Labshake search
Citations for Molecular Devices :
751 - 800 of 887 citations for Proteasome 26S Subunit Non ATPase 10 PSMD10 Antibody since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Pathology 2023Quote: ... Membrane voltage and current were low-pass filtered at 2–5 kHz and acquired at 10–20 kHz (Digidata 1550; Molecular Devices). All electrophysiological experiments were performed at room temperature (22–25 °C) ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... Signals were low pass filtered (Bessel, 2 kHz) and collected at 10 kHz using the data acquisition software pClamp 11 (Molecular Devices). Electrophysiological recordings were extracted and analyzed using Clampfit (Molecular Devices ...
-
bioRxiv - Neuroscience 2023Quote: ... Signals were recorded at 100 kHz sample rate and filtered with a 10 kHz low-pass Bessell filter using pClamp 11 software (all equipment from Molecular Devices). Patch pipettes were fabricated with a P-80C pipette puller (Sutter Instruments ...
-
bioRxiv - Neuroscience 2023Quote: ... Data were sampled at 10 kHz and low-pass-filtered at 3 kHz using Multiclamp 700B amplifier (Molecular Devices, version 2.2.2.2). Data were analyzed in EasyElectrophysiology (version 2.5.1 ...
-
bioRxiv - Molecular Biology 2023Quote: ... selection was performed using semi-solid medium D (StemCell, 03804) and the colonies were picked after 10-14 days using ClonePix2 (Molecular Devices). The isotypes of antibodies generated from hybridoma clones were determined using Pierce mouse Ig isotyping kit (Thermo Fisher 26178) ...
-
bioRxiv - Biochemistry 2023Quote: ... under 40x water-immersion lens and recorded in the whole-cell configuration using a MultiClamp 700B amplifier (2 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 11 software (Molecular Devices). Patch pipettes were pulled from OD/ID 1.5/0.86 mm capillary glass in a horizontal pipette puller (Model P-1000 ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples incubated an additional 10 minutes at RT prior to reading Abs620 nm values using a FlexStation plate reader (Molecular Devices). Data were imported into R.Studio where the phosphate standards were used to generate a phosphate standard curve ...
-
bioRxiv - Biochemistry 2023Quote: Assays on membranes were carried out in 10 mM Tris-SO4 (pH 7.4) and 250 mM sucrose at 32 °C in a SPECTRAmax PLUS384 spectrophotometer (Molecular Devices, UK) using 10 μg-protein mL-1 membranes supplemented by 1.5 μM horse heart cytochrome c and 15 μg mL-1 alamethicin ...
-
bioRxiv - Neuroscience 2023Quote: ... The current and voltage signals were recorded and digitized with a MultiClamp 700B amplifier and Digitdata 1440 controlled by Clampex 10 data acquisition software (Molecular Devices).
-
bioRxiv - Biochemistry 2023Quote: ... 20-fold diluted NanoLuc substrate was added (diluted by PBS, 10 µl/well) and bioluminescence was immediately measured on a SpectraMax iD3 plate reader (Molecular Devices). The measured bioluminescence data were expressed as mean ± SD (n = 3 ...
-
bioRxiv - Neuroscience 2023Quote: ... digitized at a rate of 20 kHz (ITC-18 computer interface instrutech corporation / National Instruments USB-6343) and obtained with either PClamp 10 (Molecular Devices) or MIES (Allen institute ...
-
bioRxiv - Molecular Biology 2023Quote: Recordings were conducted at -60 mV holding voltage using a Multiclamp 700b amplifier and Digidata 1440 digitizer with pClamp 10 recording software (Molecular Devices). After sealing the cells ...
-
bioRxiv - Genomics 2023Quote: ... The resultant CALIMA output was further processed using Clampfit (Axon™ pCLAMP™ 10 Electrophysiology Data Acquisition & Analysis Software, Molecular Devices), employing Gaussian curve fitting to analyze the calcium transients ...
-
bioRxiv - Biochemistry 2023Quote: ... Immediately after, the kinetic absorbance at 370nm (10 min, 30 – 60s interval) was measured in a SpectraMax i3x plate reader (Molecular Devices), and the results plotted in Prism 9.0 (Graphpad) ...
-
bioRxiv - Biophysics 2023Quote: ... The signals were filtered at 10 kHz and digitized at sampling rate of 20 kHz with an Axon Digidata 1550B digitizer (Molecular Devices) using Clampex 11 Software (part of pCLAMP 11 ...
-
bioRxiv - Immunology 2023Quote: ... Sampling was performed at 10 kHz with a 5 kHz low-pass band filter using an Axopatch 200B amplifier (Molecular Devices). All electrophysiology experiments were conducted at RT (∼23°C) ...
