Labshake search
Citations for Eppendorf :
301 - 350 of 490 citations for Potassium 3 4 difluorophenyl trifluoroborate since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2021Quote: ... Samples were put on ice for 30 min and precipitates were spun down for 5 min at 20,000 g at 4°C in a tabletop centrifuge (Eppendorf). After one wash with ice-cold acetone ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The sample was subsequently centrifuged for 1 h at 11,000 x g at 4°C in an Eppendorf tabletop centrifuge 5810R (Eppendorf). The phage pellet was resuspended in 400 μl DNAseI buffer (10 mM Tris-HCl ...
-
bioRxiv - Bioengineering 2023Quote: All centrifugation experiments were conducted in an Eppendorf 5702R centrifuge with a swing bucket rotor (Eppendorf, A-4-38) at 20°C ...
-
bioRxiv - Microbiology 2023Quote: ... harvested by centrifugation (3,500 × g for 20 min at 4°C, Centrifuge 5702 R, Eppendorf North America, Framingham, MA), and suspended in an equivalent amount of 1 × PBS ...
-
bioRxiv - Microbiology 2023Quote: ... OD660 of 0.3-0.5 mid-log) were harvested by centrifugation (5,000 x g, 5 min at 4°C) (Eppendorf centrifuge 5430R). The supernatant was immediately discarded ...
-
bioRxiv - Microbiology 2023Quote: ... The precipitated gDNA was pelleted by centrifugation (21,000 x g, 10 min at 4°C) in a tabletop centrifuge (Model 5424, Eppendorf). The supernatant was discarded by decantation ...
-
bioRxiv - Neuroscience 2022Quote: ... Lysates were centrifuged at 4°C at 15,000 RPM for 15 minutes in a table top centrifuge (Eppendorf 5424R). The supernatant’s protein concentration was measured using Bradford’s assay (Bio-Rad #5000202) ...
-
bioRxiv - Microbiology 2024Quote: ... the homogenate was centrifuged at 2500 rpm for 10 minutes at 4°C using a benchtop centrifuge (Eppendorf, USA), and the supernatant was collected.
-
bioRxiv - Biochemistry 2023Quote: ... Cells were washed in 20 mL of chilled phosphate-buffered saline (1X PBS, pH 7.4), and centrifuged (1500 ×g, 4 °C, 15 min) using the Centrifuge 5810R (Eppendorf). The cell pellet was subsequently resuspended in 30 mL of ice-cold RSB hypo buffer (10 mM NaCl ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Samples were centrifuged at 10,000 rpm at 4°C for 10 min and supernatants were dried under vacuum centrifugation (Eppendorf) overnight ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were then centrifuged at 13,000×g for 20 min at 4 °C using an F2402 rotor in a GS15R table-top centrifuge (Eppendorf). Pellets were air dried ...
-
bioRxiv - Cell Biology 2022Quote: ... protease and phosphatase inhibitors and PMSF (10 minutes on ice) and centrifuged at 13,300 rpm for 5 min at 4OC (Centrifuge 5810 R; rotor A-4-81; Eppendorf). The supernatant (whole cell lysates ...
-
bioRxiv - Cell Biology 2022Quote: ... 4 mM MgCl2) was carefully injected into an individual cardiomoycyte by a glass pipette via the CellTram injector (Eppendorf). After 5 minutes dye spreading to neighboring cardiomyocytes was visualized by Zeiss Axio Examiner A1 using a 40× objective and images were taken using TILL Photonics LA software (version 2.3.0.18 ...
-
bioRxiv - Plant Biology 2023Quote: ... samples (stored for 4-12 weeks) were thawed at room temperature for 15 mins and centrifuged (Eppendorf Centrifuge 5417C) at 11,000 rpm for 14 mins to extract bulk leaf sap ...
-
bioRxiv - Neuroscience 2023Quote: ... and tubes centrifuged at 4 °C for 2 min at 12000 x g in a refrigerated microfuge (Eppendorf 5415R). The upper phase was discarded ...
