Labshake search
Citations for Molecular Devices :
301 - 350 of 457 citations for 5 tert Butyl 3 isocyanatoisoxazole since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2022Quote: ... The assay was performed according to the manufacturer’s instructions with FlexStation® 3 Multi-Mode Microplate Reader (Molecular Devices, Sunnyvale, CA, USA). The Cyto-ID fluorescence was determined at Ex 480 nm/Em 530 nm ...
-
bioRxiv - Neuroscience 2022Quote: ... Data acquisition (digitized at 10 kHz and filtered at 3 kHz) was performed with pClamp 10.4 software (Molecular Devices, Sunnyvale, CA, USA). Input resistance and cells capacitance were measured online with the membrane test feature of the pClamp software ...
-
bioRxiv - Immunology 2020Quote: ... His-tagged RBD of SARS-CoV or SARS-CoV-2 were loaded at 3 µg/ml in KB for 15 minutes onto anti-HIS (HIS2) biosensors (Molecular Devices, ForteBio). Association of mAb and Fab was performed in KB at 15 μg/ml and 5 μg/ml respectively for 5 minutes ...
-
bioRxiv - Immunology 2022Quote: ... Caspase-3 activity was measured by Caspase-3 activity detection kit (Beyotime, China) and tested by a Flex Station II microplate reader (Molecular Devices, USA).
-
bioRxiv - Cell Biology 2023Quote: ... The effluent solutions collected from the top and bottom channels were used for fluorescence measurements using a plate reader (Flexstation 3, Molecular Devices, USA). Subsequently ...
-
bioRxiv - Neuroscience 2024Quote: ... λEM: 516 nm (F340/F380)) were measured every 4 s using a FlexStation 3 fluorescent microplate reader (Molecular Devices, Sunnyvale, CA, USA). During the measurements ...
-
bioRxiv - Neuroscience 2023Quote: ... Whole cell patch-clamp recordings from pyramidal neurons in Layer 2/3 of V1 were made using a Multiclamp 700B amplifier in voltage clamp mode and PClamp software (Molecular Devices, USA). Cells were patched with borosilicate glass electrodes with tip resistances of ∼3.5 MOhm ...
-
bioRxiv - Neuroscience 2022Quote: ... The final samples after running all the procedures were read on a multi-mode microplate reader (FlexStation 3, Molecular Devices, California, USA). The assay was performed in duplicate ...
-
bioRxiv - Neuroscience 2024Quote: Signals were digitized at 10 kHz and filtered at 3 kHz using a Multiclamp 700B amplifier and analyzed using Clampfit 10.7 software (Molecular Devices, Sunnyvale, CA). Traces were excluded from analysis of specific measures if there was spontaneous activity or instability in the section of trace needed for analysis.
-
bioRxiv - Physiology 2024Quote: ... Assays were performed following the manufacturer’s instructions in duplicate and read on a FlexStation 3 plate reader (Molecular Devices, Eugene, OR, USA). Results were determined using the FlexStation software with a 4-parameter logistic curve ...
-
bioRxiv - Neuroscience 2021Quote: ... The data was digitized at 5–500 kHz using an analog-to-digital converter (Digidata 1500; Molecular Devices). The sampling frequency was determined by the protocol used ...
-
bioRxiv - Neuroscience 2021Quote: ... The data were digitized at 5–500 kHz using an analog-to-digital converter (Digidata 1500; Molecular Devices). The whole-cell current recordings were done using pCLAMP software (version 10 ...
-
bioRxiv - Neuroscience 2021Quote: ... Signals were filtered at 5 kHz with the patch-clamp amplifier (Axopatch 1-D, Molecular Devices, Sunnyvale, CA) and sampling rate was adjusted according to the kinetics of membrane current ...
-
bioRxiv - Biophysics 2022Quote: ... The data were filtered at 5 kHz and sampled at 20 kHz (Digdata1550, Molecular Devices, Sunnyvale, CA, USA) and stored in a computer (pClamp10.6 ...
-
bioRxiv - Neuroscience 2021Quote: ... Signals were filtered at 5 kHz using a Digidata 1500A data acquisition interface (Molecular Devices, San Jose, CA) and acquired using pClamp 10.6 software (Molecular Devices) ...
-
bioRxiv - Neuroscience 2021Quote: ... Whole-cell measurements were low-pass filtered at 5 kHz using an Axopatch 200B amplifier (Molecular Devices, Inc). Recordings were digitized with the ITC-18 board (Instrutech ...
-
bioRxiv - Neuroscience 2023Quote: ... All electrophysiological data were digitized at 5-10 KHz with a Digidata 1440A data acquisition board (Molecular Devices).
