferred to nitrocellulose membranes ...
-
bioRxiv - Genomics 2021Quote: ... Antibodies were affinity purified using either the peptides linked to SulfoLink beads (Pierce) or the Ascaris proteins (without GST) linked to a mix of Affigel-10/15 (BioRad).
-
bioRxiv - Cell Biology 2021Quote: ... Samples were centrifuged at 13 000 g for 10 min and resolved using SDS-PAGE gels and transferred onto Polyvinylidene difluoride membranes (PVDF; BioRad). The membranes were blocked with 5% milk in TBST and probed with the indicated primary antibodies in 5% BSA/TBST and a 1:10000 dilution of anti-rabbit or anti-mouse horseradish peroxidase-conjugated secondary antibodies in 5% BSA/TBST ...
-
bioRxiv - Genetics 2020Quote: ... 10 µg of protein were loaded in each well of a gel (Bio-Rad # 567-1094, 567-1095, 456-1036). Blots were blocked in 5% milk/TBST for two hours at room temperature (RT) ...
-
bioRxiv - Molecular Biology 2020Quote: Proteins were separated by SDS-PAGE (10-12% acrylamide) and transferred onto a PVDF membrane using the semidry TransBlot system (BioRad). The membrane was blocked with either 5% skimmed milk or 5% BSA (Bovine Serum Albumin ...
-
bioRxiv - Neuroscience 2021Quote: ... and equal protein amounts were boiled at 95°C for 10 minutes prior to being run on a gel (BioRad) at 120V ...
-
bioRxiv - Microbiology 2021Quote: 2 μl of serially diluted cDNA samples was mixed with 10 μl of 2× ddPCR supermix for probes (Bio-Rad), 1 μl of 20× WT primers/probe ...
-
bioRxiv - Molecular Biology 2022Quote: ... Sample was injected and run on ENrich SEC 650 10 x 300 24 mL size exclusion column (Bio-Rad 7801650) using Tn5 SEC Buffer ...
-
bioRxiv - Cell Biology 2022Quote: ... Eluted samples and whole cell lysate controls were loaded and run on a 10% Mini-PROTEAN TGX protein gel (Biorad), visualized with AcquaStain (Bulldog Bio) ...
-
bioRxiv - Biochemistry 2022Quote: ... Samples were boiled with SDS-PAGE sample loading buffer (6X SDS) and 30 ug of protein was loaded to each well of a 10% Tris-glycine SDS-PAGE gel (BioRad). Proteins were transferred to a PVDF membrane (Millipore) ...
-
Reducing mitochondrial ribosomal gene expression does not alter metabolic health or lifespan in micebioRxiv - Cell Biology 2022Quote: ... The solution was centrifuged 16,000g for 10 minutes at 4°C and the supernatant containing the mitochondrial or cell lysate proteins quantified (Bio-Rad DC Protein Assay ...
-
bioRxiv - Plant Biology 2022Quote: ... Then 2 μl of 10 times diluted cDNA was used for CFX96 Touch Real-Time PCR Detection System (Bio-Rad) for Syber green based quantitative PCR analysis ...
-
bioRxiv - Synthetic Biology 2022Quote: ... Ribosome fractions were resolved by SDS-polyacrylamide gel electrophoresis on 10% Mini-PROTEAN TGX™ Precast Protein Gels (Bio-Rad). Prior to loading ...
-
bioRxiv - Microbiology 2022Quote: ... used as a load control) were mixed with TBE-Urea sample buffer (Novex) and run in a 10% TBE-Urea Polyacrylamide gel (Biorad) at 180 V for 1 hour ...
-
bioRxiv - Plant Biology 2022Quote: ... approximately 60-70 μg of protein was loaded onto 7 cm pH 3-10 NL and pH 4-7 IPG strips (BioRad) and subjected to first-dimensional electrophoresis with increasing voltages from 50V to 2000V ...
