Labshake search
Citations for Sutter Instruments :
951 - 1000 of 1141 citations for p 2 Cyclopropyl 4 4 fluorophenyl 3 quinolinyl methyl phosphonic acid diethyl ester since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2022Quote: ... without inner filament) were designed using a custom-made program in a horizontal filament puller (P-97 Micropipette Puller, Sutter Instrument). Reduced cone angle and slender taper can be achieved using a 2-loop puller program.
-
bioRxiv - Neuroscience 2022Quote: Borosilicate glass pipettes (with a tip diameter of 5 μm and resistance of 1 MΩ when filled with ACSF) were fabricated on a micropipette puller (P-97 Flaming/Brown, Sutter Instruments), backfilled with 100-250 mM CaCl2 and placed into a pipette holder mounted on a motorized micromanipulator with a closed pressure system connected to a 1 mL syringe ...
-
bioRxiv - Microbiology 2022Quote: ... Glass needles were made by pulling a capillary (GB100TF-10, 0.78 × 1.00 × 100 mm; Science Products, Hofheim, Germany) on a P-97 micropipette puller (Sutter Instrument, Novato, California). Tips of the needles were cut with a razor blade ...
-
bioRxiv - Neuroscience 2022Quote: ... Borosilicate glass patch pipettes (3.5−4.5 MΩ) were pulled using a P-2000 laser-based micropipette puller (Sutter Instruments, CA, U.S.A.). Current clamp recordings were conducted using a potassium gluconate based internal solution (in mM) ...
-
bioRxiv - Neuroscience 2022Quote: Whole-cell voltage-clamp recordings were made from dissociated DRG neurons using patch pipettes pulled from Model P-1000 (Sutter Instruments). Patch pipettes had a resistance of 3-5MΩ when filled with an internal solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch electrodes were fabricated from borosilicate glass capillaries with a Brown-Flamming model P-80 micropipette puller (Sutter Instruments, Novato, CA) with resistances of 4–10 MΩ when back-filled with an internal solution ...
-
bioRxiv - Neuroscience 2024Quote: ... Borosilicate glass pipettes (Hilgenberg) of 6 - 8 MOhm resistance were pulled with a Flaming / Brown micropipette puller P-1000 (Sutter Instruments). The intracellular solution contained 130 mM K-gluconate ...
-
bioRxiv - Bioengineering 2024Quote: ... micropipette electrodes were used for injection of KA or saline and were pulled using an electrode pipette puller (P-97 Flaming/Brown Micropipette Puller, Sutter Instrument) to a taper of 15-20 micrometer (μm ...
-
bioRxiv - Cancer Biology 2023Quote: ... The glass needles necessary for injections were made of borosilicate (GB100T-8P, Science Product) and prepared using a pipette puller (P-97, Sutter Instruments). The needles were connected to a Pneumatic Picopump (WPI) ...
-
bioRxiv - Neuroscience 2023Quote: ... A small hole was drilled in the exposed skull and a 10 µl Hamilton syringe connected to a borosilicate injection micropipette pulled using a P-2000 puller (Sutter Instrument) coupled with a Quintessential Stereotaxic Injector (Stoelting ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch electrodes with a 2–3 M tip resistance were fabricated using a three-stage custom program on a Flaming-Brown micropipette puller (P-97, Sutter Instruments) and filled with solution containing the following (in mM) ...
-
bioRxiv - Neuroscience 2023Quote: ... The patch pipettes were produced from borosilicate glass capillary tubes (Hilgenberg GmbH) by using a horizontal puller (P-97, Sutter instruments) and filled with an intracellular solution containing K-gluconate 130 mM ...
-
bioRxiv - Developmental Biology 2023Quote: ... The fine recording (borosilicate) electrodes with a resistance of 20-25 MΩ were pulled using a P-97 micropipette puller (Sutter Instruments) and back-filled with 3M KCl ...
-
bioRxiv - Biophysics 2023Quote: ... were fabricated from borosilicate glass with filament (GB150F-8P, Science Products GmbH) on a horizontal puller (Model P-1000, Sutter Instruments). Light was provided by a pE-800 system (CoolLED) ...
-
bioRxiv - Neuroscience 2024Quote: ... Sharp micropipettes from quartz glass capillaries with a filament (OD/ID: 1.2/0.6mm) were fabricated with a laser-based micropipette puller (Sutter Instrument #P-2000), backfilled with Calcium Green dextran [5% (v/v ...
-
bioRxiv - Neuroscience 2024Quote: Glass electrodes (8-12 MΩ) pulled from borosilicate glass using a P-97 Flaming/Brown micropipette puller (Sutter Instruments, Novato, USA) were filled with a standard internal solution and used for either whole-cell or loose-patch clamp recordings ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... Pipettes were pulled from borosilicate thin wall glass (Warner Instruments, USA) using a P-87 micropipette puller (Sutter Instruments, Novato, CA), after which the tips were fire-polished on a microforge to yield pipette resistances of 3-5 MΩ after filling with intracellular pipette solution ...
