Labshake search
Citations for Eppendorf :
401 - 450 of 497 citations for 2 Trimethylsilyl Furo 3 2 B Pyridine 6 Carbaldehyde since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Microbiology 2021Quote: ... The amplified PCR product was detected by monitoring the increase in fluorescence signal generated from the 6-carboxyfluorescein-labeled probe using a Realplex2 Mastercycler (Eppendorf). Data were analyzed using realplex software (Eppendorf ...
-
bioRxiv - Neuroscience 2023Quote: ... The tubes were centrifuged at 3000 x g for 6 min at 4 °C and the conditioned media was transferred to a Protein LoBind tube (Eppendorf) (media fraction) ...
-
bioRxiv - Physiology 2024Quote: ... were prospectively recruited at gestational ages between 20+0 and 26+6 weeks (+days) from four European tertiary referral centres (University College Hospital London, University Medical Centre Hamburg-Eppendorf, Maternal-Fetal Unit Hospital Clinic Barcelona ...
-
bioRxiv - Bioengineering 2024Quote: ... XC83.1) and centrifuged the samples for 6 min at 17,000 g in a benchtop centrifuge (5427 R, Eppendorf, Hamburg, Germany). We discarded the supernatant and stored the biomass pellets at -80°C until further analysis (as marked in Fig ...
-
bioRxiv - Biochemistry 2024Quote: ... The coverslip was subjected to centrifugation in the 6-well plate at 500 x g for 15 min using a plate centrifuge (Eppendorf). Following this ...
-
bioRxiv - Microbiology 2021Quote: ... and centrifuged for 3 min at 13806 rpm (Centrifuge 5424, FA-45-24-11, Eppendorf) before use ...
-
bioRxiv - Bioengineering 2022Quote: ... the purification was carried out in 3 steps using a standard centrifuge (Eppendorf centrifuge 5425). We washed the sample using ethanol and 2 washing buffers provided by the kit ...
-
bioRxiv - Genomics 2022Quote: ... Beads and proteins were incubated for 3 hours at 4°C (Eppendorf ThermoMixer, 1,300 rpm). Beads were then washed four times with lysis buffer and recovered in 40 µl of laemmli buffer (50 mM Tris-Cl pH 6.8 ...
-
bioRxiv - Neuroscience 2022Quote: ... was added per well using electronic 12-channel pipettes in speed 3 (e12c-pip; Eppendorf). The plates were temporality incubated at 37°C ...
-
bioRxiv - Systems Biology 2022Quote: ... 3) collected filtrate was evaporated dry over-night in a concentrator (Eppendorf® concentrator plus) under vacuum conditions ...
-
bioRxiv - Systems Biology 2022Quote: ... After denaturation at 78 °C for 3 min on a flatblock thermocycler (Eppendorf, Mastercycler Nexus), samples were incubated at 45 °C for 36–48 hr in a benchtop incubator ...
-
bioRxiv - Microbiology 2024Quote: ... The 3mL of homogenized tissue were divided into 3 clean 1.5 mL microcentrifuge tubes (Eppendorf) each with 1 mL of tissue lysate ...
-
bioRxiv - Systems Biology 2024Quote: ... bacterial cultures were centrifuged at 2451 rcf for 3 mins (Centrifuge 5810, Eppendorf, Hamburg, Germany), and the supernatant was taken out and filtered into fresh 50mL tubes using 0.2µm syringe filter (83.1826.001 ...
-
A DNA-based optical nanosensor for in vivo imaging of acetylcholine in the peripheral nervous systembioRxiv - Bioengineering 2020Quote: The DNA scaffold was self-assembled by incubating 5 DNA oligonucleotides following a temperature gradient from 95 °C to 4 °C for 6 h in a thermocycler (Mastercycler® nexus X2, Eppendorf) in Tris-EDTA buffer (TE buffer ...
-
bioRxiv - Pharmacology and Toxicology 2020Quote: ... Plates were sealed with Parafilm and incubated for 6 days at 25°C while shaking at 200 rpm (New Brunswick I26/I26R shaker, Eppendorf). On day 6 the plates were observed under a dissection microscope and embryonic lethality ...
-
bioRxiv - Microbiology 2023Quote: ... culture samples (10 ml) were centrifuged at 5000 rpm in a F-34-6-38 rotor in a 5804R centrifuge (Eppendorf AG) for 10 min at room temperature ...
