Labshake search
Citations for Sutter Instruments :
901 - 950 of 1141 citations for p 2 Cyclopropyl 4 4 fluorophenyl 3 quinolinyl methyl phosphonic acid diethyl ester since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2020Quote: ... Patch pipettes (resistance 5-10 MΩ, pulled using a P-87 Flaming/Brown micropipette puller, Sutter Instruments, Novato, CA, USA) were filled with low chloride internal solution containing (in mM) ...
-
bioRxiv - Biochemistry 2021Quote: ... were produced from borosilicate glass capillaries (1.0 mm o.d., 0.68 mm inner diameter) using a P-1000 micropipette puller (Sutter Instruments, Novato, CA). To perform nanoESI ...
-
bioRxiv - Biophysics 2020Quote: ... The pipettes with bubble number (BN)49 3.5-5.0 were made from the Kimble Chase 2502 soda lime glass using a Sutter P-86 puller (Sutter Instruments).
-
bioRxiv - Neuroscience 2022Quote: ... Warner Instruments) and pulled to 1-1.5 μm tip diameter using a Flaming Brown P-97 pipette puller (Sutter Instruments), such that their resistance when backfilled with external solution was approximately 7-10 MΩ ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch pipettes (2-5MΩ) were fabricated by pulling borosilicate glass micropipettes (2mm o.d., Warner Instruments) via a P-1000 horizontal puller (Sutter Instruments). The internal pipette solution contained 130mM K methanesulfonate ...
-
bioRxiv - Neuroscience 2023Quote: Pipettes with resistance of 3.5-6 MΩ were fabricated from borosilicate filamented capillaries using the P-97 micropipette puller (Sutter Instrument). The pipettes were filled with an internal solution composed of 8mM NaCl ...
-
bioRxiv - Cell Biology 2023Quote: ... Injection pipettes consisted of borosilicate glass capillaries (1 mm in diameter) pulled with a needle puller (P-1000; Sutter Instruments) and ground with a 30° angle on a needle beveler (BV-10 ...
-
bioRxiv - Bioengineering 2023Quote: ... Injections were performed using Sutter quartz needles (1.0 mm external diameter 0.70mm internal diameter needles with filaments) drawn out on a Sutter P-2000 laser micropipette puller (Sutter Instrument) with the following program ...
-
bioRxiv - Neuroscience 2022Quote: ... Recording electrodes were prepared by pulling borosilicate capillary tubes with a P-97 Flaming/Brown micropipette puller (Sutter Instrument Co) to a tip resistance of 2-6 MΩ and were then back-filled with aCSF ...
-
bioRxiv - Neuroscience 2022Quote: The tapered glass fibers were obtained by the thermal drawing of a glass rod (1.5 mm in diameter) using a micropipette puller (P-1000, Sutter Instrument). To mimic the typical axon diameters (1–5 μm) ...
-
bioRxiv - Neuroscience 2024Quote: ... Intracellular solution (ICS) was used to fill borosilicate glass pipettes pulled with a horizontal puller (P-1000, Sutter Instrument Company), with a pipette resistance between 3-5 MΩ ...
-
bioRxiv - Genomics 2024Quote: ... Microinjection needles were pulled to have a final specification of ∼1.5-μm tip size and ∼7-mm taper length on a P-1000 needle puller (Sutter Instrument), using the following pulling parameters ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch pipettes (resistance 5-10 MΩ, pulled on a P-87 Flaming/Brown micropipette puller, Sutter Instruments, Novato, CA, USA) were filled with low chloride internal solution containing (in mM) ...
-
bioRxiv - Cancer Biology 2024Quote: ... Recording pipettes were generated from borosilicate glass (Flaming-Brown puller, Sutter Instruments, P-97, tip resistance of 5–10 MΩ) and were filled with pipette solution consisting of 120 mM potassium gluconate ...
-
bioRxiv - Neuroscience 2023Quote: For virus injections, borosilicate glass capillaries (cat. no. 1408472, Hilgenberg) were pulled on a P-97 micropipette puller (Sutter Instruments), broken to a tip diameter of Ø40–50 µm ...
-
bioRxiv - Neuroscience 2023Quote: ... Borosilicate glass recording electrodes were pulled with either a Narishige or Sutter P-97 Flaming/Brown electrode puller (Sutter Instruments) with a resistance of 2.5-4.0MΩ ...
-
bioRxiv - Neuroscience 2022Quote: ... Electrode pipette was fabricated from KG-33 borosilicate glass (King Precision Glass) using a Sutter P-2000 puller (Sutter Instruments). For current clamp recording ...
