Labshake search
Citations for Eppendorf :
801 - 850 of 1278 citations for 6 propan 2 yl 1 3 5 triazine 2 4 diamine since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cancer Biology 2022Quote: ... Cells were incubated at 37°C in humidified 5% CO2 incubators (Eppendorf or Thermo Fisher Scientific, USA).
-
bioRxiv - Cancer Biology 2022Quote: A 5 µL aliquot from each sample was transferred into a 1.5 mL Protein LoBind tube (Eppendorf) that contained 15 µL lysis buffer and 1 µL 25U/µL Benzonase (Millipore) ...
-
bioRxiv - Microbiology 2022Quote: ... Each culture was centrifuged for 5 min at 7,000 rpm in a benchtop centrifuge (5424 R, Eppendorf). The bacterial pellets were resuspended in approximately 100 µL media ...
-
bioRxiv - Microbiology 2020Quote: ... Organ homogenates were spun at 290g for 5 min to pellet the cell debris (Eppendorf 5810R centrifuge). 20 µl of organ homogenates were then serial diluted into 12-well plates containing confluent Vero cells ...
-
bioRxiv - Biochemistry 2022Quote: ... proteins were thawed and spun at 20,000 xg for 5 min at 20°C (Eppendorf microcentrifuge, Germany). The protein concentration was determined by measuring the absorbance at 11 = 280 nm and/or 11 = 488 nm (for GFP-labelled proteins ...
-
bioRxiv - Bioengineering 2022Quote: ... Cell- and drug-containing plates were then centrifuged for 5 minutes at 135 x g (Eppendorf 5810R), then incubated for 72 hours at 37°C in 5% CO2 humidified atmosphere with gas permeable plate sealing film (VWR) ...
-
bioRxiv - Microbiology 2022Quote: ... Phage were allowed to adsorb for 5 min at 37°C/900 rpm in a thermomixer (Eppendorf). The cells were placed on ice for 5 min and then washed twice with 500 µL of phage-LB to remove free phage ...
-
bioRxiv - Microbiology 2022Quote: ... Heated samples were immediately centrifuged at 16,100 RCF for 5 min using a benchtop centrifuge (Eppendorf, Australia) set at 4°C ...
-
bioRxiv - Cancer Biology 2024Quote: ... Around 5 x 105 or fewer cells were used for staining (96 well plate or Eppendorf tubes). Cells were centrifuged at 1500 rpm for 5 minutes at 4°C ...
-
bioRxiv - Synthetic Biology 2023Quote: ... coli genomic DNA was denatured for 5 min at 95 °C in a PCR thermocycler (Eppendorf Mastercycler), then incubated at 65 °C for 60 min ...
-
bioRxiv - Systems Biology 2023Quote: ... Peptides were collected by centrifugation at 700×g for 5 minutes and transferred to LoBind tubes (Eppendorf). The filter plate was washed once with 100 µL 50% ACN in H2O followed by a wash with 100 µL of 100% ACN ...
-
bioRxiv - Systems Biology 2024Quote: The flow through is first incubated at 95°C for 5 minutes (ThermoMixer C, Eppendorf, Hamburg, Germany), then the sample is allowed to cool for 5 minutes at RT ...
-
bioRxiv - Neuroscience 2023Quote: ... Trypsin was neutralised with complete media and centrifuged at 1000rpm for 5 minutes (Eppendorf Centrifuge 5702, U.K.). Post centrifugation ...
-
bioRxiv - Cell Biology 2020Quote: ... and cell debris was spun down at 20,000xg for 10 minutes at 4°C using a 5810 R Centrifuge (Eppendorf). Protein concentration was estimated using the Pierce BCA Protein Assay Kit (Thermo Fisher Scientific ...
-
bioRxiv - Bioengineering 2022Quote: ... Cells were harvested by centrifugation (3200 g, 40 min, 4 °C; Eppendorf centrifuge 5810 R, Eppendorf AG, Hamburg, Germany), and the cell pellets were stored (−20 °C) ...
-
bioRxiv - Microbiology 2019Quote: ... The tube was centrifuged for 10 min at 2000 rpm using an A-4-81 swinging-bucket rotor (Eppendorf). The oil was carefully decanted ...
-
bioRxiv - Bioengineering 2019Quote: ... for 5 minutes at 3,500 RPM (2,465 x g, Eppendorf 5810R v3.3 centrifuge with A-4-62 rotor, Eppendorf, Hamburg, Germany) with an additional 30-minute incubation on the bench ...
