Labshake search
Citations for Eppendorf :
1501 - 1550 of 1598 citations for C Reactive Protein CRP ELISA Kit 5 Plate since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2020Quote: ... This isolation method included a penultimate centrifugation step in Eppendorf polypropylene conical tubes (10,000 x g for 30 min at 4°C, in Eppendorf rotor F-34-6-38) that allowed the removal/isolation of larger microvesicles ...
-
bioRxiv - Plant Biology 2022Quote: ... with incubation on ice for 1 h followed by centrifugation at 4 °C for 20 min at 20,000 g using an Eppendorf Centrifuge 5430R microcentrifuge (Eppendorf Canada Ltd, Mississauga, ON, Canada), supernatant combined and either used same day or stored at –80 °C.
-
bioRxiv - Biochemistry 2022Quote: ... Samples were heated at 90°C for 10 minutes at 1600 rpm using a thermal mixer with a 96 SmartBlock™ DWP 1000n attachment (Thermomixer C, Eppendorf Ltd., Stevenage, UK). Total starch content was determined using a Total Starch HK kit (Total Starch hexokinase kit ...
-
bioRxiv - Cell Biology 2023Quote: ... Protein pellets were dissolved in 0.1% RapiGest and 500 mmol/L TEAB and then incubated at 850 rpm for 45 min at 37 °C (Eppendorf Comfort Thermomixer, Eppendorf, USA). Proteins were digested by trypsin (Trypsin Gold ...
-
bioRxiv - Bioengineering 2023Quote: ... Transwells® were then incubated at 37 °C and 25 RPM for 2 hrs in a New Brunswich™ Innova® 40 shaker (Eppendorf, Enfield, CT). Samples were collected every hour from the basolateral side ...
-
bioRxiv - Cell Biology 2023Quote: ... SCs were proliferated in SFGM on Cytodex-1 microcarriers (Cytiva) in a 50c BioBLU single use vessel (Eppendorf; 37 °C, pH 7.2, 25 rpm) with a working volume of 40 L ...
-
bioRxiv - Biochemistry 2023Quote: ... 12,000 rpm was applied for 30 minutes at 4 °C to obtain the supernatant and then evaporated to obtain a dry metabolite pellet (Eppendorf Concentrator plus, Hamburg, Germany). For the NMR experiments ...
-
bioRxiv - Cell Biology 2020Quote: Peptides were eluted in 40 μL of 80% acetonitrile in 0.1% TFA and concentrated down to 5 μL by vacuum centrifugation (Concentrator 5301, Eppendorf, UK). The peptide sample was then prepared for LC-MS/MS analysis by diluting it to 5 μL by 0.1% TFA ...
-
bioRxiv - Cell Biology 2022Quote: ... Absorbance was measured at 600 nm after every 12 h intervals till 4 to 5 days using a UV-visible spectrophotometer (Eppendorf).
-
bioRxiv - Cell Biology 2019Quote: ... were detached with Trypsin-EDTA (0.25%) and pelleted by spinning them for 5 min at 1200 rpm (Eppendorf Centrifuge 5804). Cells were then re-suspended to 105 cells/mL in desiccation medium (50 mM Hepes and 500 mM trehalose in PBS ...
-
bioRxiv - Cancer Biology 2019Quote: ... and was injected at 1.5 µg/µl into the telencephalic vesicles of embryos in time-staged pregnant females using a Femtojet 4i microinjector (Eppendorf) then followed by electrical pulses (6 × 43 V ...
-
bioRxiv - Cancer Biology 2021Quote: ... 500 μL of 25 mM aqueous NH4HCO3 were added to each tube and incubated for 5 min at room temperature on a ThermoMixer (Eppendorf) at 700 rpm ...
-
bioRxiv - Cancer Biology 2021Quote: ... All solution was removed and 100 μL of acetonitrile was added to each tube and incubated for 5 min at room temperature on a ThermoMixer (Eppendorf) at 700 rpm ...
-
bioRxiv - Biochemistry 2021Quote: ... 10 mg ml−1 lactic acid in water) and added to 5 mg of pre-washed TiO2 beads and incubated for 30 min on a Thermomixer (Eppendorf) at 1200 rpm to keep the beads in suspension ...
-
bioRxiv - Cell Biology 2021Quote: ... was harvested by centrifugation at 300 × g for 5 min in a swing out 5804 S-4-72 rotor (Eppendorf). Baculovirus infected insect cell (BIIC ...
-
bioRxiv - Microbiology 2019Quote: ... The bacterial suspension was centrifuged at 5000 × g at room temperature for 5 minutes (Centrifuge 5430 R, Eppendorf AG, Germany). Then ...
