Labshake search
Citations for Bio-Rad :
651 - 700 of 1066 citations for 7 Bromo benzo c isothiazole since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2024Quote: 96-well flat-bottom NUNC Maxisorp plates were coated overnight at 4 °C with 0.5 mg/mL recombinant HBsAg (BIO-RAD). Plates were washed with PBS/T ...
-
bioRxiv - Bioengineering 2023Quote: ... and the supernatant was incubated at 95°C for 10 minutes in the presence of Laemmli sample buffer (Bio-Rad). Proteins (20 μg per sample ...
-
bioRxiv - Microbiology 2023Quote: ... All samples collected were heated to 95°C for 5 minutes before resolving on a 12% mini-PROTEAN precast gel (BioRad). A Western blot using polyclonal EssR antiserum was conducted following the protocol outlined in the Western blot method section below ...
-
bioRxiv - Molecular Biology 2024Quote: ... DNA was then eluted and reverse-crosslinked by incubating the beads at 95°C for 10 min in presence of 100 µl of 10 % Chelex resin (BioRad), treated with Proteinase K (Roche ...
-
bioRxiv - Physiology 2024Quote: ... Protein extracts were denatured at 95 °C for 10 min and separated in 10% SDS-PAGE gels (1610156, Bio-Rad) at 80 V for ∼45 min followed by 110 V for ∼65 min ...
-
bioRxiv - Molecular Biology 2024Quote: ... 95 °C) and 1.25 µg sample was resolved on a 4-12% acrylamide Criterion XT Bis-Tris gel (Bio-Rad) in MOPS buffer at 100 V for 20 min and subsequently at 150V for 190 min on ice along with PageRuler™ Plus Prestained Protein Ladder (Thermo Scientific ...
-
bioRxiv - Molecular Biology 2024Quote: ... 0.01% bromophenol blue) and denaturated 5 min at 95°C before protein separation by SDS–PAGE on 4-15% precast gels (Biorad).
-
bioRxiv - Microbiology 2024Quote: ... the samples were boiled at 95°C for 10 minutes and resolved on a TGX stain-free gel (Bio-Rad) for SDS-PAGE analysis ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were denatured for 10 minutes at 70°C and proteins were separated (55min, 200V) on a Midi 4-12% Bis-Tris gel (BioRad) in 1x MOPS buffer (BioRad ...
-
bioRxiv - Molecular Biology 2024Quote: ... and heat denatured at 95°C for 10 min before loading onto a 4-15% Tris-glycine gel (Bio-Rad) and electrophoresed at 125 V ...
-
bioRxiv - Microbiology 2023Quote: ... cells and plasmids in 10% glycerol were first heat-shocked at 56°C for 2 min followed by immediate electroporation in 0.1-cm cuvette (Bio-Rad) using electroporation program of 2.5 kV and time constant of 2.3-2.5 ms on the Bio-Rad Micropulser ...
-
bioRxiv - Microbiology 2024Quote: Protein samples were incubated at 95°C for 10 minutes before being resolved on TGX Stain-free gels (Bio-Rad). The proteins were transferred onto 0.2 μm nitrocellulose membranes using Trans-Blot Turbo Transfer (Bio-Rad) ...
-
bioRxiv - Bioengineering 2024Quote: ... The proteins were incubated for one hour at 65 and 70°C in a thermocycler with heated lid (T100, BioRad) Binding to D25 and MPE8 antibodies was measured afterwards following the protocol described above.
-
bioRxiv - Bioengineering 2024Quote: ... Samples in 8-well tubes were heat-shocked for three minutes at 72 °C (C1000 Touch Thermal Cycler, Bio-Rad), placed on wet ice for two minutes ...
-
bioRxiv - Biochemistry 2024Quote: ... The samples were heated from 35 °C to 79°C at a rate of 0.3 °C per 15 s in a CFX96 Touch Real-Time PCR Detection System (Bio-Rad). Fluorescence intensity was determined using excitation (λem=525/20 nm ...
-
bioRxiv - Cell Biology 2024Quote: ... eluate was incubated at 70 °C then run on 4-12% NuPAGE gell and transferred to LF PVDF membrane (BioRad). Western-blot analysis were done with the next antibodies ...
-
bioRxiv - Cancer Biology 2024Quote: ... Membranes were blocked with 5% non-fat dry milk and incubated with primary antibodies overnight at 4 °C and then incubated with host species-matched HRP-conjugated secondary antibodies (BioRad) for 1 hour at room temperature ...