-
bioRxiv - Bioengineering 2021Quote: ... MNPs were injected into cells using a micro manipulation system (Inject-Man 4 and FemtoJet 4i, Eppendorf, Hamburg, Germany) with microinjection capillaries (Femtotip II ...
-
bioRxiv - Cancer Biology 2020Quote: ... −3.6 D/V: −1.6 with 4 µl of transfection mix using a pulled glass capillary and a FemtoJet microinjector (Eppendorf). In utero electroporation was performed at day E15.5 ...
-
bioRxiv - Synthetic Biology 2021Quote: ... Cells were then pelleted by centrifugation at 3900 rcf for 15 min (Eppendorf S5810R with S-4-104 rotor) and stored at -80 °C.
-
bioRxiv - Microbiology 2019Quote: ... USA) followed by centrifugation at 7000 × g at 4° C for 10 minutes (Centrifuge 5430 R, Eppendorf AG, Germany). The resulting supernatant was used as the WCP sample and stored at -20° C until used.
-
bioRxiv - Biochemistry 2019Quote: ... The supernatant from 300 × g was transferred to new 15mL tube and then centrifuged at 2,000 × g for 10 min at 4°C (# 5720R Eppendorf). The supernatant from 2,000 × g was transferred to 30mL conical tube and then centrifuged at 10,000 × g for 10 min at 4°C (# Avanti J-E JA25-50 Beckman Coulter) ...
-
bioRxiv - Bioengineering 2021Quote: ... The tube was centrifuged for 10 min at 1,000x rpm at 4°C with minimum acceleration and deceleration (5810R Centrifuge, Eppendorf). Any fluid expelled was collected into 1.5 mL tubes ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf). The supernatant filtered through a 0.22-μm polyethersulfone membrane filter (# SLGP033RS EMD Millipore ...
-
bioRxiv - Neuroscience 2020Quote: ... The supernatant was transferred to a new 15-mL polypropylene tube and centrifuged at 2,000 × g for 10 min at 4°C (# 5720R Eppendorf). The supernatant was transferred to a 30-mL conical tube and centrifuged at 10,000 × g for 10 min at 4°C (#5424R Eppendorf) ...
-
bioRxiv - Cell Biology 2022Quote: ... Samples were then centrifuged at 13,000×g for 20 min at 4 °C using an F2402 rotor in a GS15R table-top centrifuge (Eppendorf). Pellets were air dried ...
-
bioRxiv - Cell Biology 2022Quote: ... 4 mM MgCl2) was carefully injected into an individual cardiomoycyte by a glass pipette via the CellTram injector (Eppendorf). After 5 minutes dye spreading to neighboring cardiomyocytes was visualized by Zeiss Axio Examiner A1 using a 40× objective and images were taken using TILL Photonics LA software (version 2.3.0.18 ...
-
bioRxiv - Plant Biology 2023Quote: ... samples (stored for 4-12 weeks) were thawed at room temperature for 15 mins and centrifuged (Eppendorf Centrifuge 5417C) at 11,000 rpm for 14 mins to extract bulk leaf sap ...
-
bioRxiv - Neuroscience 2022Quote: ... Lysates were centrifuged at 4°C at 15,000 RPM for 15 minutes in a table top centrifuge (Eppendorf 5424R). The supernatant’s protein concentration was measured using Bradford’s assay (Bio-Rad #5000202) ...
-
bioRxiv - Cell Biology 2023Quote: ... The incubated sample was centrifuged at 20,800 g for 15 min at 4 °C (Rotor F45-30-11, Eppendorf), and the resulting supernatant was analyzed by immunoblotting using various antibodies ...
-
bioRxiv - Cell Biology 2023Quote: ... fractions numbered from 9 to 22 were processed by centrifugation (20,800 g for 30 min at 4 °C, Rotor F45-30-11, Eppendorf), and the resulting pellet was further resuspended in 160 μL of alkaline carbonate buffer (100 mM Na2CO3 ...
-
bioRxiv - Bioengineering 2023Quote: All centrifugation experiments were conducted in an Eppendorf 5702R centrifuge with a swing bucket rotor (Eppendorf, A-4-38) at 20°C ...
-
bioRxiv - Microbiology 2023Quote: ... harvested by centrifugation (3,500 × g for 20 min at 4°C, Centrifuge 5702 R, Eppendorf North America, Framingham, MA), and suspended in an equivalent amount of 1 × PBS ...
