Labshake search
Citations for Electron Microscopy Sciences :
351 - 400 of 7233 citations since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Immunology 2024Quote: ... Cells were fixed by adding a warm double strength fixative solution (5% glutaraldehyde (GA, Electron Microscopy Sciences, #16310) and 4% paraformaldehyde (PFA ...
-
bioRxiv - Immunology 2024Quote: ... cells were dehydrated in an ethanol series (30, 50, 75, 95% and 100%, Electron Microscopy Sciences, #15056) at 4°C followed by three additional changes of absolute ethanol ...
-
bioRxiv - Immunology 2024Quote: ... Samples were washed in acetone (Electron Microscopy Sciences, #15056) and finally embedded in a mixture of resin/acetone first and then in pure Epon 812 resin (Electron Microscopy Sciences ...
-
bioRxiv - Cell Biology 2024Quote: ... and either imaged directly or fixed using 4% [w/v] paraformaldehyde (PFA) (EMS 15710) diluted in phosphate buffered saline (PBS ...
-
bioRxiv - Cell Biology 2024Quote: Enucleated murine eyes were fixed in 4% paraformaldehyde (PFA; 16% solution stored under argon from Electron Microscopy Sciences Catalog # 15710) diluted in 1X PBS (Fisher Scientific #50-980-487 and Corning 46-013-CM ...
-
bioRxiv - Cell Biology 2024Quote: ... Larval fat bodies (FBs) or guts were dissected in PBS using Dumont #5 forceps (Electron Microscopy Sciences). All tissues were fixed in 4% paraformaldehyde for 20 min at room temperature and rinsed briefly in PBS prior to staining ...
-
Design and Evaluation of Nanoscale Materials with Programmed Responsivity towards Epigenetic EnzymesbioRxiv - Bioengineering 2024Quote: A drop of nanoparticle sample obtained from the self-assembly of PEG-block-poly (acetylated L-lysine) co-polypeptide was placed on a 300-mesh Formvar carbon-coated copper TEM grid (Electron Microscopy Sciences) for 1 min and wicked off ...
-
bioRxiv - Bioengineering 2024Quote: ... Pellets were cultured for 14 days before being fixed with 4% paraformaldehyde (PFA; Electron Microscopy Sciences, Hatfield, PA) overnight at 4 °C ...
-
bioRxiv - Animal Behavior and Cognition 2024Quote: ... or with Fluoromount medium (Electron Microscopy Sciences).
-
bioRxiv - Animal Behavior and Cognition 2024Quote: ... Samples were fixed for 20 min at 4°C in 4% paraformaldehyde solution (Electron Microscopy Sciences) diluted in PBS ...
-
bioRxiv - Biochemistry 2024Quote: Maxtaform copper/rhodium 400 mesh electron microscope grids (Electron Microscopy Sciences) were coated with collodion film and a thin layer of carbon deposited by evaporation of carbon in an EM ACE200 sputter coater (Leica) ...
-
bioRxiv - Cancer Biology 2024Quote: ... and pellets were resuspended in a 5 ml volume of fixative master mix of Paraformaldehyde-Glutaraldehyde Solution Karnovsky’s Fixative (Electron Microscopy Sciences). Fixative solution was prepared with 16% paraformaldehyde solution ...
-
bioRxiv - Biochemistry 2024Quote: Purified receptor was diluted to ∼5 ug mL−1 and applied to freshly glow-discharged EM carbon coated copper grid (Electron Microscopy Sciences, CF400-Cu,) for 30 sec ...
-
bioRxiv - Biochemistry 2024Quote: ... and 1% uranyl acetate solution (Electron Microscopy Sciences Ltd) were used for negative staining in transmission electron microscopy (TEM) ...
-
bioRxiv - Biochemistry 2024Quote: ... Formvar/Carbon film 300 mesh Nickel Grids (Electron Microscopy Sciences FCF300-Ni-25) were ionized using a Pelco easiGlow Discharge System at 0.3 mbar and 15 mAmps for 2 minutes ...
-
bioRxiv - Biochemistry 2024Quote: To generate negative-stain grids 4 µl of the GraFix fraction was applied to a Copper 400 Mesh grids with continuous carbon (Electron Microscopy Sciences) after glow discharge ...