-
bioRxiv - Cell Biology 2020Quote: Germinal vesicle intact oocytes were microinjected with ~5 pL of cRNAs in M2 medium containing milrinone at room temperature with a micromanipulator TransferMan NK 2 (Eppendorf) and picoinjector (Medical Systems Corp.) ...
-
bioRxiv - Immunology 2021Quote: RBD219-WT and RBD219-N1C1 were expressed at the 5 L scale using a Celligen 310 benchtop fermentation system (Eppendorf). For the RBD-WT ...
-
bioRxiv - Genomics 2022Quote: ... 3 mM MgCl2 and 0.1% Tween 20 in water) and centrifuged for 5 min at 500 g in a swinging bucket rotor centrifuge (5920R, Eppendorf). Nuclei pellets were resuspended in 1X Tagmentation Buffer (10 mM Tris pH 7.4 ...
-
bioRxiv - Plant Biology 2022Quote: ... The resulting pellet was re-suspended in 5 mL of modified CIB medium and centrifuged at 16,000 gav for 10 min in 5415R refrigerated centrifuge (Eppendorf, USA). The resulting supernatant was the Sucrose Gradient Load (SGL) ...
-
bioRxiv - Genomics 2022Quote: ... Eluted DNA was then passed through the column a second time and concentrated for hybridization to 5 μl with a SpeedVac Concentrator (Eppendorf).
-
bioRxiv - Bioengineering 2023Quote: ... The resulting injection micropipette was backfilled with 5-10 μL of 500 μg/mL fluorescein solution and was mounted on the microinjection manipulator (InjectMan 4, Eppendorf) connected to a pneumatic microinjection pump (FemtoJet 4i ...
-
bioRxiv - Bioengineering 2023Quote: ... in LB (10 g Tryptone, 5 g Yeast Extract, 10 g NaCl) grown in a 10 L BioFlo 320 Fermenter (Eppendorf). At inoculation ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... We collected these bacteria into KK2 with a sterile loop and diluted them to 1.5 OD600 in KK2 (∼5 × 108 cells, measured with an Eppendorf BioPhotometer). We used these bacteria as food for amoebas in our experiment and repeated this process anew for each of the three replicate experiments.
-
bioRxiv - Developmental Biology 2023Quote: ... were mixed in HEPES-CZB medium containing 5 μg/ml cytochalasin B (CB) and injected into the cytoplasm of fertilized eggs using a FemtoJet microinjector (Eppendorf) with constant flow settings ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... We collected these bacteria into KK2 with a sterile loop and diluted them to 1.5 OD600 in KK2 (∼5 x 108 cells, measured with an Eppendorf BioPhotometer). We used these bacteria as food for amoebas in our experiment and repeated this process anew for each of the three replicate experiments.
-
bioRxiv - Cell Biology 2023Quote: ... is harvested by centrifugation at 300 × g for 5 min in a swing out 5804 S-4-72 rotor (Eppendorf). P1 virus was used to infect 50 ml of SF9 culture and P2 virus was harvested after 3-5 days through centrifugation and subsequent filtration through 0.45 μm PVDF membrane (Merck Millipore ...
-
bioRxiv - Synthetic Biology 2024Quote: ... The cell suspension was then transferred to a pre-chilled electroporation cuvette and after approximately 5 – 10 min electroporated in the eporator electroporator (Eppendorf) set to 1850 V ...
-
bioRxiv - Cell Biology 2024Quote: ... The culture was maintained in a humidified atmosphere containing 5% CO2 at 37 L in a cell incubator (Eppendorf, Germany). The medium was changed daily ...
-
bioRxiv - Genomics 2021Quote: ... Reactions were prepared in triplicate in a 96-well optical plate using the epMOTION® M5073 automated liquid handling system (Eppendorf, Cat. no. 5073000205D). qPCR conditions were as follow ...
-
bioRxiv - Cell Biology 2020Quote: ... the beads were separated from the protein extracts on a magnetic rack and transferred to a new 2 ml LoBind tube (Eppendorf). The beads were washed with 1 ml of each following solution ...
-
bioRxiv - Biophysics 2021Quote: The gp15-gp16 core complex was obtained in vitro after incubation of the purified proteins for 30 min at room temperature (RT) in a thermo block with shaking (Eppendorf). The proteins were incubated using 180 pmol each at a 1:1 ratio ...
-
bioRxiv - Cancer Biology 2021Quote: ... 30-70 kDa lane portions were excised into 2×2 mm cubes and transferred to Protein Lo-Bind tubes (Eppendorf). Excised gels were partitioned into tubes ...
