Labshake search
Citations for 3M :
101 - 150 of 2197 citations since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Developmental Biology 2024Quote: ... Six pituitaries (3M:3F) were pooled for samples from newborn mice ...
-
bioRxiv - Cell Biology 2024Quote: ... with or without competing sugar: N-acetyl-D-galactosamine (GalNAc, 0.3M, Sigma) for VVA and D(+)-galactose (0.3M ...
-
bioRxiv - Cell Biology 2024Quote: ... for VVA and D(+)-galactose (0.3M, Formedium) for PNA ...
-
bioRxiv - Bioengineering 2024Quote: ... Ag/AgCl (3M KCl) was purchased from BASi (IN ...
-
bioRxiv - Physiology 2024Quote: ... Two bone screws (2mm long, 1.2 x 0.25 mm thread, McMaster-Carr) and dental cement (RelyX Unicem Resin, 3M, 56830) were used to anchor the guide cannula to the skull ...
-
bioRxiv - Bioengineering 2024Quote: ... and 5% (w/w) PEG-PFPE surfactant (Ran Biotechnologies) in HFE 7500(3M) were loaded into three syringes and placed on syringe pumps ...
-
bioRxiv - Bioengineering 2024Quote: ... The three syringes and two syringes filled with 10 mL of 5% (w/w) PEG-PFPE surfactant (Ran Biotechnologies) in HFE 7500(3M) HFE 7500 were connected to the microfluidic devices ...
-
bioRxiv - Neuroscience 2024Quote: ... A 4 mm glass coverslip (Warner instruments) was placed over the exposed brain and sealed in place with tissue adhesive (3M Vetbond). The sealed window was then stabilized with high-viscosity cyanoacrylate superglue (Loctite) ...
-
bioRxiv - Neuroscience 2024Quote: ... We thus used an outlier detection procedure to identify those turns for which r exceeded a threshold rthresh = Q3 + exp(3M) ∗ 1.5 ∗ IQR ...
-
bioRxiv - Neuroscience 2024Quote: ... NY) and the skin was closed over the top of the probe using Vetbond tissue adhesive (3M, Saint Paul, MN).
-
bioRxiv - Neuroscience 2024Quote: ... The incision was sutured with Vicryl sutures and sealed with Vetbond (3M) after all craniotomies and injections had been made ...
-
bioRxiv - Neuroscience 2024Quote: ... bluelight-curing cement (3M RelyX Unicem 2) was applied to affix the base of the docking module to the skull ...
-
bioRxiv - Neuroscience 2024Quote: ... and dental cement (SuperBond C&B Kit, Hentschel-Dental) and the skin was closed around the implant with surgical glue (Vetbond, 3M, #1469SB).
-
bioRxiv - Neuroscience 2024Quote: ... the implant was sealed using UV cement (3M RelyX Unicem 2 Automix), then covered with Super-Bond polymer ...
-
bioRxiv - Neuroscience 2024Quote: ... 5 um/s insertion speed) and secured to the skull using UV-cured dental cement (3M RelyX A2 Universal). The loose end of the silver wire was looped around the ground screw and tightened while visualizing the signal on SpikeGLX (https://billkarsh.github.io/SpikeGLX ...
-
bioRxiv - Neuroscience 2024Quote: ... After exposing the surface of the skull a RIVETS head-post (Osborne and Dudman, 2014) was attached to the skull with UV curing resin cement (RelyX™ Unicem, 3M). For electrical grounding ...
-
bioRxiv - Neuroscience 2024Quote: ... the implant was sealed using dental cement and/or UV cement (3M RelyX Unicem 2 Automix), ensuring that only the docking module was cemented.
-
bioRxiv - Neuroscience 2024Quote: ... Cyanoacrylate (Vetbond, 3M) was applied between the skull and the remaining scalp ...
-
bioRxiv - Neuroscience 2024Quote: ... A small well was made around the craniotomy using UV curing cement (3M RelyX Unicem 2 Automix). The dura was removed and a Neuropixels 2.0α or 2.0 ...
-
bioRxiv - Neuroscience 2024Quote: ... Dolni Brezany (49.96321N, 14.4585E; 3M+4F), Hodkovice (49.97227N ...
-
bioRxiv - Cell Biology 2024Quote: ... The beads were then washed with PBS and then crosslinking solution (20mM dimethyl pimelimidate, 0.3M HEPES in ice cold water). The beads were then incubated in crosslink solution for 10 minutes at room temperature ...
-
bioRxiv - Cell Biology 2024Quote: Stage tips were prepared by inserting three Empire C18 disks (3M) inside a p200 pipette tip ...
-
bioRxiv - Immunology 2024Quote: ... and mounted on a 12 × 25 mm plastic base plate with a raised 12 mm circular plate using Vetbond (3M; Cat#1469SB). 10 µL of sterile pre-warmed HBSS buffer with Ca+ and Mg+ (Gibco ...
-
bioRxiv - Developmental Biology 2024Quote: ... the southern face of the trunk and all the branches were covered using aluminium tape (425,3M, Saint Paul, Minnesota, USA). On branches ...
-
bioRxiv - Developmental Biology 2024Quote: ... dental cement (Catalog number 56877, 3M Relyx U200) was applied over the exposed skull using a sterile toothpick while being careful to not get it on the optical window ...
