Labshake search
Citations for Eppendorf :
551 - 600 of 724 citations for tert Butyl trans 17 bromo 4 7 10 13 tetraoxa 15 heptadecenoate since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2023Quote: ... cells were labeled with 50 nM of biotinylated human ACE2 protein (Acro Biosystems, AC2-H82E6) for 30 minutes at 4°C at 700 RPM on a shaker (Eppendorf, ThermoMixer C). The cells were subsequently washed ...
-
bioRxiv - Biophysics 2023Quote: ... This pre-gel solution was kept at 4 °C inside an amber UV-protected 1.5 mL microcentrifuge tube (Eppendorf®, Hauppauge, NY), and degassed for 1 h inside a vacuum chamber to reduce oxygen concentration and prevent early gelation inside the driving syringe while running the experiment ...
-
bioRxiv - Plant Biology 2023Quote: ... The primers were annealed at 95°C for 4 min followed by 70°C for 3 min in a thermocycler (Eppendorf, Hamburg, Germany). The reaction was allowed to cool slowly to room temperature ...
-
bioRxiv - Microbiology 2024Quote: ... The mixture was centrifuged for 30 min at 15000 rpm at 4°C in the centrifuge Eppendorf 5702RH (Eppendorf SE, Hamburg, Germany). The pellet was resuspended in the 1/5 of the in initial volumes in PBS buffer (ThermoFischer Scientific ...
-
bioRxiv - Systems Biology 2024Quote: ... with a mounted tissue section was dried to 37°C for 4 minutes on a thermal incubator (Eppendorf Thermomixer Option C, Germany) followed by in situ fixation in 4% PFA (Sigma Aldrich ...
-
bioRxiv - Developmental Biology 2024Quote: ... To create extrachromosomal arrays constructs were microinjected into distal gonads of young adults using inverted microscope Leica DMi8 equipped with DIC filters and microinjection system InjectMan® 4 and FemtoJet® 4i (Eppendorf). Microinjection mixtures contained 10 ng/μL of the plasmid of interest ...
-
bioRxiv - Developmental Biology 2024Quote: Chromatin was pre-cleared by centrifugation at 14,000×g for 15min at 4°C and the supernatant was moved to a 1.5mL DNA LoBind® tube (Eppendorf: Hamburg, Germany). From each chromatin sample per phenotype per lineage ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was collected after centrifugation at 4 °C for 5 min at 5000 g and dried using a SpeedVaq (Eppendorf, Montesson, France). Then ...
-
bioRxiv - Bioengineering 2024Quote: ... 500μl of samples previously diluted by 10 in DPBS were deposited in Amicon® filter before centrifugation at 2000g during 15min at 4°C (Centrifuge 5804 R, Eppendorf®). Then ...
-
bioRxiv - Immunology 2024Quote: ... stool suspensions of feces (in H2O) were centrifuged at 16000 rpm and 4°C for 5 min using an Eppendorf 5427R centrifuge (Eppendorf; Hamburg, Germany). 100 µL of supernatant were mixed with 400 µL of ice-cold methanol containing recovery standards for evaluation of the quality of cell harvest and correction for variations ...
-
bioRxiv - Immunology 2024Quote: ... Before preparation for LC-MS analysis each sample was centrifuged at 16000 rpm and 4°C for 5 min using an Eppendorf 5427R centrifuge (Eppendorf; Hamburg, Germany). From each supernatant 350 µL were pipetted into two separate LC vials ...
-
bioRxiv - Immunology 2021Quote: ... the culture supernatant was centrifuged at 2000 × g for 10 min (Centrifuge 5810R, Eppendorf, Hauppauge, NY) to remove cell debris before EV purification ...
-
bioRxiv - Bioengineering 2021Quote: ... each pre-culture was diluted 1:10 and the OD600 was measured with the BioSpectrometer (Eppendorf). The OD was then adjusted to 0.1 in YPM medium and three replicates with 300 μL of each pre-culture were transferred to a 48-sterile well plate and mixed (360 rpm ...
-
bioRxiv - Bioengineering 2022Quote: ... This enzymatic reaction was stopped at 50°C for 10 min in a thermoblock (ThermoMixer, Eppendorf). The protein-digested exDNA was finally purified using GeneJET NGS Cleanup Kit (Thermo Scientific ...