-
bioRxiv - Microbiology 2024Quote: ... Sampling was performed at intervals of 6 to 14 hours and the OD600 was measured in 10 mm cuvettes using a BioSpectrometer (Eppendorf AG). Supernatants were centrifuged at 12,000 rpm (Thermo Scientific™ Fresco™ 21 Microcentrifuge ...
-
bioRxiv - Genetics 2023Quote: ... Plates were sealed with Parafilm and incubated for 6 days at 20°C while shaking at 200 rpm (New Brunswick I26/I26R shaker, Eppendorf). On day six the plates were observed under a dissection microscope and the survival and reproduction phenotypes were assessed in each condition ...
-
bioRxiv - Molecular Biology 2024Quote: ... Cells were harvested by centrifugation at 5478 g (7000 rpm with Eppendorf F-35-6-30 Rotor for 5430/5430R rotor) for 5 min ...
-
bioRxiv - Neuroscience 2020Quote: ... Microinjection of 300 nl was made over 3 min using a Femtojet injector (~5 psi, Eppendorf), and the exposed cortical surface was covered by a sterilized round cover glass (3 or 4 mm in diameter ...
-
bioRxiv - Biochemistry 2022Quote: ... 3 ml was aliquoted to each of the duplicate 5.0 mL tubes (Eppendorf Tubes®, Germany) while 50 μL was aliquoted to each of the duplicate 200 μL Polymerase Chain Reaction (PCR ...
-
bioRxiv - Plant Biology 2022Quote: ... Fermentation was conducted in approximately 3 L of culture in a bioreactor BioFlo120 (Eppendorf, Hamburg, Germany) at 30°C for 5 days ...
-
bioRxiv - Genetics 2022Quote: ... and spun at 100x g for 3 min in a swing-bucket centrifuge (e.g., Eppendorf 5804R). The cycling conditions are 95°C for 3 min ...
-
bioRxiv - Microbiology 2023Quote: ... the fermentation broth was centrifuged at 9000 r/min for 3 min (Eppendorf Centrifuge 5424, Germany), and the resultant pellet was collected for bacterial DNA extraction using the FastDNA® Spin Kit for Soil (MP Biomedicals ...
-
bioRxiv - Microbiology 2024Quote: ... and 22 h post-induction by centrifugation at 8,000 rpm for 3 min (Eppendorf 5417C centrifuge) and in 3 mL volumes 4 h post-induction by centrifugation at 7,197 x g for 5 min (Sorvall X4RF PRO-MD centrifuge) ...
-
bioRxiv - Bioengineering 2024Quote: ... Stained 3T3 suspension is washed with co-culture media 3 times using a centrifuge (5702, Eppendorf). 3T3 suspension is then added to the keratinocyte dish with a density of 1000 cells/mm^2 ...
-
bioRxiv - Developmental Biology 2021Quote: ... 5.5 × 106 cells were suspended in 5.5 ml mTeSR1 per well of 6-well ultra-low attachment plates (Coring Costar) and cultured overnight in an orbital shaking CO2 incubator (Eppendorf New Brunswick) at 95 rpm ...
-
bioRxiv - Biochemistry 2021Quote: ... cell cultures were collected by centrifugation at 3,300 rpm for 3 min at 4°C (using Eppendorf centrifuge 5810R equipped with the A-4-62 rotor ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The grown cultures were pelleted using a centrifuge (Eppendorf, 5804 R; 5000 RPM, 22°C, 3 min), washed and re-suspended in 0.8% sterile NaCl solution ...
-
bioRxiv - Cell Biology 2023Quote: ... the expelled homogenate was palleted by centrifugation for 3 min (at 300 g at 4°C) (Eppendorf). The pellet was discarded ...
-
bioRxiv - Microbiology 2022Quote: ... The tip of the remaining 3 swabs were broken off into a 1.5 ml tube (BioPur, Eppendorf) containing 0.3 ml sterile PBS to isolate microbiota.
-
bioRxiv - Molecular Biology 2024Quote: ... and the resulting mixture was shaken for 3 h at 65 °C (Eppendorf ThermoMixer C, 1000 rpm). The reaction was quenched by addition of 0.05 M NaHCO3 in water (ca ...
-
bioRxiv - Genomics 2024Quote: ... This was modified to 3 minutes at 37°C with light shaking on a Thermomixer instrument (Eppendorf) at 450rpm ...
-
bioRxiv - Microbiology 2020Quote: ... 20 mL of the enrichment was transferred to 5 L NMS medium in a 6-L fermenter controlled with a BioFlo® 120 Bioprocess Control Station (Eppendorf, Hamburg, Germany). Gas stream carrying a relatively low CH4 concentration (0.5% v/v in air ...
