Labshake search
Citations for Beckman :
1051 - 1100 of 1869 citations for 2E 4E 2 4 Octadien 1 ol since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Systems Biology 2020Quote: ... the 500xg supernatant was first spun at 10,000xg for 10 minutes at 4°C (Beckman Coulter, fixed angle rotor TLA 120.2) in 1 ml 11×34 mm polycarbonate uncapped centrifuge tubes (Beckman Coulter 343778) ...
-
bioRxiv - Systems Biology 2020Quote: ... and underwent ultracentrifugation at 100,000xg for 40 minutes at 4°C (rotor MLA-55; Beckman Coulter 355603 10.4 ml capped tubes). Supernatant was discarded from each fraction ...
-
bioRxiv - Biophysics 2021Quote: The aggregation products formed in Eppendorf tubes under agitation conditions at pH 3 and pH 4 were centrifuged using an Optima MAX-XP ultracentrifuge (Beckman Coulter) in a TLA-55 rotor at 40,000 rpm at 20°C for 45 min ...
-
bioRxiv - Cell Biology 2020Quote: ... 50 µl of alkaline carbonate treated mitochondria were set aside as input (kept on ice) and 50 µl were centrifuged at 100 000g for 30 min at 4°C in TLA100 rotor (Beckman Coulter). Pellet was gently washed with ice-cold sodium carbonate buffer and resuspended in 20 µl of 1x Laemmli loading buffer ...
-
bioRxiv - Immunology 2020Quote: ... during 30min and then transferred into a DuraClone IF T Helper cell tube (CD3, CD4, IL-4, IL-17A, IFNγ) (Beckman Coulter), using the IntraPrep fixation permeabilization kit (Beckman Coulter) ...
-
bioRxiv - Molecular Biology 2021Quote: ... The samples were then separated into membrane and matrix fractions by ultracentrifugation at 100 000 g (TLA 110 rotor) for 30 min at 4°C in OptimaTM TLX table-top ultracentrifuge (Beckman-Coulter). The supernatant fraction was transferred to new tube ...
-
bioRxiv - Bioengineering 2022Quote: ... Cells were subsequently incubated with 2.5×103 CFSE-RJ-EVs per cell for 4 hours and analyzed with flow cytometry (CyAn ADP, Beckman Coulter, US). Treatment groups were compared to unstained control as well as CFSE-RJ-EVs without inhibitor ...
-
bioRxiv - Cell Biology 2022Quote: Whole bovine milk samples (200 mL) were centrifuged at 3,000 x g for 15 min at 4°C (Allegra X-15R, Beckman Coulter, France) to separate the fat from the skimmed milk ...
-
bioRxiv - Cell Biology 2022Quote: ... After ultracentrifugation at 200,000 x g for 5 h at 4°C (SW55Ti rotor in a XL-90 Beckman Coulter centrifuge), fractions containing purified EVs or purified phages were extracted from the top following the scheme in Supp ...
-
bioRxiv - Biochemistry 2022Quote: ... Soluble and insoluble fractions were isolated via centrifugation (90,000 x g, 30 min, 4 °C) in an Optima™ MAX-OP (Beckman Coulter) centrifuge using the TLA-100.3 rotor ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was recovered and centrifuged at 60,000 rpm for 15 min at 4°C in an Optima TL micro-ultracentrifuges (TLA 100.3 rotor Beckman Coulter, Fullerton, CA) to obtain the Golgi-enriched p100 pellet fraction ...
-
bioRxiv - Physiology 2022Quote: ... 40 ml of filtrates were ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 x g for 70 min at 4°C using an Optima L-100 XP Ultracentrifuge equipped with 90 Ti Fixed-Angle Titanium Rotor (Beckman Coulter). The final EVs pellets were suspended in 200 µl of PBS (Lonza) ...
-
bioRxiv - Microbiology 2022Quote: ... respectively) by centrifugation at 4000 × rpm for 10 min at 4 °C using an Allegra® X-15R centrifuge (Beckman Coulter) and flash-frozen in liquid nitrogen before RNA isolation ...
-
bioRxiv - Neuroscience 2022Quote: ... The discontinuous sucrose gradient was centrifuged at 242K g for 47 min at 4 °C in a vertical rotor (VTi50 rotor, Beckman Coulter). The bulk GC fraction (GCF ...
-
bioRxiv - Microbiology 2022Quote: ... Lysates were then submitted to centrifugation at 100,000 g for 45 min at 4°C in an Ultracentrifuge Beckman XL-90 (Beckman France, Villepinte) equipped with a 70.1T1 rotor ...
-
bioRxiv - Biophysics 2024Quote: ... The virions were harvested from the supernatant by centrifugation through 1.5ml of 30% sucrose at 10,000 RPM at 4°C for 2hrs (Beckman L8-70M Ultracentrifuge). The resulting pellet of virions was resuspended in 20ul of RIPA lysis buffer containing protease inhibitors.
