Labshake search
Citations for Eppendorf :
251 - 300 of 1320 citations for 2H Pyrazolo 4 3 c pyridine 3 chloro 4 5 6 7 tetrahydro since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2024Quote: ... Blood was collected into SAFE-T-FILL capillary collection tubes (RAM Scientific) on ice and then centrifuged at 4°C for 10 min at 14,000 rpm (Centrifuge 5804R, Eppendorf). Plasma was aliquoted into Eppendorf tubes and stored at -80°C ...
-
bioRxiv - Pathology 2024Quote: ... the bacterial suspension was subjected to centrifugation at 4000 rpm at 4 °C for 15 min (5804R, Eppendorf, Germany). The resulting pellet was rinsed with sterile distilled H2O and then reconstituted in an equivalent volume of sterile distilled H2O ...
-
bioRxiv - Biochemistry 2024Quote: ... the cells were pelleted by centrifugation at 4,500xg for 10 min at 4 °C (High-Speed Centrifuge CR22N, Eppendorf). The supernatant was collected and doubly filtered (with a glass filter then with a PVDF filter) ...
-
bioRxiv - Biochemistry 2024Quote: ... 200 µL of K562 cell lysates (2.5 mg/mL) was added to the beads and incubated at 4 °C on thermomixer (5382000023, Eppendorf) at 1,000 rpm for 2 hours ...
-
bioRxiv - Biophysics 2024Quote: ... the protein was concentrated to 250μl using a 100kDa molecular weight cut-off filter (Amicon), centrifuged to pellet aggregates (10,000g, 10min, 4°C) (5418R, Eppendorf) and injected in a Superdex 200 10/300 gel filtration column (Cytiva ...
-
bioRxiv - Biochemistry 2024Quote: ... heat- denatured FCS matrix was a supernatant obtained after spinning (15,000 g, 15 minutes, 4 °C) 100% FCS (200 uL; 1.7 mL Eppendorf tubes) heated at 85°C for 15 minutes in a Thermomixer Comfort heating block (Eppendorf ...
-
bioRxiv - Microbiology 2021Quote: ... The cells were incubated with the dye and shaken for 20 minutes at room temperature in the dark, then washed by centrifugation (3 min, 8000 RPM, 28 °C (Eppendorf 5430R)) and resuspension in M2G three times ...
-
bioRxiv - Biochemistry 2020Quote: Microdissected tissue samples were lysed in SDT buffer (4% SDS, 0.1M DTT, 0.1M Tris/HCl, pH 7.6) in a thermomixer (Eppendorf ThermoMixer® C, 30 min, 95°C, 750 rpm). After that ...
-
bioRxiv - Bioengineering 2024Quote: ... Cultures were further incubated overnight (900 RPM, 20 °C, 70 % humidity, 20 h) and harvested by centrifugation (Eppendorf 5810R; 3,220 x g, 4 °C, 15 min). The obtained cell pellet was resuspended with 150 µL buffer (50 mM Bicine ...
-
bioRxiv - Plant Biology 2024Quote: ... Plants (3 plants in 2 mL Eppendorf tubes) were harvested at Zeitgeber time (ZT ...
-
bioRxiv - Microbiology 2021Quote: ... Cells were pelleted by centrifugation (3220 x g 5 min, Eppendorf 5810R fitted with rotor A-4-81), pellets were recombined with 5 mL pre-chilled MP medium (no carbon) ...
-
bioRxiv - Developmental Biology 2024Quote: ... for 5 min at 37 °C under agitation (Eppendorf, ThermoMixer C). Lobes were pipetted to promote dissociation ...
-
bioRxiv - Systems Biology 2024Quote: 20 mL of culture from each of 3 experimental replicates (n = 3) was collected in Protein LoBind tubes (Eppendorf, Hamburg, Germany) by centrifugation at 1650 xg for 10 min ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM label was subsequently added and samples were incubated over night at 4°C and 350 rpm in a Thermomixer (Eppendorf). Excess label was removed by using a Sephadex G25 column (GE Healthcare Bio-Science AB ...
-
bioRxiv - Bioengineering 2022Quote: ... The lysates were clarified by centrifugation at 18,500g at 4 °C for 30 minutes using tabletop centrifuge (Eppendorf Centrifuge 5810R). Soluble protein was separated from cell debris and the supernatant was passed through 5 mL HisTrap columns (Cytiva ...