-
bioRxiv - Neuroscience 2022Quote: ... pulled from borosilicate glass (OD: 1.5 mm, ID: 0.86 mm; Sutter instrument; P-87 Flaming/Brown micropipette puller, Sutter Instruments), had resistances of 6–10 MΩ for GCs and PG cells recordings and of 3-5 MΩ and were filled with a cesium gluconate-based solution ...
-
bioRxiv - Biophysics 2022Quote: ... Single-larva micromanipulation experiments were conducted using TW-1200 borosilicate glass micropipettes pulled using a P-1000 Puller (Sutter Instruments). Pipettes were scored and broken off to give an OD of (100 ± 10 ...
-
bioRxiv - Neuroscience 2022Quote: ... Whole-cell patch clamp was performed using borosilicate capillaries pulled with a P-87 flaming-brown micropipette puller (Sutter Instruments). The pipettes had a resistance of 3-6 MΩ ...
-
bioRxiv - Neuroscience 2022Quote: ... Electrodes were made from glass capillaries (Science Products, GB100-10) with a horizontal puller (P-87, Sutter Instruments Co., USA) and were individually broken to fit to the size of each nerve ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch electrodes were fabricated on a horizontal Flaming and Brown micropipette puller (Model P-87, Sutter Instruments, Novato, CA, USA). Potassium methanesulfonate-based internal solution (mM ...
-
bioRxiv - Neuroscience 2023Quote: ... Borosilicate glass micropipettes (15-40 MΩ) were pulled on a horizontal pipette puller (Model P-1000, Sutter Instruments, Novato, CA). Pipettes were filled with an intracellular solution containing in mM ...
-
bioRxiv - Molecular Biology 2023Quote: Electrophysiological recordings were performed in the inside-out patch clamp configuration with patch pipettes (1–2 μm tip opening) pulled from 1.5 mm borosilicate glass capillaries (Zeitz-Instruments GmbH) using micropipette puller P 97 (Sutter Instruments). The tips were polished to have a pipette resistance of 2–4 MΩ in the bath solution ...
-
bioRxiv - Neuroscience 2024Quote: A Flaming/Brown Micropipette puller was used to form microinjection needles suitable for use in zebrafish (Sutter Instruments P-97). A ramp test was performed to determine the optimal heating temperature to prevent plastic deformation of the needle taper of 492 ...
-
bioRxiv - Neuroscience 2024Quote: ... Patch pipettes (3-5 MΩ) were pulled from borosilicate glass micropipettes (2mm O.D., Warner Instruments) using a P-1000 horizontal puller (Sutter Instruments).
-
bioRxiv - Cell Biology 2024Quote: ... 1.5–3.5 MΩ after fire-polishing for cell-attach) were pulled with a P-97 Flaming-Brown puller (Sutter Instrument). For whole-cell patch clamp ...
-
bioRxiv - Neuroscience 2022Quote: ... Recording electrodes (3-5 MΩ, Borosilicate Glass, Sutter Instrument) were prepared by a micropipette puller (Sutter Instrument ...
-
bioRxiv - Neuroscience 2024Quote: ... A motorized 3-axes translational stage (3DMS, Sutter Instruments) was used to obtain a mosaic of the entire brain slice ...
-
bioRxiv - Cell Biology 2024Quote: ... The motorized filter wheels (Lambda 10-3; Sutter Instrument), automated stage (H117EIX3 ...
-
bioRxiv - Cell Biology 2024Quote: ... an automated filter wheel (Sutter Instruments; Lambda 10–3), a charge-coupled device camera (Visitron Systems ...
-
bioRxiv - Cell Biology 2023Quote: ... The motorized filter wheels (Lambda 10-3; Sutter Instrument), automated stage (H117EIX3 ...
-
bioRxiv - Cell Biology 2024Quote: ... A motorized filter wheel (Lambda 10-3, Sutter Instruments) equipped with interference filters (Semrock ...
-
bioRxiv - Neuroscience 2024Quote: ... Recording electrodes (3–5 MΩ, Borosilicate Glass, Sutter Instrument) were prepared with a micropipette puller (Sutter Instrument ...
-
bioRxiv - Cell Biology 2024Quote: ... Filter exchange was achieved either by Ti2-E integrated filter turret or LB10-NEW filter wheel with LB10-3 LAMBDA 10-3 controller both from Sutter Instrument (Novato, USA). Hardware control for synchronized imaging was performed by PCIe-6323 card with a 6323 trigger breakout box both from National Instruments (Austin ...