-
bioRxiv - Neuroscience 2024Quote: ... was loaded into a quartz micropipette (tip diameter approximately 20 µm, Science products; pulled with a P-2000 laser puller, Sutter Instruments) connected to a pressure microinjector (100-125 PSI ...
-
bioRxiv - Neuroscience 2024Quote: ... made from borosilicate glass (Science Products, #GB150F-8P) were pulled using a horizontal microelectrode puller (P-97 Flaming/Brown type micropipette puller, Sutter Instruments). The electrodes were filled with a K-gluconate-based solution (122 mM K-gluconate ...
-
bioRxiv - Neuroscience 2024Quote: ... made from borosilicate glass (Science Products, #GB150F-8P) were pulled with a horizontal microelectrode puller (P-97 Flaming/Brown type micropipette puller, Sutter Instruments), and filled with a K-gluconate-based solution (122 mM K-gluconate ...
-
bioRxiv - Molecular Biology 2024Quote: ... and a 30-50 cm-long analytical column with an integrated spray tip (6-8 μm-diameter opening, pulled on a P-2000 laser puller from Sutter Instruments) made with 75-μm-inner diameter fused silica and 1.9 μm-diameter Reprosil-Pur C-18-AQ beads (Dr ...
-
bioRxiv - Neuroscience 2024Quote: ... Injections were performed using glass needles made by pulling Wiretrol II capillaries on a needle puller (Sutter Instruments, Model P-97) and beveled with a microgrinder (Narishige) ...
-
bioRxiv - Neuroscience 2024Quote: ... was pulled to standardized dimensions using a customized program in the pipette puller (P-2000, Sutter Instrument, Novato, CA 94949, USA). The recording electrode was placed in the pulled pipette filled with 1M KCl.
-
bioRxiv - Neuroscience 2024Quote: ... 5-7 MΩ pipettes were pulled from thick-walled borosilicate glass capillaries on a P-1000 Flaming Micropipette Puller (Sutter Instrument). The pipettes were filled with internal solution of the following composition ...
-
bioRxiv - Neuroscience 2023Quote: ... and a 3 mm trough filament (Sutter Instruments, Item# FT330B). Patch pipettes contained (in mM):
-
bioRxiv - Neuroscience 2024Quote: ... and fire-polished borosilicate pipettes (Sutter Instruments, 3-6 MΩ). All voltage traces were sampled at 10 kHz ...
-
bioRxiv - Cancer Biology 2021Quote: ... Fine borosilicate glass tubes with filaments were pulled into injection capillaries by Flaming/Brown Micropipette Puller (Model P-97, Sutter Instruments Co.). Capillary diameter was adjusted to 20μm by cropping it with a tweezer ...
-
bioRxiv - Microbiology 2021Quote: ... Patch electrodes were pulled from filamented borosilicate glass (1.5 mm OD, 0.86mm ID) using a P-97 puller (Sutter Instruments, Novato, CA, USA) to resistances of 3-6 MΩ ...
-
bioRxiv - Microbiology 2021Quote: ... Patch electrodes were pulled from filamented borosilicate glass (1.5 mm OD, 0.86mm ID) using a P-97 puller (Sutter Instruments, Novato, CA, USA) to resistances of 3-6 MΩ ...
-
bioRxiv - Neuroscience 2020Quote: ... Cells were patched with BF150-75-10 glass pipettes (∼ 6 MΩ) pulled with a Flaming Brown Micropipette Puller (Model P-97, Sutter Instruments, US). Pipettes were mounted on a MP-225 micromanipulator and filled with an intracellular solution containing 120mM K-gluconate ...
-
bioRxiv - Microbiology 2020Quote: ... Patch electrodes were pulled from filamented borosilicate glass (1.5 mm OD, 0.86mm ID) using a P-97 puller (Sutter Instruments, Novato, CA, USA) to resistances of 2-5 MΩ ...
-
bioRxiv - Neuroscience 2022Quote: ... CSF was sampled from cisterna magna with a glass capillary (30-0067, Harvard Apparatus pulled by a Brown Micropipette puller, Model P-97, Sutter Instruments) placed at a 5° angle (7.5 mm distal to the occipital bone and 1.5 mm lateral to the muscle-midline) ...
-
bioRxiv - Neuroscience 2022Quote: ... CSF was sampled from cisterna magna at 5min intervals with a glass capillary (30-0067, Harvard Apparatus pulled by a Brown Micropipette puller, Model P-97, Sutter Instruments) placed at a 5° angle (7.5 mm distal to the occipital bone and 1.5 mm lateral to the muscle-midline) ...
-
bioRxiv - Cancer Biology 2021Quote: For injection of tumor cells, borosilicate glass capillaries (GB100T-8P, without filament, Science Products GmbH, Germany) pulled with a needle puller (P-97, Sutter Instruments, USA) were used ...
