Labshake search
Citations for Bio-Rad :
451 - 500 of 1046 citations for Lupatadine fumarate EP Impurity C since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2021Quote: ... The supernatant from the cell lysate was collected by centrifuging the cell lysate at 10,000 g for 10 min at 4°C and further diluted in lysis buffer to 8.0 ug/ul using a modified Bradford protein quantification assay (Bio-Rad), flash-frozen in liquid N2 ...
-
bioRxiv - Cell Biology 2022Quote: ... using the BioRad transfer system at 100 V for 60 min at 4°C or with Trans-Blot Turbo Mini PVDF Transfer Packs using Trans-Blot Turbo Transfer System (Biorad). The membrane was blocked for 30 min with the Odyssey Blocking Buffer (TBS ...
-
bioRxiv - Biophysics 2021Quote: ... The lysate was centrifuged at 30,000 x g for 30 min at 4°C before being loaded into a gravity flow column (Bio-Rad) and purified by Ni-NTA resin (UBP Bio ...
-
bioRxiv - Genetics 2021Quote: ... temperature of hybridization 61°C) and fluorescent intensity was measured in a QX100 Droplet Reader (Bio-Rad Laboratories, Hercules, CA) and the signal data was analysed using QuantaSoft Analysis Pro (1.0.596 ...
-
bioRxiv - Genetics 2021Quote: ... rotated at 4°C for 2h and then poured into a Econo-Column® Chromatography column (Bio-Rad, Hercules, CA). After extensive washing first with 80 mL of 20 mM Tris HCl [pH8@4°C] ...
-
bioRxiv - Microbiology 2021Quote: ... The plates were incubated at 30 °C and pictures were taken every day with the setting “Blots: Colorimetric” using a ChemiDoc (BioRAD).
-
bioRxiv - Genetics 2020Quote: ... The reaction was incubated at 37°C for 15 min and stopped by the addition of 10 μl of TBE-UREA-sample buffer (BioRad). The samples were analysed on a 15% denaturing polyacrylamide gel in 1 × TBE buffer.
-
bioRxiv - Molecular Biology 2020Quote: ... 95°C), and run (loaded in 2 wells, 20 μL per well) on a 10 well 10% TBE-urea gel (Biorad) (200 V ...
-
bioRxiv - Molecular Biology 2020Quote: ... 2.5 mg/ml Orange G), denatured (2 min, 80°C) and run on a 10 well 10% TBE-urea gel (Biorad) (200 V ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysate was centrifuged at 30,000 x g for 30 min at 4 °C before being loaded into a gravity flow column (Bio-Rad) and purified by Ni-NTA resin (UBP Bio ...
-
bioRxiv - Bioengineering 2021Quote: ... The cell pellet was re-suspended in 10mL of fresh culture media (37°C) and cells density was calculated with a TC20 automated cell counter (BioRad). 100’000 to 150’000 cells were plated per 35mm glass-bottom dish and transfected the following day ...
-
bioRxiv - Bioengineering 2020Quote: ... NJ) overnight at 4°C and visualized using the Bio-Rad ChemiDoc MP Imaging System (Bio-Rad Laboratories, Hercules, CA).
-
bioRxiv - Biochemistry 2021Quote: ... pH 5.3 (murine P-domains) or pH 7.3 (GII.4 Saga P-domain) at 4 °C via Micro Bio-Spin 6 columns (Bio-Rad) according to the manufacturer’s protocol ...
-
bioRxiv - Biochemistry 2020Quote: ... Reactions were incubated for 15 min at 30 °C and then applied to a Bio-Gel A-1.5m (Bio-Rad) resin packed in a 0.7×15cm Flex-Column (Kimble) ...
-
bioRxiv - Neuroscience 2021Quote: MV pellets were sonicated three times for 10 s at 20 Hz (Vibra cell VCX130) in 2% SDS and heated at 56°C in Laemmli loading buffer (Biorad). The protein content was measured using the Pierce 660 nm protein assay kit (Thermo Scientific ...
-
bioRxiv - Cell Biology 2021Quote: ... 25 µg of protein lysate was heat-denatured at 95°C for 5 minutes in Laemmli sample buffer (Bio-Rad), and then separated using a 4 to 12% Bis-Tris polyacrylamide gel (Invitrogen ...
