Labshake search
Citations for Beckman :
401 - 450 of 1117 citations for Sulfur Free Cobalt Metallo Organic Standard Co @ 5000 µg g in Hydrocarbon Oil since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2022Quote: ... and centrifuged at 100 000 x g for 20 min using an Optima XPN-80 Ultracentrifuge (Beckman-Coulter). 70 μl of the supernatant were collected and the same volume of lysis buffer (8 M urea ...
-
Targeted attenuation of elevated histone marks at SNCA alleviates α-synuclein in Parkinson’s diseasebioRxiv - Neuroscience 2020Quote: ... The samples were then centrifuged at 107,163.6 X g for 2.5 hours at 4°C in an ultracentrifuge (XPN 100, Beckman Coulter). After centrifugation ...
-
bioRxiv - Microbiology 2021Quote: ... lysates were placed on top of a 20-50% sucrose gradient and sedimented at 35,000 rpm (218,000x g) for 6 hours at 4°C on SW40Ti rotor (Beckman). For flotation ...
-
bioRxiv - Cell Biology 2020Quote: ... the cleared supernatant was ultracentrifuged at 47,000 g for 2 hours at 4 °C using the JA25.50 rotor (Beckman). The virus was resuspended overnight in 180 μL D10 medium at 4 °C ...
-
bioRxiv - Cell Biology 2020Quote: ... and then centrifuged (300 g for 5 min. at 4 °C) (Allegra X-30R Centrifuge, Beckman Coulter, USA) to obtain the myofiber-associated cell pellet ...
-
bioRxiv - Biochemistry 2021Quote: ... and then centrifuging at 30,000 x g for 25 min at 4 °C in a JA 25.50 rotor (Beckman). GsI-IIC RT and other cellular proteins were then precipitated from the supernatant with 60% saturating ammonium sulfate ...
-
bioRxiv - Cell Biology 2020Quote: ... Gradients were centrifuged at 170 000 g for 1 hour in a SW41Ti swinging bucket rotor (Beckman Coulter) at 4 °C ...
-
bioRxiv - Cell Biology 2021Quote: ... supernatants were spun for 70 minutes at 200,000 × g and 4°C in an XPN-80 ultracentrifuge equipped with a Type 50.4 Ti rotor (Beckman Coulter ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... A brief centrifugation up to 4000 g (8 °C, manual stop when reaching 6000 RPM, Beckman JA-12) was used to separate chloroplast and mitochondrial fractions in pellet and supernatant respectively ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor ...
-
bioRxiv - Molecular Biology 2022Quote: ... The elutions were combined and centrifuged at 186,000 x g at 4 °C for 1.5 h in a (TLA-120.1) rotor (Beckman Coulter). Supernatant was discarded and the pellet was resuspended in the RNC buffer at a concentration of ~200 nM ...
-
bioRxiv - Biochemistry 2022Quote: ... Membrane contamination was removed by centrifugation 100,000 x g 1.25 hours 4°C in an NVT65.2 rotor (Beckman Coulter). The clarified supernatant was concentrated to 50 µl by ultrafiltration (Sartorius Vivaspin Turbo ...
-
bioRxiv - Molecular Biology 2022Quote: ... followed by centrifugation at 15,500 x g for 25 min in a JA 25.50 rotor in an Avanti J-E centrifuge (Beckman). The supernatant was transferred to a 50-mL conical tube ...
-
bioRxiv - Molecular Biology 2022Quote: ... Bacteria were harvested at 4,000 x g for 25 min in a JLA-8.1000 rotor in an Avanti J-E centrifuge (Beckman), and the pellet was transferred to a 50-mL conical tube (Sarstedt ...
-
bioRxiv - Microbiology 2022Quote: ... Two hundred μl of the ultracentrifuged preparation was applied on top of the gradients from where the samples were centrifuged at 35,000 rpm (151,263 x g) in a swing bucket rotor (41Ti, Beckman) for 70 min.
-
bioRxiv - Plant Biology 2022Quote: ... 330,000 x g / 60,000 RPM for 4.5 hours using a TY 70.1Ti rotor (Type 70.1 Ti Rotor, Beckman Coulter, USA) loaded into an Optima XE-100 Ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Neuroscience 2022Quote: ... EVs were washed and pelleted at 100,000 x g overnight in PBS containing 0.5% BSA in SW60 rotor (Beckman). EVs were stored in PBS with 0.5% BSA at -80 °C until use ...
