Labshake search
Citations for Beckman :
251 - 300 of 2271 citations for 5R 3 4 5 6 Tetrahydro 5 phenyl N benzyloxycarbonyl 4 H 1 4 oxazin 2 one since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2021Quote: ... Hettich) at 4°C and then centrifuged at 40000 rpm for 4h30 at 4°C using SW41Ti rotor (Beckman). The supernatant was then UV inactivated at a wavelength of 254 nm for 4 min (3 times ...
-
bioRxiv - Genetics 2024Quote: ... and spun at 70,000 rpm for 4 hours at 4°C using a TLA 100.3 Rotor in an Optima Ultracentrifuge (Beckman, 361889). After centrifugation ...
-
bioRxiv - Microbiology 2024Quote: ... and the remainder was then loaded onto a 20%-60% sucrose cushion and centrifuged at 25,000 rpm at 4°C for another 4 hours using the SW41 rotor (Beckman). The initial 5 μL sample and each sucrose gradient layer were then absorbed ...
-
bioRxiv - Neuroscience 2022Quote: ... The samples were then spun at 31000 x g (18468 rpm) for 5 min at 4°C in a fixed-angle rotor (50.2 Ti rotor in Beckman Coulter Optima L-100 XP) with slow brake ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were centrifuged at 35,000 rpm for 3 hours at 4°C (SW41 Ti rotor; Beckman) and subsequently fractionated using a Piston Gradient Fractionator (Biocomp instruments ...
-
bioRxiv - Biophysics 2022Quote: ... The sample was loaded on top of the glycerol gradient and centrifuged at 4°C for 18 h at a speed of 35,000 rpm in SW-41Ti rotor (Beckman). Fractions of 500 μL were collected ...
-
bioRxiv - Biophysics 2021Quote: ... sucrose density gradients and centrifuged at 24,000 × rpm (102,170 × g) for 18 h at 4°C (Sw40Ti rotor, Beckman Coulter). The fractions of the sucrose gradient were applied to SDS-PAGE ...
-
bioRxiv - Microbiology 2020Quote: ... The gradient was centrifuged for 17 h at 4°C and 100,000 rcf (23,700 rpm) using an SW 40 Ti rotor (Beckman Coulter), followed by manual fractionation into 20 590 μl fractions and measurement of the A260 nm of each fraction ...
-
bioRxiv - Biochemistry 2022Quote: ... 5 mM MgCl 2 and 2 mM DTT and centrifuged at 70,000 x g for 20.5 h at 4 °C in an SW28 rotor (Beckman Coulter). Fractions corresponding to the 40S peak were collected ...
-
bioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 42,800 x g for 15 h at 4 °C in an SW28 rotor (Beckman Coulter). Fractions of 1 mL were collected using an AKTA system (Cytiva) ...
-
bioRxiv - Neuroscience 2020Quote: ... The gradient was centrifuged at 200,000 × g for 20 h at 4°C (35,000 rpm with # Optima-XE SW41 Beckman Coulter). The gradient was collected in 2-mL fractions ...
-
bioRxiv - Biochemistry 2021Quote: ... Eluted fractions were pooled and subjected to a 2.5 h ultracentrifugation at 135,500 x g at 4 °C using a TLA-55 rotor (Beckman-Coulter). Finally ...
-
bioRxiv - Cancer Biology 2020Quote: ... Lysates were loaded on 15-50% sucrose gradient and centrifuged at 35,000 rpm for 2.5 h at 4°C in a SW41 rotor (Beckman Coulter). Polysomes were separated through a live optical density (OD ...
-
bioRxiv - Molecular Biology 2020Quote: ... Ten OD260 units were loaded on a 10–50% sucrose gradient and centrifuged at 187,813 × g for 2.75 h at 4 °C in a SW41Ti rotor (Beckman Coulter). The fractions of the gradient were collected ...
-
bioRxiv - Biochemistry 2021Quote: ... and 10 mM NH4Cl) and centrifuged for 16 h at 4°C with 18,000 rpm in an SW60Ti rotor (Beckman). Gradients were hand-fractionated and ribosome concentrations were determined by absorbance at 260 nm (A260 ...
