Labshake search
Citations for Bio-Rad :
2301 - 2350 of 3002 citations for 9 10 12 13 tetrahydroxyoctadecanoic acid since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2022Quote: ... Cell equivalents of ~1.5×106 cells per lane were separated by 10% SDS-PAGE along with the Precision Plus Protein Kaleidoscope standard (BioRad). The fractionated proteins were transferred to a PVDF membrane ...
-
bioRxiv - Cell Biology 2022Quote: ... in phosphate-buffered saline (PBS) for 10 min and permeabilized with 0.15% (v/v) Triton X-100 (#1610407, Bio-Rad) in PBS for 2 min ...
-
bioRxiv - Neuroscience 2024Quote: ... Slices were then incubated eMAP hydrogel monomer solution (30% acrylamide [A9099, MilliporeSigma, St. Louis, MO, USA], 10% sodium acrylate [408220, MilliporeSigma], 0.1% bis-acrylamide [161-0142, Bio-Rad Laboratories ...
-
bioRxiv - Bioengineering 2024Quote: ... in 20 µL reaction mixtures containing 10 µL of SsoAdvanced™ Universal SYBR Green Supermix (Bio-Rad, Hercules, CA, USA), 300 nM of each primer ...
-
bioRxiv - Microbiology 2024Quote: ... Blots were washed 4 × 10 min with TBST and then visualized by enhanced chemiluminescence using the Clarity Max (Bio-Rad) substrate.
-
bioRxiv - Microbiology 2024Quote: ... The membrane was washed 3x with 10 mL of TBS-T and developed with Clarity Max ECL substrate (Bio-Rad). Western blot images were taken with an Azure Biosystems C400 imager.
-
bioRxiv - Microbiology 2024Quote: ... the samples were boiled at 95°C for 10 minutes and resolved on a TGX stain-free gel (Bio-Rad) for SDS-PAGE analysis ...
-
bioRxiv - Molecular Biology 2024Quote: ... and heat denatured at 95°C for 10 min before loading onto a 4-15% Tris-glycine gel (Bio-Rad) and electrophoresed at 125 V ...
-
bioRxiv - Neuroscience 2024Quote: Samples (8–25 μg protein extract) were run on 8–10% acrylamide gel at 100 Volt in Running Buffer (1X Tris–Glycine-SDS, Biorad) together with Precision Plus Protein Dual Color Standards (Biorad) ...
-
bioRxiv - Neuroscience 2024Quote: ... The lysates were then chilled briefly on ice and then loaded onto a Stain-Free mini-protean 10 well pre-cast gel (BioRad) and mini-protean tank (BioRad ...
-
bioRxiv - Cell Biology 2024Quote: ... 30µg of total proteins were loaded onto each well of Mini-PROTEAN TGX Stain-Free Precast Gels (10%, Biorad, # 4568031), and migrated for 45 min at 120 Volts ...
-
bioRxiv - Cell Biology 2023Quote: ... Proteins were run on a 10% SDS-PAGE gel (30μg/lane) and transferred using a semi-dry blotting system (Trans-Blot Turbo system, Bio-Rad) for 10 minutes at 25V ...
-
bioRxiv - Biochemistry 2024Quote: ... denatured for 10 min at 96°C before it was separated at a 4-20 % PROTEAN TGX stain-free gel (BioRad) at 200 V for 30 min ...
-
bioRxiv - Biophysics 2024Quote: ... The beads were resuspended in the remaining 10 % of supernatant and transferred to 25 mm diameter gravity flow columns (Biorad). The beads were allowed to settle before the remaining buffer was drained and the beads were then washed with 12 CV of Buffer B (20 mM HEPES-KOH pH 7.5 at 20 °C ...
-
bioRxiv - Microbiology 2024Quote: ... DNA was recovered by resuspending the magnetic beads in 100 uL 10% w/v Chelex 100/dH20 suspension (Bio-Rad) and boiling the mixture for 10m ...
-
bioRxiv - Genetics 2023Quote: ... Input gel samples were taken before addition of HA beads: 30 μL of lysate was added to 10 μL 4X Laemmli sample buffer (BioRad) and boiled at 95°C for 5 minutes.
-
bioRxiv - Cell Biology 2023Quote: ... Membranes were washed 3x in TBST for 10 minutes/each and imaged with ECL Prime (Amersham) using ChemiDoc MP imaging system (BioRad). Total protein was visualized using Ponceau S stain (Sigma-Aldrich).
