Labshake search
Citations for Bio-Rad :
2551 - 2600 of 7082 citations for Rat Myristoylated Alanine Rich C Kinase Substrate MARCKS ELISA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2019Quote: ... containing 2μL of 20X reducing buffer at 95°C for 10 min and separated by SDS-PAGE short migration on 12% SDS-PAGE (Criterion XT Precast gels–BioRad). After a short migration ...
-
bioRxiv - Microbiology 2019Quote: ... Samples were boiled for 10 min at 100°C in SDS-PAGE sample buffer and separated on Tris-glycine 4-20% SDS-PAGE gels (BioRad). Detected protein bands for each blot were quantified using ImageJ software for gel densitometry measurements of NSP4:GAPDH.
-
bioRxiv - Microbiology 2019Quote: ... The lysate was used to bind to 200ul of IgG Sepharose beads (Amersham Biosciences) for 2h at 4°C using a disposable chromatography column (BioRad). The IgG-Sepharose column was washed with 35 ml of protein A binding buffer (10 mM Tris–HCl ...
-
bioRxiv - Physiology 2019Quote: ... Protein lysates were prepared by centrifugation at 15,000g for 10min at 4°C and protein concentrations were calculated using Bradford assay (BioRad, UK) with BSA as a standard ...
-
bioRxiv - Cell Biology 2020Quote: ... The embryos were mounted on a 2 % agarose pad and heat-shocked at 30°C for 1h (Thermocycler Bio-Rad). After 2h recovery at 20°C ...
-
bioRxiv - Cell Biology 2021Quote: Purified substrates and enzymes were centrifuged (16,000 g, 5 min, 4°C) before protein concentration was determined by Bradford assay (Bio-Rad) according to the manufacturer’s instructions ...
-
bioRxiv - Cancer Biology 2021Quote: ... Lysates were denatured by boiling in 1x Laemmli buffer at 95°C for 5 minutes and loaded on a 4–20% gradient gel (BioRad). PVDF membranes were used for proteins wet transfer (Bio-Rad) ...
-
bioRxiv - Cell Biology 2020Quote: ... The lysate was cleared by centrifugation at 10,000xg for 10 minutes at 4°C and then boiled in 2x Laemmli Sample Buffer (Bio-Rad). After SDS-PAGE ...
-
bioRxiv - Developmental Biology 2021Quote: ... was boiled at 95⁰C for 5 minutes prior to electrophoresis on a 4-20% gradient SDS-PAGE gel (BioRad). Membrane was blocked with 5% skim milk in TBST 1x on rocker for 1 hour ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples (10 µg protein) were denatured at 95°C for 5 min in 4x Laemmli Sample Buffer (1610747, Bio-Rad) or Novex NuPAGE LDS Sample Buffer (NP0007 ...
-
bioRxiv - Developmental Biology 2021Quote: ... boiled at 99 °C for 10 min and supernatants were loaded on 4–12% Criterion XT Bis–Tris precast gel (Biorad). The gel was fixed with 40% methanol and 10% acetic acid and then stained for 1 hour using colloidal coomassie dye G-250 (Gel Code Blue Stain ...
-
bioRxiv - Cell Biology 2020Quote: ... Lysates were cleared for 10 min at 14000 rpm at 4°C and protein concentration of the supernatant was determined by using Protein Assay (BioRad). The co-immunoprecipitation was performed using GFP trap® beads (Chromotek ...
-
bioRxiv - Biochemistry 2021Quote: ... The reaction mixture was incubated for 30 minutes at 30°C and stopped by adding 12 μl of Laemmli sample buffer (Biorad). After HMT reactions ...
-
bioRxiv - Microbiology 2021Quote: ... for 10 minutes at 37 °C and analyzed with Bio-Rad S3 Cell Sorter (Bio-Rad Laboratories Inc., California, USA) and ProSort™ Software using green fluorescence as a trigger.
-
bioRxiv - Immunology 2021Quote: Steady-state equilibrium binding of hCoV-2IG lots was monitored at 25°C using a ProteOn surface plasmon resonance (BioRad). The purified recombinant SARS-CoV-2 RBD proteins were captured to a Ni-NTA sensor chip with 200 resonance units (RU ...
-
bioRxiv - Microbiology 2020Quote: ... coated with PBS alone or with 2 µg/ml of SARS-CoV-2 S protein in PBS overnight at 4°C were blocked for 1 hour with 3% nonfat dry milk (Biorad) in PBS ...
