Labshake search
Citations for Bio-Rad :
751 - 800 of 1524 citations for 3 Chloro 2 Trimethylsiloxypropene since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2020Quote: ... Membranes were washed again 3 times for 20 minutes and then developed using the BioRad imaging system (BioRad, Hercules, CA, USA).
-
bioRxiv - Plant Biology 2021Quote: ... Quantitative RT-PCR was performed with gl3 specific primers (Supplemental Table 3) and iQ™ SYBR® Green Supermix (BioRad, USA) and conducted on a BioRad CFX with 96-well reaction blocks under the following PCR conditions ...
-
bioRxiv - Microbiology 2020Quote: ... followed by ExtrAvidin alkaline phosphatase conjugate and alkaline phosphatase substrate: p-nitro blue tetrazolium chloride enhanced 5-bromo-4chloro-3-indolyl phosphate (Bio-Rad). The membranes with the transferred rgp120 were incubated with the HRP-conjugated V5 antibody (Invitrogen ...
-
bioRxiv - Cell Biology 2021Quote: ... the membranes were washed 3 times for 5 min and incubated with the secondary antibodies (1:10000, IgG-HRP, Bio-Rad) for 45 min at RT ...
-
bioRxiv - Molecular Biology 2022Quote: ... 5’-ATG GGT TCG CAT GGT CCT AAT GAC ACA C-3’) (Cousineau et al., 2022) and the GAPDH loading control (PrimePCR Probe assay with HEX probe, Bio-Rad). Each 20 µL reaction contained 500 ng of total RNA ...
-
bioRxiv - Plant Biology 2022Quote: ... RNA electrophoresis was performed at 200 V for 1 h and then RNA was transferred to a nylon membrane using MiniProtean 3 system (BioRad, USA). Transfer conditions were 100 V for 1 h at 4 °C in TBE buffer 1 × ...
-
bioRxiv - Microbiology 2022Quote: ... Beads were washed 3 times in PBS and eluted in 40 μL 2X Laemmli Buffer with 1:20 β-mercapto-ethanol (BioRad) at 95°C for 5 minutes ...
-
bioRxiv - Genetics 2022Quote: ... Membranes were washed 3 times for 10 min in PBST before detection using Clarity Western ECL Substrate (Bio-Rad 170-5061) and imaging on a ChemiDoc MP (Bio-Rad 17001402).
-
bioRxiv - Bioengineering 2022Quote: Samples were washed in PBS and fixed in 3% paraformaldehyde (PFA) for 15 minutes at room temperature (RT) and permeabilized by 0.5% Triton x-100 (Bio-Rad, USA) for 10 minutes ...
-
bioRxiv - Immunology 2020Quote: ... Samples were heated at 95°C for 3 minutes and run on a 8 – 16% or 4 – 20% TGX-Criterion gel (Bio-Rad). The separated proteins were transferred to PVDF membranes and blocked in PBS containing 0.2% fish skin gelatin (Sigma-Aldrich ...
-
bioRxiv - Neuroscience 2020Quote: ... Specific primers against the genes of interest (Table 3) were designed and qPCR was performed to amplify the genes of interest using the CF96X Real Time System (BioRad, USA). The qPCR data were analyzed using the ΔΔCt method as described previously150 ...
-
bioRxiv - Cell Biology 2021Quote: ... 1 ml of supernatant was diluted with 3 ml of distilled H2O and applied to freshly prepared Dowex columns (AG1-X8; Bio-Rad). Columns were washed twice with distilled H2O ...
-
bioRxiv - Developmental Biology 2022Quote: ... antibody-bead complexes were washed 3 times with lysis buffer before eluting the samples by boiling for 10 minutes in 4x loading dye (Bio-Rad) containing 10% β-mercaptoethanol ...
-
bioRxiv - Microbiology 2020Quote: ... Samples were checked for purity and presence of protein using 15% SDS-PAGE (Polyacrylamide gel electrophoresis, Mini Protean 3 System, Bio-Rad) and Coomassie Brilliant Blue (Merck ...
-
bioRxiv - Microbiology 2020Quote: ... the capped full-length RNA and IBV-N transcripts dissolved in 400 μl PBS were co-transfected into Vero cells by electroporation (450 v, 50 μF, 3 mSec, GenePulser Xcell, BIO-RAD). After 48 h ...
-
bioRxiv - Synthetic Biology 2021Quote: ... microwells containing assembled protocell arrays were all incubated at 37 °C for 3 hours before imaging on a ChemiDoc MP (Bio-Rad) imaging system ...