-
bioRxiv - Systems Biology 2023Quote: ... samples were pelleted at 6,010 x g for 3 minutes using a bench top centrifuge (Eppendorf 5424/5424R). 100% DMSO was added to resuspend the cell pellet with gentle pipetting until the pellet was completely broken down ...
-
bioRxiv - Molecular Biology 2023Quote: ... Yeast were centrifuged at 3,000 rpm for 3 min in an A-4-62 swing bucket rotor (Eppendorf) and resuspended in 20 ml 1 M sorbitol and incubated at 4 °C overnight (<18 h) ...
-
bioRxiv - Molecular Biology 2023Quote: 10xGenomic single cell 3′ library was prepared as follows: single cells were sorted into 1.5 mL tubes (Eppendorf) and counted under the microscope ...
-
bioRxiv - Plant Biology 2024Quote: ... The supernatant was then removed and nuclei were gently resuspended in 1.5 ml of HONDA buffer and split into 3 x 1.5 ml DNA LoBind tubes (Eppendorf). Samples were centrifugated at 2,000 g for 10 minutes to pellet nuclei and the supernatant was removed ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Samples were then extracted for 3 hr at 4°C in a ThermoMixer (Eppendorf US, Enfield, CT, USA), followed by evaporation of the methanol component with a speedvac concentrator (Thermo Fisher Scientific ...
-
bioRxiv - Microbiology 2021Quote: ... with 100 μl aliquot of the ultra-low gelling temperature agarose gel solution (6% in Mueller Hinton Broth II, cation-adjusted) to 85 °C in a Thermomixer (Eppendorf Thermomixer R Shaker, Eppendorf). Once the temperature was reached ...
-
bioRxiv - Cell Biology 2020Quote: ... This isolation method included a penultimate centrifugation step in Eppendorf polypropylene conical tubes (10,000 x g for 30 min at 4°C, in Eppendorf rotor F-34-6-38) that allowed the removal/isolation of larger microvesicles ...
-
bioRxiv - Synthetic Biology 2020Quote: ... These reactions were incubated for 3 h at 30°C with 500 rpm shaking (Thermo Mixer C, Eppendorf, Germany). Post-incubation ...
-
bioRxiv - Cancer Biology 2021Quote: ... Proteins were eluted in 40 μL of 0.2 M glycine pH 3 for 30 min on a ThermoMixer (Eppendorf) at 900 rpm at room temperature ...
-
bioRxiv - Cell Biology 2020Quote: ... spun at 13,000 rpm for 3 min and the supernatant transferred to clean 1.5 ml tubes (Eppendorf, Hamburg, Germany). An equal volume of isopropanol (Sigma Aldrich ...
-
bioRxiv - Plant Biology 2023Quote: ... Bound phosphopeptides were then eluted 3 times with 100 µL ammonium hydroxide (5% v/v) into 1.5mL Lo-Bind tubes (Eppendorf). These were then frozen and lyophilized ...
-
bioRxiv - Molecular Biology 2023Quote: ... The mixture was sonicated 3 times for 1 minute in a waterbath sonicator and incubated in a ThermoMixer (Eppendorf) for 30 minutes at 37°C and 500 rpm ...
-
bioRxiv - Molecular Biology 2023Quote: Additional primary chondrifying cell cultures were inoculated onto the surface of 30-mm round cover slips (3×30-μL droplets) (Menzel-Gläser, Menzel GmbH, Braunschweig, Germany) placed in 35-mm Petri dishes (Eppendorf). Hyaline cartilage-specific ECM production in cultures from days 0 to 15 was qualitatively analysed using metachromatic staining ...
-
bioRxiv - Molecular Biology 2023Quote: ... 30- μL droplets of the cell suspension were inoculated onto the surface of 30-mm round cover slips (3 × 30-μL droplets) (Menzel-Gläser) placed in 35-mm Petri dishes (Eppendorf). As described above ...
-
bioRxiv - Synthetic Biology 2024Quote: ... with TaqMan® Gene Expression Assay and run using the QuantStudio™ 3 Real-Time PCR System (Eppendorf, A28137) at standard curve mode ...
-
bioRxiv - Plant Biology 2024Quote: ... was added to each tube and incubated at 50 °C at 850 rpm for 3 hours using a Thermomixer F2.0 (Eppendorf). A total of 150 µL of each sample was then transferred to vials in preparation for injection in the GC-MS ...