Labshake search
Citations for Eppendorf :
501 - 550 of 724 citations for tert Butyl trans 17 bromo 4 7 10 13 tetraoxa 15 heptadecenoate since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2024Quote: ... After The upper lipophilic phases and lower hydrophilic phases were separated by high-speed centrifugation (12,700 rpm, 5 min at 4 °C, Centrifuge 5430R, Eppendorf, Germany). Next ...
-
bioRxiv - Cancer Biology 2024Quote: ... extracts were centrifuged for 20 minutes at 18,000 x g (4°C) using a Eppendorf™ Centrifuge 5430 R (Eppendorf), to pellet out cellular debris ...
-
bioRxiv - Microbiology 2022Quote: ... Debris was pelleted for 10 min at 16,800 xg in a centrifuge (Eppendorf, CT, USA). The supernatant was titrated onto Vero E6 cells and after 1 hour overlaid with a 5% solution of methylcellulose in DMEM and incubated overnight ...
-
bioRxiv - Microbiology 2022Quote: ... 10 mM HEPES and seeded on confluent HFF monolayers in 8-well chamber slides (Eppendorf) at a density of 5×105 tachyzoites/well ...
-
bioRxiv - Microbiology 2022Quote: ... The beads and unbroken cells were pelleted by centrifugation (Eppendorf centrifuge, maximal speed, 10 min), and the aqueous phase was subjected to one phenol ...
-
bioRxiv - Developmental Biology 2022Quote: ... incubated for 10 minutes at 65C with shaking at 800rpm on a ThermoMixer C (Eppendorf). The SDS was neutralized with Triton X-100 and incubated at 37C for 10 minutes with gentle rocking ...
-
bioRxiv - Pathology 2020Quote: ... The homogenates were then centrifuged for 10 seconds in a bench top centrifuge (Eppendorf, USA) at 1500 relative centrifugal force at 4°C ...
-
bioRxiv - Microbiology 2023Quote: ... A second pre-culture of each species was centrifuged (10 min; 3,220g; Eppendorf Centrifuge 5810R) and re-suspended in each of four spent media at a starting concentration of 106 cell/mL ...
-
bioRxiv - Cancer Biology 2023Quote: ... and 40 mM chloroacetamide for 10 minutes at 95°C at 1000 rpm (Thermomixer, Eppendorf). 100 μg of protein were processed for proteomic analysis following the solid-phase-enhanced sample-preparation (SP3 ...
-
bioRxiv - Molecular Biology 2024Quote: ... followed by centrifugation for 10 min at 2000 x g (Eppendorf Centrifuge 5702, Hamburg, Germany). Serum was then aliquoted into 1 mL portions and frozen at -80°C until further analysis ...
-
bioRxiv - Biochemistry 2024Quote: ... They were subsequently centrifuged at 20,000 g for 10 min in a tabletop centrifuge (Eppendorf) and the pellet obtained was solubilized in Laemmli buffer ...
-
bioRxiv - Biochemistry 2024Quote: ... pH 8) and were heated at 95 °C for 10 mins with agitation (Thermomixer, Eppendorf). After heating ...
-
bioRxiv - Cancer Biology 2024Quote: ... and a micro manipulation system (mikromanipulator 5171 or InjectMan NI2 and 10 FemtoJet Express, Eppendorf) in semi-automatic mode ...
-
A DNA-based optical nanosensor for in vivo imaging of acetylcholine in the peripheral nervous systembioRxiv - Bioengineering 2020Quote: The DNA scaffold was self-assembled by incubating 5 DNA oligonucleotides following a temperature gradient from 95 °C to 4 °C for 6 h in a thermocycler (Mastercycler® nexus X2, Eppendorf) in Tris-EDTA buffer (TE buffer ...
-
bioRxiv - Microbiology 2021Quote: ... an aliquot of the culture was removed for CFU determination by plate counting and the remainder was centrifuged at 4°C and 3,100 rpm (Eppendorf Centrifuge 5415R) for 10 min to generate cell-free supernatants ...
-
bioRxiv - Neuroscience 2020Quote: ... 200 mM solution in water) was then added to the samples and incubated for 4 hours at 21°C in a ThermoMixer (Eppendorf AG). 4 µL of 1M IAA (iodoacetamide in water ...
-
bioRxiv - Microbiology 2021Quote: ... Serum was separated from blood by centrifugation at 8,000 RPM for 30 minutes at 4 °C in an Eppendorf 5424R centrifuge (Eppendorf, Enfield, CT). Serum was heat inactivated by incubating at 56 °C for 30 minutes ...
