Labshake search
Citations for Sutter Instruments :
151 - 200 of 217 citations for 5 tert Butyl 3 isocyanatoisoxazole since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2024Quote: ... Patch pipettes (3 MΩ resistance) were fabricated from 1.5-mm thick wall borosilicate glass capillaries using a P1000 puller (Sutter Instruments, Novato, CA). Whole cell formation was monitored with an AxoPatch200B amplifier (Molecular Devices ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes (4-6 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) with a micropipette puller (P-87, Sutter Instruments Co.) and filled with a potassium gluconate-based intracellular solution containing (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... USA) was used to pull patch pipettes (3–6MΩ) on a horizontal Flaming/Brown micropipette puller (P-97, Sutter Instruments, Novato, CA, USA). PVN neurons were selected for whole-cell patch-clamp recordings using DIC videomicroscopy and epifluorescence (retrogradely-labeled neurons) ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes (4-8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) with a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a potassium gluconate-based intracellular solution containing either (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch pipettes (4–8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) using a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a KGlu based intra-pipette solution containing (in mM) ...
-
bioRxiv - Physiology 2021Quote: ... Borosilicate patch pipettes were pulled and polished to resistance of 3-6 MΩ for all experiments using a micropipette puller (model P-97, Sutter Instruments, Novato, CA). Freshly dissociated arterial myocytes were kept in ice-cold Mg2+-PSS before being recorded.
-
bioRxiv - Neuroscience 2020Quote: Patch pipettes were prepared from borosilicate glass capillaries (G150F-3; Warner Instruments, Hamden, CT) using a P-1000 micropipette puller (Sutter Instruments, Novato, CA) and subsequently fire polished ...
-
bioRxiv - Neuroscience 2021Quote: ... L2/3 responses were probed between 200-300 microns from the cortical surface using a micromanipulator (MP-285, Sutter Instrument Company, Novato, CA). Signals were acquired after passing through unity gain (1x ...
-
bioRxiv - Neuroscience 2023Quote: ... pulled to a fine tip (20 - 50 µm tip diameter, 3 - 4 mm tip length) using a pipette puller (P-97, Sutter Instrument, Novato, CA). Injection needles were left in place for 5- 10 min following injections to minimize diffusion ...
-
bioRxiv - Physiology 2023Quote: ... Borosilicate patch pipettes were pulled and polished to resistances of 3-6 MΩ using a micropipette puller (model P-97, Sutter Instruments, Novato, CA).
-
bioRxiv - Physiology 2024Quote: ... Borosilicate patch pipettes were pulled and polished to resistances of 3-6 MΩ for all experiments using a micropipette puller (model P-97, Sutter Instruments, Novato, CA).
-
bioRxiv - Neuroscience 2022Quote: Patch pipettes were prepared from borosilicate glass capillaries (G150F-3; Warner Instruments, Hamden, CT) using a P-1000 micropipette puller (Sutter Instruments, Novato, CA) and were subsequently fire-polished ...
-
bioRxiv - Neuroscience 2022Quote: ... Patch pipettes (4–8 MΩ) were pulled from thin wall borosilicate glass (G150TF-3, Warner Instruments) using a micropipette puller (P-87, Sutter Instruments, Novato, CA) and filled with a potassium gluconate (KGlu)-based intrapipette solution containing (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... Borosilicate glass pipettes with a tip resistance of 3–6 MΩ were prepared using a P-97 puller (Sutter Instruments, Novato, CA, USA) and filled with intracellular recording solution (ICS ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes with electrode resistance of 3-7 MΩ were made fresh with a Zeitz puller (Werner Zeitz, Martinsried, Germany) from borosilicate thick glass (GC150F, Sutter Instruments, Novato, CA). Intracellular patch-pipette solution was the same as previously described (Zurek et al. ...
-
bioRxiv - Neuroscience 2024Quote: ... Visually guided whole-cell recordings were obtained with patch pipettes of ∼3 MΩ resistance pulled from borosilicate capillary glass (BF150-86-10, Sutter Instrument, Novato, CA). Electrophysiology data was acquired using a Sutter dPatch amplifier (Sutter Instruments) ...
-
bioRxiv - Neuroscience 2021Quote: ... Borosilicate pipettes of 5 – 8 MOhm resistance were pulled with a Flaming / Brown micropipette puller P-1000 (Sutter instruments). All recordings were done in current clamp with an intracellular solution containing 130 mM K-gluconate ...