-
bioRxiv - Neuroscience 2022Quote: ... Lysate was spun at 800 g for 10 min (spin 1) to remove cell debris (Eppendorf Centrifuges 5430 with Eppendorf FA-45-48-11 30-spot 45-degree fixed angel rotor) ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... followed by 10 min of shaking at 65 °C and 2,000 rpm on a ThermoMixer (Eppendorf). RNA was extracted from the TRIzol mixture using Direct-zol (Zymo ...
-
bioRxiv - Neuroscience 2023Quote: ... 40 mM chloroacetamide and protease inhibitors for 10 minutes at 95ºC at 1000 rpm (Thermomixer, Eppendorf). Each sample was processed for proteomics analysis following the solid-phase-enhanced sample-preparation (SP3 ...
-
bioRxiv - Bioengineering 2023Quote: ... Cells were harvested via centrifugation at 6,900 × g for 10 min (Centrifuge 5420; Eppendorf, Hamburg, Germany), then washed with 1 V of fresh ...
-
bioRxiv - Cell Biology 2023Quote: ... The mixtures were then spun at 15,000 rpm for 10 min in a tabletop centrifuge (Eppendorf). The supernatant and pellet fractions were separated ...
-
bioRxiv - Biophysics 2024Quote: ... The coverslips were then vacuum dried for 10 min in a centrifuge concentrator (Concentrator plus, Eppendorf) without rotation ...
-
bioRxiv - Molecular Biology 2023Quote: ... followed by heat shock at 90°C for 10 min with 1,400 rpm (ThermoMixerTM, Eppendorf, Germany) and centrifugation (10,000× g ...
-
bioRxiv - Biochemistry 2022Quote: ... coli lysates were centrifuged at 14,000 g for 10 minutes on a 5425R benchtop centrifuge (Eppendorf) to clarify the samples ...
-
bioRxiv - Cell Biology 2023Quote: ... the plates were centrifuged at 3000g for 10 min in a swinging bucket centrifuge (Eppendorf, Germany) to separate the solid residue from the digested biomass ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... 10 mM MgCl2 at 37 °C for 120 min on a microplate shaker (Eppendorf, Hamburg, Germany). The metabolic stability of testosterone ...
-
bioRxiv - Biochemistry 2024Quote: ... The lysates were heated to 95°C for 10 min while shaking in a Thermomixer (Eppendorf). The rest of the workflow (tryptic digestion and desalting of peptides ...
-
bioRxiv - Cell Biology 2024Quote: ... then mixed at 950 rpm for 5 min at 10 °C in an Eppendorf Thermomixer (Eppendorf South Pacific Pty Ltd. ...
-
bioRxiv - Cell Biology 2024Quote: ... 5 µM AQT0615) and 10 µL were added in each well with a multichannel pipette (Eppendorf). The 0 % control wells were filled with 10 µL of pure reaction buffer ...
-
bioRxiv - Cell Biology 2024Quote: ... sealed and mixed at RT for 10 minutes on a Thermomixer Comfort plate shaker (Eppendorf™) at 500-800 rpm ...
-
bioRxiv - Microbiology 2021Quote: ... Development of ∼60 % cytopathic effect (CPE) led to harvesting and clarification of supernatants (3184 x g, 20 min, 4 °C, in an Eppendorf 5810 R centrifuge). Aliquots were then titred by plaque assay (see below) ...
-
bioRxiv - Microbiology 2021Quote: The rest of the supernatant cell suspension (~19 ml) was centrifuged in a swing-out rotor (Eppendorf A-4-62 Swing Bucket Rotor) at 3200 × g for 10 min to pellet cells ...
-
bioRxiv - Cancer Biology 2023Quote: ... at 4°C for 1 hour and centrifuged at 4°C at 14200 rpm for 50 min using a refrigerated table-top centrifuge (Eppendorf Centrifuge, Hamburg, Germany). The cleared lysates were loaded on wells of 96-well single-use filter micro-plates with 3 µm glass fibers and 25 µm polyethylene membranes (Agilent ...
-
bioRxiv - Biochemistry 2024Quote: ... The samples were then digested for 4 h at 37°C (1000 x rpm for 1 h, then 650 x rpm, Eppendorf ThermoMixer®C). Samples were then diluted 1:1 with milliQ water ...
-
bioRxiv - Physiology 2024Quote: ... Blood was allowed to clot on ice for 20 minutes then was spun down in a cold centrifuge (4°C, Eppendorf microcentrifuge, model 5415R) for 20 minutes at 2000 g ...