-
bioRxiv - Neuroscience 2021Quote: ... Single EGFP+ cells were sorted on a BD Influx equipped with a 140 µm nozzle and a cooling unit with a sample temperature of 4°C and collected into a DNA LoBind tube (Eppendorf) containing aCSF with 0.5% BSA ...
-
bioRxiv - Genetics 2020Quote: ... The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042, Eppendorf, Inc.) and the resultant supernatant fractions were stored at −80°C ...
-
bioRxiv - Neuroscience 2020Quote: ... 180 μL aliquots of solubilized GlyT1 cell membrane were dispensed in a 4°C-cooled 96-well PCR plate (Eppendorf) in triplicates ...
-
bioRxiv - Microbiology 2021Quote: ... the cells were transferred into the anaerobic chamber and harvested for 12 min at 25°C and 3700 rpm (Centrifuge 5920 R, S-4×1000, Eppendorf) outside of the anaerobic chamber ...
-
bioRxiv - Cell Biology 2021Quote: ... The resuspended cilia sample was centrifuged at 16,000g for 10 min at 4°C in a microfuge (Eppendorf, Centrifuge 5415D). The supernatant was discarded ...
-
bioRxiv - Immunology 2020Quote: ... The cultures were placed on ice for 10 minutes to slow growth then centrifuged at 3,000 × g for 10 minutes at 4°C (Eppendorf 5810R). The supernatants were discarded and the pellets were resuspended in fresh RPMI 10mM glucose until a McFarland of 5.0 (∼109 CFU/mL ...
-
bioRxiv - Systems Biology 2020Quote: ... A fixed volume of 100 μL cells was used to inoculate 50 mL preculture M9 +40 mM MOPS media with 4 g/L glucose which was grown overnight in a shake flask at 200 rpm in a 37°C (Eppendorf) incubator ...
-
bioRxiv - Genomics 2022Quote: ... The beads were then incubated 1 h with the anti-Myc antibody (9E10) at 4°C (Eppendorf ThermoMixer, 1,300 rpm), washed three times in PBS/0.1 % BSA and two times in lysis buffer ...
-
bioRxiv - Microbiology 2023Quote: ... The sample was vortexed for 30 seconds before being centrifuged for 15 mins at 4°C at 1739 x g (3000 rpm, Eppendorf 5810R benchtop centrifuge ...
-
bioRxiv - Molecular Biology 2024Quote: ... 1 mM D-L methionine) for 1 h at 4° C with shaking at 1400 rpm in a benchtop thermomixer 22331(Eppendorf). The beads were washed twice with binding buffer without soybean trypsin inhibitor and suspended in 50 % v/v binding buffer ...
-
bioRxiv - Molecular Biology 2024Quote: ... for 30 min-4 h at 76°C in a heat block (speed of 300 rpm; ThermoMixer F1.5, Eppendorf, Germany) (Wagner et al. ...
-
bioRxiv - Neuroscience 2024Quote: ... samples were layered on top of the 105 µl cushion and spun at 10,000 g for 20 min at 4°C in a swing out rotor (A-8-11 swing bucket rotor, Eppendorf) to isolate CpxII bound to trans SNARE complexes (SNAREpins ...
-
bioRxiv - Evolutionary Biology 2024Quote: 15mL of a Salten solution (1011 PFU/mL) was distributed into 1.5mL polypropylene tubes and centrifuged for 1 hour at 16,000g at 4°C (Eppendorf Centrifuge 5415R). Pellets were resuspended in 100µL of 100 mM of ammonium acetate (NH4-CH3CO2 ...
-
bioRxiv - Developmental Biology 2024Quote: ... and cells were sorted using a BD FACS Aria cell sorter at 4°C and collected in 0.4 mg/mL BSA in DNA LowBind tubes (Eppendorf, 0030108523). Cells were pelleted at 300 g for 5 minutes at 4°C and manually counted using a Bürker Chamber ...
-
bioRxiv - Microbiology 2022Quote: ... The cell suspension was then transferred into 2 mL tubes and centrifuged at 16 000g and 4°C (Eppendorf, Germany) to pellet the cells ...
-
bioRxiv - Neuroscience 2023Quote: ... Homogenates were centrifuged at 16,100 g for 20 min at 4 °C with an Eppendorf 5415R centrifuge (Eppendorf, Hamburg, Germany), sonicated for 10 s and protein amounts normalized following a bicinchoninic acid protein assay (ThermoFisher) ...
