Labshake search
Citations for Polysciences :
601 - 650 of 688 citations for Triclosan 13C12 99% 100 Ug Ml In Mtbe 2 4 4 Trichloro 2 Hydroxydiphenyl Ether since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2020Quote: A sample of lycopodium sporopollenin (50 mg in 10 mL acetic acid; Polysciences Inc., Warrington PA) was ozonized in a similar manner ...
-
bioRxiv - Biophysics 2021Quote: ... Cells were transiently transfected at a density of 3 × 106 cells/mL using linear polyethylenimine (Polysciences). 24 h following transfection ...
-
bioRxiv - Neuroscience 2019Quote: ... DNA was mixed with 10 µl PEI (polyethylenimine, 1 mg/ml, Polysciences Europe GmbH, Eppelheim, Germany) in 500 µl MEM without supplements ...
-
bioRxiv - Microbiology 2020Quote: ... Each expression vector was transiently transfected into Expi293 cells using 1 mg/mL of polyethylenimine (Polysciences). Five days post transfection ...
-
bioRxiv - Microbiology 2023Quote: ... 300 µl (10^10 microspheres/mL) of Fluoresbrite® Multifluorescent Microspheres 0.2 µm (PolySciences 24050-5) were spread onto a bilayer plate using sterile glass beads and dried for 30 minutes ...
-
bioRxiv - Cell Biology 2023Quote: Transfections were done transiently using PEI transfection reagent (1 mg ml-1 stock, Polysciences, 24765-1), 4 µg of transfection reagent per 1 µg of plasmid ...
-
bioRxiv - Immunology 2021Quote: ... DNA transfections were performed using polyethylenimine (PEI) (1 mg/mL, linear, 25 kDa; Polysciences, Warrington, FL, USA) at a 3:1 ratio of PEI to DNA (w/w ...
-
bioRxiv - Cell Biology 2022Quote: ... HEK293T cells were incubated using 1 mg/mL of Polyethylenimine (PEI, Linear, MW 25000, Polysciences, PA, USA) at a ratio of 1:6 (DNA:PEI) ...
-
bioRxiv - Immunology 2022Quote: ... and mixed with 20 μl IMDM medium containing 1.2 μl of 1 mg/mL polyethylenimine (PEI, Polysciences). Following a 20 min incubation step at room temperature ...
-
bioRxiv - Biophysics 2022Quote: ... The transfection solution was prepared by combining 5 μL of 1 mg/ml polyethylenimine Max solution (Polysciences) and a plasmid mixture consisting of 200 ng ssHA-FLAG-NTS1 and 500 ng alkaline phosphatase (AP)-tagged TGF-α (AP-TGFα ...
-
bioRxiv - Physiology 2023Quote: ... pLNC-ER: RAS vector and packaging vectors using 1mg/mL of linear 25 kDa polyethylenimine (PEI, Polysciences). 24 hours following transfection ...
-
bioRxiv - Bioengineering 2024Quote: ... 150,000 cells/mL with 1 v/V% 500 nm fluorescent beads (Floresbrite YG carboxylate beads, Polysciences, Inc.) were encapsulated within each hydrogel on a Nunc glass bottom dish (Nunc Glass ...
-
bioRxiv - Microbiology 2024Quote: ... expression medium was added to reduce the cell density to 1.0 × 106/ml for polyethyleneimine (PEI; Polysciences) transfection ...
-
bioRxiv - Microbiology 2020Quote: ... and co-transfected with the two IgG plasmids expressing the corresponding HC and LC in a 1:1 ratio at a density of 0.8-1.2 million cells/mL in a 1:3 ratio with 1 mg/L PEImax (Polysciences). The recombinant IgG antibodies were isolated from the cell supernatant after five days as described previously (20 ...
-
bioRxiv - Neuroscience 2021Quote: ... worms were fed a 50% dilution of a 2.5% weight by volume (4.55 x 1010 particles per mL) solution of 1 µm diameter polystyrene beads (Polysciences, Inc ...
-
bioRxiv - Biophysics 2021Quote: ... Transfection solution was prepared by combining 20 μL (per dish, hereafter) of polyethylenimine solution (Polysciences; 1 mg/mL) and a plasmid mixture consisting of 500 ng Lg-βarr1 or Lg-βarr2 and 1μg μOR-Sm in 1 mL of Opti-MEM (Thermo Fisher Scientific) ...
-
bioRxiv - Physiology 2022Quote: ... 16 μg AAV-U6-sgRNA-TBG-Cre plasmid and 144 μl of 1 mg/ml Polyetherimide (PEI) (Polysciences) was mixed in 9 ml OptiMEM (Thermo) ...