-
bioRxiv - Biophysics 2020Quote: 96 well plates were coated with immunized vaccine antigen and incubated for two hours at 25 °C (4 μg/mL, in 1xPBS, 50 μL/well) under constant shaking (300 rpm) on a MixMate thermomixer (Eppendorf, USA). ACE2-hFc protein coating was used as a control for antigen immobilization ...
-
bioRxiv - Biophysics 2020Quote: 96 well plates were coated with vaccine antigen and incubated overnight at 25 °C (4 μg/mL in 1x PBS, 50 μl/well) under constant shaking (300 rpm) on a MixMate thermomixer (Eppendorf, USA). Ovalbumin (4 μg/mL in 1x PBS ...
-
bioRxiv - Synthetic Biology 2020Quote: ... Solutions were then spun down at 13,000 RPM for 30 minutes at 4°C in a benchtop micro-centrifuge (Eppendorf Centrifuge 5424) to remove cells and other solid debris ...
-
bioRxiv - Microbiology 2020Quote: ... The cultures were grown in BHI broth for 24 h and were centrifuged at 3200 × g for 20 min at 4°C (Eppendorf, 5424R). The cell pellets were transported on ice for proteome analysis at The Mass Spectrometry Centre ...
-
bioRxiv - Bioengineering 2020Quote: ... Cotton swabs containing simulated forensic samples were placed in 500 μL of 1X PBS and mixed at 4°C in a Thermomixer (Eppendorf, Germany) set at 1,000 rpm for approximately an hour ...
-
bioRxiv - Bioengineering 2020Quote: ... and microbubbles were isolated by 4 centrifugation wash cycles at 40 relative centrifugation force for 1 min (Eppendorf 5804, Hamburg, Germany), where the infranatant was discarded and the microbubble concentrate was saved and resuspended.
-
bioRxiv - Biophysics 2023Quote: ... Centrifugation was used to fractionate the cell lysate (at 4 °C for 30 min at 4,416 g, Eppendorf, Centrifuge 5804 R) and at 4 °C for 1 hour for ultracentrifugation (70,658 g ...
-
bioRxiv - Biophysics 2023Quote: ... Lysate and cell fragments were separated by centrifugation at 4 °C for 20 min at 12,000 rpm (Centrifuge 5418 R, Eppendorf, Hamburg, Germany). Protein concentrations in the supernatant were determined using the Pierce Micro BCA Protein Assay kit (Thermo Fisher Scientific ...
-
bioRxiv - Developmental Biology 2023Quote: The filled needle is positioned on a micromanipulator (Narishige MMO-4) and connected to a positive pressure pump (Eppendorf FemtoJet 4i). Control embryos were injected with Cas9 protein and Lap2b-GFP mRNA only.
-
bioRxiv - Neuroscience 2022Quote: ... Blood samples were collected on ice and centrifuged within 1h at 4°C for 10min at 3000 RPM (Eppendorf, Centrifuge 5804R). Separated plasma was stored at -80°C until the protein assay was initiated.
-
bioRxiv - Neuroscience 2022Quote: ... and incubated (gentle agitation, 20 minutes, 4°C) in EDTA solution (20 mM EDTA-PBS, Ca/Mg-free) in LoBind Protein tubes (Eppendorf 0030122216). The specimen was shaken ...
-
bioRxiv - Microbiology 2024Quote: ... The stationary pre-cultures were then pooled and washed by centrifugation (5 min, 3,220 g and 4 °C) using a 5810 R swing-out centrifuge (Eppendorf, Hamburg, Germany). After centrifugation ...
-
bioRxiv - Microbiology 2024Quote: ... The crude EV fractions were prepared by ultracentrifugation (45,000 rpm, 1 h, 4°C; S50A rotor, Himac Ultracentrifuge CS100GXII; Eppendorf Himac Technologies) of the thus prepared supernatants.
-
bioRxiv - Neuroscience 2022Quote: ... 3 times with 10” ON and 30” OFF intervals on 20% power on ice and cleared by centrifugation at 21,000 rpm for 20min at 4°C (Eppendorf 5424R Centrifuge). 50µg of supernatant was mixed with NuPAGE LDS Sample Buffer (Thermo Scientific ...
-
bioRxiv - Plant Biology 2022Quote: ... annealing at 51 °C for 30 s and extension 72 °C for 30 s for 25 cycles by final extension 72 °C for 3 min and reaction hold at 4 °C in a thermocycler (Gradient thermocycler® Eppendorf). Amplified gene products were sequenced using the Sanger sequencing method ...
-
bioRxiv - Biochemistry 2023Quote: ... in 5% glucose solution v/v prior to adding 2X solubilization buffer and incubation at 37 °C for 4 hrs under gentle orbital agitation (500 rpm on Eppendorf Thermomixer). The product was then analyzed by SEC as described earlier.
