Labshake search
Citations for Bio-Rad :
501 - 550 of 1066 citations for 7 Bromo benzo c isothiazole since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2023Quote: ... 1 minute extensions and a final hold temperature of 12 C using a C1000 Touch Thermal Cycler (BioRad #1851197). Samples were subsequently loaded into the QX200 Droplet Reader for quantification ...
-
bioRxiv - Microbiology 2023Quote: ... The resulting mixtures were put at 37°C for 30min and transferred to 0.4 cm electroporation cuvettes (Gene Pulser/MicroPulser, BioRad), which were submitted to electroporation using 10ms pulses at 180V repeated three times at one-second intervals ...
-
bioRxiv - Molecular Biology 2023Quote: ... Total proteins were centrifuged (15000 rpm at 4°C) and determined using protein assay dye reagent (Bio-Rad, 500006). Subsequently ...
-
bioRxiv - Neuroscience 2023Quote: ... Protein extracts were denatured 5 min at 95°C in a Laemmli buffer (Bio-Rad, Marnes-la-Coquette, France) with β-mercaptoethanol (1/10 ...
-
bioRxiv - Neuroscience 2023Quote: ... were centrifuged at 20,000 x g for 25 min at 4⁰C and supernatants were assayed for total protein (Bradford assay, BioRad). Aliquots of WCL (30 µg total protein ...
-
bioRxiv - Developmental Biology 2023Quote: ... samples were heated to 95°C with 2X sample buffer for 5 mins before loading the samples directly to a 0.2μm nitrocellulose (BioRad, #1704159) membrane ...
-
bioRxiv - Biochemistry 2024Quote: ... 0.1% SDS for 10 min at 60°C and images captured using a ChemiDoc MP Imaging system (BIO-RAD).
-
bioRxiv - Immunology 2024Quote: ... The indicated mass of protein was boiled for 5 minutes at 95°C with 4x Laemmeli Buffer (BioRad #1610747) supplemented with 2.5% (v/v ...
-
bioRxiv - Neuroscience 2024Quote: ... by boiling for 10 min at 98°C before loading onto a 4-20% gel (Bio-Rad, Hercules, CA), then transferred to PVDF 0.22 m membrane (Bio-Rad ...
-
bioRxiv - Microbiology 2023Quote: ... 2 min at 72°C for final extension in a T100 Thermal Cycler (BIO-RAD Lab. Inc., Hercules, CA). The sizes of PCR products were checked by running agarose gel electrophoresis ...
-
bioRxiv - Molecular Biology 2023Quote: ... Pulse-field gel electrophoresis was carried out in a 0.9% agarose gel in 0.5× TBE at 14°C with a CHEF DR III from Bio-Rad with a constant switch time of 20 s during 24 h ...
-
bioRxiv - Cancer Biology 2024Quote: ... The cells were centrifuged for 15 min at 15,000 x g at 4°C and the supernatant was quantified with Quick Start Bradford 1X Dye Reagent (BioRad), using an albumin curve to determine the concentration of protein to be placed ...
-
bioRxiv - Cell Biology 2024Quote: ... and heated to 98°C for 5 min and transferred to Trans-Blot PVDF Transfer membranes (Bio-Rad, #1704157). Membranes were blocked for 1 h at room temperature with TBS-T (0.1% Tween 20 ...
-
bioRxiv - Microbiology 2024Quote: ... Samples were heated for 10 mins at 70°C and loaded onto 4-20% polyacrylamide gradient gels (Bio-Rad) for electrophoretic separation in Tris-glycine-SDS buffer (Bio-Rad) ...
-
bioRxiv - Synthetic Biology 2021Quote: ... Proteins and peptides bearing C-terminal 6xHis tags were detected with mouse anti-6xHis antibody clone AD1.1.10 (BioRad; Cat # MCA1396GA) while detection of glycosylated CRM197-FtO-PS was with anti-F ...
-
bioRxiv - Cell Biology 2020Quote: ... The lysate was cleared at 12 000 rpm for 10 min at 4°C and protein concentration adjusted with Bradford assay (BioRad). The caspase-3/7 activity of the lysates or the plated cells was analysed using Apo-ONE ® Homogenous Caspase-3/7 Assay (Promega ...
-
bioRxiv - Genetics 2021Quote: ... unspecific binding sites were blocked over night at 4°C with 3% milk powder (Marvel) in Tris Buffered Saline solution (BioRad) including 1% Tween 20 (Sigma ...
