Labshake search
Citations for Eppendorf :
201 - 250 of 1320 citations for 2H Pyrazolo 4 3 c pyridine 3 chloro 4 5 6 7 tetrahydro since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Plant Biology 2024Quote: ... was added to each tube and incubated at 50 °C at 850 rpm for 3 hours using a Thermomixer F2.0 (Eppendorf). A total of 150 µL of each sample was then transferred to vials in preparation for injection in the GC-MS ...
-
bioRxiv - Developmental Biology 2024Quote: ... and 0.003% Tricaine (ethyl-3-aminobenzoate-methanesulfonate) for 60 min at 31 °C in a Thermomixer (Eppendorf, Thermomixer R) set to 100 rpm ...
-
bioRxiv - Biochemistry 2021Quote: ... Unreacted dye was removed by two passages over an equilibrated Bio-spin® 6 column filled with Bio-gel P-6 media in labeling buffer and centrifuged in a tabletop centrifuge (Eppendorf 5810 R, rotor A-4-62) at 1500 rpm for 3 min ...
-
bioRxiv - Genomics 2020Quote: The ST slide with the tissue section was warmed to 37°C for 4 minutes on a thermal incubator (Eppendorf Thermomixer Option C, Germany) and in situ fixed and washed as described above ...
-
bioRxiv - Microbiology 2020Quote: ... The presumptive cultures were grown in TSBYE broth for 24 h at 30°C and centrifuged at 4°C (Eppendorf, 5810R, Auckland, New Zealand) at 3,220 × g for 10 min ...
-
bioRxiv - Biophysics 2020Quote: ... The needle was then glued to a 6×4×2 mm Neodyn magnet (QM-06×04×02-N, Magnets4you) and attached to a motorized micromanipulator (PatchMan, Eppendorf). The magnetic needle was lowered until it touched the bottom of a dummy sample dish and raised again so that it was placed above the bottom of the sample with the very tip in focus around 100 μm above the focus of the glass surface.
-
bioRxiv - Immunology 2021Quote: Xela DS2 (passages 120 – 130) and Xela VS2 (passages 125 – 135) (n = 4 independent trials) were seeded in a 6-well plate (Eppendorf) at a cell density of 625,000 cells/well in 1 mL of Xela complete media and allowed to adhere overnight at 26 °C ...
-
bioRxiv - Neuroscience 2020Quote: ... centrifuged (16000 g, 3 min, 5415R, Eppendorf) and re-suspended in fresh medium ...
-
bioRxiv - Bioengineering 2022Quote: ... tumors were minced using a razor and digested with 1mg/ml collagenase A and collagenase D and 0.4mg/ml DNase I in PBS at 37°C for 2h with rotation at 600rpm in a thermomixer compact (Eppendorf). 10mM EDTA was then added to stop the enzymatic reaction ...
-
bioRxiv - Biophysics 2021Quote: ... The bicelle mixture (~1 mL) was centrifuged (13,400 rpm, Eppendorf F45-12-11 rotor, 4°C, 30 sec) to remove insoluble debris and the supernatant concentrated to ~200 μL using a 0.5 mL 10 kDa MWCO centrifugal filter (Amicon ...
-
bioRxiv - Physiology 2020Quote: Plasma was obtained by centrifugation (4°C, 1820 x g for 30 min; Eppendorf 5810 R, Hamburg, Germany) and stored in aliquots at −20°C until insulin and metabolites (glucose ...
-
bioRxiv - Immunology 2021Quote: ... The obtained lysates were centrifuged for 20 min at 21,000 g and 4°C (Centrifuge 5424 R, Eppendorf) to precipitate insoluble fractions ...
-
bioRxiv - Molecular Biology 2021Quote: ... 55S mitoribosomes then underwent a clearance spin at 14000 rpm and 4°C (tabletop centrifuge 5427 R, Eppendorf). We realized that our mitoribosomes contained endogeneous tRNAs in the A and P sites of the ribosome ...
-
bioRxiv - Cell Biology 2023Quote: ... samples were centrifuged at 20,000× g for 30 min at 4 °C (5804/5804 R Centrifuge, Eppendorf, USA), and supernatants were discarded ...
