Labshake search
Citations for Bio-Rad :
301 - 350 of 3384 citations for Pops Hrms Hch Clean Up Spike 13C6 99% 50X Stock 1 Ug Ml In Nonane since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Genetics 2023Quote: ... 1 ml 2xYNB with 2% glucose was added to the sorted cells in sheath fluid (PBS, BioRad #12012932) and they were transferred to a shaking incubator and grown at 30 °C ...
-
bioRxiv - Biochemistry 2024Quote: ... the supernatant was loaded onto a 1 ml HisTrap (Cytiva) column connected to NGC Quest 10 (Bio-Rad), previously equilibrated with Buffer A (25 mM Tris–HCl pH 8.0 ...
-
bioRxiv - Biophysics 2022Quote: ... Nanodisc reconstitution was induced by removing detergent with 0.8 mg ml-1 pre-washed Biobeads SM-2 (Bio-Rad) for 2 hours with gentle agitation at RT ...
-
bioRxiv - Molecular Biology 2020Quote: ... the complexes were bound to 1 ml of the appropriate resin in a poly-prep chromatography column (Bio-Rad) and the resin was washed extensively with buffer ...
-
bioRxiv - Biochemistry 2020Quote: ... The reconstitution sample was nutated for 1 h at 4°C before addition of 0.2 g/mL SM2-BioBeads (BioRad), and the reconstitution sample was further nutated overnight at 4°C before removal of the biobeads ...
-
bioRxiv - Cancer Biology 2021Quote: ... Lysates prepared at a concentration of 1 mg/ml and supplemented with 4x Laemmli Sample Buffer (Bio-Rad: 1610747) supplemented with fresh 2-mercaptoethanol (Sigma ...
-
bioRxiv - Molecular Biology 2020Quote: ... the complexes were bound to 1 ml of the Amylose resin in a poly-prep chromatography column (Bio-Rad) and the resin was washed extensively ...
-
bioRxiv - Microbiology 2022Quote: ... A 15% SDS-Tricine gel was made by mixing: 2.5 mL 30% acrylamide/Bis solution 37.5:1 (BioRad #1610158), 1.25 mL gel buffer (1.5 M Tris-HCl ...
-
bioRxiv - Molecular Biology 2023Quote: ... and the supernatant was normalized to 1 mg/mL using 0.1% Azo buffer by the Bradford assay (Bio-Rad). Samples were reduced with 30 mM DTT for 1 h and subsequently alkylated with 30 mM iodoacetamide for 1 h ...
-
bioRxiv - Genetics 2023Quote: ... followed by purification and size selection on 1% agarose gel with .6 µg/mL ethidium bromide (BioRad Cat#1610433), selecting for the 7,961 bp band ...
-
bioRxiv - Cell Biology 2023Quote: ... Cells were blocked for 1hr in PBS with 1mg/ml and 0.1% triton and then stained overnight with anti-alpha Tubulin antibody (1:100, MCA78G, BioRad). Cells were then washed ...
-
bioRxiv - Molecular Biology 2024Quote: 0.2 – 1 mL (sufficient to cover the sample) of 5% Chelex 100 Resin (Bio-Rad Laboratories, Hercules, CA, USA) with 0.2% Tween20 and 0.1 mg/mL proteinase K (Merck ...
-
bioRxiv - Cell Biology 2020Quote: ... Cells were co-encapsulated with Drop-Seq beads (ChemGenes: lot 083117) in 1 nL droplets using 15000 mL/hr oil (QX200, Biorad), 4000 mL/hr cell suspension and 4000 mL/hr bead flow rates (droplet generation frequency 2 kHz) ...
-
bioRxiv - Microbiology 2021Quote: ... Gel was stained for 1 h with 0.1 μg/ml ethidium bromide and visualized by ChemiDoc MP Imaging System (Bio-Rad).
-
bioRxiv - Cell Biology 2020Quote: ... Detergent was removed by three addition of BioBeads SM-2 adsorbent resin (25 mg per 1 mL of lipid mixture) (BioRad) for 2 h each at 4°C ...
-
bioRxiv - Biochemistry 2021Quote: ... The membrane was let dry and thereafter blocked on a shaker for 10 min in 15 ml blocking buffer (1% casein in TBS, BioRad). The blocking solution was discarded ...
-
bioRxiv - Cancer Biology 2022Quote: ... and 2 µl of the lysates were subject to 1 ml of 0.2x Bradford protein dye reagent (Bio-Rad #5000006) for protein quantification ...