-
bioRxiv - Microbiology 2022Quote: ... at 100,000 g for 24 h with an analytical fixed-angle rotor (50.3, Beckman Coulter, Fullerton, CA, USA). The amount of cholesterol and apolipoprotein A1 were determined enzymatically and by an immunoturbidimetric assay ...
-
bioRxiv - Microbiology 2024Quote: ... The eluent was ultracentrifuged (100,000 ×g, 4°C, 16 h) using Optima L-100 XP Ultracentrifuge (Beckman Coulter) to sediment ribosomes.
-
bioRxiv - Microbiology 2024Quote: ... and IAV was then pelleted through a 30% sucrose cushion at 112,400 ×g in a SW31Ti rotor (Beckman) for 90 min at 4°C ...
-
bioRxiv - Neuroscience 2024Quote: ... the samples were ultracentrifuged (4 °C for 60 min) at 100,000×g (Optima MAX Preparative Ultracentrifuge, Beckman Coulter). Supernatants ...
-
bioRxiv - Microbiology 2024Quote: ... it was concentrated by ultracentrifugation through OptiPrepTM Density Gradient Medium (D1556) at 154,000 g at 4℃ for 2.5 hours using a SW41Ti rotor (Beckman). The pelleted viral particles were suspended in 100 μL of PBS ...
-
bioRxiv - Neuroscience 2023Quote: EVs suspensions were pelleted by centrifugation at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman) and resuspended in 20 volumes (w/v ...
-
bioRxiv - Neuroscience 2023Quote: ... Fractions were diluted with 15 mL of cold PBS and centrifuged at 100,000 x g for 70 min at 4°C using a 70.1Ti rotor (Beckman). The supernatants were discarded and the pellets (containing EVs ...
-
bioRxiv - Microbiology 2022Quote: ... Sacculi were repeatedly washed with MilliQ water by ultracentrifugation at ∼540,000 x g for 15 min at 20 °C in a TLA-100.3 rotor (OptimaTM Max ultracentrifuge, Beckman) until completely removing SDS traces ...
-
bioRxiv - Microbiology 2023Quote: ... This OMV solution was then pelleted by ultracentrifugation at 100,000 x g for 3h at 4°C (Beckman Coulter Optima L-80 XP Ultracentrifuge ...
-
bioRxiv - Microbiology 2023Quote: ... The samples were finally centrifuged (5250 g, 10 min) in an Allegra X-15R centrifuge (Beckman Coulter, USA) using 96-well-filter plates (AcroPrep Advance 96-well 0.2 μm GHP 636 membrane filter plate ...
-
bioRxiv - Bioengineering 2023Quote: ... EVs were pelleted from conditioned media by spinning at ∼100,000 x g (29,500 rpm) for one hour in a SW32 Ti rotor (Beckman), and the supernatant was discarded ...
-
bioRxiv - Biophysics 2023Quote: ... The cells were further grown for 1.5-2.0 hours after induction and then harvested by centrifugation for 20 minutes at 1,529 g (Beckman, JA10) at 4 °C ...
-
bioRxiv - Genomics 2023Quote: ... Extracts were then centrifuged at 148,000 g for 2.5 hours at 4°C using the SW 28 Ti rotor (Beckman). Resulting pellet was resuspended overnight at 4°C in 1.5 ml of HBSS ...
-
bioRxiv - Microbiology 2023Quote: ... and IAV was then pelleted through a 30% sucrose cushion at 112,400 ×g in a SW31Ti rotor (Beckman) or an AH-629 rotor (ThermoFisher Scientific ...
-
bioRxiv - Biophysics 2023Quote: ... then harvested 72 hours post transfection by centrifugation at 15,970 g in a JLA 8.1 rotor (Beckman Coulter). Cell pellets were snap-frozen in liquid nitrogen and stored at −80°C until use.
-
bioRxiv - Biophysics 2023Quote: ... 1 mM DTT) and spun at 32,600 × g for 15 h at 4° in SW32 rotor (Beckman Coulter). Ribosome fractions were pooled as shown in Figure 2D ...