-
bioRxiv - Immunology 2021Quote: ... pooled and subjected to two consecutive preparative isoelectric focusing (IEF) at pH 3-10 (first separation) and pH 5-7 (second separation) using a Rotofor Cell (Bio-Rad). The individual IEF fractions were harvested ...
-
bioRxiv - Immunology 2020Quote: ... Samples were boiled for 3 min and sonicated for 30 s prior to loading on 4-20% Mini-PROTEAN TGX precast protein gels (Bio-Rad) and electrophoresis in Tris-glycine buffer ...
-
bioRxiv - Immunology 2020Quote: ... the cells were divided into 100 μl aliquots and heated individually at different temperatures for 3 minutes (Thermal cycler, BIO-RAD) followed by cooling for 2 minutes at room temperature ...
-
bioRxiv - Biochemistry 2021Quote: ... and the sample was heated to 90°C for 5 minutes before loading of 3 pmol onto a 4-15% Mini-PROTEAN TGX Stain-Free Precast Gel (Bio-Rad), alongside PageRuler Prestained Protein Ladder (Thermo Scientific) ...
-
bioRxiv - Biochemistry 2021Quote: ... run with radioactive sample for 15 min at 200 V, dried (80°C, 3 hours) on a gel dryer (Bio-Rad), and exposed to a phosphor screen ...
-
bioRxiv - Molecular Biology 2020Quote: ... Plates were incubated in the dark for 3 days at 30°C and then photographed in a Gel Doc XR+ (Bio-Rad).
-
bioRxiv - Immunology 2021Quote: ... Beads were washed 3 times with ice cold nondenaturing lysis buffer and boiled in 4x Laemmli Sample Buffer (Bio-Rad, #1610747) for 10 mins ...
-
bioRxiv - Immunology 2020Quote: ... 6µg of Round or Rod-shaped CCMVTT-VLPs were mixed with 2x mercaptoethanol and heated at 95°C for 3 minutes and then loaded into Any kD Mini-PROTEAN TGX precast protein gels (BIO-RAD). Gel was run for 35min at 180V ...
-
bioRxiv - Cell Biology 2021Quote: ... were incubated in TBS-T/milk for 45 min and washed 3 × 5 min with TBS-T before detecting using a Chemidoc imager (Bio-Rad). NearIR-conjugated secondary antibodies (LI-COR Biosciences ...
-
bioRxiv - Biochemistry 2022Quote: ... Dialysis was repeated against another 1 L of low-salt buffer for 3 h before application to a MonoQ (MonoQ HR 10/10, Pharmacia) FPLC column (Biologic Duoflow system, Bio-Rad). The sample was eluted over 80 mL in 20 mM piperazine by applying a gradient from 0% to 30% of a high-salt buffer (20 mM piperazine ...
-
bioRxiv - Microbiology 2023Quote: ... The gel was run at 125 V for 3 to 4 hours and the RNA was then transferred to a Zeta-Probe GT membrane (Bio-Rad) by capillary action with 20 x SSC buffer (3 M NaCl ...
-
bioRxiv - Cancer Biology 2023Quote: ... Membranes were washed a further 3 times in TBS-T and bound antibodies were visualised using the Clarity Western ECL substrate (BioRad; #1705061) with a ChemiDoc MP system (BioRad) ...
-
bioRxiv - Biochemistry 2023Quote: ... The slurry was gently stirred for 3 h to allow binding and then loaded into a glass Econo-Column (Bio-Rad). The column was washed with 10 Column Volumes (CV ...
-
bioRxiv - Molecular Biology 2022Quote: ... using 10 mM CAPS buffer (3-[cyclohexylamino]-1-propanesulfonic acid [pH 11]) in a Mini Trans-Blot Electrophoretic Transfer Cell tank (Bio-Rad) according to protocol provided by the manufacturer ...
-
bioRxiv - Molecular Biology 2022Quote: ... membranes were washed in 1X PBS with 0.1% Tween 3 times for 5 minutes each before scanning using the ChemiDoc™ MP Imaging System (Bio-Rad). Note ...
-
bioRxiv - Molecular Biology 2022Quote: ... The 10 µL cDNA reaction was diluted to 200 µL and 3 µL was used with iTaq Universal SYBR Green Supermix (Bio-Rad) and 670 nM of primer pairs (Table S4 ...
-
bioRxiv - Molecular Biology 2022Quote: ... The resulting products were analyzed on a 3% agarose gel stained with ethidium bromide and visualized using ChemiDoc XRS+ (Bio-Rad). The relative amounts of the resulting products were analyzed by scanning the gels and determining the intensities of ethidium bromide stained bands using Image Lab software Version 1.36b (Bio-Rad) ...
