Labshake search
Citations for Bio-Rad :
1451 - 1500 of 3415 citations for C Type Lectin Domain Family 2 Member B CLEC2B Antibody since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2019Quote: ... and heated at 90°C for 5 min before being run on a stain free gel and imaged by GelDoc imager (BIO-RAD).
-
bioRxiv - Microbiology 2019Quote: ... Samples were boiled for 5 minutes at 95°C before separation on a gradient 4-20% SDS-PAGE gel (Bio-Rad). Samples were then transferred to nitrocellulose membrane using standard methods for semi-dry transfer (Bio-Rad) ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... to 10 μL RNA and incubating at 65°C for 5 min on a C1000 Touch Thermal Cycler (Bio-Rad, USA) followed by chilling on ice ...
-
bioRxiv - Biochemistry 2022Quote: ... and heated to 100 °C for 5 min and resolved on 4-20% (w/v) gradient SDS-PAGE gels (Bio-Rad) with Tris-glycine buffer ...
-
bioRxiv - Neuroscience 2021Quote: ... was then added and the solution was mixed at 4°C for 10 minutes before addition of 100 mg of Biobeads SM2 (Bio-Rad). Biobeads were washed into methanol ...
-
bioRxiv - Molecular Biology 2021Quote: ... Cleavage-related change in fluorescence signal of the probe was measured every 30 s for 60 min under incubation at 37°C using a Real-time PCR system (Bio-Rad Laboratories ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were heated to 50°C for 1-10 min before addition of 40 μl molten CleanCut agarose (Bio-Rad 1703594), vortexing vigorously for 5 s before pipetting in plug mould (Bio-Rad 1703713 ...
-
bioRxiv - Molecular Biology 2021Quote: ... The beads were fully resuspended by vortexing and incubated at 55°C for 15 minutes in a C1000 Touch thermal cycler (BIO-RAD) then re-pelleted with the magnet ...
-
bioRxiv - Cell Biology 2022Quote: ... 100 μl of the cell suspension was spread on a single partitioned YPDA plate and incubated at 30°C for 48 h prior to imaging on a ChemiDoc imaging system (Bio-Rad). The area of all colonies ...
-
bioRxiv - Cell Biology 2020Quote: ... lysates were cleared by centrifugation at 16000xg for 5 min at 4°C and the total protein concentration in the lysates was measured by Bradford protein assay (Bio-Rad). For western blot analysis 25 µg of each lysate was boiled for 5 min at 98°C (for the detection of LC3B and ATG9A samples were heated at 60°C for 10 min ...
-
bioRxiv - Immunology 2019Quote: ... 40 cycles of reaction including denaturation at 94° C for 15 sec followed by annealing at 60° C for 30 sec were carried out using C1000 thermal cycler CFX96 real-time system (Bio-Rad). Gene expression was normalized to beta actin ...
-
bioRxiv - Pathology 2019Quote: ... 20% methanol and MilliQ water) overnight at 4°C in a wet transfer apparatus at 70 mA constant voltage (Bio-Rad). Detection of the chemiluminescence immunochemical reaction was performed on a ChemiDoc ™ XRS + Molecular Imager® (Bio-Rad ...
-
bioRxiv - Neuroscience 2019Quote: ... 0.02% NaN3 and 1 mM DTT at pH 7.4 at 37°C in a thermal cycler (BioRad DNA Engine PTC-200). In some cases ...
-
bioRxiv - Bioengineering 2019Quote: Optimal MIP annealing temperature was determined to be 60.4 °C based on yield after circularization with a gradient of annealing temperatures ranging from 58–70 °C on a CFX96 Real-Time qPCR System (Bio-Rad). For all of these experiments ...
-
bioRxiv - Bioengineering 2019Quote: ... qPCR was conducted for 50 cycles at an annealing temperature of 56 °C on a CFX Connect Real-Time PCR Detection System (Bio-Rad). A melt curve was generated at the end of the PCR reaction and a subset of reactions were run on a 1% agarose gel to ensure that only one product of the expected size was amplified per primer pair ...
-
bioRxiv - Plant Biology 2020Quote: ... Liposomes were eluted from the beads by boiling at 95°C for five minutes after the addition of 10x sample reducing agent (Nupage, NP0009) and 4x Laemmli sample buffer (Biorad, #1610747).
-
bioRxiv - Biochemistry 2021Quote: ... The melting curves were measured at 1°C/min at the FRET channel in triplicate measurements and the data analyzed with CFX Manager™ (BioRad).