-
bioRxiv - Genomics 2023Quote: ... Each ddPCR reaction was set up by adding the following: 10 uL of 2X ddPCR Supermix (no dUTP; BioRad #1863023), 2 uL of 10 uM ITR_Forward Primer ...
-
bioRxiv - Immunology 2023Quote: ... and these blots were blocked with PBST (phosphate-buffered saline, 0.1% Tween-20) with milk (10% w/v, nonfat dry milk, Bio-Rad) for one hour at room temperature ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... amoebiformis CCMP2058 cells were transformed with 10 μg of the plasmid using a Gene Pulser Xcell electroporation system (Bio-Rad), as described previously (Fukuda et al ...
-
bioRxiv - Plant Biology 2024Quote: ... prior to bombardment with 10 mg 1 μm tungsten beads treated with 5 μg purified plasmid DNA in a Helios gene gun (BioRad) at 1,550 PSI ...
-
bioRxiv - Developmental Biology 2023Quote: ... 10-20 µg/lane total protein was electrophoresed on 4–15% Mini-PROTEAN® TGX™ Precast Protein Gels (BioRad) with SDS running buffer and transferred to Polyvinylidene difluoride (PVDF ...
-
bioRxiv - Microbiology 2023Quote: ... Protein preps were boiled for 5 minutes and then separated by SDS-PAGE on a 10-20% Tris-Gycine gel (BioRad). Proteins were electro-transferred from gels to nitrocellulose membranes ...
-
bioRxiv - Neuroscience 2023Quote: ... 15 μg of total protein per sample was loaded into separate lanes on a precast 10–20% electrophoresis gel (Tris-HCl polyacrylamide, BioRad). The blotRig software helps counterbalance sample positions across the gel by treatment condition. ...
-
bioRxiv - Developmental Biology 2023Quote: ... beads were washed three times with washing buffer and incubated for 10 min with 2x Laemmli-sample buffer (Bio-Rad). The elution step was performed twice ...
-
bioRxiv - Plant Biology 2023Quote: ... The temperature ramp rate was 1°C/20 s and protein unfolding was monitored by the increase in RFUs produced every 10 s in a CFX Opus 96 System (BioRad). The average trace of 6 replications (2 at each concentration ...
-
bioRxiv - Biophysics 2023Quote: ... 100 μl aliquots of the PlyCB CBD in PBS were heated for 10 min in a gradient thermocycler (MyCycler, BioRad) at temperatures ranging from 25 to 90°C ...
-
bioRxiv - Bioengineering 2023Quote: ... cell-seeded scaffolds were transferred into a new well and 200μL of fresh media containing 10% Alamar blue (cat. BUF012A Bio-Rad) was added to each scaffold ...
-
bioRxiv - Cancer Biology 2023Quote: ... KM12 or HCT116 cells (10 million) along with the spike-in control (20%) were carefully resuspended in cell suspension buffer (BioRad). The resultant homogeneous single-cell suspensions were embedded in agarose and transferred into plug molds (Bio-Rad CHEF Mammalian Genomic DNA plug kit) ...
-
bioRxiv - Plant Biology 2023Quote: ... The protein samples were separated on 10% SDS-polyacrylamide gels and separated proteins were transferred on to nitrocellulose membrane (BIORAD) for immunodetection ...
-
bioRxiv - Plant Biology 2023Quote: ... HA-tagged proteins were detected using primary antibody anti-HA (1/10 000) followed by incubation with the HRP-conjugated secondary antibody and finally revealed by chemiluminescence (Clarity Western ECL, Biorad) on a Fusion-FX imager (Vilber).
-
bioRxiv - Plant Biology 2023Quote: ... Ten micrograms of denatured microsomal proteins were separated by SDS-PAGE using 10% polyacrylamide gel (Mini-PROTEAN TGX precast gel, Biorad) and tris/glycine buffer ...
-
bioRxiv - Molecular Biology 2023Quote: ... Each qPCR Real-time reaction was carried out in a total volume of 10 µL with 20 ng of cDNA using SYBR-Green PCR Master Mix (BioRad) and an iCycler IQ Real-time PCR System (Bio-Rad) ...
-
bioRxiv - Molecular Biology 2023Quote: ... Obtained samples were denatured in a 1xLaemmli buffer at 95°C for 10 min and proteins separated using electrophoresis on a 4-15% mini-protean-TGX-precast-gel (BioRad). Proteins were then transferred on nitrocellulose membranes by a semi-dry method using transblot turbo transfer system (BioRad) ...
