Labshake search
Citations for Eppendorf :
401 - 450 of 861 citations for 6 Chloro 3 4 dihydro 4 methyl 3 oxo 2H 1 4 benzoxazine 8 carboxylic Acid d3 Methyl Ester since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Plant Biology 2022Quote: ... with incubation on ice for 1 h followed by centrifugation at 4 °C for 20 min at 20,000 g using an Eppendorf Centrifuge 5430R microcentrifuge (Eppendorf Canada Ltd, Mississauga, ON, Canada), supernatant combined and either used same day or stored at –80 °C.
-
bioRxiv - Biochemistry 2023Quote: ... 12,000 rpm was applied for 30 minutes at 4 °C to obtain the supernatant and then evaporated to obtain a dry metabolite pellet (Eppendorf Concentrator plus, Hamburg, Germany). For the NMR experiments ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... a mixture of the antibody constructs with a 10-fold molar excess of DFO*-NCS (5 mg/mL in DMSO) (ABX, Radeberg, Germany) was incubated ON at 4 °C with gentle shaking (Eppendorf ThermoMixer, Merck, Darmstadt, Germany). The DFO*-derivatized constructs were purified by SE-HPLC under the same conditions as described above.
-
bioRxiv - Biochemistry 2024Quote: ... Proteins were pelleted by centrifugation at 15.000 x g (10 min, 4°C in cold cabinet, Eppendorf centrifuge #5418, rotor FA-45-18-11). After allowing the pellet to air dry ...
-
bioRxiv - Biophysics 2022Quote: ... the DNA droplet-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). For the segregation of DNA droplets using enzymatic activity ...
-
bioRxiv - Biophysics 2022Quote: ... The aqueous solution was layered on top of the oil-surfactant mix in a volumetric ratio of 1:3 inside a microtube (Eppendorf). The tube was manually shaken for about 30 s until water-in-oil droplets formed ...
-
bioRxiv - Biophysics 2020Quote: ... the DNA-containing aqueous phase was layered on top of the oil phase in a volumetric ratio of 1:3 within a microtube (Eppendorf). Droplet formation was induced by manual shaking for about 4 s as described earlier.[26] For the oil-phase ...
-
bioRxiv - Genomics 2024Quote: ... and washed in nuclease-free H2O before proceeding to MNase digestion with 1-2U of MNase for 3×106 cells that went on for 1-hour at 37C while shaking in a thermomixer (Eppendorf) at 550rcf ...
-
bioRxiv - Immunology 2022Quote: ... Cells were washed with 500μl of D-PBS and centrifuged at 400xg for 10 minutes at room temperature (Eppendorf Centrifuge 5810R, rotor A-4-62). The supernatant was removed and the cell pellet resuspended in 50μl of D-PBS before being stained with CD20-PE (clone A1SB12 ...
-
bioRxiv - Neuroscience 2021Quote: ... were incubated with ten-fold molar excess S-XL6 for 4 hours at 37 °C in protein low bind Eppendorf tubes using Eppendorf Thermomixer at 350 rpm (Eppendorf North America, Enfield, CT, USA). After incubation ...
-
bioRxiv - Synthetic Biology 2022Quote: ... Plates were then centrifuged at 330 rpm for 3 min (Eppendorf, Centrifuge 5810). Plates were then incubated at 37°C for 24 hours ...
-
bioRxiv - Bioengineering 2022Quote: ... Cells were centrifuged 3 minutes at 800-1000 RPM (Eppendorf 5810 tabletop centrifuge) and resuspended ...
-
bioRxiv - Neuroscience 2022Quote: ... Half medium was changed every 2-3 days using Xplorer multichannel pipettes (Eppendorf) set at lowest speed to not disturb the hostdonor interaction ...
-
bioRxiv - Microbiology 2023Quote: ... qPCR analysis was carried out in 96 well plates using Quantstudio 3 (Eppendorf). Amplification was carried out at 95°C for 15 min and 50 cycles at 95°C for 15s ...
-
bioRxiv - Biochemistry 2020Quote: Microdissected tissue samples were lysed in SDT buffer (4% SDS, 0.1M DTT, 0.1M Tris/HCl, pH 7.6) in a thermomixer (Eppendorf ThermoMixer® C, 30 min, 95°C, 750 rpm). After that ...