-
bioRxiv - Cell Biology 2022Quote: ... The mixture was shaken for 1 hour at 4°C and 1400 rpm in a Thermomixer (Eppendorf, Germany). The samples were spun down at 14000 rpm ...
-
bioRxiv - Molecular Biology 2024Quote: ... with shaking at 1,200 RPM and 4° C for 1 h using a temperature-controlled Thermomixer 22331 (Eppendorf). The beads were pelleted at 500 x g for 1 min and the supernatant removed to become the unbound fraction ...
-
bioRxiv - Cancer Biology 2024Quote: ... The cells were centrifuged down at 11,200 g for 30 min at 4°C (Eppendorf Centrifuge 5415 R). The supernatant was collected and transferred to a fresh microfuge tube ...
-
bioRxiv - Biochemistry 2024Quote: ... Cell pellets were collected by centrifugation at 4,000 ×g and 4 °C for 15 min (5804R centrifuge, Eppendorf), washed with 50 mM Tris-HCl buffer ...
-
bioRxiv - Biochemistry 2021Quote: ... In vitro translation reactions were carried out for the indicated proteins using rabbit reticulocyte lysate and SP cells at a final concentration of 3×106 cells/ml at 30°C for 40 min in a thermomixer (Eppendorf) set to 900 rpm ...
-
bioRxiv - Molecular Biology 2023Quote: ... the rehydrated gel pieces were overlaid with 30 μL of 0.01% ProteaseMAX in 50 mM ammonium bicarbonate and incubated at 37°C for 3 hours with shaking at 800 rpm (Thermomixer, Eppendorf). The digestion reaction was transferred to a fresh tube ...
-
bioRxiv - Neuroscience 2023Quote: ... PFF oligomers were incubated with or without SVD-1a in PBS pH 7.4 for 3 d at 37 °C under quiescent condition in low retention Eppendorf tubes (Eppendorf, GE). Prior to injection ...
-
bioRxiv - Biophysics 2024Quote: ... at 90°C for 5 minutes (Thermomixer C, Eppendorf, MA). The samples were loaded onto a 4-20% Mini-PROTEAN precast protein gel (Bio-Rad ...
-
bioRxiv - Plant Biology 2023Quote: ... Bound phosphopeptides were then eluted 3 times with 100 µL ammonium hydroxide (5% v/v) into 1.5mL Lo-Bind tubes (Eppendorf). These were then frozen and lyophilized ...
-
bioRxiv - Neuroscience 2020Quote: ... and rotor (Eppendorf #S-4-72). Upon end of centrifugation ...
-
bioRxiv - Synthetic Biology 2024Quote: ... in a MasterCycler RealPlex 4 (Eppendorf). Each 20 μL qPCR reaction contained 90 ng of cDNA ...
-
bioRxiv - Biophysics 2023Quote: ... with a micromanipulator InjectMan 4 (Eppendorf). The injection needles Femtotip II (Eppendorf ...
-
bioRxiv - Cell Biology 2020Quote: ... and cell debris was spun down at 20,000xg for 10 minutes at 4°C using a 5810 R Centrifuge (Eppendorf). Protein concentration was estimated using the Pierce BCA Protein Assay Kit (Thermo Fisher Scientific ...
-
bioRxiv - Bioengineering 2022Quote: ... Cells were harvested by centrifugation (3200 g, 40 min, 4 °C; Eppendorf centrifuge 5810 R, Eppendorf AG, Hamburg, Germany), and the cell pellets were stored (−20 °C) ...
-
bioRxiv - Biochemistry 2022Quote: ... The rest of the solution was incubated at 4°C for 1 hour on a thermomixer (Eppendorf, Hamburg, Germany) set to 1000 rpm ...
-
bioRxiv - Bioengineering 2021Quote: ... The tube was centrifuged for 10 min at 1,000x rpm at 4°C with minimum acceleration and deceleration (5810R Centrifuge, Eppendorf). Any fluid expelled was collected into 1.5 mL tubes ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf). The supernatant filtered through a 0.22-μm polyethersulfone membrane filter (# SLGP033RS EMD Millipore ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a new 15-mL polypropylene tube and centrifuged at 2,000 × g for 10 min at 4°C (# 5720R Eppendorf). The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf) ...