-
bioRxiv - Microbiology 2024Quote: ... wounds were covered with semi-occlusive transparent Tegaderm® (3M, St. Paul, MN) secured using the liquid adhesive Mastisol® (Eloquest Health care ...
-
bioRxiv - Immunology 2024Quote: ... secured with tissue adhesive (Vetbond; 3M) and the skin sutured closed ...
-
bioRxiv - Immunology 2024Quote: ... the heads were placed in a tube with fluorinert (3M, MN, USA). Anatomical FSE T2w (Spatial Resolution ...
-
bioRxiv - Immunology 2024Quote: ... Bone wax (SMI Z046) was used to cover the burr hole and the incision was closed with Vetbond tissue adhesive (3M 1469SB). Mice were allowed to recover on a heating pad and monitored daily until the 16-day experiment endpoint.
-
bioRxiv - Immunology 2024Quote: ... Cell pellets containing the expressed NP constructs were resuspended in lysis buffer (50mM NaH2PO4, pH 7.0, 500mM NaCl, 3M Urea, and 5mM β-mercaptoethanol), supplemented with 1 mM phenyl-methyl sulphonyl fluoride (PMSF ...
-
bioRxiv - Immunology 2024Quote: ... in HFE-7500 (3M™ Novec™ 7500 Engineered Fluid). The mixture was centrifuged for 5 minutes at 2,000 g at 4°C ...
-
bioRxiv - Immunology 2024Quote: ... was diluted in water with increasing salt concentrations (titration of 1.8M, 2M, 2.2M, 2.4M, 2.6M, 2.8M, 3M, 3.2M, 3.4M, 3.6M and 4M NaCl) to induce Z-DNA conformation ...
-
bioRxiv - Bioengineering 2024Quote: ... The PDMS spacer mold is held together using double sided tape (3M) and binder clips ...
-
bioRxiv - Biochemistry 2024Quote: ... Empore C8 extraction disks were purchased from 3M (St. Paul, MN). MS grade Lys-C (lysyl endopeptidase ...
-
bioRxiv - Biochemistry 2024Quote: ... in HFE-7500™ (3M™ Novec™).
-
bioRxiv - Biophysics 2024Quote: ... by double sided tape (3M). The channels were first incubated with anti-digoxigenin nanobodies (AntiDig-Fab ...
-
bioRxiv - Bioengineering 2024Quote: ... open channel CCs were sealed with a pressure adhesive tape (9795R microfluidic tape, 3M, Perth, Ontario, Canada) to encapsulate the microchannels.
-
bioRxiv - Biophysics 2024Quote: ... The home-made chamber was assembled on a 22 × 40 mm2 glass cover slide with a pair of parallel copper strips (3M, Cergy-Pontoise, France) located 1 mm apart from each other (see Figure S6b) ...
-
bioRxiv - Biophysics 2024Quote: ... This involved attaching two narrow strips of double-sided tape (Scotch Double Sided Tape, 3M, Saint-Paul, USA) to an microscope slide ...
-
bioRxiv - Bioengineering 2024Quote: ... at 4°C with 1:400 goat anti-mouse secondary antibody in blocking buffer (10% goat serum, 1% bovine serum albumin, 0.1% sodium citrate, 0.25% Tween-20, 0.25% Triton-X, and 0.3M glycine in 1x phosphate-buffered saline ...
-
bioRxiv - Bioengineering 2024Quote: ... Each transducer had an acoustic coupling cone attached to the transducer face with an acoustically transparent membrane (Tegaderm, 3M Company, Maplewood, MN, USA) placed over its opening ...
-
bioRxiv - Biochemistry 2024Quote: ... and a custom-made quartz microscope slide using two-sided tape (3M). DNA curtains were prepared with 40 μL of liposome stock solution (97.7% DOPC (Avanti #850375P) ...
-
bioRxiv - Biophysics 2024Quote: ... using double-sided tape (3M 950), to accurately measure vibrations across a wide range of frequencies with minimal distortion ...
-
bioRxiv - Bioengineering 2024Quote: ... Cores were glued to the end of a specimen tube plunger using Scotch super glue (3M #AD119) and loaded onto a Compresstome® (Precisionary ...
-
bioRxiv - Bioengineering 2024Quote: ... A standard glass-bodied reference electrode with a porous junction (Ag/AgCl with 3M KCl) and a Pt wire were employed as the reference and counter electrodes ...
-
bioRxiv - Bioengineering 2024Quote: ... it was coated with a 10 µL droplet of 0.5% Nafion solution and left to dry overnight.77 A standard glass-bodied reference electrode with a porous junction (Ag/AgCl with 3M KCl) and a Pt wire were utilized as the reference and counter electrode ...
-
bioRxiv - Bioengineering 2024Quote: Conductive copper tape (1181/9.5, 3M)
-
bioRxiv - Bioengineering 2024Quote: ... 4.5 mL of 1.5 wt% (w/w) solution of PEG-PFPE2-based surfactant (RAN Biotechnologies, #008-FluoroSurfactant) in fluorinated HFE 7500 oil (3M) was loaded into a 5 mL syringe and injected at 3000 μL/hr ...
-
bioRxiv - Cell Biology 2024Quote: ... A StageTip was constructed by placing two plugs with a narrow bore syringe of a C18 disk (3M Empore Solid Phase Extraction Disk ...
-
bioRxiv - Cancer Biology 2024Quote: ... and transferred to a 200 μL pipet tip with Empore™ C18 disk (3M, 2215) plug ...