-
bioRxiv - Cell Biology 2021Quote: ... Extracts were stored at -20°C or immediately resolved on an 7.5% SDS-PAGE pre-cast gel (Bio-Rad, #4568023) and transferred onto a 0.2 μm nitrocellulose membrane (GE healthcare ...
-
bioRxiv - Biochemistry 2021Quote: ... with or without a C-terminal FLAG™-tag followed by a foldon trimerization domain and an octahistidine tag was heated to 95 °C in XT sample buffer (Biorad) for 5 minutes ...
-
bioRxiv - Microbiology 2020Quote: Steady-state equilibrium binding of post-vaccination rabbit polyclonal serum was monitored at 25°C using a ProteOn surface plasmon resonance (BioRad). The purified recombinant Spike proteins were captured to a Ni-NTA sensor chip with 200 resonance units (RU ...
-
bioRxiv - Neuroscience 2020Quote: ... The mixtures were incubated at 37°C in micro PCR tubes on a thermal cycler (BioRad DNA Engine PTC-200). At the indicated time points ...
-
bioRxiv - Neuroscience 2020Quote: ... 15 min at +4°C) and the supernatant was used to measure the protein concentrations using the Lowry method (Biorad DC protein assay ...
-
bioRxiv - Biophysics 2020Quote: ... before being transferred to Whatman 3 MM paper and dried (50°C, 2 hours) using a gel dryer (Model 583, BioRad) attached to a vacuum pump ...
-
bioRxiv - Developmental Biology 2022Quote: Cells in monolayer were fixed in 4% PFA for 20 minutes at 4°C and blocked for 30 minutes in 10% donkey serum (BioRad) and 0,1% Triton X-100 (Sigma-Aldrich) ...
-
bioRxiv - Microbiology 2022Quote: ... 7.5 mg of proteins was diluted in ChIP buffer supplemented with 0.01% SDS and precleared for 1 h at 4 °C with 50 μl of SureBeads Protein A Magnetic Beads (BioRad) and 100 μg bovine serum albumin (BSA) ...
-
bioRxiv - Microbiology 2022Quote: ... Lysates were centrifuged for 15 min at 10,000 x g at 4 °C and supernatants were collected for protein quantification using the Quick start Bradford protein assay kit 2 (Biorad). Samples were mixed with Laemmli buffer (Biorad ...
-
bioRxiv - Biochemistry 2022Quote: ... for 20 min at 4 °C) protein concentrations in supernatants collected were determined using a Bradford protein assay (Bio-Rad). Remaining supernatants were mixed with sample buffer at 3:1 v /v ratio ...
-
bioRxiv - Microbiology 2022Quote: ... centrifuged for 20 minutes at 4°C and supernatants mixed 3:1 with 4x Laemmli sample buffer (Bio-rad 1610747). Samples were heated at 95°C for 5 minutes ...
-
bioRxiv - Cancer Biology 2022Quote: ... Proteins were eluted by heating the beads at 95°C for 5 min in Laemmli Sample Buffer (1610747, Bio-Rad) with 50 mM DTT followed by magnetic separation ...
-
bioRxiv - Neuroscience 2020Quote: ... 0.02% bromphenol blue) for 15min at 50°C and 5μg of protein were separated on a 4-20% SDS PAGE (Biorad, #4561096) and blotted onto nitrocellulose membranes by wet transfer ...
-
bioRxiv - Developmental Biology 2020Quote: ... boiled at 99 °C for 10 min and supernatants were loaded on 4–12% Criterion XT Bis–Tris precast gel (Biorad). The gel was fixed with 40% Methanol and 10% acetic acid and then stained for 1 hour using colloidal coomassie dye G-250 (Gel Code Blue Stain ...
-
bioRxiv - Microbiology 2020Quote: ... Real-time PCR was performed using SYBR Green (Applied Biosystem – 4309155) and primers listed in Table S1 at an annealing temperature of 60°C on a CFX96 thermal cycler (Biorad). Generated data were analysed using the CFX Manager Software (Biorad).
-
bioRxiv - Microbiology 2020Quote: ... it was activated in an oven at 120°C and imaged using a gel doc XR image system (Bio-Rad).
-
bioRxiv - Cancer Biology 2021Quote: ... centrifuged for 20 minutes at 13,000 rpm at 4°C and the protein concentration in the supernatant was measured with an DC protein assay (BioRad). Samples were separated by SDS-PAGE ...