-
bioRxiv - Neuroscience 2024Quote: ... The same mass of total extracts was taken for a high spin at 154,000 g for 20 minutes in 4 °C using an ultracentrifuge (Beckman, TLX-120K) to obtain the supernatant soluble fraction (S1 ...
-
bioRxiv - Neuroscience 2024Quote: ... and centrifuged at ∼14.000 x g max (∼10900 x g average) for 22 min at 4 °C (Beckman Coulter, MAX-XP). After centrifugation ...
-
bioRxiv - Molecular Biology 2024Quote: ... for ultracentrifugation at 100,000 rcf for 70 min at 4 °C using a Optima XE-90 ultracentrifuge with a SW 32 Ti rotor (Beckman Coulter). The EV pellet was resuspended in 0.22 μm-filtered sterile PBS and freshly-used or stored at −80 °C until further use ...
-
bioRxiv - Microbiology 2024Quote: ... Most of the supernatant was discarded leaving 12x∼200 µL of concentrated broken pieces of genomic fiber that were pooled and layered on top of ultracentrifuge tubes of 4 mL (polypropylene centrifuge tubes, Beckman Coulter) containing a discontinuous cesium chloride gradient (1.4 ...
-
bioRxiv - Cancer Biology 2024Quote: ... CRC cells were then cocultured at a 1:1 ratio with BMDCs for 4 hours and analyzed for uptake of CRC DNA by flow cytometry on the CytoFlex S cytometer (Beckman Coulter). Analysis was performed in FlowJo.
-
bioRxiv - Bioengineering 2023Quote: ... Samples were ultracentrifuged at 100,000×g for 70 min at 4°C using the Beckman OptimaTM L-80 XP ultracentrifuge (Beckman Coulter, CA). The supernatant was discarded ...
-
bioRxiv - Physiology 2023Quote: ... was ultracentrifuged twice in sterile 10.4 mL polycarbonate bottles at 100 000 × g for 70 min at 4°C (Optima L-100 XP Ultracentrifuge, 90 Ti Fixed-Angle Titanium Rotor; Beckman Coulter). The final EV pellet was suspended in 50 µl of PBS without Ca2+ and Mg2+ (Lonza ...
-
bioRxiv - Neuroscience 2023Quote: ... Supernatant were loaded on top of a discontinuous 0.75/1.0/2.33 M sucrose density gradient and centrifuge at 242,000 x g for 60 min at 4°C (Beckman SWTi41 swing rotor). The growth cone depleted fraction was collected between 0.75 M and 1.0 M sucrose ...
-
bioRxiv - Cell Biology 2023Quote: ... The cilia in the upper phase were sedimented by centrifugation (27,000 g, 4°C, 20 min; Beckman Coulter, Avanti JXN-26) and resuspended in Hepes-Magnesium-EGTA-Potassium (HMEK ...
-
bioRxiv - Biochemistry 2023Quote: ... The sample was run on the gradient for 16 hrs at 4 °C using an Optima XE-90 ultracentrifuge (SW40Ti rotor, Beckman-Coulter) at 30,000 rpm ...
-
bioRxiv - Cell Biology 2023Quote: ... and ultracentrifuged at 200,000 × g for 4 hours using a SW 55 Ti rotor in a Beckman OPTIMA90X ultracentrifuge (Beckman Coulter, USA). Finally ...
-
bioRxiv - Biophysics 2023Quote: ... the SWCNT suspension was centrifuged at 30000 rpm (164 000 x g) for 4 h at 25 °C (Optima XPN-80, Beckman Coulter) to remove any remaining nanotube aggregates.
-
bioRxiv - Genomics 2023Quote: ... cellular/protein debris were then collected by centrifugation at 1,000xg for 15 minutes at 4°C (Beckman Coulter Allegra X-14R), and the supernatant (DNA ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were separated from protein aggregates and free reagents by bottom-up density gradient centrifugation in sucrose for 17.30 h at 192,000 g and 4°C using a SW40 rotor (k-factor 144.5; Beckman Coulter, Fullerton, California, USA). Twelve fractions of 1 mL were then collected from the top of the gradient and respective densities were determined by refractometry using an Atago Illuminator (Japan) ...
-
bioRxiv - Cancer Biology 2023Quote: ... and centrifuged at 100,000 x g either for 4 hr (hollow fiber bioreactor) or overnight (2D flask culture) in a SW32 rotor (Beckman Coulter). For the preparation of the density gradient ...
-
bioRxiv - Plant Biology 2023Quote: ... The cAW was collected by spinning at 700 x g for 20 min at 4 ⁰C (JA-14 rotor, Beckman Coulter; Avanti J-20TM centrifuge, Beckman Coulter). vAW was filtered through a single layer of Miracloth and was combined with the cAW ...
-
bioRxiv - Microbiology 2023Quote: ... The normalized cultures were then centrifuged at 5030 x g and 4°C for 20 minutes on an Avanti J-26 XPI (Beckman-Coulter) centrifuge (JS 5.3 rotor) ...