-
bioRxiv - Neuroscience 2023Quote: ... The data were digitized at 5-20 kHz using an analog-to-digital converter (Digidata 1500; Molecular Devices). The whole-cell current recordings were conducted using pCLAMP software (version 10 ...
-
bioRxiv - Neuroscience 2022Quote: ... Data were acquired and filtered (at 5 kHz 4-pole Bessel filter) with MultiClamp 700B amplifier (Molecular Devices), digitized with Digidata 1440A (Molecular Devices ...
-
bioRxiv - Biochemistry 2024Quote: ... bioluminescence data were collected for ∼5 min on a SpectraMax iD3 plate reader (Molecular Devices, Sunnyvale, CA, USA). Subsequently ...
-
bioRxiv - Bioengineering 2023Quote: ... and performing an absorbance spectral scan (200–1000 nm; 5 nm increments) using a Spectramax M3 (Molecular Devices).
-
bioRxiv - Neuroscience 2022Quote: ... low-pass filtered at 5 kHz and digitally sampled at 20 kHz and analyzed with pClamp10 (Molecular Devices). Depolarizing current steps (800 msec duration ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were incubated at RT for 5 min before fluorescence was measured using a SpectraMax M5 (Molecular Devices) microplate reader with excitation/emission maxima at 490/520 nm ...
-
bioRxiv - Neuroscience 2024Quote: ... low-pass filtered (5 KHz) and digitised (Axopatch-200B, custom amplifier/filters, Digidata 1440, Clampex software; Molecular Devices). Pipettes and electrodes were positioned with Sutter MP265 and 285 manipulators with a diagonal (axial ...
-
bioRxiv - Neuroscience 2024Quote: ... Signals were filtered at 5 kHz using a Digidata 1500B data acquisition interface (Molecular Devices, San Jose, CA) and acquired using pClamp 10.6 software (Molecular Devices) ...
-
bioRxiv - Biophysics 2021Quote: ... and currents were recorded with microelectrodes filled with 3 mM KCl (pipette resistance of < 1 MΩ), OC-725C amplifier (Warner, CT, USA) and Digidata 1550 digitizer (Molecular Devices, CA, USA) at 1 kHz with 200 Hz filtering ...
-
bioRxiv - Neuroscience 2022Quote: Whole cell patch-clamp recordings were obtained from S1 layer 2/3 neurons with a Multiclamp 700B amplifier (Molecular Devices, San Jose, CA) low-pass filtered at 1.8 kHz with a four-pole Bessel filter ...
-
bioRxiv - Neuroscience 2021Quote: ... The assay involved adding 20 µL MTS reagent to each well already containing 100 µL media and incubating the plate for 3 hours before measuring the absorbance at 490 nm with a Spectra Max M2 plate reader (Molecular Devices, Sunnyvale, CA). The background absorbance of MTS in media alone was subtracted from the absorbance obtained in the presence of cells ...
-
bioRxiv - Neuroscience 2020Quote: ... Data were digitized at 20 kHz and filtered at 1 or 3 kHz using a Digidata 1440 A system with pClamp 10.2 software (Molecular Devices, Sunnyvale, CA, USA). Only cells with access resistance of <25 MΩ were retained for analysis ...
-
bioRxiv - Physiology 2020Quote: ... cells were incubated with Caspase-Glo 3/7 reagent for 30 min and luminescence was measured using a SpectrMax M5 (Molecular Devices, Sunnyvale, CA). Relative luminescence units were normalized to siCon untreated cells and are given as fold increase in caspase 3/7 activity.
-
bioRxiv - Neuroscience 2021Quote: ... Data were digitized at 20 kHz and filtered at 1 or 3 kHz using a Digidata 1440 A system with pClamp 10.2 software (Molecular Devices, Sunnyvale, CA, USA). Only cells with access resistance of <25 MΩ were retained for analysis ...
-
bioRxiv - Physiology 2022Quote: ... Images were acquired at excitation of 488 nm at the same settings and the fluorescence quantified over 3-4 fields using Metamorph Software (Molecular Devices, Downington PA). For quantitation of the vascular NLRP3 and ICAM-1 ...
-
bioRxiv - Immunology 2020Quote: ... and the reaction was stopped with sulfuric acid before measuring the absorbance at 450 nm (A450) in a FlexStation 3 microplate reader (Molecular Devices, Sunnyvale, CA). Non-specific binding to the plate was corrected by the subtraction of the A450 recorded for each chemokine concentration in wells incubated without liposome ...