-
bioRxiv - Developmental Biology 2022Quote: ... The filled needle is positioned on a micromanipulator (Narishige MMO-4) and connected to a positive pressure pump (Eppendorf FemtoJet 4i). Embryos are placed in FHM drops covered with mineral oil under Leica TL Led microscope ...
-
bioRxiv - Bioengineering 2023Quote: ... Cells were stained for 1 hour at a temperature of 4°C with shaking at 600 rpm in a Thermomixer comfort (Eppendorf, Germany). Stained cells were washed with ice cold FACS buffer twice before resuspension in FACS buffer for analysis ...
-
bioRxiv - Cell Biology 2024Quote: ... The protoplasts were collected by centrifugation at 1700 rpm for 1 minute using a swing-bucket rotor (Eppendorf S-4-72), washed with 15 mL of ice-cold solution 3 (26.4 g of ammonium sulfate ...
-
bioRxiv - Neuroscience 2024Quote: ... They were then resuspended to a concentration of ∼800-3000 nuclei per uL across 3-4 x twin.tec™ 96 Well LoBind PCR Plates (Eppendorf, 0030129512) in NSB ...
-
bioRxiv - Cancer Biology 2024Quote: ... The embryos were deyolked in ice cold Ringer’s solution using a micropipette tip and spun at 100 g for 2 min in a tabletop centrifuge at 4°C (Eppendorf, 5418R). The supernatant was discarded and the embryo bodies were trypsinized using TrypLE Express (Thermo Scientific ...
-
bioRxiv - Immunology 2022Quote: ... was added to the cells and they were incubated for 30 min at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). The liquid in the plate was removed using a vacuum manifold ...
-
bioRxiv - Immunology 2022Quote: ... 20 μL of mAb solution was added to the cells in the filter wells and the cells were incubated for 1 h at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). After the incubation ...
-
bioRxiv - Immunology 2022Quote: ... was added to the cells and they were incubated for 45 min at 4 °C and 750 RPM on a thermomixer (Eppendorf, ThermoMixer C). The liquid in the plate was removed using a vacuum manifold ...
-
bioRxiv - Immunology 2021Quote: ... The 80 µL aliquot was lyophilised for 4 h at 30 °C with the aid of a vacuum concentrator (Eppendorf Concentrator 5301) attached to a refrigerated condensation trap (Savant) ...
-
bioRxiv - Systems Biology 2021Quote: ... Total volume of 20 mL from each culture was transferred to a 50 mL Falcon® filled with ice and was immediately centrifuged at 3000 rpm for 3 min at 4 °C (Eppendorf centrifuge). Next the supernatant was discarded and the cell pellet was snap frozen into liquid nitrogen and stored at -80 °C ...
-
bioRxiv - Biophysics 2020Quote: ... 200 ml of M9 minimal media were added to 4 mL of pre-inoculum and the cell growth was monitored using Biophotometer D30 (Eppendorf, Hamburg, Germany) until the growth rate was 0.8 (OD at 600 nm) ...
-
bioRxiv - Biophysics 2021Quote: ... Samples of 20 μΜ N-NTD or N-NTD-SR consisting of varied protein:nucleic acid molar ratios (8:1, 4:1, 2:1, 1:1, 1:2) were prepared in low-binding microtubes (Eppendorf® LoBind) in the presence of 10% PEG-4000 (w/v ...
-
bioRxiv - Cell Biology 2020Quote: ... and the cells were pelleted by centrifugation at approximately 250 × g for 5 min at 4 °C (Eppendorf 5804 R, Hamburg, Germany). After resuspension ...
-
bioRxiv - Cell Biology 2021Quote: Live-cell microinjection experiments were performed using a FemtoJet® 4i microinjector in conjunction with an InjectMan® 4 micromanipulation device (Eppendorf). All microinjections were performed using pre-pulled Femtotips® injection capillaries (Eppendorf) ...
-
bioRxiv - Neuroscience 2023Quote: ... freshly laid embryos were aligned against nitrocellulose paper and injected using a quartz capillary needle, three-axis micromanipulator (Narishige, MMO-4) and microinjector (Eppendorf FemtoJet 4X).
-
bioRxiv - Microbiology 2023Quote: Liquid samples in 1 ml were collected and centrifuged for 20 min at 21 130 × g at 4°C (Centrifuge 5424 R; Eppendorf, Hamburg, Germany). The supernatants were used for chemical analyses by applying external standards for calibration and quality control ...
-
bioRxiv - Microbiology 2023Quote: ... We performed fragmentation of 4 µg DNA in a 46-µL elution volume in Covaris G-tubes by centrifuging at 4200–5000 rpm (Eppendorf 5424 centrifuge) for 90 s to achieve fragment sizes of ∼20 kb ...