-
bioRxiv - Neuroscience 2020Quote: The STG was desheathed dorsally and neuron somata were impaled using glass microelectrodes (ID: 0.86 mm; OD: 1.5 mm; 5-20 MΩ; Sutter Instrument). Microelectrodes were backfilled with a solution containing 10 mM MgCl2 ...
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... Patch electrodes with resistances of 2-5 MΩ were pulled with a P-97 micropipette puller (Sutter Instruments, USA). The conventional whole-cell recordings were obtained by manual suction for hERG ...
-
bioRxiv - Neuroscience 2022Quote: ... Data were filtered at 5 kHz and sampled at 10 kHz and stored in a computer (Sutter Instrument Co.). The standard internal pipette solution for whole-cell voltage-clamp contained (in mM ...
-
bioRxiv - Neuroscience 2020Quote: ... product HS-532B) about 1 cm away from the ends of 3-barrel borosilicate glass capillary tubes (Sutter Instrument, product FG-G3BF100-75-10) and shrinking it with an infrared lamp ...
-
bioRxiv - Neuroscience 2021Quote: ... Whole-cell patch-clamp recordings were performed using glass pipette electrodes (resistance 3–7 MΩ) pulled from borosilicate capillaries (BF150-86-10, Sutter Instruments, Novato, CA, USA) using a P-97 pipette puller (Sutter Instruments) ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch electrodes with a resistance of 3-5MΩ were guided to neurons with an MPC-200-ROE controller and MP285 mechanical manipulator (Sutter Instruments, Novato, CA, USA). Patch-clamp recordings were collected through a UPC-10 USB dual digital amplifier and Patchmaster NEXT recording software (HEKA Elektronik GmbH ...
-
bioRxiv - Cell Biology 2023Quote: ... and emission light was separated using interference (530/50 nm, 590/20-nm) or longpass (650LP) filters (Semrock) mounted in a filter wheel (Sutter instruments Lambda 10-3). An electronic shutter was used to block light exposure between image captures ...
-
bioRxiv - Neuroscience 2024Quote: ... Glass micropipettes with a tip resistance of 3-6 MΩ were prepared using a micropipette puller model P-1000 (Sutter Instrument Co., California, USA) and were filled with an intracellular solution containing (in mM) ...
-
bioRxiv - Neuroscience 2020Quote: ... World Precision) to obtain pipette resistance ranging from 5 – 8 MΩ using next generation micropipette puller (P-1000, Sutter Instrument). External solution is consist of 140 mM NaCl ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes (resistance 5-10 MΩ, pulled using a P-87 Flaming/Brown micropipette puller, Sutter Instruments, Novato, CA, USA) were filled with low chloride internal solution containing (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes (5-10 MΩ were pulled from borosilicate glass (1.5 mm, outer diameter) on a Flaming/Brown micropipette puller (Sutter Instruments). The series resistance (<20 MΩ ...
-
bioRxiv - Cell Biology 2020Quote: ... Glass micropipettes of inner diameter of ~5 μm were fabricated by pulling borosilicate glass pipette (BF100-50-10; Sutter Instrument) using a micropipette puller (Sutter Instrument) ...
-
bioRxiv - Biophysics 2020Quote: ... The pipettes with bubble number (BN)49 3.5-5.0 were made from the Kimble Chase 2502 soda lime glass using a Sutter P-86 puller (Sutter Instruments).
-
bioRxiv - Neuroscience 2024Quote: ... Borosilicate glass micropipettes with a tip resistance of ∼4-5 MΩ were prepared using a P-1000 puller (Sutter Instruments) and then filled with an intracellular recording solution containing (in mM ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch pipettes (resistance 5-10 MΩ, pulled on a P-87 Flaming/Brown micropipette puller, Sutter Instruments, Novato, CA, USA) were filled with low chloride internal solution containing (in mM) ...
-
bioRxiv - Cancer Biology 2024Quote: ... Recording pipettes were generated from borosilicate glass (Flaming-Brown puller, Sutter Instruments, P-97, tip resistance of 5–10 MΩ) and were filled with pipette solution consisting of 120 mM potassium gluconate ...