-
bioRxiv - Microbiology 2024Quote: Protein samples were incubated at 95°C for 10 minutes before being resolved on TGX Stain-free gels (Bio-Rad). The proteins were transferred onto 0.2 μm nitrocellulose membranes using Trans-Blot Turbo Transfer (Bio-Rad) ...
-
bioRxiv - Synthetic Biology 2022Quote: ... the hybrid RNA/DNA origami was run on 1.5% agarose gel in TAE buffer (75 mL were poured into a 15 cm x 10 cm gel tray, Biorad) and analysed by in-gel imaging using the specific dye DFHBI-1T as described above with few modifications due to the different gel composition (agarose instead of polyacrylamide ...
-
bioRxiv - Neuroscience 2022Quote: ... Samples were resolved by SDSPAGE using 10% acrylamide/bis-acrylamide gels and transferred to 0.2 μm pore size nitrocellulose (Bio-Rad). Membranes were blocked with Odyssey blocking buffer (LI-COR ...
-
bioRxiv - Molecular Biology 2022Quote: ... The reaction mixtures were held at 10°C until the PCR tubes were removed from the thermocycler (C1000 Touch, BioRad). After ...
-
bioRxiv - Physiology 2022Quote: ... lysates were centrifuged at top speed for 10 min and supernatant were collected and proteins were quantified using Protein DC assay (BioRad). Proteins were running and separated on 4%-12% Bis-Tris Pre-cast Gel (Life Technologies ...
-
bioRxiv - Microbiology 2022Quote: ... Cell equivalents of ~1.5×106 cells per lane were separated by 10% SDS-PAGE along with the Precision Plus Protein Kaleidoscope standard (BioRad). The fractionated proteins were transferred to a PVDF membrane ...
-
bioRxiv - Cell Biology 2022Quote: ... in phosphate-buffered saline (PBS) for 10 min and permeabilized with 0.15% (v/v) Triton X-100 (#1610407, Bio-Rad) in PBS for 2 min ...
-
bioRxiv - Neuroscience 2024Quote: ... Slices were then incubated eMAP hydrogel monomer solution (30% acrylamide [A9099, MilliporeSigma, St. Louis, MO, USA], 10% sodium acrylate [408220, MilliporeSigma], 0.1% bis-acrylamide [161-0142, Bio-Rad Laboratories ...
-
bioRxiv - Bioengineering 2024Quote: ... in 20 µL reaction mixtures containing 10 µL of SsoAdvanced™ Universal SYBR Green Supermix (Bio-Rad, Hercules, CA, USA), 300 nM of each primer ...
-
bioRxiv - Microbiology 2024Quote: ... Blots were washed 4 × 10 min with TBST and then visualized by enhanced chemiluminescence using the Clarity Max (Bio-Rad) substrate.
-
bioRxiv - Microbiology 2024Quote: ... The membrane was washed 3x with 10 mL of TBS-T and developed with Clarity Max ECL substrate (Bio-Rad). Western blot images were taken with an Azure Biosystems C400 imager.
-
bioRxiv - Microbiology 2024Quote: ... the samples were boiled at 95°C for 10 minutes and resolved on a TGX stain-free gel (Bio-Rad) for SDS-PAGE analysis ...
-
bioRxiv - Molecular Biology 2024Quote: ... and heat denatured at 95°C for 10 min before loading onto a 4-15% Tris-glycine gel (Bio-Rad) and electrophoresed at 125 V ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were denatured for 10 minutes at 70°C and proteins were separated (55min, 200V) on a Midi 4-12% Bis-Tris gel (BioRad) in 1x MOPS buffer (BioRad ...
-
bioRxiv - Neuroscience 2024Quote: Samples (8–25 μg protein extract) were run on 8–10% acrylamide gel at 100 Volt in Running Buffer (1X Tris–Glycine-SDS, Biorad) together with Precision Plus Protein Dual Color Standards (Biorad) ...
-
bioRxiv - Neuroscience 2024Quote: ... The lysates were then chilled briefly on ice and then loaded onto a Stain-Free mini-protean 10 well pre-cast gel (BioRad) and mini-protean tank (BioRad ...