Labshake search
Citations for 3M :
251 - 300 of 2197 citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2024Quote: ... The skin incision was closed using Vetbond (3M).
-
bioRxiv - Neuroscience 2024Quote: ... Brains were placed in a custom-built holder immersed in Fluorinert (FC-3283, 3M, St. Paul, MN, USA) and imaged with a 4.7-T Agilent MRI system with a 3.5 cm diameter quadrature volume RF coil ...
-
bioRxiv - Neuroscience 2024Quote: ... Tissue adhesive (3M Vetbond) was applied around the 3 mm coverslip ...
-
bioRxiv - Neuroscience 2024Quote: ... the skull was scrubbed with 3% H2O2 and covered with a thin layer of cyanoacrylate glue (Vetbond, 3M). Bilateral craniotomies were drilled over the BLA and 26-gauge(G ...
-
bioRxiv - Neuroscience 2024Quote: ... After insertion we sealed the gap between the cannula and the skull using n-butyl cyanoacrylate adhesive (Vetbond, 3M), before covering the area with dental cement (Metabon ...
-
bioRxiv - Neuroscience 2024Quote: ... the PMMA/THVP preform was fabricate by rolling 200 µm-thick THVP film (3M Dyneon THVP 2030GZ ...
-
bioRxiv - Neuroscience 2024Quote: ... The skull was coated with adhesive resin cement (RelyX Ultimate, 3M) to secure the exposed bone ...
-
bioRxiv - Neuroscience 2024Quote: ... and surgical adhesive (Vetbond, 3M) was applied around the edges of the cranial window frame to adhere the implant to the skull ...
-
bioRxiv - Neuroscience 2024Quote: ... and the rest of the attachment site and edges of the skin incision were secured with skin adhesive (Vetbond, 3M). The final head-plate and dental acrylic structure created a well for the containment of Ringer’s solution (in mM ...
-
bioRxiv - Neuroscience 2024Quote: ... The optical waveguide preform was fabricated by hot-pressing THVP pellets (3M Dyneon, THVP 2030GZ) into a 200 µm-thick film (160°C ...
-
bioRxiv - Biochemistry 2024Quote: ... A malachite green working solution (3.2 mM malachite green carbinol hydrochloride [Sigma Aldrich] in 3M H2SO4 complemented with a final concentration of 1.5% ammonium molybdate and 0.17% Tween-20 ...
-
bioRxiv - Biochemistry 2024Quote: ... Proteins in the lower aqueous phase were dried in the oven and dissolved in 200 µl NaOH/SDS (0.3M/0.1%). The protein concentration was determined using the Pierce BCA Protein Assay Kit (Thermo Fisher Scientific ...
-
bioRxiv - Plant Biology 2024Quote: ... The fresh urediniospores of PSTv-37 were mixed with Novec 7100 fluid (3M Inc., St. Paul, MN, USA) at a ratio of 10 mg/mL and evenly sprayed on wheat plants at 2-leaf stage with an atomizing sprayer ...
-
bioRxiv - Bioengineering 2024Quote: ... Microemulsions were generated in a flow-focusing droplet generator (50 x 50 μm) with flow rates of 1.08 mL/h for the oil phase composed of Novec HFE-7500 (3M) with 2.5% 008-FluoroSurfactant (RAN Biotechnologies ...
-
bioRxiv - Bioengineering 2024Quote: ... A reference electrode (3M Ag/AgCl) was introduced into the cathode chamber for the three-electrode setup ...
-
bioRxiv - Bioengineering 2024Quote: ... Chips were fabricated by stacking poly (methyl methacrylate) (PMMA) layers cut with laser cutter (Epilog-MINI) and bonded with double side adhesive (3M, 468MP, USA). Sterilization of microfluidic chips was performed by 70% ethanol and 30 minutes of UV exposure in laminar flow cabinet.
-
bioRxiv - Bioengineering 2024Quote: ... in Novec HFE-7500 (3M) and placing them on a hot plate (80°C ...
-
bioRxiv - Neuroscience 2024Quote: ... the skin overlying the skull was removed and the edges of the skin were secured with tissue adhesive (Vetbond, 3M). The overlying connective tissue on the skull was removed and a layer of transparent dental cement (C&B Superbond ...
-
bioRxiv - Immunology 2024Quote: ... After placing animals within the aperture of the PET scanner ECG electrodes (3M, St. Paul, MN, USA) were placed on both forepaws and the left hind paw and ECG was recorded using a dedicated physiological monitoring system (BioVet ...
-
bioRxiv - Developmental Biology 2024Quote: ... The fixation was quenched with the addition of 50 µl of quench buffer (Cytoskeleton Buffer with 0.3M glycine, pH 6.1). Immediately after ...
-
bioRxiv - Bioengineering 2024Quote: ... Waterproof polyurethane sealant (3M Marine Adhesive Sealant Fast-Cure 5200, 3M Inc.) bonded the electrolyte reservoir to the membrane ...
-
bioRxiv - Bioengineering 2024Quote: ... Waterproof polyurethane sealant (3M Marine Adhesive Sealant Fast-Cure 5200 ...
-
bioRxiv - Bioengineering 2024Quote: ... The wounds were immediately covered with Tegaderm (3M, USA, Cat. No. 1642W) with silicone adhesive (Vapon ...
-
bioRxiv - Biochemistry 2024Quote: ... precipitated at sodium salts (3M NaOAc pH 5.2, isopropanol) and dissolved in water ...
-
bioRxiv - Biophysics 2024Quote: ... The supernatants were desalted and fractionated using home-made C18 stage tips (3M Empore) packed with poros oligo R3 (Thermo Scientific ...