-
bioRxiv - Cancer Biology 2022Quote: ... and the pellet was resuspended in 1 ml of BM1* and cells were counted using a TC20 Automated Cell Counter (BioRad). Single-cell suspensions were mostly re-seeded at the same density as their parental/previous generation/passage.
-
bioRxiv - Biochemistry 2021Quote: A 9.5% gel solution was prepared by combining 47.5 mL 30% Bis/Acrylamide solution 29:1 (BIO-RAD, #161-0156) with 41mL MilliQ Water ...
-
bioRxiv - Bioengineering 2022Quote: ... or ~7.5 million cells/mL (Fig S18c) before loading into wells of preformed phantoms consisting of 1% agarose (Bio-Rad) in PBS.
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... detergents and undigested protein were removed using a Bio-Scale Mini Macro-Prep High S 1 mL cartridge (Bio-Rad) on an Agilent 1100 HPLC system at 1 mL/min ...
-
bioRxiv - Immunology 2023Quote: ... Blocked membranes were incubated with HuCAL anti-bovine Mincle CRD antibodies (2.5 µg mL-1) before incubation with secondary goat-anti-human IgG F(ab’)2: HRP (STAR126P, Bio-Rad) antibody ...
-
bioRxiv - Microbiology 2023Quote: ... The supernatant was applied to an equilibrated 1-ml StrepTrap HP chromatography column connected to the NGC Chromatography System (BioRad), washed with 20 CV of StrepA and elution was performed by applying a gradient concentration of StrepB (150 mM NaCl ...
-
bioRxiv - Biochemistry 2023Quote: ... The membrane was rinsed three times for 10 minutes in TBS followed by the addition of 1 mL ECL solution (BioRad) to the membrane and visualized on the ImageQuant LAS 500.
-
bioRxiv - Immunology 2023Quote: ... and the cells were resuspended in 1 mL of PBS and counted using a TC20 automatic cell counter (Bio-Rad). 4 mL of PBS was added to the sample and spun at 200 ×g for ten minutes to remove any contaminating Ficoll ...
-
bioRxiv - Biophysics 2021Quote: To extract lipids, purified SaPgsA (5.82 mg ml-1, 200 μl) was mixed with 40 mg SM2 Biobeads (Bio-rad, USA) and gently shaking overnight at 4 °C to remove detergent ...
-
bioRxiv - Biophysics 2021Quote: ... The DDM/CHS detergent was then removed by overnight incubation with Bio-Beads SM-2 (15 mg per 1 ml protein/detergent/amphipols mixture, Bio-Rad) at 4 °C ...
-
bioRxiv - Cell Biology 2022Quote: ... Cells were subsequently centrifuged at 1200 rpm for 5 minutes before their pellets being resuspended in 1 ml medium for cell counting using TC10 automated cell counter (BioRad USA) before re-plating ...
-
bioRxiv - Molecular Biology 2022Quote: ... at a 1:5 w/w ratio for 2 hours before addition of 100 mg mL-1 Bio-Beads SM-2 resin (Bio-Rad) and then incubated overnight at 4 °C with gentle agitation to remove detergent ...
-
bioRxiv - Microbiology 2022Quote: ... Each well was then coated with 150 µl of a blocking buffer consisting of PBS and 40 mg ml-1 blotting-grade blocker (Bio-Rad). The plates were incubated with the blocking buffer for 1 h at room temperature ...
-
bioRxiv - Cancer Biology 2019Quote: ... cells were incubated for one hour either with a 1:5 dilution of Rat anti Human CD3:Alexa Fluor®647 (0.05 mg/mL) (clone CD3-12; Bio-Rad) or with undiluted CD8 (AM22 ...
-
bioRxiv - Biochemistry 2021Quote: ... The supernatant was incubated for 1 h at 4°C with 0.5 mL Profinity IMAC resin (Bio-Rad Laboratories, Hercules, CA) in a buffer containing 20 mM MOPS-Na (pH 7.4) ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... were added to the control wells without cells (Lanes 1 and 12) ranging from 0.125 – 2 mg/ml (BioRad 500-0202) and treated with formalin and NaOH at the same concentrations as the cells ...
-
bioRxiv - Microbiology 2021Quote: ... Each well was then coated with 150 µl of a blocking buffer consisting of PBS and 40 mg ml-1 blotting-grade blocker (Bio-Rad). The plates were incubated with the blocking buffer for 1 hour at room temperature ...