-
bioRxiv - Pharmacology and Toxicology 2022Quote: ... Cells were transfected using a polyethylenimine (PEI) reagent (2.5 µl of 1 mg/ml per well hereafter; Polysciences) with these UTS2R plasmids (100 ng per well hereafter) ...
-
bioRxiv - Cancer Biology 2023Quote: ... The cells were transfected with 121.6 μL of 1 mg/mL of linear Polyethylenimine (PEI; MW 25,000; Polysciences) and 30.4 μg of plasmid DNA diluted in Opti-MEM (Gibco) ...
-
bioRxiv - Immunology 2023Quote: ... 1.2 μg of DNA was mixed with 2.4 μL of 1 mg/mL polyethylenimine (linear PEI, MW 25,000, Polysciences) in one tenth of the final culture volume of medium ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... and 5 µg of transfer plasmid were transfected with polyethylenimine (8mg/mL sterlile water, Polysciences, Warrington, PA, USA). After 60–72 h of incubation ...
-
bioRxiv - Biophysics 2024Quote: ... Cells were transfected using a polyethylenimine (PEI) agent (10 μl of 1 mg/ml per dish hereafter; Polysciences) with pCAG plasmids encoding human A1R ...
-
bioRxiv - Immunology 2021Quote: ... 480µg of each plasmid was co-transfected with 120µg of BirA (Howarth et al., 2008) and 12mg PEI-Max (1 mg/mL solution, Polysciences) in the presence of 200 µM biotin (final concentration) ...
-
bioRxiv - Cell Biology 2022Quote: ... HEK293T cells were cultured in T75 flasks and transfected at approximately 70% confluency with 7500 ng of the lentiviral vector of interest and packaging plasmids pCMV-dR8.91 (6750 ng) and pCMV-VSV-G (750 ng) with 75 µL of polyethyleneimine (PEI, 1 mg/mL; Polysciences). Approximately 72 hours after transfection ...
-
bioRxiv - Molecular Biology 2020Quote: ... HEK293T cells in a 10 cm dish were transfected with 40 µL 1.0 mg/mL polyethylenimine (Polysciences, Warrington, PA) and 15 µg plasmid and incubated for 24 h ...
-
bioRxiv - Microbiology 2021Quote: ... the pLHCX or pQXCIP packaging vector of interest and pCMV VSV-G using 1mg/ml PEI®-MAX (Polysciences). Media was replaced 16 h post-transfection and viral supernatants were harvested through a 0.45 µm filter ...
-
bioRxiv - Biochemistry 2020Quote: ... For formation of DNA:PEI complexes 1 μg DNA/mL transfection volume and 5 μg of 40 kDa PEI (Polysciences) were first diluted separately in 5% transfection volume in supplemented F17 media ...
-
bioRxiv - Biophysics 2022Quote: ... with the density of about 2.5 million cell/ml were transfected using 3 mg plasmid by poly-ethylenimine (PEI, Polysciences) with a 1:3 plasmid to PEI weight ratio ...
-
bioRxiv - Biochemistry 2023Quote: Cells were transfected with plasmid DNA (0.75 µg) using a 1:3 (w/v) ratio of DNA to polyethyleneimine “MAX” MW 40,000 (1 mg/ml, Polysciences). These were first individually diluted in 100 µl of 150 mM NaCl ...
-
bioRxiv - Biochemistry 2023Quote: ... cells were transfected with a total of 125 μg DNA encoding the full ECD per 250 mL of cells using polyethylenimine (PEI, 1:3 DNA:PEI ratio; Polysciences), according to the manufacturer’s protocol ...
-
bioRxiv - Bioengineering 2024Quote: ... cells were transfected with 0.5 μg of plasmid DNA per well using 2.5 µL of 1 mg mL−1 polyethylenimine (PEI) (Linear, MW 25,000, Polysciences Inc.). Twenty-four hours after transfection ...
-
bioRxiv - Bioengineering 2024Quote: ... Twenty-four hours after transfection with 0.5 μg of plasmid DNA per well using 2.5 µL of 1 mg mL−1 polyethylenimine (PEI) (Linear, MW 25,000, Polysciences Inc.), cells were incubated in HBSS containing 10 mM HEPES-NaOH (pH 7.4 ...
-
bioRxiv - Bioengineering 2024Quote: ... transfection was carried out using 0.5 μg of plasmid DNA and 2.5 µL of 1 mg mL−1 polyethylenimine (PEI) (Linear, MW 25,000, Polysciences Inc.). Twenty-four hours after transfection ...
