Labshake search
Citations for Eppendorf :
51 - 100 of 861 citations for 6 Chloro 3 4 dihydro 4 methyl 3 oxo 2H 1 4 benzoxazine 8 carboxylic Acid d3 Methyl Ester since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2024Quote: ... samples were layered on top of the 105 µl cushion and spun at 10,000 g for 20 min at 4°C in a swing out rotor (A-8-11 swing bucket rotor, Eppendorf) to isolate CpxII bound to trans SNARE complexes (SNAREpins ...
-
bioRxiv - Biochemistry 2021Quote: ... The reactions were stopped by the addition of phosphoric acid and 4 µl of each reaction were spotted on P81 phosphocellulose papers (Whatman) using the epMotion 5070 (Eppendorf) workstation ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
bioRxiv - Biophysics 2020Quote: ... The cell suspension was subsequently centrifuged for 30 min at 4°C and 3250 × g (Eppendorf Swing-bucket rotor A-4-62). The supernatant was discarded ...
-
bioRxiv - Biochemistry 2022Quote: ... The resin was pelleted down by centrifugation at 4°C (1258 g for 5 min, A-4-81 rotor, Eppendorf, Enfield, CT) and washed with ice-cold 50 mL Binding buffer composed of 10mM imidazole (pH 7.4) ...
-
bioRxiv - Biochemistry 2022Quote: ... 4 °C for 10 sec (5424-R Eppendorf microfuge) and the pellet was resuspended with 400 μl TES Solution (10 mM Tris-HCl ...
-
bioRxiv - Biophysics 2021Quote: ... 20°C for 4 hours (Thermomixer 5355 R, Eppendorf). After incubation ...
-
bioRxiv - Molecular Biology 2022Quote: ... Reactions were performed in a Realplex 4 Thermocycler (Eppendorf) using the following program ...
-
bioRxiv - Genetics 2024Quote: ... 000 RPM for 10 minutes at 4°C (Eppendorf), followed by transfer of the plasma to tubes ...
-
bioRxiv - Microbiology 2024Quote: ... 4°C for 20 minutes (Eppendorf® 5418 R) to collect all the cells ...
-
bioRxiv - Biochemistry 2021Quote: ... Unreacted dye was removed by two passages over an equilibrated Bio-spin® 6 column filled with Bio-gel P-6 media in labeling buffer and centrifuged in a tabletop centrifuge (Eppendorf 5810 R, rotor A-4-62) at 1500 rpm for 3 min ...
-
bioRxiv - Molecular Biology 2022Quote: ... Cell pellets of OD600 = 3-6 units (as measured using an Eppendorf BioPhotometer) were resuspended in 300 µL of 20 % TCA and 100 µL of acid-washed glass beads ...
-
A DNA-based optical nanosensor for in vivo imaging of acetylcholine in the peripheral nervous systembioRxiv - Bioengineering 2020Quote: The DNA scaffold was self-assembled by incubating 5 DNA oligonucleotides following a temperature gradient from 95 °C to 4 °C for 6 h in a thermocycler (Mastercycler® nexus X2, Eppendorf) in Tris-EDTA buffer (TE buffer ...
-
bioRxiv - Neuroscience 2020Quote: ... for 30 min at 4°C on centrifuge (Eppendorf #5804R) and rotor (Eppendorf #S-4-72) ...
-
bioRxiv - Cell Biology 2022Quote: ... Microneedles were manually controlled with an InjectMan 4 micromanipulator (Eppendorf). The compensation pressure set on the FemtoJet was 35hPa for the whole injection experiment to avoid damages on cells ...
-
bioRxiv - Biophysics 2022Quote: ... The probe was controlled with a micromanipulator (Injectman 4; Eppendorf) and mounted on an inverted epifluorescent microscope.
-
bioRxiv - Molecular Biology 2024Quote: ... followed by high-speed centrifugation (4°C, 12000rpm, Eppendorf, 5424R) for 20 minutes to collect the protein supernatant ...
-
bioRxiv - Microbiology 2023Quote: ... The supernatant was centrifuged (Eppendorf 5810R, A-4-62 Rotor) for 10 minutes at 500 x g to separate the remaining blood cells from the plasma.
-
bioRxiv - Cell Biology 2024Quote: ... Microneedles were manually controlled with an InjectMan 4 micromanipulator (Eppendorf). Microinjection of cells were performed on an inverted microscope (Nikon Ti2 Eclipse ...
-
bioRxiv - Bioengineering 2024Quote: ... Homogenates were agitated at 4°C in a thermomixer (Eppendorf) for 2 hours ...
-
bioRxiv - Cell Biology 2024Quote: ... The probe was controlled with a micromanipulator (Injectman 4, Eppendorf), and mounted on an inverted epifluorescence microscope.
-
bioRxiv - Cell Biology 2024Quote: ... 4℃ for 15 min using Eppendorf 5810R Centrifuge (Eppendorf, Germany) with A-4-81 Rotor (Eppendorf ...
-
bioRxiv - Genetics 2024Quote: ... in a 96-well Eppendorf Realplex 4 PCR machine (Eppendorf).