-
bioRxiv - Developmental Biology 2021Quote: ... Samples were boiled at 95 °C for 5 mins with 6xSDS sample buffer before loading onto 4-20% Tris-glycine gels (BioRad). Resolved proteins were transferred to nitrocellulose membranes using the Trans-Blot® Turbo system (BioRad ...
-
bioRxiv - Neuroscience 2021Quote: ... A 1:5 dilution from serum samples was combined with 4 °C Laemmli sample buffer (Bio-Rad Laboratories, Hercules, CA) and heated at 100 °C for 10 min before loading into 12% Mini-PROTEAN TGX Stain-Free gels (Bio-Rad Laboratories ...
-
bioRxiv - Molecular Biology 2020Quote: ... Proteins were separated at 175 V for 3-4 hours at 4°C and then transferred to nitrocellulose membrane (BioRad) by using a Criterion blot cell (BioRad ...
-
bioRxiv - Neuroscience 2021Quote: ... Proteins were heated at 60°C and loaded on Mini-Protean TGX precast gels (456–1084, 4-15 %, Bio-Rad Laboratories ...
-
bioRxiv - Molecular Biology 2020Quote: ... Lysates were cleared by centrifugation at 14,000×g for 30 min at 4°C and equalized using quick start Bradford 1x dye reagent (BioRad, 5000205). Ni-NTA resin was washed three times with lysis buffer containing 20mM imidazole pH 8.0 and 5mM β-mercaptoethanol while samples were prepared ...
-
bioRxiv - Molecular Biology 2021Quote: ... The supernatant from the cell lysate was collected by centrifuging the cell lysate at 10,000 g for 10 min at 4°C and further diluted in lysis buffer to 8.0 ug/ul using a modified Bradford protein quantification assay (Bio-Rad), flash-frozen in liquid N2 ...
-
bioRxiv - Cell Biology 2022Quote: ... using the BioRad transfer system at 100 V for 60 min at 4°C or with Trans-Blot Turbo Mini PVDF Transfer Packs using Trans-Blot Turbo Transfer System (Biorad). The membrane was blocked for 30 min with the Odyssey Blocking Buffer (TBS ...
-
bioRxiv - Cell Biology 2019Quote: ... Cells were grown on selective plates at 30°C for 2 days and imaged using a Geldoc system (Bio-RAD). For liquid cultures cells were diluted to OD600 0.15 and incubated at 30°C ...
-
bioRxiv - Plant Biology 2019Quote: Proteins were separated on denaturing SDS-PAGE followed by an electrotransfer at 4 °C onto a PVDF membrane (0.2 µM, Bio-Rad). NRT2.1 was detected using three different anti-NRT2.1 antisera produced by Eurogentec against either the synthetic peptide TLEKAGEVAKDKFGK (anti-NRT2.1 19) ...
-
bioRxiv - Cancer Biology 2019Quote: ... and extension at 72°C for 30 seconds using the CFX96 Real-Time PCR Detection System (Bio-Rad Laboratories, Inc.). Analysis and fold differences were determined using the comparative threshold cycle method ...
-
bioRxiv - Microbiology 2019Quote: ... boiled (95°C, 10 min), centrifuged (1,000 × g, 2 min) and loaded on 10% or 4-20% SDS-PAGE gel (Bio-Rad). Following electrophoresis (60 min ...
-
bioRxiv - Molecular Biology 2019Quote: ... Samples were boiled at 95 °C for 10 mins with 6×SDS sample buffer before loading onto 4–20% Tris-glycine gels (BioRad). Resolved proteins were transferred to nitrocellulose membranes using the Trans-Blot® Turbo system (BioRad ...
-
bioRxiv - Developmental Biology 2019Quote: ... monomeric ATP-bound 2 μM rabbit muscle actin was treated overnight at 4°C with analytical grade anion exchange resin (BioRad), hexokinase (Sigma-Aldrich) ...
-
bioRxiv - Cancer Biology 2019Quote: ... The eluted DNA and 10% of respective input DNA were reverse cross-linked at 65°C overnight and used for the qPCR using SYBR Green qPCR mix and a CFX96 instrument (BioRad).
-
bioRxiv - Biophysics 2021Quote: ... The lysate was centrifuged at 30,000 x g for 30 min at 4°C before being loaded into a gravity flow column (Bio-Rad) and purified by Ni-NTA resin (UBP Bio ...