-
bioRxiv - Physiology 2024Quote: ... The next day we centrifuged tubes with methanol and tissue (4°C, 2000rpm) for fifteen minutes (Eppendorf centrifuge 5810R). We carefully pipetted the supernatant (∼ 5mL ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were collected by centrifugation at 4,000 rpm for 10 minutes at 4°C using S-4x universal rotor (Eppendorf). Cell pellets from the 200 mL culture were dissolved in cell suspension buffer (20 mM HEPES:KOH pH 7.5 ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from a 25-mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) and resuspended in 0.5 mL of 3 M NaOAc pH4.5 supplemented with 10 mM EDTA ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from 50 mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) ...
-
bioRxiv - Microbiology 2024Quote: ... followed by centrifugation at 21,130 x g at 4°C for 10 min in a tabletop chilled centrifuge (Eppendorf). 250 μl of the clarified lysate was transferred to a pre-chilled tube and mixed with 750 μl of TRIZOL LS (Sigma ...
-
bioRxiv - Microbiology 2024Quote: ... The resulting parasite solution was pelleted at 1,000 x g at 4°C for 8 min using a chilled large tabletop centrifuge (Eppendorf). The pellet obtained from two D150 plates underwent three washes with intracellular buffer before being resuspended in 200 μl of ice-cold polysome lysis buffer (20 mM Tris pH 8.0 ...
-
bioRxiv - Microbiology 2024Quote: ... The parasite solution was pelleted at 1,200 x g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Microbiology 2024Quote: ... Debris was removed from sonicated lysates by centrifugation for 60 minutes at 4 °C and 14,000 × g in a 5910 R centrifuge (Eppendorf). The soluble lysate was then decanted and protein was purified using immobilized metal affinity chromatography ...
-
bioRxiv - Neuroscience 2024Quote: ... Blood was collected into SAFE-T-FILL capillary collection tubes (RAM Scientific) on ice and then centrifuged at 4°C for 10 min at 14,000 rpm (Centrifuge 5804R, Eppendorf). Plasma was aliquoted into Eppendorf tubes and stored at -80°C ...
-
bioRxiv - Neuroscience 2024Quote: Transgenic male and female flies were maintained under a dark condition for 4-6 days after eclosion and then transferred to a plastic tube (1.5 mL, Eppendorf) containing ∼200 µL of fly food ...
-
bioRxiv - Physiology 2024Quote: ... plasma samples were thawed from storage at -80°C and centrifuged (5,000 x g, 10 minutes, 4 °C; Eppendorf 5427R with rotor FA-45-48-11 ...
-
bioRxiv - Pathology 2024Quote: ... the bacterial suspension was subjected to centrifugation at 4000 rpm at 4 °C for 15 min (5804R, Eppendorf, Germany). The resulting pellet was rinsed with sterile distilled H2O and then reconstituted in an equivalent volume of sterile distilled H2O ...
-
bioRxiv - Biochemistry 2024Quote: ... the cells were pelleted by centrifugation at 4,500xg for 10 min at 4 °C (High-Speed Centrifuge CR22N, Eppendorf). The supernatant was collected and doubly filtered (with a glass filter then with a PVDF filter) ...
-
bioRxiv - Biochemistry 2024Quote: ... 200 µL of K562 cell lysates (2.5 mg/mL) was added to the beads and incubated at 4 °C on thermomixer (5382000023, Eppendorf) at 1,000 rpm for 2 hours ...
-
bioRxiv - Zoology 2024Quote: ... kept overnight at -20°C then centrifuged at 12000 rpm for 15 mins at 4°C (Eppendorf 5810R, USA). The precipitate was allowed to be air-dried and dissolved in 1 ml of 1M Tris-HCl buffer (pH 6.8) ...
-
bioRxiv - Biophysics 2024Quote: ... the protein was concentrated to 250μl using a 100kDa molecular weight cut-off filter (Amicon), centrifuged to pellet aggregates (10,000g, 10min, 4°C) (5418R, Eppendorf) and injected in a Superdex 200 10/300 gel filtration column (Cytiva ...
-
bioRxiv - Biochemistry 2024Quote: ... heat- denatured FCS matrix was a supernatant obtained after spinning (15,000 g, 15 minutes, 4 °C) 100% FCS (200 uL; 1.7 mL Eppendorf tubes) heated at 85°C for 15 minutes in a Thermomixer Comfort heating block (Eppendorf ...