-
bioRxiv - Neuroscience 2021Quote: ... Recording pipettes were made from borosilicate glass with a Flaming-Brown puller (P-97, Sutter Instruments; tip resistance 5-10 MΩ). The pipette solution contained (in mM ...
-
bioRxiv - Neuroscience 2020Quote: ... We used a 3-5 MΩ glass patch pipettes (capillary tubing with 1.5/0.75 mm OD/ID) that were pulled on a P-97 Flaming/Brown type micropipette puller (Sutter Instrument Company, USA). The pipette solution contained 120mM K-aspartate ...
-
bioRxiv - Neuroscience 2020Quote: ... pulled from borosilicate glass tubes with 2.0 mm outer diameter and 0.5 mm wall thickness (Hilgenberg, Malsfeld, Germany; Flaming-Brown P-97 puller, Sutter Instruments, Novato, USA). Current-clamp recordings of newborn granule cells were conducted using glass with 0.7 mm wall thickness with higher pipette resistances (6-12MΩ ...
-
Pax6 loss alters the morphological and electrophysiological development of mouse prethalamic neuronsbioRxiv - Developmental Biology 2021Quote: ... Recording pipettes were pulled from borosilicate glass capillaries (Havard Apparatus, 30-0060) on a horizontal electrode puller (P-97, Sutter Instruments) to a tip resistance of 4-6 MΩ ...
-
bioRxiv - Cell Biology 2021Quote: ... the fused silica capillary had been equipped with a laser pulled electrospray tip using a P-2000 Laser Based Micropipette Peller (Sutter Instruments). Alternatively ...
-
bioRxiv - Neuroscience 2022Quote: ... all electrodes used in any experiment in this study were made at the same time using a p-97 micropipette puller (Sutter Instruments) before data collection ...
-
bioRxiv - Neuroscience 2020Quote: Recordings of extracellular field potentials in the pyramidal layer of CA3a region of hippocampus were obtained using glass micropipettes (15 MΩ pulled on a P-97, Sutter instruments) field with ACSF ...
-
bioRxiv - Neuroscience 2022Quote: ... Recording pipettes were pulled from borosilicate capillary glass (Havard Apparatus, 30-0060) on a horizontal electrode puller (P-97, Sutter Instruments) to a tip resistance of 4-6 MΩ and filled with K-gluconate-based internal solution (in mM ...
-
bioRxiv - Microbiology 2022Quote: ... 40 cm long fused silica analytical column with an integrated spray tip (6 – 8 μm-diameter opening, pulled on a P-2000 laser puller from Sutter Instruments). The analytical column was packed with 1.9 μm-diameter Reprosil-Pur C-18-AQ beads (Dr ...
-
bioRxiv - Neuroscience 2020Quote: ... Only virus transduced mice identified by their fluorescence upon excitation with a 572 nm LED (Cairn Research) were recorded using patch pipettes of 5–10 MΩ (P-97 Flaming/Brown puller, Sutter Instruments) containing intracellular solution (in mM) ...
-
bioRxiv - Developmental Biology 2021Quote: Micropipettes for DNA injection were generated using a micropipette puller (model P-87 Flaming/Brown, Sutter Instrument Co., Novato, CA, USA). Borosilicate capillary glass without a filament and with an outside diameter of 1 mm and an inner diameter of 0.75 mm (B100 – 75 – 10 ...
-
Multi cell line analysis of lysosomal proteomes reveals unique features and novel lysosomal proteinsbioRxiv - Molecular Biology 2020Quote: ... 50 cm spray tips were generated from 360 μm outer diameter/ 100 μm inner diameter fused silica capillaries using a P-2000 laser puller (Sutter Instruments) and packed with 1.9 μm Reprosil AQ C18 particles (Dr ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... 75-μm-inner diameter fused silica analytical column with an integrated spray tip (6-8-μm-diameter opening, pulled on a P-2000 laser puller, Sutter Instruments). The trap column is packed with 5 μm Aqua C18 beads (Phenomenex ...
-
bioRxiv - Molecular Biology 2020Quote: ... was used together with a fused silica spraying capillary pulled to a tip diameter of 8-10 um using a P-2000 capillary puller (Sutter Instruments). The capillary tubing (75 µm I.D. ...
-
bioRxiv - Neuroscience 2023Quote: ... Patch electrodes with a 2–3 M tip resistance were fabricated using a three-stage custom program on a Flaming-Brown micropipette puller (P-97, Sutter Instruments) and filled with solution containing the following (in mM) ...