-
bioRxiv - Genetics 2021Quote: ... temperature of hybridization 61°C) and fluorescent intensity was measured in a QX100 Droplet Reader (Bio-Rad Laboratories, Hercules, CA) and the signal data was analysed using QuantaSoft Analysis Pro (1.0.596 ...
-
bioRxiv - Genetics 2021Quote: ... rotated at 4°C for 2h and then poured into a Econo-Column® Chromatography column (Bio-Rad, Hercules, CA). After extensive washing first with 80 mL of 20 mM Tris HCl [pH8@4°C] ...
-
bioRxiv - Microbiology 2021Quote: ... The plates were incubated at 30 °C and pictures were taken every day with the setting “Blots: Colorimetric” using a ChemiDoc (BioRAD).
-
bioRxiv - Genetics 2020Quote: ... The reaction was incubated at 37°C for 15 min and stopped by the addition of 10 μl of TBE-UREA-sample buffer (BioRad). The samples were analysed on a 15% denaturing polyacrylamide gel in 1 × TBE buffer.
-
bioRxiv - Molecular Biology 2020Quote: ... 95°C), and run (loaded in 2 wells, 20 μL per well) on a 10 well 10% TBE-urea gel (Biorad) (200 V ...
-
bioRxiv - Molecular Biology 2020Quote: ... 2.5 mg/ml Orange G), denatured (2 min, 80°C) and run on a 10 well 10% TBE-urea gel (Biorad) (200 V ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 30,000 x g for 30 min at 4 °C before being loaded into a gravity flow column (Bio-Rad) and purified by Ni-NTA resin (UBP Bio ...
-
bioRxiv - Bioengineering 2021Quote: ... The cell pellet was re-suspended in 10mL of fresh culture media (37°C) and cells density was calculated with a TC20 automated cell counter (BioRad). 100’000 to 150’000 cells were plated per 35mm glass-bottom dish and transfected the following day ...
-
bioRxiv - Bioengineering 2020Quote: ... NJ) overnight at 4°C and visualized using the Bio-Rad ChemiDoc MP Imaging System (Bio-Rad Laboratories, Hercules, CA).
-
bioRxiv - Biochemistry 2021Quote: ... pH 5.3 (murine P-domains) or pH 7.3 (GII.4 Saga P-domain) at 4 °C via Micro Bio-Spin 6 columns (Bio-Rad) according to the manufacturer’s protocol ...
-
bioRxiv - Biochemistry 2020Quote: ... Reactions were incubated for 15 min at 30 °C and then applied to a Bio-Gel A-1.5m (Bio-Rad) resin packed in a 0.7×15cm Flex-Column (Kimble) ...
-
bioRxiv - Neuroscience 2021Quote: MV pellets were sonicated three times for 10 s at 20 Hz (Vibra cell VCX130) in 2% SDS and heated at 56°C in Laemmli loading buffer (Biorad). The protein content was measured using the Pierce 660 nm protein assay kit (Thermo Scientific ...
-
bioRxiv - Cell Biology 2021Quote: ... 25 µg of protein lysate was heat-denatured at 95°C for 5 minutes in Laemmli sample buffer (Bio-Rad), and then separated using a 4 to 12% Bis-Tris polyacrylamide gel (Invitrogen ...
-
bioRxiv - Cell Biology 2021Quote: ... Extracts were stored at -20°C or immediately resolved on an 7.5% SDS-PAGE pre-cast gel (Bio-Rad, #4568023) and transferred onto a 0.2 μm nitrocellulose membrane (GE healthcare ...
-
bioRxiv - Biochemistry 2021Quote: ... with or without a C-terminal FLAG™-tag followed by a foldon trimerization domain and an octahistidine tag was heated to 95 °C in XT sample buffer (Biorad) for 5 minutes ...
-
bioRxiv - Microbiology 2020Quote: Steady-state equilibrium binding of post-vaccination rabbit polyclonal serum was monitored at 25°C using a ProteOn surface plasmon resonance (BioRad). The purified recombinant Spike proteins were captured to a Ni-NTA sensor chip with 200 resonance units (RU ...
-
bioRxiv - Neuroscience 2020Quote: ... The mixtures were incubated at 37°C in micro PCR tubes on a thermal cycler (BioRad DNA Engine PTC-200). At the indicated time points ...
-
bioRxiv - Neuroscience 2020Quote: ... 15 min at +4°C) and the supernatant was used to measure the protein concentrations using the Lowry method (Biorad DC protein assay ...