-
bioRxiv - Neuroscience 2023Quote: Patch pipette of 5-8 MΩ tip resistance were fabricated from borosilicate glass by using a microelectrode puller (Sutter Instruments). The initial access resistance was 18.2±0.5 MΩ for current-clamp recordings (n=21 ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes (3-5 MΩ) were pulled from borosilicate glass micropipettes (2mm O.D., Warner Instruments) using a P-1000 horizontal puller (Sutter Instruments).
-
bioRxiv - Neuroscience 2024Quote: ... The excitation filters (340 ± 5 and 380 ± 7) were controlled by a Lambda 10-2 optical filter change (Sutter Instrument).
-
bioRxiv - Neuroscience 2024Quote: Whole-cell recordings were made using borosilicate pipettes (2-5 MΩ) pulled with a flaming/brown micropipette puller (Sutter Instruments) and filled with internal recording solution containing (in mM) ...
-
bioRxiv - Cell Biology 2024Quote: ... 1.5–3.5 MΩ after fire-polishing for cell-attach) were pulled with a P-97 Flaming-Brown puller (Sutter Instrument). For whole-cell patch clamp ...
-
bioRxiv - Neuroscience 2020Quote: ... was recorded via a heat-pulled borosilicate glass electrode containing an Ag/AgCl filament and filled with aCSF (electrode tip Ø, 2–3 μm; inner Ø, 0.86 mm; outer Ø, 1.5 mm; Sutter Instrument; resistance 1.5–2.0 MΩ). The electrode was inserted under the glass coverslip ∼50 μm into the cerebral cortex ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes were made from borosilicate glass with a Flaming-Brown puller (P-97, Sutter Instruments; tip resistance 5-10 MΩ). The pipette solution contained (in mM ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch-pipettes (5–13 MΩ) were made from borosilicate glass capillary with a Flaming-Brown puller (P-1000 or P-97; Sutter Instrument) and polished with a microforge ...
-
bioRxiv - Neuroscience 2020Quote: ... Only virus transduced mice identified by their fluorescence upon excitation with a 572 nm LED (Cairn Research) were recorded using patch pipettes of 5–10 MΩ (P-97 Flaming/Brown puller, Sutter Instruments) containing intracellular solution (in mM) ...
-
bioRxiv - Neuroscience 2021Quote: ... Up to ~1.2 μL of viral solution per brain hemisphere were injected at cortical depths of 400 – 500 μm with a glass micropipette (Blaubrand IntraMARK 5 μl) pulled to about 10 – 20 μm inner diameter at the tips using a horizontal puller (Sutter Instruments). Usually 2–3 sites per hemisphere in S1 cortex were injected to increase the transduced brain area ...
-
bioRxiv - Neuroscience 2023Quote: ... was connected to the ground/reference electrode and slowly implanted into motor cortex using stereotactic procedures at a rate ∼5-10 µm/s under remote micromanipulator control (QUAD, Sutter Instruments) and visualised through a microscope (GT Vision) ...
-
bioRxiv - Neuroscience 2022Quote: ... a custom-made 32-channel silicon probe was gradually inserted into vermis lobule 4/5 using a single-axis manipulator (SOLO, Sutter instrument). After confirming PC activities by complex spikes ...
-
bioRxiv - Neuroscience 2022Quote: ... 1.5 mm diameter borosilicate pipettes with tip resistances of 2-5 MΩ were pulled using a P-1000 micropipette puller (Sutter Instruments). Pipettes were filled intracellular solution containing (in mM ...
-
bioRxiv - Neuroscience 2023Quote: ... in the supra-pyramidal blade of the dentate gyrus was recorded with a borosilicate glass pipette taper-pulled to an impedance of 5-7 MOhm (Sutter Instruments) and filled with the ACSF solution ...
-
bioRxiv - Neuroscience 2024Quote: ... The excitation filters (340±5 nm and 380±7 nm) were controlled by a Lambda 10-2 optical filter change (Sutter Instruments). Fluorescence was recorded through a 505 nm dichroic mirror at 535±25 nm ...
-
bioRxiv - Neuroscience 2024Quote: ... 5-7 MΩ pipettes were pulled from thick-walled borosilicate glass capillaries on a P-1000 Flaming Micropipette Puller (Sutter Instrument). The pipettes were filled with internal solution of the following composition ...
-
bioRxiv - Physiology 2021Quote: ... Low resistance electrodes (5-10 megaohms) were fashioned from cleaned capillaries using the P-87 Faming/Brown micropipette puller (Sutter Instrument Co.). The electrodes were silanized with dichlorodimethylsilane (440272-100ml ...