Labshake search
Citations for Biotek :
2251 - 2300 of 2988 citations for 2' 3' cGAMP STING based FRET Detection Kit 5 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Plant Biology 2024Quote: ... at least 30 minutes after measuring the difference in absorbance between 550 and 800 nm at RT using a using a plate reader PowerWave XS2 (BioTek). For each assay ...
-
bioRxiv - Immunology 2024Quote: ... samples were qualitatively assessed using the Take3 plate on the Cytation 1 cell imaging multi-mode reader with Gen5 software (BioTek). Samples which met established quality guidelines set by the sequencing facility were sent to University of Texas Genomic Sequencing and Analysis Facility for TagSeq library prep and sequencing on NovaSeq with single end ...
-
bioRxiv - Microbiology 2024Quote: ... The plate was sealed with a gas permeable seal (Azenta Life Sciences 4ti-0516/96*) and incubated at 37°C and 237 cpm for indicated times in a Synergy H1 plate reader (Agilent BioTek). OD600nm was measured every 10 min ...
-
bioRxiv - Immunology 2024Quote: ... Reaction was stopped using 0.5 M/1N sulfuric acid and absorbance measured at 450 nm with subtracting reference at 620 nm using ELISA plate reader (Epoc, BioTek). For K18-hACE2 mice challenged with D614G for unspecific binding ...
-
bioRxiv - Systems Biology 2023Quote: ... The 96-well plate was incubated at 37°C with shaking at 567 rpm in a microplate reader (Epoch2, BioTek). Cell growth was monitored at an optical density of 600 nm (OD600) ...
-
bioRxiv - Cell Biology 2023Quote: ... 100 μL of ROS-GloTM detection solution was added to each well and incubated for 20 minutes at room temperature before measuring luminescence signal with a Synergy H1 plate reader (BioTek).
-
bioRxiv - Evolutionary Biology 2023Quote: ... Dissolved dye is then transferred to a fresh 96-well plate and absorbance is quantified with a Synergy H2 microplate spectrophotometer (Biotek) at 550 nm ...
-
bioRxiv - Pathology 2023Quote: ... The assay was performed at 37°C in 96-well format and the fluorescence recorded using Synergy H1 plate reader (BioTek). Mir05 buffer with 1 mM malate ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... RNA concentrations were determined at 260nm using a Take3 microvolume plate on a Synergy H1m microplate reader (Biotek, Winooski, Vermont). RNA samples (1 μg ...
-
bioRxiv - Immunology 2022Quote: ... Reactions were quenched by addition of 1 N HCl and absorbance at 450 nm were analyzed using a plate reader (BioTek). ELISAs with gp120s and anti-idiotype monoclonal antibodies were performed as above except these proteins were immobilized directly onto high-binding 96-well assay plates (Costar ...
-
bioRxiv - Microbiology 2023Quote: ... Fluorescence of the Amcyan and Turborfp proteins produced by the spot colonies from each well was measured using the Synergy H1 plate reader (BioTek). We used the constitutive fluorescence of Amcyan to normalize TurboRFP production by reporter expression ...
-
bioRxiv - Developmental Biology 2023Quote: Kidney cortex-isolated protein lysates were serial diluted and run-in triplicate on a 96-well plate reader at 590nm wavelength (Synergy HT, BioTek). A standard curve of bovine serum albumin (BSA ...
-
bioRxiv - Microbiology 2023Quote: ... 20 µl of each reaction were transferred into the wells of a black 96-well plate containing 180 µl ABT buffer and fluorescence values were determined using SynergyTM Mx microplate reader (BioTek) at 366 nm excitation and 445 nm emission wavelengths ...
-
bioRxiv - Cancer Biology 2023Quote: The absorbance at 340 nm was measured every 10 or 12 seconds for 15 min by a Synergy HTX plate reader (BioTek). An NADH standard curve was used to determine the reaction rate ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... were determined under burst and steady-state conditions using ceftazidime (Δξ = −9,000 M−1 cm−1) at 260 nm by measuring the initial enzymatic reaction rate in a Epoch plate-reader (Biotek). Burst phase rates were determined at 4°C and steady-state parameters were determined at 25°C ...
-
bioRxiv - Cancer Biology 2023Quote: ... Colonies were solubilized in 10% acetic acid to quantify clonogenic capacity and read for absorbance at 590nm in a plate reader (BioTek).