-
bioRxiv - Neuroscience 2022Quote: Whole-cell current-clamp recordings were made from layer 2/3 pyramidal cells with a Multiclamp 200B or 700B amplifier (Molecular Devices, San Diego). Cortical regions and layers were identified using IR video microscopy (Olympus ...
-
bioRxiv - Cancer Biology 2024Quote: ... Caspase 3/7 activity is measured as arbitrary fluorescent unit (AFU) using a SpectraMax Mini plate reader (Molecular Devices, San Jose, CA, USA).
-
bioRxiv - Neuroscience 2023Quote: ... Signals were filtered at 3 KHz and sampled at 10 KHz with a Digidata 1500A analogue-to-digital conversion card (Molecular Devices, Sunnyvale, CA). Mice embryonic cortex neurons cultured in vitro between 7-14 days were recorded as a positive control ...
-
bioRxiv - Neuroscience 2023Quote: ... Recordings were made with pClamp 10.3 software using a MultiClamp 700B amplifier set with 4 kHz low-pass Bessel filter and 10 kHz digitization (Molecular Devices, Sunnydale, CA). The light beam of the same laser was directed at the preparation using an 200μm optic fiber submerged into the bath with light beam aimed at the STN ...
-
bioRxiv - Microbiology 2024Quote: ... calcein release in 10-fold serial dilutions of liposome samples after incubation with CAB containing 0.5% Triton X-100 was first titrated using a FlexStation 3 microplate reader (Molecular Devices, San Jose, CA). Liposome sample volumes causing a 5 to 10-fold increase in the calcein fluorescent signal (ex = 485 nm ...
-
bioRxiv - Neuroscience 2020Quote: ... Images were acquired at 37°C in a temperature-controlled chamber under 5% CO2 using Metamorph software (Molecular Devices), for periods of 10 min with a confocal Z-series stack of 10μm (921×1024 pixels ...
-
bioRxiv - Biophysics 2022Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Biophysics 2021Quote: ... Data was filtered at 5 kHz and recorded at a 200 kHz sampling rate with program Clampex (Molecular Devices). Experiments were carried out in symmetrical 200 mM KCl ...
-
bioRxiv - Biophysics 2023Quote: ... Signals were filtered at 5 kHz and sampled at 20 kHz prior to acquisition with Clampex 10.6 (Molecular Devices). A voltage step protocol using a holding potential of 0 mV for 0.2 s was performed prior to 20 mV incremental voltage steps ...
-
bioRxiv - Neuroscience 2022Quote: ... These signals were recorded in frequencies of 0 - 5 kHz and digitized at 50 kHz (Digidata 1322A, Molecular Devices). For assessing evoked synaptic field potentials ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were stained with the FLIPR calcium indicator Calcium 5 Assay Kit (Molecular Devices Corp., Sunnyvale, CA, USA) to image the Ca2+-transients evoked by capsaicin addition ...
-
bioRxiv - Neuroscience 2024Quote: ... Data were filtered at 1 kHz and sampled at 5 kHz with Digidata 1322A interface and Clampex 9.2 and 10.6 from pClamp software (Molecular Devices). Pipettes (from borosilicate capillaries ...
-
bioRxiv - Neuroscience 2024Quote: ... Current signals were low-pass filtered at 5 kHz and sampled at 20 kHz using pCIamp10.3 or 10.7 (Molecular Devices). Series resistance was compensated between 85 – 90% in experiments for Figures 1-5 ...
-
bioRxiv - Biophysics 2024Quote: ... Voltage clamp data were digitized at 5 kHz (Axon Digidata 1550B via a digital Axoclamp 900A commander, Molecular Devices) and collected using pClamp 10 (Axon Instruments) ...
-
bioRxiv - Neuroscience 2023Quote: ... a measurement (Ex412/Em480) taken every 5 sec for 600 sec on a SpectraMax M5 multimode reader (Molecular Devices).
-
bioRxiv - Neuroscience 2024Quote: ... 3 - 5 ms (DAPI), 150 - 250 ms (GFP) and 2,000 - 3,000 ms (Cy3, Cy5, mCherry) using MetaMorph software (Molecular Devices) at 0.133 µm/pixel (Figure 1) ...
-
bioRxiv - Cell Biology 2022Quote: ... Fluorescence of C11-BODIPY™ 581/591 was measured by simultaneous acquisition of the green (484/510 nm, oxidized) and red signals (581/610 nm, reduced) with FlexStation® 3 Multi-Mode Microplate Reader (Molecular Devices, Sunnyvale, CA), and the ratio of green/red fluorescence was determined as a measure of oxidation of C11-BODIPY™ 581/591.