-
bioRxiv - Microbiology 2022Quote: ... Trophozoites were harvested from their growth support by incubating the tubes by tapping the glass tubes followed by centrifugation (Eppendorf centrifuge 5810R, rotor A-4-62) according to a previously reported protocol 84.
-
bioRxiv - Bioengineering 2024Quote: ... Cultures were further incubated overnight (900 RPM, 20 °C, 70 % humidity, 20 h) and harvested by centrifugation (Eppendorf 5810R; 3,220 x g, 4 °C, 15 min). The obtained cell pellet was resuspended with 150 µL buffer (50 mM Bicine ...
-
bioRxiv - Cell Biology 2022Quote: ... 0.1% SDS for 2h at 50°C with shaking at 500rpm using Thermomixer (Eppendorf). Then ...
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
High resolution, serial imaging of early mouse and human liver bud morphogenesis in three dimensionsbioRxiv - Developmental Biology 2021Quote: ... Cells were centrifuged 3 minutes at 800-1000 RPM (Eppendorf 5810 table top centrifuge) and resuspended ...
-
bioRxiv - Genomics 2020Quote: ... 3 ml of each bacterial suspension were centrifuged at 6,000 × g (Eppendorf, Westbury, NY) for 2 mins ...
-
bioRxiv - Plant Biology 2020Quote: ... The homogenates were centrifuged at 1,000 g for 3 min (Eppendorf 5430, Hamburg, Germany). The subsequent steps of the RNA extraction were performed on the supernatants according to the manufacturer’s specifications ...
-
bioRxiv - Biochemistry 2022Quote: ... for 3 min and then reduced to dryness in a Vacufuge centrifugal concentrator (Eppendorf).
-
bioRxiv - Cancer Biology 2024Quote: ... 3 times for 5 seconds each to ensure homogenization and centrifuged at 14000 x g for 10 minutes at 4° C (Eppendorf centrifuge 5424 R, FA-45-24-11 rotor). Supernatant was precleared by rotating 20 µl Protein A agarose beads (Cell Signaling #9863 ...
-
bioRxiv - Microbiology 2021Quote: ... and centrifuged for 3 min at 13806 rpm (Centrifuge 5424, FA-45-24-11, Eppendorf) before use ...
-
bioRxiv - Bioengineering 2022Quote: ... the purification was carried out in 3 steps using a standard centrifuge (Eppendorf centrifuge 5425). We washed the sample using ethanol and 2 washing buffers provided by the kit ...
-
bioRxiv - Neuroscience 2022Quote: ... was added per well using electronic 12-channel pipettes in speed 3 (e12c-pip; Eppendorf). The plates were temporality incubated at 37°C ...
-
bioRxiv - Systems Biology 2022Quote: ... 3) collected filtrate was evaporated dry over-night in a concentrator (Eppendorf® concentrator plus) under vacuum conditions ...
-
bioRxiv - Systems Biology 2022Quote: ... After denaturation at 78 °C for 3 min on a flatblock thermocycler (Eppendorf, Mastercycler Nexus), samples were incubated at 45 °C for 36–48 hr in a benchtop incubator ...
-
bioRxiv - Microbiology 2024Quote: ... The 3mL of homogenized tissue were divided into 3 clean 1.5 mL microcentrifuge tubes (Eppendorf) each with 1 mL of tissue lysate ...
-
bioRxiv - Systems Biology 2024Quote: ... bacterial cultures were centrifuged at 2451 rcf for 3 mins (Centrifuge 5810, Eppendorf, Hamburg, Germany), and the supernatant was taken out and filtered into fresh 50mL tubes using 0.2µm syringe filter (83.1826.001 ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1:1v/v mixture of 33% ammonium hydroxide and 40% methylamine in water for 3 h at 37 °C (Eppendorf ThermoMixer C, 1000 rpm). The suspension was filtered ...
-
bioRxiv - Neuroscience 2020Quote: ... Microinjection of 300 nl was made over 3 min using a Femtojet injector (~5 psi, Eppendorf), and the exposed cortical surface was covered by a sterilized round cover glass (3 or 4 mm in diameter ...