-
bioRxiv - Biochemistry 2021Quote: ... 5 μg of lysate was heat denatured for 3 minutes at 95°C for 3 minutes and resolved on a pre-cast 4-15 % SDS-PAGE gels (Bio-Rad) at 200V for 45 minutes in 1X running buffer (25mM Tris pH 8.3 ...
-
Enzymatic RNA Biotinylation for Affinity Purification and Identification of RNA-protein InteractionsbioRxiv - Biochemistry 2020Quote: ... Protein was eluted from beads by heating for 5 min at 95 °C in 1X Laemmli Buffer (Bio-Rad, Hercules, CA). Retrieved protein was detected by standard immunoblotting techniques using the following antibodies ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was incubated for 90 minutes at 4°C before the resin was collected in a 20 mL disposable column (Bio-Rad) and washed with 100 mL Buffer B + 150 mM NaCl ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was incubated for 90 minutes at 4°C before the resin was collected in a 20 mL disposable column (Bio-Rad) and washed with 100 mL Buffer D ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was incubated for 90 minutes at 4°C before the resin was collected in a 20 mL disposable column (Bio-Rad) and washed with 100 mL Buffer C + 400 mM NaCl ...
-
bioRxiv - Pathology 2021Quote: ... maximum power with 30 second intervals and the lysate obtained by ultracentrifugation at 100,000 g for 60 minutes, 4°C (CS 100FNX, HITACHI) resuspended in PBS and the concentration was measured by Bio-Rad protein assay dye reagent concentrate (BioRad) ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... 72°C for 30 sec and followed by a melting curve) was performed in a CFX Real-Time Detection System (Bio-Rad) and relative expression calculated using the CFX Manager Software (Bio-Rad).
-
bioRxiv - Plant Biology 2021Quote: ... and incubated on a rotary shaker for 60 min at 4°C before transfer to a Poly-Prep Chromatography Column (Bio-Rad). The column bed was washed with 40 ml of a wash buffer containing 50 mM Tris-HCl (pH 7.5) ...
-
bioRxiv - Biochemistry 2020Quote: ... The melting curves were measured at 1°C/min at the FRET channel and the data analyzed with CFX Manager™ (BioRad).
-
bioRxiv - Bioengineering 2021Quote: ... 15 µg of the extracted protein samples were boiled for 5 minutes at 95 °C in 4X laemlli buffer (BioRad; 1610747), run on mini-PROTEAN TGX precast gels (Bio-Rad ...
-
bioRxiv - Cell Biology 2021Quote: ... according to their molecular weight and transferred to a nitrocellulose Hybond-C membrane using an iBlot Gel Transfer Device (Bio-Rad) or using a wet-transfer system (if protein molecular weight >120kDa) ...
-
bioRxiv - Plant Biology 2020Quote: ... Plates were incubated for 30 °C for 5 or 7 days and imaged using a ChemiDoc MP Imaging System (Bio-Rad).
-
bioRxiv - Microbiology 2020Quote: ... Clarified lysates were incubated with 2 ml of glutathione resin and rotated for 1 h at 4°C in a 25 ml disposable drip column (Bio-Rad). Settled resin was washed with 25 column volumes (CV ...
-
bioRxiv - Microbiology 2021Quote: ... RNA samples were stored at −80°C until cDNA synthesis using the iScript™ gDNA Clear cDNA Synthesis Kit according to the manufacture’s guidelines (BIO-RAD). A qPCR-based assay was used to detect and quantify PfCSP transcripts (Kefi et al. ...
-
bioRxiv - Biochemistry 2021Quote: ... The samples were heated from 20 to 95 °C at the rate of 1 °C min-1 and fluorescence signals were monitored using quantitative real-time PCR (CFX96 Real-Time System, Bio-Rad). Each experiment was done in triplicate and the average values were taken for analysis ...
-
bioRxiv - Microbiology 2020Quote: ... Proteins that bound to PI(3)P or control beads were eluted by boiling at 90–95 °C for 20 min in 70 μL 4x Laemmli sample buffer (Bio-Rad) and centrifuging at 20,000 g for 15 min ...
-
bioRxiv - Cell Biology 2021Quote: ... The supernatant was collected after centrifugation at 15,000 ×g for 15 min at 4°C and applied to a 20 mL open column (Poly-Prep Chromatography Columns; BIO-RAD) containing 500 µL of Ni-NTA agarose (Qiagen ...
-
bioRxiv - Biophysics 2021Quote: ... fPanx1ΔC purity was assessed by SDS–polyacrylamide gel electrophoresis (PAGE) using 4-20% pre-cast gradient Tris-glycine gel (Bio-Rad) stained with Simply Blue (SimpleBlue Safe Stain ...