-
bioRxiv - Neuroscience 2021Quote: ... Patch electrodes were pulled from borosilicate glass capillaries (OD: 1.5 mm; Hilgenberg GmbH, Germany) using a micropipette puller (Model P-97, Sutter Instruments Co., CA) and had a resistance between 4 and 7 MΩ ...
-
bioRxiv - Neuroscience 2020Quote: ... Electrodes were fabricated from 1.7 mm capillary glass and fire-polished to a resistance of 0.9-1.3 MΩ using a Sutter P-97 puller (Sutter Instrument Company, Novato, CA). All voltage protocols were started 5 minutes after obtaining a gigaΩ seal and entering the whole-cell configuration ...
-
bioRxiv - Neuroscience 2021Quote: ... The resistance of patch pipettes (7–9 ΩM) were fabricated from borosilicate capillaries (OD: 1.5 mm; Sutter, USA) using a Micropipette Puller (Model P-97, Sutter Instrument Co., CA). Patch pipettes were filled with a solution containing (in mM ...
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes were pulled from borosilicate glass tubing (Outer diameter: 1.5 mm, Wall thickness: 0.225 mm) with a horizontal pipette puller (P-97, Sutter Instruments, Novato, CA, USA) and filled with the intracellular solution contained 130 mM K-gluconate ...
-
bioRxiv - Physiology 2021Quote: ... Low resistance electrodes (5-10 megaohms) were fashioned from cleaned capillaries using the P-87 Faming/Brown micropipette puller (Sutter Instrument Co.). The electrodes were silanized with dichlorodimethylsilane (440272-100ml ...
-
bioRxiv - Cancer Biology 2021Quote: ... non-filamented borosilicate micropipettes were pulled to a resistance of 5-10 MΩ (P-97 micropipette puller, Sutter Instruments, Novato, CA, USA) and coated with a hydrophobic layer of N,N-dimethyltrimethylsilylamine (Sigma Aldrich ...
-
bioRxiv - Biophysics 2021Quote: ... Borosilicate glass pipettes with filaments (BF150-86-7.5) were pulled on a P-1000 Flaming/Brown Micropipette Puller (both from Sutter Instruments, California, USA) with an optimized protocol for obtaining 2-5 MΩ resistance ...
-
bioRxiv - Pharmacology and Toxicology 2021Quote: ... pulled from 1.5 mm borosilicate glass capillaries (Zeitz-Instruments GmbH, München, Germany) using micropipette puller P 97 (Sutter Instruments, Novato, CA, USA). The tips were polished to have a pipette resistance of 2–4 MΩ in the bath solution ...
-
bioRxiv - Cell Biology 2022Quote: ... was used and mRNAs were injected via glass capillaries (30-0020, Harvard Apparatus, pulled by a needle puller P-97, Sutter Instruments) while mounted on a microinjection system (PV820 ...
-
bioRxiv - Neuroscience 2023Quote: ... CSF was sampled from cisterna magna at 5⍰min intervals with a glass capillary (30–0067, Harvard Apparatus pulled by a Brown Micropipette puller, Model P-97, Sutter Instruments) placed at a 5° angle (7.5⍰mm distal to the occipital bone and 1.5⍰mm lateral to the muscle-midline) ...
-
bioRxiv - Neuroscience 2022Quote: ... Virus was injected using borosilicate glass capillaries (World Precision Instrument, Sarasota FL) made using the Sutter Micropipette Puller (Model P-2000, Sutter Instrument Company) and bevelled at a 45 degree angle ...
-
bioRxiv - Physiology 2022Quote: All recording micropipettes were pulled from 1.5 mm OD thick-walled borosilicate glass using a horizontal puller (P-87; Sutter Instruments, Novato, CA) and filled with 3 M potassium acetate ...
-
bioRxiv - Neuroscience 2022Quote: ... The fluorophore (10 μM in HEPES-buffered E3) was loaded into a glass pipette (tip diameter: ~5 μm; Model P-97 Flaming/Brown Micropipette Puller, Sutter Instrument Co.) aimed ~20 μm away at the cupula ...
-
bioRxiv - Biophysics 2023Quote: ... Micropipettes were made in house with borosilicate capillaries pulled into fine cones using a laser pipette puller (P-2000, Sutter Instrument Co.) and microforged at the desired inner diameter (3-4 µm) ...
-
bioRxiv - Neuroscience 2023Quote: ... CSF was sampled at 5 min intervals from cisterna magna with a glass capillary (30-0067, Harvard Apparatus pulled by a Brown Micropipette puller, Model P-97, Sutter Instruments) placed at a 5° angle (7.5 mm distal to the occipital bone and 1.5 mm lateral to the muscle-midline) ...
-
bioRxiv - Neuroscience 2023Quote: ... Thin walled borosilicate glass capillary tubing was shaped into microelectrodes for recording using a horizontal puller (P-97, Sutter Instruments, CA, USA) and had resistance values of 3-6 MΩ when filled with internal solution (composition in mM ...