Labshake search
Citations for A-M Systems :
301 - 350 of 724 citations for Oleoyl Gly Lys m PEG11 amine since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2020Quote: ... and filtered (0.3-10kHz; A-M Systems model 1800 and Krohn-Hite model 3382) before being sent to an A/D converter (Power 1401 ...
-
bioRxiv - Neuroscience 2023Quote: ... Carbon fibers were enclosed in pulled-glass capillaries (8250, A-M Systems, Sequim, WA) with back-filled epoxy (Epo-Tek 301 ...
-
bioRxiv - Neuroscience 2023Quote: ... Connectors were referenced and grounded via silver wires (127 μm diameter, A-M Systems) placed above the cerebellum ...
-
bioRxiv - Neuroscience 2023Quote: ... with each channel soldered to a bare silver wire (A-M Systems, 381 µm). Monopolar electrodes (teflon-coated tungsten ...
-
bioRxiv - Neuroscience 2023Quote: Electrical stimulation was generated by an isolated pulse stimulation (Modell 2100, A-M Systems) and administered to the left forepaw via micro vascular clips (Roboz Surgical Instrument Co.) ...
-
bioRxiv - Neuroscience 2022Quote: ... a 1-s footshock (0.9 mA; Model 2100 Isolated Pulse Stimulator, A-M System) immediately followed the last white noise burst ...
-
bioRxiv - Neuroscience 2022Quote: The ES was generated by an isolated pulse stimulator (A-M Systems, model 2100) and applied for 120 seconds in the pretectal nLM ...
-
bioRxiv - Neuroscience 2024Quote: ... Responses were digitized at 20kHz using an AC amplifier (A-M Systems, Model 1700) and recorded using NAC2.0 Neurodata Acquisition System (Theta Burst Corporation) ...
-
bioRxiv - Neuroscience 2023Quote: ... LFP signals were acquired by a two-channel amplifier (A-M Systems, Model 1800) at a gain of 100 and filter settings of between 0.1 Hz and 2 kHz ...
-
bioRxiv - Neuroscience 2023Quote: ... Glass micropipettes (Garner KG-33, OD 1.5 mm, ID 1.12 mm; A-M Systems) were pulled on a vertical puller (PC-10 ...
-
bioRxiv - Neuroscience 2023Quote: ... recordings were digitized at 20kHz using an AC amplifier (A-M Systems, Model 1700) and collected using NacGather 2.0 (Theta burst Corp.).
-
bioRxiv - Bioengineering 2022Quote: ... Stimulation was performed using a model 2100 isolated pulse stimulator (A-M Systems, USA) at 2 Hz ...
-
bioRxiv - Neuroscience 2022Quote: ... The electrodes were connected to a differential AC amplifier (A-M systems model 1700). The output signal from the AC amplifier over the frequency range between 1.0Hz and 500Hz was recorded using a digital data acquisition system (Axons Instruments ...
-
bioRxiv - Neuroscience 2023Quote: ... Multiple bipolar EMGs using 0.002” and 0.003” coated stainless steel wires (A-M Systems, Sequim ...
-
bioRxiv - Neuroscience 2023Quote: ... and amplified (100–5000×) using a 16-channel amplifier (model 3500; A-M Systems). As we implanted more than 16 muscles per cat ...
-
bioRxiv - Neuroscience 2024Quote: Electrodes were constructed from 25µm formvar-insulated NiChrome wires (A-M Systems Carlsborg, WA) as previously described (Takahashi ...
-
bioRxiv - Neuroscience 2024Quote: ... and filtered (0.3-10kHz; A-M Systems model 1800 and Krohn-Hite model 3382) then sampled at 50 kHz by an A/D converter (Power 1401 ...
-
bioRxiv - Neuroscience 2024Quote: ... and monitored on an oscilloscope (Tektronix) and through an audio monitor (A-M Systems). Characteristic LFP responses to ∼1 Hz manual jaw movement were typically found ∼-2.5–4 mm below the surface of the brain.
-
bioRxiv - Neuroscience 2024Quote: ... Reference and ground electrodes (Teflon-coated silver wires, A-M Systems; 125 μm diameter) were implanted above the cerebellum ...
-
bioRxiv - Neuroscience 2024Quote: ... TC fibers were electrically stimulated with a stimulator generator (model 2100, A-M systems) whose positive electrode was placed in the recording chamber and the negative one was inserted in a 1-2 MΩ borosilicate glass pipette filled with an HEPES-based aCSF containing (in mM) ...
-
bioRxiv - Neuroscience 2024Quote: ... We inserted pairs of insulated stainless steel fine wires (A-M Systems, WA, USA) in the belly of each muscle with 2 mm exposed wire at the tip ...
-
bioRxiv - Bioengineering 2024Quote: ... then connected to the stimulator device (Model 4100, A-M Systems Inc, Carlsborg, WA). The stimulation monitoring channel was connected to an analog input on the EMG system for synchronization ...
-
bioRxiv - Neuroscience 2024Quote: ... The cortical EEG and EMG signals are amplified (A-M System 3500, United States) and digitalized with a resolution of 256 Hz using Vital Recorder (Kissei ...
-
bioRxiv - Neuroscience 2024Quote: ... A ground screw coupled with a 0.005” stainless steel wire (A-M Systems, #792800) was implanted in the skull above the cerebellum ...