-
bioRxiv - Physiology 2023Quote: ... Protein extracts were denatured at 95 °C for 10 min and separated on 10% SDS-PAGE gels (1610156, Bio-Rad) at 80 V for ∼40 min followed by 110 V for ∼70 min ...
-
bioRxiv - Microbiology 2024Quote: ... 7.5 mg of proteins was diluted in ChIP buffer supplemented with 0.01% SDS and precleared for 1 hr at 4°C with 50 μl of SureBeads Protein A Magnetic Beads (BioRad) and 100 μg bovine serum albumin (BSA) ...
-
bioRxiv - Genetics 2024Quote: ... chromosomal DNA was prepared in 1.3% of low-melting point agarose plugs as described in 74 and run at 14 °C with 1X TBE buffer in a CHEF DR-III apparatus (BioRad) using the field 6V/cm at a 120°angle for 48 h ...
-
bioRxiv - Biochemistry 2024Quote: ... denatured for 10 min at 96°C before it was separated at a 4-20 % PROTEAN TGX stain-free gel (BioRad) at 200 V for 30 min ...
-
bioRxiv - Plant Biology 2023Quote: ... Linearized plasmid was mixed with 250 μL of cells at 15°C in a 0.4 cm gap electroporation cuvette and transformed immediately by electroporation using a Gene Pulser II (Bio-Rad) set to 800V and 25 μF ...
-
bioRxiv - Neuroscience 2023Quote: ... The samples were eluted by heating at 100°C for 5 min in Laemmli sample loading buffer (Bio-Rad, USA), and resolved on an SDS/PAGE ...
-
bioRxiv - Microbiology 2020Quote: ... One or two micrograms of the concentrated viruses were heated at 95 °C for 5 min before being resolved on 4-20% SDS-PAGE (Bio-Rad) using the Novex™ Sharp Pre-stained Protein Standard (ThermoFisher Scientific ...
-
bioRxiv - Microbiology 2020Quote: ... Supernatants were mixed with SDS sample buffer containing DTT and incubated for 5 min at 95°C prior to fractionation by SDS-PAGE analysis on 4%–15% Mini-PROTEAN TGX Stain-Free Protein Gels (Bio-Rad). Transfer to nitrocellulose membranes and probing for Western blot analysis was as described previously ...
-
bioRxiv - Evolutionary Biology 2020Quote: Samples were heated at 95°C for 10 minutes before loading into 7.5% Mini-PROTEAN® TGX™ Precast Protein Gels (BioRad) and running at 150V for approximately 90 minutes at 4°C in 1X tris-gylcine running buffer ...
-
bioRxiv - Molecular Biology 2020Quote: ... which is pre-equilibrated by Buffer A before use with rotation at 3 hr in 4°C in Econo-Pac Chromatography Columns (20 mL, Bio-Rad). After the unbounded fraction was discarded ...
-
bioRxiv - Cancer Biology 2021Quote: ... diluted in nuclease-free water and the primer(s) were incubated at 65°C for 5 minutes in the DNA Engine Dyad®Peltier Thermal Cycler (BioRad). Afterward ...
-
Osh6 requires Ist2 for localization to the ER-PM contacts and efficient phosphatidylserine transportbioRxiv - Cell Biology 2020Quote: ... Protein samples were heated at 55°C for 10 min and 10 μl was loaded on SDS–PAGE (4-20% Mini-PROTEAN TGX Stain-Free, Bio-Rad) and analyzed by Western blot.
-
bioRxiv - Genetics 2019Quote: ... and heated at 90°C for 5 min before being run on a stain free gel and imaged by GelDoc imager (BIO-RAD).
-
bioRxiv - Microbiology 2019Quote: ... Samples were boiled for 5 minutes at 95°C before separation on a gradient 4-20% SDS-PAGE gel (Bio-Rad). Samples were then transferred to nitrocellulose membrane using standard methods for semi-dry transfer (Bio-Rad) ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... to 10 μL RNA and incubating at 65°C for 5 min on a C1000 Touch Thermal Cycler (Bio-Rad, USA) followed by chilling on ice ...
-
bioRxiv - Biochemistry 2022Quote: ... and heated to 100 °C for 5 min and resolved on 4-20% (w/v) gradient SDS-PAGE gels (Bio-Rad) with Tris-glycine buffer ...
-
bioRxiv - Neuroscience 2021Quote: ... was then added and the solution was mixed at 4°C for 10 minutes before addition of 100 mg of Biobeads SM2 (Bio-Rad). Biobeads were washed into methanol ...