-
bioRxiv - Microbiology 2020Quote: ... were transfected with the plasmid DNA diluted in PBS (0.67 μg total plasmid DNA per ml of culture) using polyethylenimine (Polysciences, Inc.) at a DNA-to-PEI ratio of 1:3 ...
-
bioRxiv - Cell Biology 2020Quote: ... and 15µg of an AAV plasmid carrying the transgene of interest were mixed in OptiMEM with PEI-MAX (final concentration 80µg/ml, Polysciences #24765). 2ml of this solution were then added dropwise to each of the 6 HEK293T 15cm2 plates ...
-
bioRxiv - Biochemistry 2019Quote: ... followed by ∼3 microliters of the final assay solution containing 5 ng mL-1 500 nm diameter beads (PolySciences Inc,), coated nonspecifically with neutravidin18(ThermoFisher Inc.).
-
bioRxiv - Microbiology 2021Quote: ... expression medium was added to reduce cell density to 1.0 × 106 ml−1 for transfection with polyethyleneimine (PEI) (Polysciences, Inc). Next ...
-
bioRxiv - Neuroscience 2020Quote: ... and light chains (CA5-VL(X3)_pHL_sec) at a 1:1 ratio using polyethyleneimine (PEI, 1 mg/ml, MW 40,000, Polysciences Cat.# 24765) transfection reagent ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were transiently transfected at a density of 3 × 10^6 cells/mL using linear polyethylenimine (Polysciences Cat# 23966-1). The media was supplemented 24 hours after transfection with 2.2 mM valproic acid ...
-
bioRxiv - Bioengineering 2020Quote: ... was applied at 1 μg/mL for 90 minutes to stain the nuclei and the samples were washed and mounted with AquaPoly/Mount (Polysciences). Whole and pseudo-islets were imaged on a Zeiss NLO LSM 710 laser scanning confocal microscope (Carl Zeiss).
-
bioRxiv - Cell Biology 2022Quote: ... Beads were incubated for 2h at RT and then washed in PBS and further incubated for 30 minutes in 1 ml 50 mM ethanolamine (Polysciences). The beads were then washed 3 times in PBS and left in PBS on a cold room rotator.
-
bioRxiv - Microbiology 2020Quote: ... Infections were performed by spinoculation for 2 hours at 1400 x g with VSVg pseudotyped HIV-1 at MOI of 5 in the presence of 1 μg/ml PEI (Polysciences) and 16 μg/ml Polybrene (Sigma-Aldrich).
-
bioRxiv - Cancer Biology 2022Quote: ... RIKEN BRC) [22] were mixed with 111 µl of 1 mg/ml PEI MAX® (pH7.5) (Cat. No. 24765-1, Polysciences) in Opti-MEM™ I Reduced Serum Medium (Cat ...
-
bioRxiv - Microbiology 2019Quote: ... expression medium was added to reduce cell density to 1.0×106 ml-1 for transfection with polyethyleneimine (PEI) (Polysciences, Inc). Next ...
-
bioRxiv - Immunology 2020Quote: ... the cells were transfected using 6 μg p509 and 6 μg p2670 plasmid DNAs (Neuhierl et al., 2002) mixed with 72 μl of a 1 mg/ml stock solution of polyethylenimine (#24765; Polysciences) in water (pH 7.0 ...
-
bioRxiv - Microbiology 2020Quote: ... The cells were incubated at 37°C for 72 hours after which cells were fixed with 1 ml of 10% formaldehyde (Polysciences) was added for 24 hours to ensure inactivation of virus ...
-
bioRxiv - Molecular Biology 2020Quote: ... Yeast strains were grown in rich medium (YPD) to mid-log phase (∼1.5×107/ml) and cross-linked with methanol-free formaldehyde (1% final concentration, Polysciences Inc) for 30 min and quenched with 0.25M final concentration of glycine (from 2.5M stock ...
-
bioRxiv - Immunology 2020Quote: Cell numbers per tissue were determined by mixing 20 µl of each single cell suspension into a 96-well plate with 50 μl of 8.4 × 104 Fluoresbrite Carboxylate YG 10 µm microspheres/ml (Polysciences Inc.) and 180 μl staining media (dPBS + 2% FBS ...
-
bioRxiv - Microbiology 2020Quote: ... at a density of 2.5 × 106 cells/ml were transfected with microbody expression vector plasmid DNA using polyethyleneimine (Polysciences, Inc) at a 1:3 plasmid:PEI ratio ...
-
bioRxiv - Immunology 2021Quote: ... HEK293F were grown to a density of ∼1.0 × 106 cells/ml and were co-transfected with heavy chain (HC) and (LC) plasmids (1:1) mixed with PEIMAX (Polysciences). After five days ...