-
bioRxiv - Biophysics 2023Quote: ... Voltage commands were applied with a MultiClamp 700B amplifier (Axon Instruments, Sunnyvale, CA, USA) through a Digidata 1440/1550B interface with CLAMPEX 10/11 suite (Molecular devices). Three current traces were acquired at 50 kHz ...
-
bioRxiv - Neuroscience 2024Quote: ... Electrical signals were acquired at 10 kHz and low-pass filtered at 3 kHz using a Multiclamp 700B or Multiclamp 700A amplifier (Molecular Devices) and Symphony Data Acquisition software (http://symphony-das.github.io) ...
-
bioRxiv - Neuroscience 2024Quote: ... Data were filtered by a low-pass Bessel filter at 3 kHz and sampled at 10 kHz using an Axon Digidata 1322A digitizer (Molecular Devices).
-
bioRxiv - Cell Biology 2024Quote: ... The solubilised melanin was read against a blank of 1M NaOH/10 % v/v DMSO at 405 nm in a SpectraMax 340 spectrophotometer (Molecular Devices). The absorbance was compared to a standard curve of absorbance of known concentrations of synthetic melanin to determine melanin content ...
-
bioRxiv - Neuroscience 2024Quote: ... Electrical signals were digitized and sampled at 10 ms intervals with the Digidata 1550 data acquisition system and the Multiclamp 700B Amplifier (Molecular Devices) using the pClamp10.2 software ...
-
bioRxiv - Neuroscience 2024Quote: ... The recordings were made with an Axoclamp 900A amplifier using Clampex 10 software and digitized with a Digidata 1440 (Molecular Devices, LLC. ...
-
bioRxiv - Physiology 2024Quote: ... Data were filtered at 5 kHz and digitized at 10 kHz using an Axon Digidata 1550 and the pClamp10 software (Molecular Devices).
-
bioRxiv - Synthetic Biology 2024Quote: ... and fluorescence (ex. 360 nm, em. 460 nm) was measured over 10 minutes on a SpectraMax i3X plate reader (Molecular Devices). 20 µL of 200 nM PTP1B ...
-
bioRxiv - Synthetic Biology 2024Quote: ... and fluorescence (ex. 360 nm, em. 460 nm) was measured over 10 minutes on a SpectraMax i3X plate reader (Molecular Devices). 5 mM DiFMUP alone was used as a control ...
-
bioRxiv - Molecular Biology 2024Quote: ... Currents were recorded by a Warner OC-725C amplifier and digitized by a Digidata 1550 A with Clampex 10 software (Molecular Devices). Currents were sampled at 500 Hz and filtered at 100 Hz ...
-
bioRxiv - Neuroscience 2024Quote: ... The number of negative spikes was automatically analyzed using Clampfit V11.2 software during a 10 min interval in the middle of each analysis period (Molecular devices, USA) (see Figure 8A).
-
bioRxiv - Neuroscience 2024Quote: ... Spontaneous EPSCs and IPSCs were recorded in the whole-cell voltage clamp configuration at a holding potential of -70 mV and sampled at 10 kHz and filtered at 2 kHz using an Axopatch 200B amplifier and Digidata 1322A digitizer (Molecular Devices). The pipette internal solution for sEPSC contained (in mM) ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... were made using a MultiClamp 700B amplifier (2 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 11 software (Molecular Devices).
-
bioRxiv - Neuroscience 2024Quote: ... Data acquisition occurred at 10 kHz sampling rate through a MultiClamp 700B amplifier connected to a Digidata 1440A digitizer (Molecular Devices). Data were processed using Clampfit v11.0.3.03 (Molecular Devices ...
-
bioRxiv - Neuroscience 2024Quote: ... traces were digitized with a sampling rate of 5 kHz and low-pass filtrated at 10 Hz (Digidata 1440, Molecular Devices Corporation ...
-
bioRxiv - Neuroscience 2024Quote: ... Signals were filtered at 3 kHz using a Bessel filter and digitized at 10 kHz with Digidata 1550 analog-to-digital interface (Molecular Devices). The recorded traces were analyzed using the Clampfit 10 software (Molecular Devices).
-
bioRxiv - Neuroscience 2024Quote: ... Electrophysiological data were sampled at 20 kHz and filtered at 3 kHz using a Digidata 1550 analogue to digital converter and pClamp 10 software (Molecular Devices). Upon the formation of a GΩ seal ...
-
bioRxiv - Immunology 2024Quote: ... Changes in absorption were monitored at 450 nm at room temperature for 10 minutes with a SpectraMax 190 plate reader spectrophotometer (Molecular Devices).