-
bioRxiv - Molecular Biology 2023Quote: ... The culture was grown at 37 °C with continuous shaking and OD600 was measured for 16 h in Synergy Neo2 plate reader (BioTek). All readings were blank corrected ...
-
bioRxiv - Microbiology 2023Quote: ... Growth was monitored by measuring the OD at 600 nm every 20 min in a Synergy H1 plate reader (Biotek) with continuous double-orbital shaking (237 cpm ...
-
bioRxiv - Microbiology 2023Quote: ... emission = 420 nm) was recorded for 60 min (reading was performed every minute) using a Synergy H1 plate reader (Biotek). On the fourteenth minute ...
-
bioRxiv - Microbiology 2023Quote: ... The microtiter plates were incubated at 37°C and OD600 was measured every 10 minutes using Synergy H1 Hybrid Reader (BioTek) or Hidex Sense (Hidex Oy) ...
-
bioRxiv - Microbiology 2023Quote: ... The plate was incubated at 37 °C with continuous double orbital shaking for 16 hours in a Synergy Neo (Biotek) plate reader ...
-
bioRxiv - Molecular Biology 2023Quote: ... The Broccoli aptamer-BI fluorescence was measured upon 470 nm excitation and 510 nm emission in Synergy H1 plate reader (Biotek) for 2 to 8h at 37°C ...
-
bioRxiv - Microbiology 2023Quote: ... The microtiter plates were incubated at 37°C and OD600 was measured every 10 minutes using Synergy H1 Hybrid Reader (BioTek) or Hidex Sense (Hidex Oy) ...
-
bioRxiv - Microbiology 2023Quote: ... bacterial cultures were incubated 24 h at 37°C in a plate reader (Synergy HTX Multi-Mode Reader; BioTek Instruments). During incubation ...
-
bioRxiv - Systems Biology 2023Quote: ... 50 µL of samples were aliquoted in black 96-well (or alternatively 384-well) plates and measured with a Xenius spectrophotometer (or alternatively Synergy H1M microplate reader - BioTek) with an excitation wavelength of 280 nm and an emission wavelength of 360 nm.
-
bioRxiv - Biochemistry 2022Quote: ... Cultures were grown at 37° C with shaking and OD600 was monitored for each strain using a plate reader (BioTek). At least three biological replicates were conducted and plotted using Prism (GraphPad).
-
bioRxiv - Bioengineering 2022Quote: ... 24-well or 96-well plates with phenol-red free medium to be imaged by Cytation 7 cell imager (BioTek), at different time points during transfection ...
-
bioRxiv - Immunology 2023Quote: ... The plates were washed three times with 300 μL per well of PBST (PBS 1X, pH 7.4, 0.05% Tween-20) using a plate washer (BioTek 405 TS). 200 μL of blocking buffer (PBST wash buffer ...
-
bioRxiv - Genetics 2023Quote: ... containing 40µg/ml of RNAse A and spectrophotometric quantification was done using a multimode plate reader Synergy H1 (Biotek®). DNAs were normalized at 60ng/µl for subsequent processing.
-
bioRxiv - Biophysics 2023Quote: ... 20 µl of detection reagent was added and after another incubation step of 10 min the luminescence was measured using a micro plate reader (SynergyT MH1, BioTek). BSA was used as a negative control and measurements were performed in triplicates.
-
bioRxiv - Cell Biology 2023Quote: ... 50 µL of 1 mL neat culture media was assayed and absorbance values were collected at 450 nm on a Synergy HT plate reader (BioTek).
-
bioRxiv - Microbiology 2023Quote: ... The reading process for multiple plates is automated using a BioStack™ 4 microplate stacker (BioTek Instruments, Inc., Winooski, VT), which cycles the experimental 96-well microplates and removes the lids at the specified interval as to not interfere with spectrophotometric values ...
-
bioRxiv - Cell Biology 2023Quote: ... Fluorescence of each sample was read at an excitation of 570 nm and emission of 600 nm using Synergy H1 Plate reader (Biotek). The absorbance readings for each cell number (DMSO and adovasterib ...