-
bioRxiv - Microbiology 2022Quote: ... The gradient was centrifuged at 4°C and 35,000 rpm for 2.5 h using an SW 40 Ti rotor (Beckman Coulter). Afterward ...
-
bioRxiv - Neuroscience 2023Quote: ... The prepared gradients were centrifuged at 200,000 x g for 16 h at 4°C in an SW41Ti rotor (Beckman), with no braking during deceleration ...
-
bioRxiv - Plant Biology 2023Quote: ... Approximately 250 µl of crude EV sample resuspended in 20 mM Tris-HCl pH 6.0 was slowly dispensed on top of the column and centrifuged at 100,000 x g for 17 h at 4 ⁰C (SW 41 Ti rotor, Beckman Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and the pellet was resuspended in 25 ∝l lysis buffer ...
-
bioRxiv - Immunology 2023Quote: ... and then centrifuged at 260,800 x g for 2.5 h at 4°C in an Optima L-100XP ultracentrifuge (Beckman–Coulter) using the SW41Ti rotor with brake ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 200,000 x g for 2.5 h (high g) at 4°C in a TLA-100.3 fixed angle rotor (k-factor 14) (Beckman Coulter) and Red-C12 fluorescence of the starting material ...
-
bioRxiv - Cell Biology 2023Quote: ... of proteins were applied on the top of a 16 ml 10-30% continuous sucrose density gradient and centrifuged at 74,400 g for 15 h at 4 °C (SW 32.1 Ti; Beckman Coulter). 24 equal volume fractions were collected ...
-
bioRxiv - Molecular Biology 2023Quote: ... Small extracellular vesicles were pelleted at 100,000 X g for 1,5 h at 4°C by using Ti-45 rotor (Beckman Coulter) and 70 ml polycarbonate bottles (Beckman Coulter ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pellets were pooled in 1 ml PBS and centrifuged at 100,000 X g for 1,5 h at 4°C in 1,5 ml tubes in a Ti-45 rotor (Beckman Coulter) using adapters (#11004 ...
-
bioRxiv - Cell Biology 2024Quote: ... Solutions of 15% and 23% Optiprep were layered on top or below the sample and centrifuged at 4°C for 16 h at 120,000g in a SW 28 Ti swinging bucket rotor (Beckman).
-
bioRxiv - Cell Biology 2024Quote: ... The gradients were centrifuged at 39,000 rpm for 2.5 h at 4°C using a SW41Ti rotor (Beckman Instruments), and 21 fractions of 0.5 ml were collected ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Ribosomes were pelleted by centrifugation at 27,000 rpm (57,000 xg) for 16 h at 4 °C in a Ti-45 rotor (Beckman-Coulter). Ribosomes pellets were then resuspended in dissociation buffer (20 mM Tris-HCl pH 7.5 ...
-
bioRxiv - Biophysics 2023Quote: ... Cell debris was removed by centrifugation at 20,000 rpm at 4°C for 1 h (Avanti® J-E centrifuge from Beckman Coulter, rotor: JLA 25.50). The supernatant was collected and loaded onto a pre-equilibrated 5 ml His-Trap FF crude column ...
-
bioRxiv - Biochemistry 2020Quote: ... which were centrifuged at 50,000rpm for 4 hours at 4°C using a TLS55 rotor and an Optima MAX-XP Ultracentrifuge (Beckman Coulter). The sample was physically fractionated into 10 fractions of 85 uL each ...
-
bioRxiv - Molecular Biology 2022Quote: ... 800 µl of EDTA-treated lysate was layered on top of the sucrose gradient and ultracentrifuged at 35000 rpm for 4 hours at 4 °C in a SW41Ti rotor (Beckman). After centrifugation ...
-
bioRxiv - Cell Biology 2020Quote: ... 4°C in a TLA 100.3 rotor (Beckman). P13 ...
-
bioRxiv - Cell Biology 2022Quote: ... 4°C (Type 45 Ti rotor, Beckman Coulter) for 30 min to collect supernatant ...