-
bioRxiv - Bioengineering 2022Quote: ... ethidium bromide at a final concentration of 0.46 μg mL−1 was used and the DNA was visualized under UV light using a GelDoc XR+ system (Bio-Rad).
-
bioRxiv - Molecular Biology 2023Quote: ... Cells were subsequently centrifuged at 1200 rpm for 5 minutes before their pellets being resuspended in 1 ml medium for cell counting using TC10 automated cell counter (BioRad USA) before re-plating ...
-
bioRxiv - Molecular Biology 2023Quote: ... Amplification products were analysed on 1% agarose gel (80V for 1 hr) stained with ethidium bromide (10 mg/mL) and viewed on Gel Doc XR Imaging System (BioRad, USA).
-
bioRxiv - Biochemistry 2023Quote: ... 20 minutes) and the clear lysate was purified on HisTrap HP 1 ml affinity column (Cytiva) by FPLC system (NGC™, BioRad). The protein was eluted from the column using a linear gradient (Elution buffer ...
-
bioRxiv - Plant Biology 2023Quote: Lysate was filtered and applied to a 1 mL Mini Profinity IMAC cartridge using BioLogic low-pressure chromatography system (Bio-Rad). An imidazole gradient was used to elute the protein in elution buffer (300 mM imidazole ...
-
bioRxiv - Bioengineering 2024Quote: ... PCR products were mixed 1:6 with a loading dye and run on an agarose gel (1%) in Tris-acetate-EDTA buffer supplemented with 0.2 µG/mL of Ethidium Bromide (Biorad, Hercules, California). DNA was visualized under a short-wavelength UV light to confirm the lack of amplification for Heat-Killed Microbiome PMA-treated in comparison to the Heat-Killed Microbiome control (Supplementary Figure 2).
-
bioRxiv - Biochemistry 2024Quote: ... Nanodisc formation was initiated by adding washed Bio-Beads (200 mg dry weight per 1 mL of the protein mixture; Bio-Rad), and the mixture was rotated for two hours at 4 °C ...
-
bioRxiv - Microbiology 2024Quote: ... using a Superdex 30 Increase 10/300 GL (Cytiva) equilibrated with 50 mL water operated at 500 µL min−1 on an NGC medium-pressure chromatography system (Bio-Rad). Per chromatography ...
-
bioRxiv - Bioengineering 2023Quote: ... / DNase (0.19 mg/mL, BioRAD) in DMEM ...
-
bioRxiv - Biophysics 2021Quote: The removal of DDM in the protein solutions was done by fixing the protein concentration at 1 mg/ml and using 30 mg of BioBeads SM2 (Bio-Rad, CA) per mg of protein ...
-
bioRxiv - Microbiology 2021Quote: ... Gels were stained with ethidium bromide (0.5 mg mL-1) and photographed using the Quantity One electrophoresis analysis system (Bio-Rad, CA, USA). Gel images were digitally normalized to a single DNA marker to reduce gel-to-gel banding pattern variability ...
-
bioRxiv - Systems Biology 2021Quote: Samples were normalized to 1 mg/mL protein in 0.1% Azo by the Bradford assay (Bio-Rad, Hercules, CA, USA, Cat# 5000006) using bovine serum albumin to generate a standard curve ...
-
bioRxiv - Microbiology 2021Quote: ... the gel was stained with 1 mg/mL ethidium bromide and visualized with the ChemiDoc XRS system (Bio-Rad Laboratories, CA, USA). Genetic similarities were measured using the Dice coefficient and the clustering was carried out by the unweighted-pair group method with arithmetic averages (UPGMA ...
-
bioRxiv - Microbiology 2020Quote: Two hundred µL of overnight bacterial cultures were transferred 5 mL of a 1:10 dilution of TSB medium (Bio-Rad, USA) supplemented with 1 mg mL-1 L-tryptophan and incubated at 30°C overnight (Gordon & Weber 1951) ...
-
bioRxiv - Neuroscience 2021Quote: Autaptic murine striatal neurons (DIV 15-18) were incubated with 1 μg/ml human GABAAR mAb or control antibody (anti-CD52, Bio-Rad, #HCA175) at 37°C for 24 hours ...
-
bioRxiv - Pathology 2023Quote: ... Heparin Sepharose 6 Fast Flow beads (1 ml) (Healthcare Life Sciences) were loaded into disposable Bio-Spin® chromatography columns (Bio-Rad) and packed with 2 ml of equilibration buffer (0.15 M NaCl in 25 mM HEPES ...