-
bioRxiv - Biochemistry 2024Quote: A QuantiFoil Cu300 R1.2/1.3 grid (Electron Microscopy Sciences, PA) was glow discharged at 15 mA for 15 s with 10 s hold time using a PELCO easiGlow™ Glow Discharge Cleaning System ...
-
bioRxiv - Biophysics 2024Quote: ... After fixation with 4 % Paraformaldehyde and 0.2 % Glutaraldehyde (Electron Microscopy Sciences) diluted in cytoskeleton buffer (274 mM NaCl ...
-
bioRxiv - Biochemistry 2024Quote: Carbon-coated copper grids (Electron Microscopy Sciences, #CF400-Cu) were glow discharged at 30 mA for 30 s ...
-
bioRxiv - Biochemistry 2024Quote: ... cells were fixed with 4 % methanol-free formaldehyde (Electron Microscopy Sciences, Cat# 15713) for 10 min ...
-
bioRxiv - Biochemistry 2024Quote: Gold grids (200-mesh coated with Formvar-carbon film, EMS) were made hydrophilic by glow discharge at 50 mA for 30 s or 5 mA for 60 s ...
-
bioRxiv - Biophysics 2024Quote: 3 µL diluted MgtA (0.01 mg/mL) was deposited on a carbon-coated 400 mesh copper grid (CF400-CU, EMS, Hatfield, PA, USA) following glow discharging (PELCO easiGlow Glow Discharge Cleaning System ...
-
bioRxiv - Biophysics 2024Quote: ... Quantifoil R1.2/1.3 400 mesh copper grids (EMS) were glow discharged in a PELCO easiGlow Glow Discharge Cleaning System (Ted Pella ...
-
bioRxiv - Biophysics 2024Quote: ... cells were imaged under physiological conditions (5% CO2 and 37°C) via a stage top incubator (Tokai Hit) with type 37 immersion oil (Electron Microscopy Sciences, #16914-01). Fixed cells were imaged at room temperature (22°C ...
-
bioRxiv - Biophysics 2024Quote: ... 2.5 µl of sample was applied to 300 mesh Quantifoil R 2/1 copper grids (Electron Microscopy Sciences, Hatfield PA) that had been previously glow discharged (15 mA ...
-
bioRxiv - Cancer Biology 2024Quote: ... a 10:1 ratio of Sylgard 184 elastomer base and curing agent (Electron Microscopy Sciences) were mixed and poured into a custom-fabricated SU-8 master ...
-
bioRxiv - Cell Biology 2024Quote: ... 1.5 round glass coverslips (Electron Microscopy Sciences) and fixed in 4 % w/v paraformaldehyde (Electron Microscopy Sciences ...
-
bioRxiv - Cell Biology 2024Quote: ... and fixed in 4 % w/v paraformaldehyde (Electron Microscopy Sciences) in PBS for 15 min at RT ...
-
bioRxiv - Cell Biology 2024Quote: ... 4% PFA (EMS), and 0.2% glutaraldehyde (EMS) ...
-
bioRxiv - Cell Biology 2024Quote: ... Dehydrated samples were infiltrated with epoxy resin Embed 812 (Electron Microscopy Sciences), placed in silicone molds ...
-
bioRxiv - Cell Biology 2024Quote: ... and 0.2% glutaraldehyde (EMS), pH 7.4 ...
-
bioRxiv - Biophysics 2024Quote: ... and then fixed with 4% paraformaldehyde (Electron Microscopy Sciences, #15710) in DPBS for 10 minutes at room temperature ...
-
bioRxiv - Bioengineering 2024Quote: ... cells were fixed in 4% paraformaldehyde (16% PFA, 15710, Electron Microscopy Sciences) in 1x DPBS for 20 min and washed with DPBS four times at 5 min each ...
-
bioRxiv - Bioengineering 2024Quote: ... Conductive coating (Graphite Conductive Adhesive, Electron Microscopy Sciences, USA) was applied at the surface between current collector and carbon felt in order to enhance the electric connection between both materials.28 A cation exchange membrane (CEM ...