-
bioRxiv - Biochemistry 2020Quote: ... 4 °C (Beckman Coulter Optima LE-80K Ultracentrifuge). The clarified lysate was placed in a beaker on a stir plate at 4 °C and concentrated ammonium sulfate (5 mM HEPES pH 7.5 ...
-
bioRxiv - Biochemistry 2022Quote: ... 4 °C on a Sorvall WX90 ultracentrifuge (Beckman) with SW55Ti rotor ...
-
bioRxiv - Molecular Biology 2022Quote: ... 4°C in SW-41Ti rotor (Beckman Coulter). Subsequently ...
-
bioRxiv - Biochemistry 2022Quote: ... 4°C using a SW41Ti rotor (Beckman Coulter). A BioComp fractionator was used to collect fractions 1 – 16 ...
-
bioRxiv - Neuroscience 2022Quote: ... at 4°C in a Beckman ultracentrifuge (Beckman). After centrifugation ...
-
bioRxiv - Systems Biology 2022Quote: A particle size analyzer (Multisizer 4, Beckman Coulter) was used to count the number of cells ...
-
bioRxiv - Microbiology 2024Quote: ... 4 °C (Beckman Coulter, JA 25-50 rotor) for 10 min ...
-
bioRxiv - Microbiology 2024Quote: ... 4°C (Beckman Coulter, JA 25-50 rotor) for 10 min and the cell lysates were incubated with 1 mL of prewashed Ni-NTA Agarose beads (QIAGEN ...
-
bioRxiv - Immunology 2021Quote: Cells were analyzed using 4-to 6-color direct immunofluorescence staining on a Cytoflex LX or S (Beckman Coulter) flow cytometer ...
-
bioRxiv - Cancer Biology 2021Quote: ... Libraries were further amplified 4–6 PCR cycles as described [43] and purified using AMPure XP beads (Beckman Coulter). ATAC-seq libraries were subsequently sequenced 2 x 75 bp on an Illumina NextSeq500.
-
bioRxiv - Microbiology 2022Quote: ... The gradient was spun at 45,000 rpm (~200,000 x g) for 6 hours at 4 °C in a SW60Ti rotor (Beckman Coulter). Successive 0.4 mL fractions were collected by pipetting and their densities measured ...
-
bioRxiv - Cell Biology 2024Quote: ... 36 mL of media per condition was subject to ultracentrifugation at 100,000 x g for 6 hours at 4 °C in a SW-32-Ti swinging bucket rotor (Beckman). The media was decanted and 500 μL PBS was added to the pellet and left to resuspend overnight at 4 °C ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples were centrifuged at 135,000 × g for 1 hr at 4°C (Beckman OptimaTM Max centrifuge ...
-
bioRxiv - Cell Biology 2022Quote: ... and the post-nuclear supernatant was loaded onto an 8-step discontinuous sucrose density gradient (HEPES-buffered 0.2–2 M sucrose) and centrifuged at 55,000 rpm for 2h at 4 °C using an MLS50 rotor (Beckman Coulter). Extracellular acidification rate (ECAR ...
-
bioRxiv - Immunology 2021Quote: ... were incubated with monoclonal antibodies at 4°C for 30 min and then fixed with 4% paraformaldehyde before analysis on a Cytoflex cytometer (Beckman Coulter). Data were analyzed by Flow Jo software v.10.7 (BD Biosciences) ...
-
bioRxiv - Molecular Biology 2024Quote: ... They were cherrypicked from the original library plates and 4 crRNAs per target were pooled (4 x10 μl) and re-arrayed using a Biomek-FX automated pipetting system (Beckman Coulter). Edit-R CRISPR-Cas9 Synthetic tracrRNA (Horizon Discovery Biosciences ...
-
bioRxiv - Microbiology 2021Quote: ... The outer membrane vesicles (OMVs) were then isolated by ultracentrifugation (140 000xg, 4°C) for 3 hours (Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... Gradients were centrifuged at 35K rpm for 3 hrs at 4°C in a SW-41Ti rotor (Beckman) with maximum acceleration and no brake using a Beckman Optima L-90 Ultracentrifuge ...