-
bioRxiv - Genomics 2021Quote: ... centrifuged at 14,000 rcf for 20 min at 4°C and protein amounts in the supernatant determined using the Bradford assay (BioRad) according to the manufacturer’s instructions ...
-
bioRxiv - Cell Biology 2021Quote: ... The membrane was subsequently washed 3 times in TBS+0.05 % Tween-20 over 45 min and incubated with secondary antibodies for 1 h at RT (20 °C) after washing 3 times in TBS+0.05 %Tween-20 and developed by enhanced chemiluminescence (Bio-Rad) with Image Quant™ LAS 4000.
-
bioRxiv - Neuroscience 2021Quote: ... and equal protein amounts were boiled at 95°C for 10 minutes prior to being run on a gel (BioRad) at 120V ...
-
bioRxiv - Microbiology 2022Quote: ... as counterstain to denote stained areas and incubated at 37°C in a humidified chamber according to the manufacturer’s instructions (Bio-Rad kit 357-2112 ...
-
bioRxiv - Neuroscience 2022Quote: ... Samples were heated at 95°C for 5 minutes and loaded on 4-15% TGX gels (Bio-Rad, no. 4568083) in running buffer (25 mM Tris ...
-
bioRxiv - Cell Biology 2022Quote: ... Electrophoresis was performed for 21 h at 14°C in 0.9% (wt/vol) Pulse Field Certified Agarose (Bio-Rad Laboratories) in exactly 2.4L of 0.5x Tris-borate/EDTA buffer in a Rotaphor apparatus (Biometra ...
-
bioRxiv - Molecular Biology 2022Quote: ... The mixtures were incubated for 20 min at 37°C and loaded onto a Bio-Dot Microfiltration Apparatus (Bio-Rad) loaded with nitrocellulose (0.2 μm Amersham Protran ...
-
bioRxiv - Biochemistry 2022Quote: ... Lysates were centrifuged at 14,000g for 15 min at 4°C and supernatant protein concentrations were determined by Bradford assay (Bio-Rad).
-
Reducing mitochondrial ribosomal gene expression does not alter metabolic health or lifespan in micebioRxiv - Cell Biology 2022Quote: ... The solution was centrifuged 16,000g for 10 minutes at 4°C and the supernatant containing the mitochondrial or cell lysate proteins quantified (Bio-Rad DC Protein Assay ...
-
bioRxiv - Immunology 2022Quote: ... and read fluorescence for 45 seconds at 60°C using the CFX384 Touch Real-Time PCR Detection System (Bio-Rad). The expression levels for each gene were then calculated per the 2-ΔΔCT equation [25].
-
bioRxiv - Genetics 2022Quote: ... Approximately 43µl of the newly formed droplet solution were transferred into a ddPCR 96-well plate and then sealed at 180°C for 5 seconds in the PX1 PCR Plate Sealer (BioRad). PCR was carried out with the following conditions ...
-
bioRxiv - Molecular Biology 2023Quote: ... PCR was achieved in 12 cycles and at optimized melting temperature (tm) of 68.2 °C thorough C1000 touch thermal cycler (Bio-rad). For single stranded PCR product (ssPCRP ...
-
bioRxiv - Microbiology 2024Quote: Protein samples were incubated at 95°C for 10 minutes before being resolved on TGX Stain-free gels (Bio-Rad). The proteins were transferred onto 0.2 μm nitrocellulose membranes using Trans-Blot Turbo Transfer (Bio-Rad) ...
-
bioRxiv - Neuroscience 2022Quote: ... Regional lysates were centrifuged at 21,000 x g for 20 minutes at 4 °C and the supernatant was removed and suspended in 4X laemmli buffer (BioRad) with 2-mercaptaethanol (BioRad ...
-
bioRxiv - Synthetic Biology 2022Quote: ... All reagents except the double-stranded beacon were first assembled in a total volume of 9 μL and run at 37 °C in a CFX96 real-time PCR detection system (Biorad). Both WT SpCas9 and SpCas9-NG are highly active at this temperature ...
-
bioRxiv - Molecular Biology 2022Quote: ... The reaction mixtures were held at 10°C until the PCR tubes were removed from the thermocycler (C1000 Touch, BioRad). After ...
-
bioRxiv - Molecular Biology 2022Quote: ... The plates were incubated at 30°C and pictures were taken with the setting “Blots: Colorimetric” using a ChemiDoc (BioRAD).