-
bioRxiv - Bioengineering 2023Quote: ... The gradients were then ultracentrifuged at 120,000 x g for 15 h using SW41 Ti rotor from Beckman Coulter ...
-
bioRxiv - Cell Biology 2023Quote: ... The fraction containing TpPyShell was further concentrated by centrifugation (4000 g, 15 min, 4°C, SX4400 rotor; Beckman) with Amicon Ultra (M.W.4000 ...
-
bioRxiv - Developmental Biology 2023Quote: ... Peptide supernatant was cleared by ultracentrifugation at 100,000□g for 1 hour at 4□°C (Beckman Coulter, 343775), then vacuum-dried overnight.
-
bioRxiv - Biochemistry 2023Quote: ... Membrane fractions were isolated by ultracentrifugation at 40,000 x g in a type 45 Ti rotor (Beckman Coulter). Membrane fractions were further homogenised and washed twice with high-salt buffer (10 mM HEPES pH 7.5 ...
-
bioRxiv - Biophysics 2023Quote: ... the supernatant was layered onto PBS/1.5 M sucrose solution in sample/sucrose 4:1 ratio and ultracentrifuged at 264,000 × g on Optima TLA 100.3 ultracentrifuge (Beckman for 2 h at 4°C ...
-
bioRxiv - Biophysics 2024Quote: ... cell pellet was harvested by centrifugation at 4,550 g for 30 min using a JS-4.2 (Beckman Coulter). For protein purification ...
-
bioRxiv - Biochemistry 2024Quote: The frozen cells were thawed and disrupted using a high-pressure cell crusher and centrifuged at 23,376 ×g (JA-14.50 rotor, Beckman) for 1 h at 4 °C ...
-
bioRxiv - Biochemistry 2024Quote: The frozen cells were thawed and disrupted using a high-pressure cell crusher and centrifuged at 23,376 ×g (JA-14.50 rotor, Beckman) for 1 h at 4 °C ...
-
bioRxiv - Pathology 2024Quote: ... and the actin-rich extracts were combined and subjected to centrifugation at 18,000× g by rotor JA-25.5 (Beckman). Afterward ...
-
bioRxiv - Pathology 2024Quote: ... We then applied the dialyzed actin to centrifugation at 167,000× g for 2.5 h with rotor SW55 Ti (Beckman) at 4°C ...
-
bioRxiv - Cell Biology 2024Quote: ... and the resultant supernatants were ultracentrifuged at 110,000 × g using a Fixed-Angle Rotor TLA55 (Beckman Coulter, 366725) followed by washing of the exosome pellets with phosphate-buffered saline (PBS) ...
-
bioRxiv - Neuroscience 2024Quote: ... and 18 ml 1.3 M sucrose / 20 mM Tris/HCl (pH 7.4) and subjected to ultracentrifugation (180,000 x g, for 30 min, SW-32, Beckman). The membrane phase between the two sucrose layers was harvested and diluted with 20 mM Tris/HCl (pH 7.4 ...
-
bioRxiv - Microbiology 2024Quote: ... soluble supernatant fractions were obtained (as described above) and ultracentrifuged at 210,000 x g (Type 70Ti Rotor, Beckman) to pellet membranes ...
-
bioRxiv - Neuroscience 2024Quote: ... The cortical homogenates containing the crude tubulin were centrifuged at 50,000 x g (Beckman Coulter, Optima Max-XP) for 30 minutes at 4 °C to yield a supernatant ...
-
bioRxiv - Immunology 2024Quote: ... and 20% OptiPrep density gradient at 100,000 × g overnight and at 4 °C (SW 40 Ti, Beckman Coulter). The following day ...
-
bioRxiv - Genomics 2024Quote: ... by centrifuging the chip facing downwards at 3,220 g for 5 min at 4 °C and purified with 1.5 × Ampure XP beads (Beckman), followed by DNA QC and trace checking.
-
bioRxiv - Cancer Biology 2024Quote: ... followed by ultracentrifugation at 100,000 g for 90 min at 4°C (45Ti or TLA110 rotors, Beckman Coulter). The pellet containing EVs was washed in cold 1x PBS (Gibco ...