-
bioRxiv - Biochemistry 2020Quote: ... and centrifuged at 3,095 RCF (ambient temperature) for 10 min in a 5810 R centrifuge (Eppendorf, Germany), prior to aliquoting the supernatant ...
-
bioRxiv - Biochemistry 2021Quote: ... 10 μM Al.488-labeled TDP-43-MBP-His6 was set up in low binding tubes (Eppendorf) in aggregation buffer and incubated with or without 100 μg/ml His6-TEV protease ...
-
bioRxiv - Systems Biology 2020Quote: ... cells were separated from the supernatant using centrifugation at 7000 rpm for 10 min (Eppendorf 5415D microcentrifuge). Supernatants were then filtered using 0.22 μm syringe filters prior to being stored at −20°C.
-
bioRxiv - Microbiology 2020Quote: ... the chambered coverslip was centrifuged at 4000 rpm for 10 min in a bucket-swing rotor (Eppendorf).
-
bioRxiv - Microbiology 2021Quote: ... Samples were centrifuged at 7800 rpm for 10 min (centrifuge 5430R, rotor FA-45-24-11HS; Eppendorf). The supernatant was filtered through 0.22-μm-pore-size filters (Merck Millipore ...
-
bioRxiv - Microbiology 2020Quote: ... Suspensions were spun for 10 min at 1,000 rpm in a 5430 Eppendorf centrifuge (Eppendorf, Hauppauge, NY) to remove host cellular debris ...
-
bioRxiv - Physiology 2023Quote: ... The blood samples were centrifuged at 3350 rpm for 10 minutes at 20°C (Centrifuge Eppendorf 5804R). Serum samples were analyzed for SARS-CoV-2 antibodies ...
-
bioRxiv - Genomics 2023Quote: ... The sonicated chromatin is diluted 10 times with LB no SDS on protein low bind tubes (Eppendorf) and the chromatin fraction cleared by centrifugation (16000 g ...
-
bioRxiv - Developmental Biology 2024Quote: ... The hemolymph of 10 larvae each was collected with a 20 μl Microloader tip (Eppendorf, Hamburg, Germany) and placed on a slide with 7 μl of Vectashield mounting medium containing DAPI ...
-
bioRxiv - Microbiology 2024Quote: ... A clear lysate was obtained after centrifugation (16,000 x g, 10 min, 25 °C, Eppendorf 5415 centrifuge). Proteins in the lysate were processed for proteomics analysis following the E3 filter procedure described recently (64) ...
-
bioRxiv - Biophysics 2024Quote: ... The denatured HtrA1 was removed by centrifugation at 20,000 rpm for 10 minutes (Microcentrifuge 5430, Eppendorf, MA). The supernatant was passed through PD-10 Desalting Columns (Millipore Sigma ...
-
bioRxiv - Genomics 2020Quote: The ST slide with the tissue section was warmed to 37°C for 4 minutes on a thermal incubator (Eppendorf Thermomixer Option C, Germany) and in situ fixed and washed as described above ...
-
bioRxiv - Cell Biology 2020Quote: ... This isolation method included a penultimate centrifugation step in Eppendorf polypropylene conical tubes (10,000 x g for 30 min at 4°C, in Eppendorf rotor F-34-6-38) that allowed the removal/isolation of larger microvesicles ...
-
bioRxiv - Microbiology 2020Quote: ... The presumptive cultures were grown in TSBYE broth for 24 h at 30°C and centrifuged at 4°C (Eppendorf, 5810R, Auckland, New Zealand) at 3,220 × g for 10 min ...
-
bioRxiv - Biochemistry 2023Quote: ... 12,000 rpm was applied for 30 minutes at 4 °C to obtain the supernatant and then evaporated to obtain a dry metabolite pellet (Eppendorf Concentrator plus, Hamburg, Germany). For the NMR experiments ...
-
bioRxiv - Plant Biology 2022Quote: ... with incubation on ice for 1 h followed by centrifugation at 4 °C for 20 min at 20,000 g using an Eppendorf Centrifuge 5430R microcentrifuge (Eppendorf Canada Ltd, Mississauga, ON, Canada), supernatant combined and either used same day or stored at –80 °C.
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... a mixture of the antibody constructs with a 10-fold molar excess of DFO*-NCS (5 mg/mL in DMSO) (ABX, Radeberg, Germany) was incubated ON at 4 °C with gentle shaking (Eppendorf ThermoMixer, Merck, Darmstadt, Germany). The DFO*-derivatized constructs were purified by SE-HPLC under the same conditions as described above.