-
bioRxiv - Biochemistry 2023Quote: ... The mixture was then incubated at 37 °C for 4 hrs under gentle orbital agitation (300 rpm on Eppendorf Thermomixer) and centrifuged at 15 000 × g for 5 min prior to SEC analysis ...
-
bioRxiv - Animal Behavior and Cognition 2023Quote: ... the samples were 10000xg centrifuged for 10 min in a cooled centrifuge (4°C; Centrifuge 5415 R, Eppendorf, Hamburg, Germany), and the supernatant transferred to new microcentrifuge tubes ...
-
bioRxiv - Molecular Biology 2023Quote: ... After centrifugation for 10 min at 15,000 x g and 4 °C with a 5415R benchtop microcentrifuge (Eppendorf, Hamburg, Germany), the supernatants were collected and residual sample pellets were reextracted with a 200 μL aliquot of the previously used extraction solvent mixture ...
-
bioRxiv - Microbiology 2024Quote: ... was mixed with an equal volume of acidic phenol pH 4.3 and centrifugated (14,000 rpm for 20 minutes at 4°C in 5418 R Centrifuge equipped with FA-45-18-11 rotor (Eppendorf)) ...
-
bioRxiv - Microbiology 2024Quote: ... After centrifugation (14,000 rpm for 20 min at 4°C in 5418 R Centrifuge equipped with FA-45-18-11 rotor (Eppendorf)) ...
-
bioRxiv - Neuroscience 2024Quote: ... The plates were centrifuged at 2,000 × g for 20 minutes at 4°C using a swinging-bucket microplate adaptor (Eppendorf, Germany). After adding 180ul or 450 µl of mitochondrial assay buffer ...
-
bioRxiv - Cell Biology 2024Quote: ... the cell lysate was collected and agitated for 30 min at 800 rpm at 4 °C in a Thermomixer (Eppendorf). Afterwards ...
-
bioRxiv - Cancer Biology 2024Quote: ... extracts were centrifuged for 20 minutes at 18,000 x g (4°C) using a Eppendorf™ Centrifuge 5430 R (Eppendorf), to pellet out cellular debris ...
-
bioRxiv - Plant Biology 2024Quote: ... SDS at a 1:3 (w/v) ratio and extracted by shaking 1000 RPM 95 °C for using a tabletop shaker (Eppendorf ThermoMixer F2.0). Samples were then centrifuged at 20,000 xg for 10 min at room temperature and the supernatant retained in new tubes ...
-
bioRxiv - Plant Biology 2024Quote: ... The samples were then incubated for 3 h at 37 °C with 600 rpm shaking on a thermomixer with a ThermoTop (Eppendorf, Hamburg, Germany) to reduce condensation into the caps of collection tubes ...
-
bioRxiv - Cell Biology 2022Quote: ... protease and phosphatase inhibitors and PMSF (10 minutes on ice) and centrifuged at 13,300 rpm for 5 min at 4OC (Centrifuge 5810 R; rotor A-4-81; Eppendorf). The supernatant (whole cell lysates ...
-
bioRxiv - Immunology 2020Quote: ... (Eppendorf Centrifuge 5810R, rotor A-4-62) at room temperature ...
-
bioRxiv - Cell Biology 2021Quote: ... in a Realplex 4 PCR machine (Eppendorf), and values were normalized to rpl-32 as an internal control ...
-
bioRxiv - Biophysics 2022Quote: ... and a micro-manipulator (Injectman 4; Eppendorf). Injection pipettes were prepared from siliconized (Sigmacote ...
-
bioRxiv - Cell Biology 2023Quote: ... in a realplex 4 qPCR cycler (Eppendorf). To calculate the relative mtDNA levels ...
-
bioRxiv - Molecular Biology 2024Quote: Centrifuge rotor A-4-62 (Eppendorf, 022638009)
-
bioRxiv - Cell Biology 2024Quote: ... and a micro-manipulator (Injectman 4, Eppendorf). Injection needles were prepared from siliconized (Sigmacote ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Injection was performed with InjectMan 4 (Eppendorf) and Eppendorf femtotips using an Olympus IX71 microscope ...
-
bioRxiv - Cell Biology 2024Quote: ... with A-4-81 Rotor (Eppendorf, Germany) to remove the dead cells and cell debris ...