-
bioRxiv - Molecular Biology 2021Quote: ... Cleavage-related change in fluorescence signal of the probe was measured every 30 s for 60 min under incubation at 37°C using a Real-time PCR system (Bio-Rad Laboratories ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were heated to 50°C for 1-10 min before addition of 40 μl molten CleanCut agarose (Bio-Rad 1703594), vortexing vigorously for 5 s before pipetting in plug mould (Bio-Rad 1703713 ...
-
bioRxiv - Molecular Biology 2020Quote: ... Samples were heated to 50°C for 2-3 min before addition of 40 μl molten CleanCut agarose (Bio-Rad 1703594), vortexing vigorously for 5 s before pipetting in plug mould (Bio-Rad 1703713 ...
-
bioRxiv - Molecular Biology 2021Quote: ... The beads were fully resuspended by vortexing and incubated at 55°C for 15 minutes in a C1000 Touch thermal cycler (BIO-RAD) then re-pelleted with the magnet ...
-
bioRxiv - Cell Biology 2022Quote: ... 100 μl of the cell suspension was spread on a single partitioned YPDA plate and incubated at 30°C for 48 h prior to imaging on a ChemiDoc imaging system (Bio-Rad). The area of all colonies ...
-
bioRxiv - Cell Biology 2020Quote: ... lysates were cleared by centrifugation at 16000xg for 5 min at 4°C and the total protein concentration in the lysates was measured by Bradford protein assay (Bio-Rad). For western blot analysis 25 µg of each lysate was boiled for 5 min at 98°C (for the detection of LC3B and ATG9A samples were heated at 60°C for 10 min ...
-
bioRxiv - Immunology 2019Quote: ... 40 cycles of reaction including denaturation at 94° C for 15 sec followed by annealing at 60° C for 30 sec were carried out using C1000 thermal cycler CFX96 real-time system (Bio-Rad). Gene expression was normalized to beta actin ...
-
bioRxiv - Physiology 2019Quote: ... paraffin-embedded sections were incubated at 4°C overnight with antibodies for F4/80 (MCA497G, Bio-Rad Laboratories, Hercules, CA, USA), HILPDA (sc-137518 HIG2 Antibody (C-14) ...
-
bioRxiv - Pathology 2019Quote: ... 20% methanol and MilliQ water) overnight at 4°C in a wet transfer apparatus at 70 mA constant voltage (Bio-Rad). Detection of the chemiluminescence immunochemical reaction was performed on a ChemiDoc ™ XRS + Molecular Imager® (Bio-Rad ...
-
bioRxiv - Neuroscience 2019Quote: ... 0.02% NaN3 and 1 mM DTT at pH 7.4 at 37°C in a thermal cycler (BioRad DNA Engine PTC-200). In some cases ...
-
bioRxiv - Neuroscience 2019Quote: ... incubated overnight with primary antibody in 5% milk in TBST at 4°C and subsequently washed in TBST and incubated for 1 hr at room temperature with HRP-linked secondary antibody (Bio-Rad) in 5% milk in TBST ...
-
bioRxiv - Bioengineering 2019Quote: Optimal MIP annealing temperature was determined to be 60.4 °C based on yield after circularization with a gradient of annealing temperatures ranging from 58–70 °C on a CFX96 Real-Time qPCR System (Bio-Rad). For all of these experiments ...
-
bioRxiv - Bioengineering 2019Quote: ... qPCR was conducted for 50 cycles at an annealing temperature of 56 °C on a CFX Connect Real-Time PCR Detection System (Bio-Rad). A melt curve was generated at the end of the PCR reaction and a subset of reactions were run on a 1% agarose gel to ensure that only one product of the expected size was amplified per primer pair ...
-
bioRxiv - Microbiology 2019Quote: T1L virions (2×1012 particles/ml) were incubated for 5 min at 55°C in a S1000 thermal cycler (Bio-Rad). The total volume of the reaction was 30 μl in virus storage buffer (10 mM Tris ...
-
bioRxiv - Biophysics 2021Quote: ... The mixture was diluted to ~30 mL with sample buffer and stirred at 4°C for 30 min prior removal of C12E8 by adding 4 g of Bio-Beads SM-2 (Bio-Rad) in stages of 0.5 ...
-
bioRxiv - Plant Biology 2020Quote: ... Liposomes were eluted from the beads by boiling at 95°C for five minutes after the addition of 10x sample reducing agent (Nupage, NP0009) and 4x Laemmli sample buffer (Biorad, #1610747).