-
bioRxiv - Molecular Biology 2020Quote: ... one milliliter of NS1 recombinant protein (3 mg/ml in 2x PBS) was placed into a 1.5 ml Eppendorf tube (Eppendorf, Germany); and the tube mixed for 66 hours (55°C ...
-
bioRxiv - Microbiology 2022Quote: ... trypsin was inactivated with 1:1 complete media and the cell suspension was collected into a 5mL protein-low bind centrifuge tube (Eppendorf). To remove residual trypsin ...
-
bioRxiv - Genomics 2022Quote: ... and the pellet was resuspended in 500 ul Buffer CT and the mixture was transferred to a 2.0 mL Protein LoBind tube (Eppendorf # 022431102). The suspension was spun again at 16,000 x g at 4 C for 2 min and the supernatant discarded ...
-
bioRxiv - Genomics 2022Quote: ... The supernatant (∼200 ul) was transferred to a 70uM filter (Fisher # NC1444112) set in a new 1.5 mL Protein LoBind tube (Eppendorf # 022431081). The tube with the 70 uM filter was spun on a mini-centrifuge (Ohaus # FC5306 ...
-
bioRxiv - Biochemistry 2021Quote: ... and a concentration of 5 µg / ml of the plasmid with GFP (Green Fluorescent Protein) were transferred to an electroporation cuvette (2 mm wide and 400 µl in volume (Eppendorf)) ...
-
bioRxiv - Neuroscience 2022Quote: At time of collection asteroids were transferred to a 1.5 mL Protein LoBind Eppendorf (Eppendorf cat#022-43-108-1) and allowed to settle ...
-
bioRxiv - Biochemistry 2021Quote: ... 1 mL of 200 µM monomeric αSyn was incubated in fibrillation buffer (Supplementary Table S2) in a 1.5 mL Protein LoBind Eppendorf tube (Eppendorf, Germany) on an orbital shaker (PCMT Thermoshaker Grant-bio ...
-
bioRxiv - Cancer Biology 2021Quote: ... 1 mM β-glycerol phosphate and 2.5 mM Na2H2P2O7).) and cells scraped and transferred into Protein Lo-bind tubes (Eppendorf). Samples were sonicated for 10 cycles (30s on & 40s off ...
-
bioRxiv - Molecular Biology 2021Quote: ... The beads were pelleted (600 x g, 2 min) and the supernatant was transferred to a fresh low protein binding tube (Eppendorf). The beads were washed with 2 × 300 μL HPLC grade water and the washes combined with the original supernatant ...
-
bioRxiv - Neuroscience 2022Quote: ... Tissues were fixed in 2% paraformaldehyde for 55 minutes at room temperature in 2 mL Protein LoBind tubes (Eppendorf 022431064). Fixative was removed and tissues were washed 4x 10 minutes with 1.5 mL PBS with 0.5% Triton X-100 (PBT) ...
-
bioRxiv - Plant Biology 2023Quote: ... Protein concentration in the supernatant was determined according to the Bradford Ultra method (Bradford, 1976) on a Bio-Spectrophotometer (Eppendorf) at 595 nm ...
-
bioRxiv - Evolutionary Biology 2023Quote: ... Samples were then centrifuged at 14,000xg for 10 minutes to pellet insoluble debris and the resultant clarified lysate was transferred to a fresh protein LoBind tube (Eppendorf).
-
bioRxiv - Microbiology 2023Quote: ... The beads were pelleted (600 x g, 3 min) and the supernatant transferred to a fresh low protein binding tube (Eppendorf). The beads were washed with 1 x 200 µL HPLC-grade water and the washes combined with the original supernatant ...
-
bioRxiv - Microbiology 2024Quote: ... A volume of 1 nL containing 500 ng/μL mRNA coding for each of these proteins was injected into one-cell stage embryos using the FemtoJet 4i microinjector (Eppendorf). H2O was used as reference control.
-
bioRxiv - Molecular Biology 2024Quote: ... though the maximum volume of beads + gDNA + binding buffer should not exceed 1.4 ml for a single 1.5 ml Protein LoBind tube (Eppendorf, Cat. 30108442). Multiple tubes can be used and pooled at the restriction enzyme digest step ...
-
bioRxiv - Bioengineering 2024Quote: ... the scaffolds were immersed in 1.5 mL BMP-2 (100 µg/mL) diluted in PBS in a low protein-binding falcon tube (Eppendorf, UK). The bottom of the tube was gently tapped on a surface to remove any bubbles between the pores of the scaffold to allow the solution to completely contact the scaffold ...
-
bioRxiv - Biochemistry 2020Quote: ... polar phase were transferred into a new 2 mL reaction tube and dried in a vacuum concentrator (Eppendorf, Concentrator plus, mode: V-AQ, 30 °C) for approximately 4.5 h ...