-
bioRxiv - Bioengineering 2024Quote: ... glow-discharged with 25 mA for 2 min using an EMS 100X (Electron Microscopy Sciences) glow-discharged unit prior to sample application ...
-
bioRxiv - Bioengineering 2024Quote: ... K2 hydrogel samples were transferred to Porous Spec Pots (Electron Microscopy Sciences, Hatfield, PA) and subjected to a series of ethanol in Milli-Q water dilutions (30% ...
-
bioRxiv - Bioengineering 2024Quote: Two 20 µL droplets of water for injection (WFI) and two 20 µL droplets of negative stain (UranyLess EM stain, Electron Microscopy Sciences) were placed onto parafilm ...
-
bioRxiv - Bioengineering 2024Quote: ... ultrathin copper grids coated with 400 mesh carbon film (FCF400-Cu-UB, Electron Microscopy Science, USA) were used with glow discharge treatment for 1 min before use ...
-
bioRxiv - Bioengineering 2024Quote: ... 3 wt% K2 in Milli-Q water was diluted in Milli-Q water to a final concentration of 0.1 wt% and added to glow discharged Quantifoil CUR 1.2/1.3 400 mesh grids (Electron Microscopy Sciences, Hatfield, PA). Samples were then frozen using a Vitrobot Mark IV Plunge System (Thermo Fisher Scientific ...
-
bioRxiv - Cell Biology 2024Quote: ... or 30 min and fixed by adding an equal volume of 4 % pre-warmed paraformaldehyde (Electron Microscopy Sciences, final concentration 2 %), followed by 20 min incubation at 37 °C ...
-
bioRxiv - Animal Behavior and Cognition 2024Quote: ... slices were again washed in PBS before mounting on charged slides and cover-slipped using fluoromount (Electron Microscopy Sciences, Hatfield, PA, USA).
-
bioRxiv - Bioengineering 2024Quote: 10 μL of samples with an optimized concentration (1.0∼1.5 x 1010 /100 μL range) in double-filtered PBS solution were deposited onto the TEM grid (Formvar/Carbon 300 Mesh, Copper; #FCF300-CU, Electron Microscopy Sciences) and incubated for 10 min ...
-
bioRxiv - Biochemistry 2024Quote: ... and the cell nuclei were counter stained with 15% Ehrlich’s hematoxylin (Electron Microscopy Sciences). IHC staining of HS were performed similarly except biotinylated rabbit anti-human secondary antibody was used ...
-
bioRxiv - Bioengineering 2024Quote: ... sterile ringer’s solution (Electron Microscopy Sciences) was injected for 72 hours post-surgery to treat dehydration.
-
bioRxiv - Biochemistry 2024Quote: ... mildly crosslinked in 0.2% glutaraldehyde (Electron Microscopy Sciences) for 40 minutes on ice and quenched by addition of 40 µl of 1M Tris pH 7.4 ...
-
bioRxiv - Bioengineering 2024Quote: ... Cells were fixed with 4% paraformaldehyde (PFA) (Electron Microscopy Sciences, #15710) for 10 minutes at room temperature ...
-
bioRxiv - Biochemistry 2024Quote: ... Cells were then fixed with 4% paraformaldehyde (Electron Microscopy Science) in PBS for 10 min ...
-
bioRxiv - Biochemistry 2024Quote: ... PKA-treated Ycf1 sample was applied to a QF-1.2/1.3-4Au 400 mesh grid (E1435Q Ycf1) purchased from Electron Microscopy Sciences. Grids were placed inside of a Leica EM GP2 equilibrated to 10 °C and 80% humidity ...
-
bioRxiv - Biochemistry 2024Quote: MscS2Δ2-29 was stained with 1.5% uranyl-acetate (EMS), as follows ...
-
bioRxiv - Biochemistry 2024Quote: ... 5 μL of sample was applied to a glow discharged QF-R2/1 Cu 200M grid (Electron Microscopy Sciences). Grids were frozen into -185 °C liquid ethane using a Leica EM GP2 automatic plunge freezer equilibrated to 80% humidity and 10 °C with a 10 second sample incubation time and a 2.5 second blot time on Whatman 1 paper ...