-
bioRxiv - Biochemistry 2023Quote: ... Mitochondrial crude was pelleted by centrifugation at 9500 ×g (4 °C, 15 min) using the Optima XE-90 Ultracentrifuge with a Ti-45 rotor (Beckman Coulter). The final pellet was resuspended in 2 mL of Resuspension buffer (250 mM sucrose ...
-
bioRxiv - Biochemistry 2023Quote: ... then centrifuged at 27,000 gmax for 15 min at 4°C (Optima XPN-100 Ultracentrifuge, Beckman Coulter, with SW60 Ti rotor). Resuspension of the pellet (sub-mitochondrial particles ...
-
bioRxiv - Cancer Biology 2024Quote: ... cells were resuspended in 100µL of PBS and stored at 4°C in the dark until samples were analyzed on a CytoFLEX LX Flow Cytometer (Beckman Coulter). Data was analyzed using FlowJo® software.
-
bioRxiv - Bioengineering 2024Quote: ... we first measured a cell line population in PBS suspension using a coulter counter (Beckman Coulter Multisizer 4, 100 μm aperture) to obtain a cell volume distribution with the standard unit ...
-
bioRxiv - Cell Biology 2024Quote: ... We loaded 2 mL of the homogenate mixture on top of a 3.92 ml 62% sucrose in MAB cushion in an Ultra-Clear 5/8” X 4” Beckman Coulter tube (344061, Beckman Coulter). We added the remaining sucrose in MAB solutions ...
-
bioRxiv - Microbiology 2024Quote: ... Samples were balanced and centrifuged at 42,000 rpm for 35m at 4°C in a SW55Ti rotor and buckets with tube adaptors (Beckman REF: 356860). The supernatant was then concentrated to 80μl by spinning through Amicon 3kDa MWCO concentrator units at 14,000xg for 15-30m at 4°C ...
-
bioRxiv - Microbiology 2024Quote: ... and resolved by ultracentrifugation at 36,000 rpm for 3 h at 4°C with the fastest braking in Optima XPN-80 Ultracentrifuge equipped with SW-41Ti rotor (Beckman Coulter). Gradients were fractionated (0.5 mL/fraction ...
-
bioRxiv - Plant Biology 2024Quote: ... The tubes were then centrifuged for 20 min at 700 x g with slow acceleration at 4°C using a JA-14 rotor (Avanti J-20 XP centrifuge; Beckman Coulter). The resulting apoplastic wash collected was passed through a 0.22 µm membrane filter to remove bacteria and larger debris ...
-
bioRxiv - Microbiology 2024Quote: Bacterial isolates were grown overnight on LB agar and DNA extraction was performed using the GenFind v3 gDNA extraction kit according to standard protocol (Supp. Table 4) (Beckman Coulter). For the mock microbial community ...
-
bioRxiv - Microbiology 2024Quote: ... This sample was then ultracentrifuged at 150,000 g for 2.5 h at 4 °C using a Type 70 Ti or Type 45 Ti rotor in an Optima XE Ultracentrifuge (Beckman Coulter). The translucent VLP pellet formed by this process was resuspended in 200 μl PBS buffer ...
-
bioRxiv - Immunology 2024Quote: ... Centrifugation was performed (30 min, 800 g, 4 °C) in a swinging bucket on a Beckman Coulter JS-13.1 rotor (Beckman Coulter, USA). Hemocytes concentrated at each density interface were collected separately with a 70 mm long 20Gx2.75” needle mounted on a 1 mL syringe ...
-
bioRxiv - Molecular Biology 2024Quote: ... The obtained culture was pelleted at low speed (7000 rpm for 10 minutes at 4 0C in a Beckman Coulter centrifuge). Harvested cells were resuspended (1 g of cell pellet per 10 mL ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... The total number of microglia (CD11b+ CD45+ cells) in the L3/4 spinal cord or SDH was analyzed using CytoFLEX SRT (Beckman Coulter) and FlowJo software (TreeStar) ...
-
bioRxiv - Molecular Biology 2024Quote: ... The tube was centrifuged at 38,000 x g for 21-24 h at 4°C using the SW40T1 rotor in the Optima L-60+ Ultracentrifuge (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Neuroscience 2024Quote: ... The combined supernatants were centrifuged at 100,000 g for 40 min (4°C) on a TL110 rotor (Beckman Coulter, Paris, France) and the pellet was suspended in the same buffer ...
-
bioRxiv - Biochemistry 2024Quote: ... After centrifugation at 60,000 x g for 20 min at 4°C in a swing-out rotor (MLS-50, Optima Max-XP, Beckman Coulter), the mitochondrial fraction localized in the interphase between the two sucrose layers was carefully removed with a syringe ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were centrifuged at 4°C for 24 h at 274,400 x g in a SW-40Ti rotor (Beckman Coulter Inc.). To remove KBr ...