-
bioRxiv - Molecular Biology 2023Quote: ... Proteins were then separated on 10-20% SDS-polyacrylamide gels and were visualized by staining with Coomassie blue (Bio-Rad).
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... 10% (w/v) Tween 20 and 20% (v/v) sodium dodecyl sulfate (SDS) were purchased from Biorad (Richmond, CA, USA). Absolute ethanol ...
-
bioRxiv - Physiology 2023Quote: ... PCR reactions were run in a 384-well format with 10 μL reaction mixture containing SYBR Green I Master (Biorad) (5 μL) ...
-
bioRxiv - Biochemistry 2023Quote: ... The lysates were pelleted at 10,000 g for 10 min and the supernatants were used to determine the protein concentration using Bradford assay (Bio-Rad). After a preclearing step with Protein G Sepharose (Sigma) ...
-
bioRxiv - Biochemistry 2023Quote: ... expression media samples were diluted with 2X reducing SDS sample buffer at 1:1 ratio and the mixture was loaded on a 10-well 4–20% SDS-PAGE gradient gel (BioRad). Image J software was used to quantify the signal compared to the negative control (mock transfected culture) ...
-
bioRxiv - Neuroscience 2023Quote: ... using pre-treated (95°C for 10 min to reduce adherence) PCR tubes and optical flat caps (Bio-rad, Belgium). The final reaction volume was 20 µL (10 µM of miniMeCP2 or 20 µM of miniMeCP2T158M) ...
-
bioRxiv - Cancer Biology 2022Quote: ... The reaction for ddPCR Copy Number Variation Assay was set up in 20 μl sample volume containing 10 μl of 2X ddPCR Supermix (no dUTP, BioRad), 1 μl of FAM-labeled target primers/probe (BioRad) ...
-
bioRxiv - Biochemistry 2023Quote: Proteins were separated by SDS-PAGE on 10% gels (20 μg protein/lane) and transferred to PVDF membrane (Bio-Rad) for 20 min at 0.1 A ...
-
bioRxiv - Biochemistry 2023Quote: Proteins were separated by SDS-PAGE on 10% gels (20 µg protein/lane) and transferred to PVDF membrane (Bio-Rad) for 20 min at 0.1 A ...
-
bioRxiv - Cancer Biology 2023Quote: ... 30-50 µg of nuclear proteins were loaded onto a 10% SDS-PAGE and transferred on nitrocellulose membrane using TransBlot apparatus (BioRad). Membranes were subsequently incubated with TBS Tween-20® 0.01% ...
-
bioRxiv - Cell Biology 2023Quote: ... samples were run on 7.5 or 10 % polyacrylamide gel and transferred using Trans-Blot Turbo Mini-nitrocellulose Transfer packs (Bio-Rad) on a Trans-Blot Turbo apparatus ...
-
bioRxiv - Cancer Biology 2023Quote: ... Lysates (35 µg protein) were run on 10% SDS-polyacrylamide gels and transferred to a nitrocellulose membranes (Bio-Rad, 1620115). After blocking for 10 min with 5% nonfat dried milk in PBS with 0.05% Tween-20 (Sigma-Aldrich ...
-
bioRxiv - Genetics 2023Quote: ... The 20 μl copy number reaction mix consisted of 10 μl of 2x ddPCR SuperMix for Probes (Bio-Rad Laboratories), 1 μl of the Copy Number target assay (labeled with FAM) ...
-
bioRxiv - Cell Biology 2023Quote: ... phosphorylated in vitro by PLK-1 or CyclinB-Cdk1 as described (7) were separated on stain Free SDS-PAGE 10% gel (Biorad). The gel was imaged and then transferred to a PVDF membrane 0.45 µm during 1h30 at 90V ...
-
bioRxiv - Immunology 2023Quote: ... eluted proteins were run on 10% polyacrylamide gels and transferred to polyvinylidene fluoride (PVDF) membranes (Trans-Blot Turbo Transfer System, BioRad). Membranes were blocked with 5% milk in Tris-buffered saline (TBS ...
-
bioRxiv - Physiology 2023Quote: ... Proteins were denatured in Laemmli buffer and separated on 10% SDS-PAGE gels and transferred to PVDF membranes (Bio-Rad). The membranes were blocked with blocking buffer for 1 h in TBST containing 5% BSA or 5% milk ...