-
bioRxiv - Biochemistry 2022Quote: ... Fluorescence was measured at regular intervals at 37 °C with excitation 485nm and emission 530nm using a Synergy H1 plate reader (BioTek). Initial rates were normalized to no inhibitor control to calculate percent activity and IC50 values were obtained using [inhibitor] vs ...
-
bioRxiv - Cancer Biology 2023Quote: ... The absorbance at 570nm and at 650nm for background was measured with the PowerWave340 plate reader (Biotek, Winooski, VT, USA). Assays were repeated to a total of five times for NCI-H295R cells and to a total of three times for MUC-1 and TVBF-7 cells ...
-
bioRxiv - Plant Biology 2023Quote: ... Absorbance measurements at 649 nm (A649) and 665 nm (A665) were recorded in each well using a plate reader (Biotek Synergy H1 ...
-
bioRxiv - Physiology 2023Quote: ... fluorescence with an excitation’s wavelength of 485 ± 20 nm and an emission’s wavelength of 530±20 nm is detected in a multimode plate reader (Synergy H1, Biotek AG).
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Total RNA quality and concentration for each extract were determined using absorbance measures at 260 and 280 nm with the spectrometer Epoch plate reader (Take3, Biotek) and analysed with the Gen5 software ...
-
bioRxiv - Synthetic Biology 2023Quote: ... emission 600 nm) and optical density (OD) readings were taken using a BioTek Synergy H1m plate reader (BioTek, Winooski, VT) after 5 hours of incubation unless otherwise noted ...
-
Sphingosine induction of the Pseudomonas aeruginosa hemolytic phospholipase C/sphingomyelinase, PlcHbioRxiv - Microbiology 2023Quote: ... and fluorescence measures were done using either BioTek Synergy2 or BioTek H1 multimode plate readers and data acquired using Gen5 (BioTek). Data were exported to Microsoft Excel and all normalization and fold-change calculations were done in Excel ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were cultured shaking overnight at 37 °C and OD600 measured the following morning by plate reader (BioTek Synergy Neo2). Background was subtracted from each well and then each well was normalized to the OD600 of the well without drug to calculate relative growth ...
-
bioRxiv - Biochemistry 2023Quote: ... The plate was covered with a gas permeable moisture seal (4titude) and was transferred to a Synergy Neo2 or SH1M2FG plate reader (Biotek) preheated to 37 °C ...
-
bioRxiv - Biochemistry 2023Quote: ... was added to all wells and the cells incubated for a further 7 h before recording fluorescence.(47) Fluorescence was recorded using a FLx 800 plate reader (BioTek) with excitation wavelength 530–535 nm and emission wavelength at 590–610 nm and data were processed using Gen5 Reader Control 2.0 Software (BioTek) ...
-
bioRxiv - Biochemistry 2023Quote: ... Steady-state depletion of NADH was assessed by measuring the absorbance at 340 nm in a Synergy Neo2 Multi-Mode Plate Reader (Biotek).
-
bioRxiv - Microbiology 2023Quote: ... The plate was incubated at 37°C with continuous double orbital shaking for 16 hours in a Synergy Neo (Biotek) plate reader ...
-
bioRxiv - Microbiology 2023Quote: ... Plates were grown at 37°C with shaking for 18 hours and OD600 was monitored (BioTek Synergy H1, BioTek Eon). Each experiment was performed with biological triplicate or higher as indicated ...
-
bioRxiv - Microbiology 2023Quote: ... Plates were grown at 37°C with shaking for 18 hours and OD600 was monitored (BioTek Synergy H1, BioTek Eon). Each experiment was performed with biological triplicate or higher as indicated ...
-
bioRxiv - Microbiology 2023Quote: ... MIC values were determined at 18 hours post-inoculation by reading optical density at 600 nm (OD600) on a Synergy Neo2 Multi-Mode Plate Reader (Agilent BioTek), and inhibition of growth defined as OD600<0.5 above background ...
-
bioRxiv - Molecular Biology 2024Quote: ... was subsequently added to the cell lysates and the luciferase activity was measured using the Glomax 96 plate reader (BioTek), according to the manufacturer’s protocol.
-
bioRxiv - Neuroscience 2024Quote: ... ATP was quantified in replicates of 6 using the Synergy H4 Hybrid Multi-well Plate Reader (Biotek, Winooski, Vermont, USA). The luminescent assay parameters were ...