-
bioRxiv - Cell Biology 2020Quote: ... The homogenate was further incubated on ice for 45 min before centrifugation at 21,000 g and 4°C for 2 x 10 min in an Eppendorf 5424 R benchtop centrifuge (Eppendorf). Protein content of the lysate was determined by BCA assay (Thermo Fisher) ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... The sample was subsequently centrifuged for 1 h at 11,000 x g at 4°C in an Eppendorf tabletop centrifuge 5810R (Eppendorf). The phage pellet was resuspended in 400 μl DNAseI buffer (10 mM Tris-HCl ...
-
bioRxiv - Microbiology 2023Quote: ... harvested by centrifugation (3,500 × g for 20 min at 4°C, Centrifuge 5702 R, Eppendorf North America, Framingham, MA), and suspended in an equivalent amount of 1 × PBS ...
-
bioRxiv - Microbiology 2023Quote: ... The precipitated gDNA was pelleted by centrifugation (21,000 x g, 10 min at 4°C) in a tabletop centrifuge (Model 5424, Eppendorf). The supernatant was discarded by decantation ...
-
bioRxiv - Neuroscience 2022Quote: ... Lysates were centrifuged at 4°C at 15,000 RPM for 15 minutes in a table top centrifuge (Eppendorf 5424R). The supernatant’s protein concentration was measured using Bradford’s assay (Bio-Rad #5000202) ...
-
bioRxiv - Microbiology 2024Quote: ... the homogenate was centrifuged at 2500 rpm for 10 minutes at 4°C using a benchtop centrifuge (Eppendorf, USA), and the supernatant was collected.
-
bioRxiv - Biochemistry 2023Quote: ... Cells were washed in 20 mL of chilled phosphate-buffered saline (1X PBS, pH 7.4), and centrifuged (1500 ×g, 4 °C, 15 min) using the Centrifuge 5810R (Eppendorf). The cell pellet was subsequently resuspended in 30 mL of ice-cold RSB hypo buffer (10 mM NaCl ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Samples were centrifuged at 10,000 rpm at 4°C for 10 min and supernatants were dried under vacuum centrifugation (Eppendorf) overnight ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were then centrifuged at 13,000×g for 20 min at 4 °C using an F2402 rotor in a GS15R table-top centrifuge (Eppendorf). Pellets were air dried ...
-
bioRxiv - Neuroscience 2023Quote: ... and tubes centrifuged at 4 °C for 2 min at 12000 x g in a refrigerated microfuge (Eppendorf 5415R). The upper phase was discarded ...
-
bioRxiv - Physiology 2024Quote: ... The next day we centrifuged tubes with methanol and tissue (4°C, 2000rpm) for fifteen minutes (Eppendorf centrifuge 5810R). We carefully pipetted the supernatant (∼ 5mL ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were collected by centrifugation at 4,000 rpm for 10 minutes at 4°C using S-4x universal rotor (Eppendorf). Cell pellets from the 200 mL culture were dissolved in cell suspension buffer (20 mM HEPES:KOH pH 7.5 ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from a 25-mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) and resuspended in 0.5 mL of 3 M NaOAc pH4.5 supplemented with 10 mM EDTA ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from 50 mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) ...
-
bioRxiv - Microbiology 2024Quote: ... followed by centrifugation at 21,130 x g at 4°C for 10 min in a tabletop chilled centrifuge (Eppendorf). 250 μl of the clarified lysate was transferred to a pre-chilled tube and mixed with 750 μl of TRIZOL LS (Sigma ...
-
bioRxiv - Microbiology 2024Quote: ... The resulting parasite solution was pelleted at 1,000 x g at 4°C for 8 min using a chilled large tabletop centrifuge (Eppendorf). The pellet obtained from two D150 plates underwent three washes with intracellular buffer before being resuspended in 200 μl of ice-cold polysome lysis buffer (20 mM Tris pH 8.0 ...
-
bioRxiv - Microbiology 2024Quote: ... The parasite solution was pelleted at 1,200 x g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Microbiology 2024Quote: ... Debris was removed from sonicated lysates by centrifugation for 60 minutes at 4 °C and 14,000 × g in a 5910 R centrifuge (Eppendorf). The soluble lysate was then decanted and protein was purified using immobilized metal affinity chromatography ...