-
bioRxiv - Neuroscience 2024Quote: ... and amplified (100–5000×) using a 16- channel amplifier (model 3500; A-M Systems). As we implanted more than 16 muscles per cat ...
-
bioRxiv - Neuroscience 2024Quote: ... the gold wires were wrapped around a thicker silver wire (0.003”, A-M Systems) first before a thin coat of solder was applied quickly to make the connection ...
-
bioRxiv - Neuroscience 2024Quote: ... The micropipette tips were then attached to bipolar suction electrodes (A-M Systems; 573040) and filled to the electrode tip with aCSF before suctioning the roots ...
-
bioRxiv - Neuroscience 2024Quote: ... were amplified using a differential amplifier (Model 1700, A-M Systems, Sequim, United States) with a high pass filter at 300 Hz ...
-
bioRxiv - Neuroscience 2024Quote: The cooling device is consisted of a 250µm diameter silver wire (A-M systems, #781000 ...
-
bioRxiv - Neuroscience 2021Quote: ... The cannula was fixed in place with dental cement (A-M Systems, #525000 and #52600) before releasing from the stereotaxic arm ...
-
bioRxiv - Neuroscience 2021Quote: ... Monopolar electric currents were generated by an analog stimulus isolator (Model 2200, A-M Systems).
-
bioRxiv - Neuroscience 2021Quote: ... were routed into a 1-mm diameter polyethylene tube (A-M Systems, Inc., Sequim, WA) to protect the wires from damage during implantation ...
-
bioRxiv - Neuroscience 2021Quote: Evoked synaptic currents were elicited with a bipolar stimulating electrode (A-M Systems, Carlsborg, WA), controlled by a Model 2100 Isolated Pulse Stimulator (A-M Systems ...
-
bioRxiv - Neuroscience 2021Quote: ... The recordings were fed to a 16-channel digital amplifier (A-M Systems, Carlsborg, WA) through preamplifiers ...
-
bioRxiv - Neuroscience 2021Quote: ... EEG (stainless steel wire [203.2 μm coated diameter] with Teflon insulation, A-M Systems Inc.) and EMG (stainless steel wire [140 μm coated diameter] with PFA insulation ...
-
bioRxiv - Neuroscience 2020Quote: ... Signals were accessed with an AC amplifier (Microelectrode AC Amplifier, Model 1800, A-M Systems, Inc. ...
-
bioRxiv - Neuroscience 2021Quote: ... Tetrodes were made from 18 micron Nichrome Formvar insulated wire (A-M Systems, Inc., USA). Tetrodes were gold plated over three to five days using a nanoZ (White Matter LLC ...
-
bioRxiv - Neuroscience 2020Quote: ... Current clamp recording was conducted using the AM2400 amplifier (A-M Systems, Sequim, WA, USA) driven by the WinWCP program provided by John Dempster (University of Strathclyde ...
-
bioRxiv - Neuroscience 2020Quote: ... Two Teflon coated stainless steel wires (0.005 inch bare, A-M Systems, Sequim, WA, USA) from the electrode interface board of the flexDrive were connected to the screws for grounding ...
-
bioRxiv - Neuroscience 2021Quote: ... For this we placed a tungston microelectrode (12 MΩ, #575400, A-M Systems, Sequim, USA) in the ventral horn near the axons terminals on motoneurons ...
-
bioRxiv - Neuroscience 2021Quote: ... Voltage was acquired in current-clamp mode using a Model 2400 amplifier (A-M Systems) at 10 kHz ...
-
bioRxiv - Neuroscience 2023Quote: ... We provided the stimulation using AM stimulators Model 2100 (A-M Systems, Sequim, WA, USA). Electromyographic and neural signals were acquired using the LTR-EU-16 recording system with LTR11 ADC (L-Card ...
-
bioRxiv - Neuroscience 2023Quote: ... The extracellular electrodes were connected to a differential AC amplifier (Model 1700, A-M Systems). To reach a steady state in each neuromodulatory condition ...
-
bioRxiv - Neuroscience 2022Quote: ... Connectors were referenced and grounded via 4 silver wires (127 μm diameter, A-M Systems) placed above the cerebellum ...
-
bioRxiv - Neuroscience 2022Quote: ... Surface cortical signals were amplified using a differential AC amplifier (Model 1700; A-M Systems), filtered at 1 Hz– 1 kHz ...
-
bioRxiv - Neuroscience 2024Quote: ... We used tetrodes as the driving electrodes and tungsten wires (715000, A-M Systems, U.S.A.) as the fixed electrodes.
-
bioRxiv - Neuroscience 2024Quote: ... connected in turn to an analog stimulus isolator (model 2200, A-M Systems, Sequim, WA), or using a PC running an Arduino script connected to a StimJim dual-channel electrical stimulator ((82) ...
-
bioRxiv - Neuroscience 2023Quote: ... The single electrodes were assembled with Teflon-coated stainless-steel wires (A-M Systems, 790600) and silicon cannulas ...
-
bioRxiv - Physiology 2024Quote: ... and connected to a 16-channel preamplifier (Model 3600, A-M systems, Sequim, WA, USA) with a head-stage pre-amplifier ...
-
bioRxiv - Neuroscience 2023Quote: ... and three tungsten wires protruding approximately 0.5 mm beyond the lens surface (A-M systems) were attached to the lens to reduce motion artifacts during imaging ...