-
bioRxiv - Plant Biology 2024Quote: ... Fluorescence spectra were collected using an excitation of 360 nm and emission wavelengths of 400–650 nm with 10 nm increments at 25 °C with a SpectaMax Paradigm (Molecular Devices) instrument ...
-
bioRxiv - Immunology 2024Quote: ... Staining solution was replaced by live-cell visualization medium DMEMgfp-2 with 10 % FCS and images were acquired with a MetaXpress Micro XL system (Molecular Devices) at 20 x magnification.
-
bioRxiv - Immunology 2024Quote: ... Supernatant from co-culture assays was mixed in a 1:1 ratio with PBS 10 µM CTZ and luminescence was read using a SpectraMax M3 microplate reader (Molecular Devices).
-
bioRxiv - Microbiology 2024Quote: ... Cells were imaged every 30 seconds for 60 minutes on a Nikon Eclipse TE300 inverted fluorescent microscope with a 10× objective and an automated stage using MetaMorph software (Molecular Devices). Automated cell tracking analysis was done using JEX software [62] to calculate chemotactic index and velocity and to generate representative rose plots for migration patterns.
-
bioRxiv - Biochemistry 2024Quote: ... The plate was mixed on a plate shaker for 10 minutes and absorbances were recorded at 412 nm (Molecular Devices SpectraMAX). To correlate the appearance of yellow with the absolute concentration of CoA and to determine the dynamic range of the assay ...
-
bioRxiv - Biochemistry 2024Quote: ... Absorbance at 412 nm wavelength was monitored every 5 seconds for 10 minutes at 37°C using a Flex3 microplate reader (Molecular Devices). A standard curve was created using CoA (Avanti ...
-
bioRxiv - Biophysics 2024Quote: ... Data were acquired at 50 kHz and low–pass filtered at 5–10 kHz (Axon 200B and Digidata 1550A; Molecular Devices). Pipette holding potential was -100 mV ...
-
bioRxiv - Biophysics 2024Quote: ... Pressure-induced currents were recorded at 10 kHz in the voltage-clamp mode using an Axopatch 200B amplifier and digitized using a Digidata 1550B (Molecular Devices). After confirming the presence of pressure-induced currents ...
-
bioRxiv - Neuroscience 2020Quote: ... All recordings were sampled at 10 kHz and filtered with a 5 kHz low-pass filter using an Axopatch 200B amplifier (Molecular Devices, U.S.A.) and AxoGraph ...
-
bioRxiv - Neuroscience 2020Quote: ... Light pulses of 1-10 ms triggered by a TTL (transistor-transistor logic) signal from the Clampex software (Molecular Devices; Sunnyvale, CA) were delivered through a 63x objective and used to evoke synaptic transmission ...
-
bioRxiv - Developmental Biology 2021Quote: ... at a final dilution of 1:10 followed by incubation for half an hour and quantitation with a scanning multi-well spectrophotometer (SpectraMax-Molecular Devices, USA).
-
bioRxiv - Neuroscience 2020Quote: ... and current clamped recordings were made using a MultiClamp 700B amplifier (2 kHz low-pass Bessel filter and 10 kHz digitization) with pClamp 10.3 software (Molecular Devices, Sunnyvale, CA). Firing rate was determined before breaking into the cell under cell attached mode for at least 60 seconds of continuous activity ...
-
bioRxiv - Neuroscience 2020Quote: Signals were digitized at 10 kHz and filtered at 3 kHz using a Multiclamp 700B amplifier and analyzed using Clampfit 10.7 software (Molecular Devices, Sunnyvale, CA). For all measures ...
-
bioRxiv - Microbiology 2021Quote: ... The reaction was stopped by adding 50μl/well of 10% HCl and the optical density (OD) measured at 490nm using a SpectraMax M3 (Molecular Devices, LLC, USA). A standard curve was generated by adding Fh15 to a negative baseline plasma sample with different concentrations of Fh15 ranging from (1μg/ml to 61.03pg/ml) ...
-
bioRxiv - Neuroscience 2022Quote: ... acquired at a sampling rate of 10 kHz with 20s intervals using MultiClamp 700B amplifier with pClamp 10.0 software (Molecular Devices, Sunnyvale, CA). Standard off-line analyses of the data were conducted using Clampfit 10.0 software (Molecular Devices ...
-
bioRxiv - Neuroscience 2022Quote: ... and signals were filtered at 10 kHz and digitized at 50kHz using Digidata1440A and pCLAMP v10 software (Molecular Devices, Sunnyvale, CA, USA). BK currents were activated with a voltage protocol stepped from a holding potential of −100 mV stepping to +250 mV with +10 mV increments for 30 ms and back to −100 mV for 15 ms to generate tail currents ...