-
bioRxiv - Cell Biology 2022Quote: ... lysates were then clarified through centrifugation (14’000 g, 20 minutes, 4°C) and then quantified using Bradford Reagent (Bio-Rad Laboratories) according to manufacturer’s instructions.
-
bioRxiv - Biochemistry 2022Quote: ... The samples were separated on a pre-heated 45 cm sequencing gel (45 °C, 65 W, 1 h) and visualized using a ChemiDoc Imaging System (Bio-Rad).
-
bioRxiv - Molecular Biology 2022Quote: ... 5’-ATG GGT TCG CAT GGT CCT AAT GAC ACA C-3’) (Cousineau et al., 2022) and the GAPDH loading control (PrimePCR Probe assay with HEX probe, Bio-Rad). Each 20 µL reaction contained 500 ng of total RNA ...
-
bioRxiv - Plant Biology 2022Quote: ... The extract was centrifuged at 18,000 g for 10 minutes at 4 °C and the protein content of the supernatant determined using the Bradford method (Bio-Rad) in a spectrophotometer measuring the absorbance at 595 nm and then eluted in Laemmli 2X buffer with 8 % β-mercaptoethanol (95 °C for 5 minutes) ...
-
bioRxiv - Cell Biology 2022Quote: ... denatured in 2x Laemmli buffer (5 min at +95°C) and 20 µg were loaded per well of Mini-PROTEAN Precast Gel (Bio-Rad). The protein transfer was done with the Trans-Blot Turbo system (Bio-Rad) ...
-
bioRxiv - Cell Biology 2022Quote: ... Membranes were incubated with primary and HRP-secondary antibodies in TBST buffer with 5% milk (RT for 1 hour or overnight at 4 °C) and revealed with an ECL solution (BIO-Rad) following manufacturer’s instructions.
-
bioRxiv - Cancer Biology 2022Quote: ... Samples were incubated at 95 °C for 5 minutes prior to being resolved on a 4 – 15% Mini-PROTEAN TGX Precast Protein Gels (Bio-rad) and transferred onto a methanol activated Immobilon-P PVDF membrane (Millipore ...
-
bioRxiv - Cell Biology 2022Quote: ... supplemented with beta-mercaptoethanol and denaturated at 95 °C for 5 min before loading on a 12 % PAA precast gel (#4561044, Bio-Rad). The gel was run at 70 V for 15 min and then 100 V for 1 h ...
-
bioRxiv - Immunology 2020Quote: ... Samples were heated at 95°C for 3 minutes and run on a 8 – 16% or 4 – 20% TGX-Criterion gel (Bio-Rad). The separated proteins were transferred to PVDF membranes and blocked in PBS containing 0.2% fish skin gelatin (Sigma-Aldrich ...
-
bioRxiv - Molecular Biology 2020Quote: ... Protein extracts were centrifuged at 20000 g for 20 min at 4 °C and then filtered by gravity using Poly-Prep chromatography columns (731-1550, Bio-Rad). Supernatants were filtered by gravity through Poly-Prep chromatography columns (731-1550 ...
-
bioRxiv - Immunology 2020Quote: ... Protein for immunoblotting was eluted from 25% of beads by heating at 95°C for 5 minutes in 2X Laemmli sample buffer (Bio-Rad). RNA was extracted from the remaining 75% of beads using TRIzol (Thermo Fisher) ...
-
bioRxiv - Neuroscience 2020Quote: ... After rinses with PBS-0.1% Tween 20 (PBST), sections were incubated overnight at 4°C with rabbit anti-Iba1 (Wako, 019-19741) and anti-BrdU (Biorad, MCA2060). After washes with PBST ...
-
bioRxiv - Microbiology 2020Quote: ... Washed cells were embedded in 2 % Low melt agarose plugs and cells were lysed (1 hr at 37°C) with lysozyme enzyme (100 μl) using CHEF Bacterial Genomic DNA Plug Kit (Bio-Rad). DNA containing plugs were washed twice with nuclease free water then treated with Proteinase K (Qiagen ...
-
bioRxiv - Microbiology 2020Quote: ... The lysates were boiled for 5 min at 95°C in 1x XT sample buffer containing 1x XT reducing agent (both from Bio-Rad) and resolved on 4-12% Bis-Tris XT precast gels (Bio-Rad) ...
-
bioRxiv - Cell Biology 2020Quote: Protein samples were denatured for 5 min at 95 °C and run on Mini or Midi TGX-Stain-free precast gels (Bio-rad) at 110V for 60 min (mini gels ...