-
bioRxiv - Developmental Biology 2022Quote: ... RNA from individual cells were barcoded and libraries prepped according to the 10X chromium version 3 chemistry using the C1000 Touch thermal cycler (Bio-Rad). Quality of prepped cDNA and resultant libraries were assessed with the Agilent 2100 Bioanalyzer ...
-
bioRxiv - Cell Biology 2022Quote: ... Cells were grown at 30°C for 3-6 days and images captured using a Chemidoc XRS+ imager (BioRad, Hercules, CA). All images were evenly adjusted in Photoshop (Adobe Systems Incorporated ...
-
bioRxiv - Molecular Biology 2024Quote: ... then incubated with ProSignal Pico Spray chemiluminescence substrate (Prometheus) for 1-3 minutes at room temperature and imaged using a ChemiDoc Imaging System (Bio-Rad). Contrast was occasionally adjusted to improve visualization of bands ...
-
bioRxiv - Molecular Biology 2024Quote: ... the membranes were washed 3 times for 10 minutes each and then developed with the Clarity or Clarity Max ECL Western Blotting Substrates (Bio-Rad). The chemiluminescence detection was performed using the Chemidoc MP system (Bio-Rad ...
-
bioRxiv - Cell Biology 2023Quote: ... Membranes were then exposed to the ECL substrate kit (Pierce 34850 and 34095) for 3 minutes before imaging with the ChemiDoc Touch Imaging System (Bio-Rad).
-
bioRxiv - Bioengineering 2023Quote: ... This step was repeated for 3 times and the samples were concentration-matched at OD500nm = 10 and mixed 1:1 with 2x Laemmli buffer (Bio-Rad), containing SDS and 2-mercaptoethanol ...
-
bioRxiv - Immunology 2023Quote: ... 10 µg of RNA was transfected into 4×10^6 S10-3 cells by electroporation with a Gene Pulser II apparatus (Bio-Rad) in 0.4 cm Gene Pulser cuvettes (Bio-Rad ...
-
bioRxiv - Biophysics 2023Quote: ... Gels were run on ice at 140V for 3 hours using Bio-Rad Mini-Protean TGX precast gels in 1X Tris/Gly/SDS running buffer (BioRad #1610732). Gels were then equilibrated with transfer buffer (BioRad #1610734 ...
-
bioRxiv - Synthetic Biology 2023Quote: ... The membrane was washed 3 times with TBST for 5 min each and then the membrane was incubated with Clarity Western ECL Substrate (Bio-Rad) for 2 min before exposure to film and development in a darkroom.
-
bioRxiv - Biochemistry 2022Quote: ... Enzyme purity and molecular weight were estimated by 12 % SDS-PAGE using mini-PROTEAN 3 system (BioRad, Hercules, California, United States). Gels were stained using PageBlue Protein Staining Solution (Thermo Fisher Scientific ...
-
bioRxiv - Cancer Biology 2022Quote: ... A total of 3-4 μg of total RNA was reverse transcribed using the iScript advanced cDNA synthesis kit (Bio-Rad). Quantitative PCR of target genes (Table 1 ...
-
bioRxiv - Cell Biology 2022Quote: ... and 110 V for additional 2.5-3 h) and transferred to a nitrocellulose membrane overnight (~16 h) at 15 V using the Bio-Rad Transblot (Bio-Rad). Membranes were blocked in 5% fat-free milk in Tris buffered saline with Tween-20 (TBST ...
-
bioRxiv - Genomics 2022Quote: ... and incubated at 65°C for 3 mins before running 1% agarose-Etbr gel electrophoresis to detect the cleavage efficiency by ChemiDoc system (Bio-Rad).
-
bioRxiv - Immunology 2022Quote: ... then blocked for 1 to 3 hr at RT with 50 μL/well of blocking buffer (HN: 5% Blotting Grade Blocker, Bio-Rad cat ...
-
bioRxiv - Immunology 2022Quote: ... were amplified by PCR using 5’ and 3’ primers with overhangs containing T7 binding sites using iProof High-Fidelity Taq (Bio-Rad). PCR reaction products were run on an agarose gel to check for the correct amplicon ...
-
bioRxiv - Zoology 2022Quote: ... sfRNA and 3’UTR were quantified together by RT-qPCR using the iTaq Universal Sybr green one-step kit (Bio-Rad) with primers previously designed [26] ...
-
bioRxiv - Molecular Biology 2023Quote: ... LAMP reaction products were analysed on 2% agarose gels (65V for 3 hr) stained with ethidium bromide (10 mg/mL) and viewed on Gel Doc XR Imaging System (BioRad, USA).