-
bioRxiv - Cell Biology 2022Quote: ... PIK3CA c.1633G>A (p.E545K) and PIK3CA c.1624G>A (p.E542K) point mutations were performed on the QX200 ddPCR system (Bio-Rad Laboratories) by using PrimePCR ddPCR Mutation assays according to manufacturer’s instructions (Bio-Rad Laboratories) ...
-
bioRxiv - Developmental Biology 2022Quote: ... Protein lysates in Laemmli buffer were separated by electrophoresis on 12% SDS-PAGE gels and transferred for 2 hours at 4°C on to a PVDF membrane (BioRad). After blocking for an hour in 5% dry milk ...
-
bioRxiv - Biochemistry 2024Quote: ... The samples were heated from 35 °C to 79°C at a rate of 0.3 °C per 15 s in a CFX96 Touch Real-Time PCR Detection System (Bio-Rad). Fluorescence intensity was determined using excitation (λem=525/20 nm ...
-
bioRxiv - Bioengineering 2024Quote: ... The proteins were incubated for one hour at 65 and 70°C in a thermocycler with heated lid (T100, BioRad) Binding to D25 and MPE8 antibodies was measured afterwards following the protocol described above.
-
bioRxiv - Bioengineering 2024Quote: ... Samples in 8-well tubes were heat-shocked for three minutes at 72 °C (C1000 Touch Thermal Cycler, Bio-Rad), placed on wet ice for two minutes ...
-
bioRxiv - Cell Biology 2024Quote: ... eluate was incubated at 70 °C then run on 4-12% NuPAGE gell and transferred to LF PVDF membrane (BioRad). Western-blot analysis were done with the next antibodies ...
-
bioRxiv - Physiology 2023Quote: ... Protein extracts were denatured at 95 °C for 10 min and separated on 10% SDS-PAGE gels (1610156, Bio-Rad) at 80 V for ∼40 min followed by 110 V for ∼70 min ...
-
bioRxiv - Microbiology 2024Quote: ... 7.5 mg of proteins was diluted in ChIP buffer supplemented with 0.01% SDS and precleared for 1 hr at 4°C with 50 μl of SureBeads Protein A Magnetic Beads (BioRad) and 100 μg bovine serum albumin (BSA) ...
-
bioRxiv - Cancer Biology 2024Quote: ... Membranes were blocked with 5% non-fat dry milk and incubated with primary antibodies overnight at 4 °C and then incubated with host species-matched HRP-conjugated secondary antibodies (BioRad) for 1 hour at room temperature ...
-
bioRxiv - Molecular Biology 2024Quote: ... 95 °C) and 1.25 µg sample was resolved on a 4-12% acrylamide Criterion XT Bis-Tris gel (Bio-Rad) in MOPS buffer at 100 V for 20 min and subsequently at 150V for 190 min on ice along with PageRuler™ Plus Prestained Protein Ladder (Thermo Scientific ...
-
bioRxiv - Molecular Biology 2024Quote: ... 0.01% bromophenol blue) and denaturated 5 min at 95°C before protein separation by SDS–PAGE on 4-15% precast gels (Biorad).
-
bioRxiv - Microbiology 2024Quote: ... the samples were boiled at 95°C for 10 minutes and resolved on a TGX stain-free gel (Bio-Rad) for SDS-PAGE analysis ...
-
bioRxiv - Molecular Biology 2024Quote: ... and heat denatured at 95°C for 10 min before loading onto a 4-15% Tris-glycine gel (Bio-Rad) and electrophoresed at 125 V ...
-
bioRxiv - Neuroscience 2024Quote: ... Samples were denatured for 10 minutes at 70°C and proteins were separated (55min, 200V) on a Midi 4-12% Bis-Tris gel (BioRad) in 1x MOPS buffer (BioRad ...
-
bioRxiv - Microbiology 2023Quote: ... cells and plasmids in 10% glycerol were first heat-shocked at 56°C for 2 min followed by immediate electroporation in 0.1-cm cuvette (Bio-Rad) using electroporation program of 2.5 kV and time constant of 2.3-2.5 ms on the Bio-Rad Micropulser ...
-
bioRxiv - Immunology 2024Quote: 96-well flat-bottom NUNC Maxisorp plates were coated overnight at 4 °C with 0.5 mg/mL recombinant HBsAg (BIO-RAD). Plates were washed with PBS/T ...
-
bioRxiv - Genetics 2024Quote: ... chromosomal DNA was prepared in 1.3% of low-melting point agarose plugs as described in 74 and run at 14 °C with 1X TBE buffer in a CHEF DR-III apparatus (BioRad) using the field 6V/cm at a 120°angle for 48 h ...