-
bioRxiv - Genetics 2024Quote: ... equipped with a micromanipulator (MMO-220A and MN-4; Narishige, Tokyo, Japan) coupled to a FemtoJet express system (Eppendorf) with the following settings ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were maintained in a humidified atmosphere of 5% CO2 and 37 °C and were passaged every 2-3 days into 10 cm polystyrene coated plates (Eppendorf; EP0030700112-300EA) upon reaching high density ...
-
bioRxiv - Biochemistry 2022Quote: ... and samples were vortexed at 1200 rpm for 2-3 hours at room temperature (MixMate ®, Eppendorf South Pacific, Sydney, NSW Australia). Following this ...
-
bioRxiv - Systems Biology 2022Quote: ... each SCN was cut into 3 pieces with a scalpel on a glass slide and transferred to a protein LoBind tube (Eppendorf, Hamburg, Germany) prefilled with 250 µL lysis buffer (100 mM Tris-HCl ...
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
bioRxiv - Biophysics 2023Quote: ... Cell growth was quantified at intervals by measuring their optical density at regular intervals (as mentioned in Figure 3) using a Biophotometer® D30 (Eppendorf, Germany). The morphology of cells at different growth stages was determined by a variety of microscopic techniques (as described in the below sections).
-
bioRxiv - Microbiology 2022Quote: ... were also added to each tube and incubated at 37°C for 3 h in a thermomixer (Eppendorf Thermomixer C, Hamburg, Germany). After 3 h incubation ...
-
bioRxiv - Biophysics 2023Quote: ... and the device was left running for a minimum of 3 h while droplets were being collected in a 1.5 mL microcentrifuge tube (Eppendorf®, Hauppauge, NY).
-
bioRxiv - Developmental Biology 2023Quote: ... the gRNA:Cas9 ribonucleoprotein complex solution was incubated at 37°C for 5 min and then backfilled into 3 microinjection needles using an Eppendorf GELoader tip (Eppendorf, Cat# 022351656). After loading embryos into the embryo holder which covered with 12.5 ppt of salinity water with 0.0001% of methylene blue ...
-
bioRxiv - Plant Biology 2024Quote: ... The samples were then incubated for 3 h at 37 °C with 600 rpm shaking on a thermomixer with a ThermoTop (Eppendorf, Hamburg, Germany) to reduce condensation into the caps of collection tubes ...
-
bioRxiv - Neuroscience 2024Quote: ... The pellets were resuspended in 100 µl of extraction buffer and incubated at 37 °C for 3 h with shaking at 500 rpm (Eppendorf ThermoMixer C). The samples were then centrifuged at 20,000 g for 20 min ...
-
bioRxiv - Molecular Biology 2024Quote: ... KH2PO4 1.4 and EDTA 3 (pH 7.0)).The sperm head was separated from the tail by applying multiple piezo pulses (PiezoXpert®, Eppendorf, Montesson, France)
-
bioRxiv - Biochemistry 2024Quote: ... the samples from each replicate were aliquoted into 10 wells in a 96-well plate and heated for 3 min in an Eppendorf gradient thermocycler (Eppendorf; Mastercycler X50s) in the temperature range of 48-59°C ...
-
bioRxiv - Cell Biology 2020Quote: ... we centrifuged the crude lysate at 500 g for 5 min at 4°C in a microfuge (Eppendorf, model 5424R) to remove cell debris ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM label was subsequently added and samples were incubated over night at 4°C and 350 rpm in a Thermomixer (Eppendorf). Excess label was removed by using a Sephadex G25 column (GE Healthcare Bio-Science AB ...
-
bioRxiv - Bioengineering 2022Quote: ... The lysates were clarified by centrifugation at 18,500g at 4 °C for 30 minutes using tabletop centrifuge (Eppendorf Centrifuge 5810R). Soluble protein was separated from cell debris and the supernatant was passed through 5 mL HisTrap columns (Cytiva ...
-
bioRxiv - Neuroscience 2021Quote: ... Single EGFP+ cells were sorted on a BD Influx equipped with a 140 µm nozzle and a cooling unit with a sample temperature of 4°C and collected into a DNA LoBind tube (Eppendorf) containing aCSF with 0.5% BSA ...
-
bioRxiv - Cell Biology 2022Quote: ... Absorbance was measured at 600 nm after every 12 h intervals till 4 to 5 days using a UV-visible spectrophotometer (Eppendorf).