-
bioRxiv - Biochemistry 2022Quote: ... 3 ml was aliquoted to each of the duplicate 5.0 mL tubes (Eppendorf Tubes®, Germany) while 50 μL was aliquoted to each of the duplicate 200 μL Polymerase Chain Reaction (PCR ...
-
bioRxiv - Plant Biology 2022Quote: ... Fermentation was conducted in approximately 3 L of culture in a bioreactor BioFlo120 (Eppendorf, Hamburg, Germany) at 30°C for 5 days ...
-
bioRxiv - Genetics 2022Quote: ... and spun at 100x g for 3 min in a swing-bucket centrifuge (e.g., Eppendorf 5804R). The cycling conditions are 95°C for 3 min ...
-
bioRxiv - Microbiology 2023Quote: ... the fermentation broth was centrifuged at 9000 r/min for 3 min (Eppendorf Centrifuge 5424, Germany), and the resultant pellet was collected for bacterial DNA extraction using the FastDNA® Spin Kit for Soil (MP Biomedicals ...
-
bioRxiv - Microbiology 2024Quote: ... and 22 h post-induction by centrifugation at 8,000 rpm for 3 min (Eppendorf 5417C centrifuge) and in 3 mL volumes 4 h post-induction by centrifugation at 7,197 x g for 5 min (Sorvall X4RF PRO-MD centrifuge) ...
-
bioRxiv - Bioengineering 2024Quote: ... Stained 3T3 suspension is washed with co-culture media 3 times using a centrifuge (5702, Eppendorf). 3T3 suspension is then added to the keratinocyte dish with a density of 1000 cells/mm^2 ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The grown cultures were pelleted using a centrifuge (Eppendorf, 5804 R; 5000 RPM, 22°C, 3 min), washed and re-suspended in 0.8% sterile NaCl solution ...
-
bioRxiv - Microbiology 2022Quote: ... The tip of the remaining 3 swabs were broken off into a 1.5 ml tube (BioPur, Eppendorf) containing 0.3 ml sterile PBS to isolate microbiota.
-
bioRxiv - Molecular Biology 2024Quote: ... and the resulting mixture was shaken for 3 h at 65 °C (Eppendorf ThermoMixer C, 1000 rpm). The reaction was quenched by addition of 0.05 M NaHCO3 in water (ca ...
-
bioRxiv - Genomics 2024Quote: ... This was modified to 3 minutes at 37°C with light shaking on a Thermomixer instrument (Eppendorf) at 450rpm ...
-
bioRxiv - Systems Biology 2023Quote: ... samples were pelleted at 6,010 x g for 3 minutes using a bench top centrifuge (Eppendorf 5424/5424R). 100% DMSO was added to resuspend the cell pellet with gentle pipetting until the pellet was completely broken down ...
-
bioRxiv - Molecular Biology 2023Quote: 10xGenomic single cell 3′ library was prepared as follows: single cells were sorted into 1.5 mL tubes (Eppendorf) and counted under the microscope ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was then removed and nuclei were gently resuspended in 1.5 ml of HONDA buffer and split into 3 x 1.5 ml DNA LoBind tubes (Eppendorf). Samples were centrifugated at 2,000 g for 10 minutes to pellet nuclei and the supernatant was removed ...
-
bioRxiv - Synthetic Biology 2020Quote: ... These reactions were incubated for 3 h at 30°C with 500 rpm shaking (Thermo Mixer C, Eppendorf, Germany). Post-incubation ...
-
bioRxiv - Cancer Biology 2021Quote: ... Proteins were eluted in 40 μL of 0.2 M glycine pH 3 for 30 min on a ThermoMixer (Eppendorf) at 900 rpm at room temperature ...
-
bioRxiv - Cell Biology 2020Quote: ... spun at 13,000 rpm for 3 min and the supernatant transferred to clean 1.5 ml tubes (Eppendorf, Hamburg, Germany). An equal volume of isopropanol (Sigma Aldrich ...
-
bioRxiv - Plant Biology 2023Quote: ... Bound phosphopeptides were then eluted 3 times with 100 µL ammonium hydroxide (5% v/v) into 1.5mL Lo-Bind tubes (Eppendorf). These were then frozen and lyophilized ...