-
bioRxiv - Cancer Biology 2024Quote: ... The incision was closed using Vetbond (3M, St. Paul, MN, #1469SB) and the mice were observed until full recovery from anesthesia on a heated surface ...
-
bioRxiv - Bioengineering 2024Quote: ... The oil [HFE-7500 (3M) and 2.5% wt PEG-PFPE surfactant (Dapu Biotechnology)] and prepared aqueous solutions were stored in 1-mL plastic syringes and connected to the microfluidic chip mounted on the microscope through plastic tubing (SCI PE/2) ...
-
bioRxiv - Neuroscience 2024Quote: ... and then embedded in a gel embedding solution (0.5% of 10% w/v ammonium persulfate, 0.05% TEMED, 4% 19:1 acrylamide/bis-acrylamide solution, 0.3M NaCl, 0.06M Tris PH8), followed by overnight incubation with tissue clearing solution (2X SSC ...
-
bioRxiv - Neuroscience 2024Quote: The resulting supernatants were desalted and fractionated using custom-made C18 stop-and-go-extraction (STAGE) tips (3M Empore) packed with porous oligo R3 resin (Thermo Scientific) ...
-
bioRxiv - Plant Biology 2024Quote: ... sealed with micropore tape (3M), and placed in a chamber on a 10 h light/14 h dark cycle ...
-
bioRxiv - Neuroscience 2024Quote: ... we proceeded to elute antibodies from the tissue by rinsing it for 10min in ddH2O at RT and applying an elution buffer (0.5M L-Glycine, 3M Urea, 3M Guanidine Hydrochloride ...
-
bioRxiv - Neuroscience 2024Quote: ... we proceeded to elute antibodies from the tissue by rinsing it for 10min in ddH2O at RT and applying an elution buffer (0.5M L-Glycine, 3M Urea ...
-
bioRxiv - Neuroscience 2024Quote: ... These were further solubilized in lysis buffer (8M Urea, 3M Thiourea, 4% CHAPS). Plasma membrane samples were solubilized carefully in a solubilization buffer.
-
bioRxiv - Microbiology 2024Quote: ... after which 10 μl of 10% TFA was added and samples were ready for StageTipping using C18 as resin (Empore, 3M, USA). For analysis ...
-
bioRxiv - Genomics 2024Quote: ... barcode correction using correct (--B 3M-february-2018-REVERSE-COMPLEMENTED.txt.gz -M 2 --method percentile –percentile [sample_specific_value]) ...
-
bioRxiv - Genomics 2024Quote: ... reference 10x barcodes provided by PacBio were used (https://downloads.pacbcloud.com/public/dataset/MAS-Seq/REF-10x_barcodes/3M-february-2018-REVERSE-COMPLEMENTED.txt.gz) ...
-
bioRxiv - Microbiology 2024Quote: ... Three layers of C18 Empore filter discs (3M) were used to prepare the stage tips and peptide purification was performed ...
-
bioRxiv - Neuroscience 2024Quote: ... whereas AD cases (n = 9, 6F/3M) had extensive tau pathology in the neocortex (Braak V/VI ...
-
bioRxiv - Microbiology 2024Quote: ... placed onto a double-sided adhesive copper tape (3-6-1182; 3M) adhered to indium tin oxide-coated glass slides (Bruker Daltonics ...
-
bioRxiv - Immunology 2024Quote: ... mice received a topical dose of 62,5mg of Imiquimod cream (5%) (Aldara; 3M Pharmaceuticals) on the shaved back skin for 7 consecutive days ...
-
bioRxiv - Developmental Biology 2024Quote: ... 176141)] on a chamber composed of a Gel Slick-treated glass slide and 1-layer Scotch Magic Tape spacers (∼56 µm, 3M, #810) (see details in (39)) ...
-
bioRxiv - Zoology 2024Quote: ... and secured with Vetbond™ (3M Company) (Fig 4A).
-
bioRxiv - Zoology 2024Quote: ... The 3-mm protruding part of the resected occipital bone was overlaid on the parietal and interparietal bones comprising the skull and secured using Vetbond™® (3M Company) (Fig 1B) ...
-
bioRxiv - Plant Biology 2024Quote: ... At first a negative imprint of the inflorescence was created by mixing the two-component vinyl polysiloxane impression material (Express™ 2Ultra Light Body Quick, 3M ESPE) and pushing the dissected inflorescence into the impression material ...
-
bioRxiv - Synthetic Biology 2024Quote: ... coli were grown in Luria-Bertani (LB) liquid medium (3M NaCl ...
-
bioRxiv - Molecular Biology 2024Quote: ... Cometslides were immersed into running buffer (0.3M NaOH, 1mM EDTA, pH=13) for 1h at 4°C followed by gel electrophoresis at 300mA for 30 min ...
-
bioRxiv - Immunology 2024Quote: ... urea (3M; 57-13-6, Merck Millipore) was added for 10 minutes to break the AMPK-Sestrin2 binding followed by incubation with the anti-Sestrin2 antibody (1:100 ...
-
bioRxiv - Immunology 2024Quote: ... washed and then analysed for binding strength with or without Urea at various concentration (3M or 6M), to monitor interaction strength.
-
bioRxiv - Immunology 2024Quote: ... and the skin was further sealed with a tissue adhesive (3M Vetbond Cat # 1469SB), after an ethanol solution application ...
-
bioRxiv - Molecular Biology 2024Quote: ... and desalted using EmporeTM C18 Extraction Disks (3M). Peptides were eluted with 80% acetonitrile/0.1% formic acid ...