-
bioRxiv - Microbiology 2023Quote: ... The precipitated gDNA was pelleted by centrifugation (21,000 x g, 10 min at 4°C) in a tabletop centrifuge (Model 5424, Eppendorf). The supernatant was discarded by decantation ...
-
bioRxiv - Microbiology 2024Quote: ... the homogenate was centrifuged at 2500 rpm for 10 minutes at 4°C using a benchtop centrifuge (Eppendorf, USA), and the supernatant was collected.
-
bioRxiv - Biochemistry 2023Quote: ... Cells were washed in 20 mL of chilled phosphate-buffered saline (1X PBS, pH 7.4), and centrifuged (1500 ×g, 4 °C, 15 min) using the Centrifuge 5810R (Eppendorf). The cell pellet was subsequently resuspended in 30 mL of ice-cold RSB hypo buffer (10 mM NaCl ...
-
bioRxiv - Pharmacology and Toxicology 2023Quote: ... Samples were centrifuged at 10,000 rpm at 4°C for 10 min and supernatants were dried under vacuum centrifugation (Eppendorf) overnight ...
-
bioRxiv - Physiology 2024Quote: ... The next day we centrifuged tubes with methanol and tissue (4°C, 2000rpm) for fifteen minutes (Eppendorf centrifuge 5810R). We carefully pipetted the supernatant (∼ 5mL ...
-
bioRxiv - Microbiology 2024Quote: ... The cells were collected by centrifugation at 4,000 rpm for 10 minutes at 4°C using S-4x universal rotor (Eppendorf). Cell pellets from the 200 mL culture were dissolved in cell suspension buffer (20 mM HEPES:KOH pH 7.5 ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from a 25-mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) and resuspended in 0.5 mL of 3 M NaOAc pH4.5 supplemented with 10 mM EDTA ...
-
bioRxiv - Microbiology 2024Quote: ... The cells from 50 mL culture were collected by centrifugation (4,000 rpm, 10 min, at 4°C in S-4x universal rotor (Eppendorf)) ...
-
bioRxiv - Microbiology 2024Quote: ... followed by centrifugation at 21,130 x g at 4°C for 10 min in a tabletop chilled centrifuge (Eppendorf). 250 μl of the clarified lysate was transferred to a pre-chilled tube and mixed with 750 μl of TRIZOL LS (Sigma ...
-
bioRxiv - Microbiology 2024Quote: ... The resulting parasite solution was pelleted at 1,000 x g at 4°C for 8 min using a chilled large tabletop centrifuge (Eppendorf). The pellet obtained from two D150 plates underwent three washes with intracellular buffer before being resuspended in 200 μl of ice-cold polysome lysis buffer (20 mM Tris pH 8.0 ...
-
bioRxiv - Microbiology 2024Quote: ... The parasite solution was pelleted at 1,200 x g at 4°C for 10 min using a chilled large tabletop centrifuge (Eppendorf). The resulting pellet underwent 3 washes with intracellular buffer ...
-
bioRxiv - Neuroscience 2024Quote: ... Blood was collected into SAFE-T-FILL capillary collection tubes (RAM Scientific) on ice and then centrifuged at 4°C for 10 min at 14,000 rpm (Centrifuge 5804R, Eppendorf). Plasma was aliquoted into Eppendorf tubes and stored at -80°C ...
-
bioRxiv - Systems Biology 2022Quote: ... each SCN was cut into 3 pieces with a scalpel on a glass slide and transferred to a protein LoBind tube (Eppendorf, Hamburg, Germany) prefilled with 250 µL lysis buffer (100 mM Tris-HCl ...
-
bioRxiv - Microbiology 2022Quote: ... were also added to each tube and incubated at 37°C for 3 h in a thermomixer (Eppendorf Thermomixer C, Hamburg, Germany). After 3 h incubation ...
-
bioRxiv - Biophysics 2023Quote: ... and the device was left running for a minimum of 3 h while droplets were being collected in a 1.5 mL microcentrifuge tube (Eppendorf®, Hauppauge, NY).
-
bioRxiv - Biophysics 2023Quote: ... Cell growth was quantified at intervals by measuring their optical density at regular intervals (as mentioned in Figure 3) using a Biophotometer® D30 (Eppendorf, Germany). The morphology of cells at different growth stages was determined by a variety of microscopic techniques (as described in the below sections).
-
bioRxiv - Plant Biology 2024Quote: ... The samples were then incubated for 3 h at 37 °C with 600 rpm shaking on a thermomixer with a ThermoTop (Eppendorf, Hamburg, Germany) to reduce condensation into the caps of collection tubes ...