-
bioRxiv - Cancer Biology 2024Quote: ... 4°C for 10 minutes using a 5415R microcentrifuge (Eppendorf) and supernatants were transferred ...
-
bioRxiv - Biochemistry 2022Quote: ... 0.01% Tween 20) for 1 h at 4 °C and 1200 rpm in a thermomixer (Eppendorf). Unbound protein was removed by washing 2x with high salt buffer (50 mM HEPES pH 7.5 ...
-
bioRxiv - Plant Biology 2021Quote: ... samples were centrifuged (20 min, 15,000g, 4°C, in an Eppendorf 5810R centrifuge ...
-
bioRxiv - Genomics 2021Quote: ... and held at 4 C° using the Mastercycler Nexus (Eppendorf, Australia). This was then cycled a total of 40 times ...
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... and centrifuged at 13 000 rpm/15 minutes/4°C (Eppendorf Centrifuge 5415R ...
-
bioRxiv - Microbiology 2024Quote: ... veronii cultures were centrifuged for 4 min at 12,000 rpm (Eppendorf centrifuge 5810R with an F-34-6-38 rotor ...
-
bioRxiv - Cancer Biology 2024Quote: ... or a realplex 4 qPCR 96-Well Real Time Cycler (Eppendorf) with 5% of the immunoprecipitated DNA used in a 20 ul PCR reaction ...
-
bioRxiv - Cancer Biology 2024Quote: ... in a Realplex 4 qPCR 96-Well Real Time Cycler (Eppendorf). Ct values were internally normalized to GAPDH for each sample ...
-
bioRxiv - Molecular Biology 2023Quote: ... Melting curves were obtained on a qPCR machine (Eppendorf RealPlex 4), ramping up from 25 to 95 °C ...
-
bioRxiv - Neuroscience 2023Quote: ... and 10,000 × g at 4 °C for 30 min (Eppendorf 5910R). Pre-cleared supernatants were subjected to ultracentrifugation at 29,000 rpm using a Beckman SW40 Ti rotor (RCFavg ...
-
bioRxiv - Microbiology 2023Quote: ... The resulting supernatant was centrifuged (Eppendorf 5810R, A-4-62 Rotor) for 10 minutes at 500 x g to separate the cells from plasma ...
-
bioRxiv - Cancer Biology 2021Quote: ... 3-6 pooled tissue biopsies were moved into a precooled 1.5 mL tube (Eppendorf, Germany) containing 300µL digestion cocktail consisting of Gibco RPMI 1640 (Thermo Fisher Scientific ...
-
bioRxiv - Biophysics 2022Quote: ... The lysate was incubated for 30 min on a rotating wheel at 4°C and centrifuged at 16 000 g for 20 min at 4°C (Eppendorf centrifuge 5417-R, Rotor F45-30-11). The supernatant was transferred to a fresh 1.5 ml Eppendorf tube and the pellet was discarded ...
-
bioRxiv - Biochemistry 2020Quote: ... The rest of the solution was incubated at 4 °C for 1 h on a thermomixer (Eppendorf) set to 1000 rpm ...
-
bioRxiv - Molecular Biology 2020Quote: ... Cell debris was removed via centrifugation at 13,000g for 1 hour at +4°C (Eppendorf 5810r centrifuge). A 1 ml HisTrap FF Crude chromatography column (GE Healthcare ...
-
bioRxiv - Cell Biology 2020Quote: ... This isolation method included a penultimate centrifugation step in Eppendorf polypropylene conical tubes (10,000 x g for 30 min at 4°C, in Eppendorf rotor F-34-6-38) that allowed the removal/isolation of larger microvesicles ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... pelleted for 10min (4°C, max speed, Eppendorf 5415 D benchtop centrifuge), dried for ~10min under vacuum ...
-
bioRxiv - Bioengineering 2022Quote: ... Cells were harvested by centrifugation (3200 g, 40 min, 4 °C; Eppendorf centrifuge 5810 R ...
-
bioRxiv - Bioengineering 2022Quote: ... By centrifugation (3200 g, 30 min, 4 °C; Eppendorf centrifuge 5810 R), soluble proteins were separated from cell fragments and insoluble proteins ...
-
bioRxiv - Bioengineering 2021Quote: ... This was followed by a 4 h centrifugation step (Eppendorf Centrifuge 5424R) at 21,130 × g and 4°C to remove SWCNT aggregates ...
-
bioRxiv - Immunology 2022Quote: ... centrifuging 400xg for 10 min (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature to pellet the cells ...
-
bioRxiv - Microbiology 2021Quote: ... centrifuged at maximum speed for 15 min at 4°C (5804 Eppendorf) to separate phases ...
-
bioRxiv - Genomics 2020Quote: ... and finally held at 4 C° using the Mastercycler Nexus (Eppendorf, Australia). PCR products were then purified with the Zymo DNA Clean & Concentrator Kit™ (Zymo Research ...
-
bioRxiv - Cell Biology 2022Quote: ... Tissue culture plates were centrifuged at 4° C and 500 rcf (Eppendorf 5810 R tabletop centrifuge ...
-
bioRxiv - Cell Biology 2023Quote: ... tissue culture plates were centrifuged at 4° C and 500 rcf (Eppendorf 5810 R tabletop centrifuge ...