-
bioRxiv - Neuroscience 2022Quote: ... heated to 95°C for 5 min before being separated by SDS-PAGE with Criterion Precast Gels (4 –15% Tris-HCl; BioRad) and transferred onto Immun-Blot PVDF 0.2 µm (BioRad ...
-
bioRxiv - Cancer Biology 2022Quote: ... Lysates were then denatured in 2X Laemmli at 95°C for 5 minutes and run in Mini-PROTEAN Precast Gels (BioRad) and transferred onto membranes using Trans-Blot Turbo ...
-
bioRxiv - Biochemistry 2020Quote: ... The samples were heated at 95°C for 5 min and separated on a 12% Bis-Tris SDS-PAGE gel (Biorad).
-
bioRxiv - Molecular Biology 2020Quote: ... was used at a dilution of 1:10000 for overnight at 4°C and probed for protein using ECL chemiluminescence kit (BioRad). HPLC purified protein was taken as control ...
-
bioRxiv - Biochemistry 2020Quote: ... The lysates were cleared for 10 min at 21,000 × g at 4°C and Bio-Rad protein assay reagent (Bio-Rad) was used to determine the protein concentrations of lysates ...
-
bioRxiv - Microbiology 2020Quote: ... The samples were heated at 90°C for 10 minutes and loaded onto a 4-20% precast polyacrylamide gel (BioRad). The gel was stained with SimplyBlue SafeStain (Invitrogen ...
-
bioRxiv - Biophysics 2021Quote: ... Purified TREK-2 was then mixed with GUVs to a final concentration of ∼1 - 5 µg/ml and incubated overnight at 4 °C with 0.5mg/ml Bio-Beads (Bio-Rad) prior to use.
-
bioRxiv - Microbiology 2021Quote: ... for 60 min at 37°C followed by purification on a Micro-Bio Spin P-6 Gel Column (Bio-Rad). 1 pmol of 5’-end-radiolabeled primer was used for each extension reaction ...
-
bioRxiv - Cell Biology 2020Quote: ... The embryos were mounted on a 2 % agarose pad and heat-shocked at 30°C for 1h (Thermocycler Bio-Rad). After 2h recovery at 20°C ...
-
bioRxiv - Cell Biology 2021Quote: Purified substrates and enzymes were centrifuged (16,000 g, 5 min, 4°C) before protein concentration was determined by Bradford assay (Bio-Rad) according to the manufacturer’s instructions ...
-
bioRxiv - Cancer Biology 2021Quote: ... Lysates were denatured by boiling in 1x Laemmli buffer at 95°C for 5 minutes and loaded on a 4–20% gradient gel (BioRad). PVDF membranes were used for proteins wet transfer (Bio-Rad) ...
-
bioRxiv - Cell Biology 2020Quote: ... The lysate was cleared by centrifugation at 10,000xg for 10 minutes at 4°C and then boiled in 2x Laemmli Sample Buffer (Bio-Rad). After SDS-PAGE ...
-
bioRxiv - Developmental Biology 2021Quote: ... was boiled at 95⁰C for 5 minutes prior to electrophoresis on a 4-20% gradient SDS-PAGE gel (BioRad). Membrane was blocked with 5% skim milk in TBST 1x on rocker for 1 hour ...
-
bioRxiv - Neuroscience 2021Quote: ... Samples (10 µg protein) were denatured at 95°C for 5 min in 4x Laemmli Sample Buffer (1610747, Bio-Rad) or Novex NuPAGE LDS Sample Buffer (NP0007 ...
-
bioRxiv - Developmental Biology 2021Quote: ... boiled at 99 °C for 10 min and supernatants were loaded on 4–12% Criterion XT Bis–Tris precast gel (Biorad). The gel was fixed with 40% methanol and 10% acetic acid and then stained for 1 hour using colloidal coomassie dye G-250 (Gel Code Blue Stain ...
-
bioRxiv - Cell Biology 2020Quote: ... Lysates were cleared for 10 min at 14000 rpm at 4°C and protein concentration of the supernatant was determined by using Protein Assay (BioRad). The co-immunoprecipitation was performed using GFP trap® beads (Chromotek ...
-
bioRxiv - Biochemistry 2021Quote: ... The reaction mixture was incubated for 30 minutes at 30°C and stopped by adding 12 μl of Laemmli sample buffer (Biorad). After HMT reactions ...