Labshake search
Citations for Thermo Fisher :
2601 - 2650 of 10000+ citations for FSTL1 Mouse HEK 293 His since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2021Quote: ... M-OPG2 and S-OPG2 were generated by inserting the respective cDNAs in frame between NheI and AflII sites of a pcDNA5/FRT/V5-His vector (Invitrogen) containing a C-terminal OPG2 tag (MNGTEGPNFYVPFSNKTG) ...
-
bioRxiv - Cell Biology 2021Quote: qPCR analysis was performed using the LabTaq Green Hi Rox (Labtech) following manufacturer’s instructions on a QuantStudio 6 Flex Real-Time PCR System (Applied Biosystems) and primers listed in Supplementary Table S4.
-
bioRxiv - Plant Biology 2021Quote: ... fused with a six-HIS tag at the C-terminus were expressed using the Bac-to-Bac baculovirus expression system (Invitrogen) in High Five cells at 22 °C as reported previously 23 ...
-
bioRxiv - Microbiology 2021Quote: ... Amplified fragments were digested with KpnI and XhoI and cloned into the pre-cut pcDNA4/myc-His A vector (Invitrogen) by using the DNA ligation Kit (Takara) ...
-
bioRxiv - Microbiology 2019Quote: ... the sequence coding for vpa0226 was amplified using primers 5’ GATCCTGCAGATGCTTAAAATTAAACTGCCT 3’ and 5’ GATA GAATTCTTACTTATCGTCGTCATCCTTGTAATC 3’ and then cloned into the pBAD/Myc-His vector (Invitrogen, resistance changed from ampicillin to kanamycin ...
-
bioRxiv - Molecular Biology 2022Quote: ... with FLAG sequence flanking at 5’ end of the primer and cloned in Hind III and Xba I site of pCDNA3.1V5-His (Invitrogen, USA). Clones were sequenced with T7 and BGH primer using ABI BigDyeTerminator V3.1 cycle sequencing kit followed by automated sequencing in ABI 3130 Genetic Analyzer according to manufacturer’s protocol.
-
bioRxiv - Microbiology 2019Quote: ... 1 nM of CAT protein (Chloramphenicol acetyltransferase, containing a 6×His tag at C-terminus) expressed in the same baculovirus-expression system (ThermoFisher) was used to coat plate wells ...
-
bioRxiv - Microbiology 2020Quote: ... 2015) were produced from C6/36 cell line cultured in L-15 (HyClone) supplemented with 1.5% HI-FBS (ThermoFisher Scientific), 10% tryptose phosphate ...
-
bioRxiv - Cell Biology 2022Quote: The cDNA coding for fibulin1C (Uniprot number P23142-4) with a C-terminal 6x His tag was custom-synthesized by Invitrogen and transiently transfected in HEK293 T cells using polyethylenimine in OPTIMEM (Invitrogen ...
-
bioRxiv - Developmental Biology 2022Quote: ... F 5’-GAACTGTCCAGATGCCCTTCCAGTT-3’ and R 5’-GCATCTGGACAGTTCTGGGAAGCCCG-3’) was cloned by PCR and ligated into the pEF6/V5-His TOPO plasmid vector (Invitrogen). FBLN7-V5-His vector was transfected into CHO cells (FBLN7-CHO ...
-
bioRxiv - Cell Biology 2022Quote: His- and GST-tagged CFAP418 proteins were expressed in One Shot™ BL21 Star™ (DE3) cells (ThermoFisher, Waltham, MA) and purified using HisPur™ Ni-NTA resin and Pierce™ Glutathione Superflow Agarose ...
-
bioRxiv - Microbiology 2022Quote: ... A recombinant SPATR (rSPATR) fused to a polyhistidine tag (His-tag) was produced in BL21-CodonPlus-RIL competent cells (Invitrogen) and protein purification was performed under denaturing conditions using Ni-NTA Agarose (Qiagen ...
-
bioRxiv - Cell Biology 2022Quote: ... cell lines were maintained in Ham’s F12 media (Hi Media, India) supplemented with (10%) fetal bovine serum (FBS, Gibco, USA). Plasmids were either expressed stably (FR-GPI ...
-
bioRxiv - Microbiology 2020Quote: ... using the primers in Table II and after digestion with BamHI and XhoI was cloned into pCDNA™3.1/myc-His A (Invitrogen). CHIKV structural genes were initially PCR amplified from pDONR21-CHKVstr (60 ...
-
bioRxiv - Molecular Biology 2020Quote: ... following which protein-protein complexes were purified with Pierce(tm) His Protein Interaction Pull-Down Kit (Thermo Fisher Scientific, #21277) following manufacturer’s instructions ...
-
bioRxiv - Molecular Biology 2020Quote: ... Human Drosha cDNA with a Flag-tag at the amino-terminus and a 6 x his tag at the carboxyl-terminus was cloned into pcDNA4/TO (Invitrogen) to construct the inducible WT Drosha expressing plasmid for immunoprecipitation assay and ubiquitination assay ...
-
bioRxiv - Genomics 2020Quote: ... We then amplified the library using Hi-fidelity KAPA PCR kit (KAPA) for 6 cycles and quantified the library using Qubit high sensitivity DNA assay (Thermofisher). We performed QC using bioanalyzer (Agilent ...
-
bioRxiv - Genomics 2020Quote: ... We then amplified the library using Hi-fidelity KAPA PCR kit (KAPA) for 6 cycles and quantified the library using Qubit high sensitivity DNA assay (Thermofisher). We performed QC using bioanalyzer (Agilent ...
-
bioRxiv - Microbiology 2021Quote: The SARS-CoV-2 NTD (residues 13-303) or RBD (residues 319-541) with a C-terminal His tag was cloned into a modified pFastBac vector (Invitrogen) that encodes a melittin signal peptide before the NTD or RBD ...
-
bioRxiv - Immunology 2020Quote: ... containing the gp67 secretion signal peptide and a C-terminal 6×His tag was inserted into pFastBac-Dual vectors (Invitrogen) and transformed into DH10Bac component cells ...
-
bioRxiv - Microbiology 2021Quote: ... VF-Hi and VF-Lo (generated from this study) were maintained in Dulbecco′s Modified Eagle′s Medium (DMEM) (Gibco) supplemented with 10% FBS ...
-
bioRxiv - Microbiology 2021Quote: ELISA assays were performed in 96-microwell plates coated with 150 ng/well of SARS-CoV-2 Spike (aa 16-1213) His-tagged recombinant protein (ThermoFisher) and 1010 phage or AAVP particles/50 μL of PBS O.N ...
-
bioRxiv - Microbiology 2022Quote: ... which were subsequently purified and ligated upstream the His-tag into the expression vector pTrcHis2 (Invitrogen™, cat. n° V36520). The recombinant vectors were transformed into the ΔarsC E ...
-
bioRxiv - Genetics 2022Quote: ... The blasticidin resistance gene coding sequence was amplified by PCR with the primers BlasS SacII F1 and BlasS BamHI R3 from pcDNA6/V5-His-A (Invitrogen):
-
bioRxiv - Microbiology 2022Quote: ... qRT-PCR was performed using the qPCRBio SyGreen Mix Hi-ROX (PCR biosystems) according to the manufacturer’s instructions and run on the Real Time PCR QuantStudio3 (ThermoFisher scientific) using the following conditions – Initial denaturation step at 95□ °C for 2 minutes ...
-
bioRxiv - Molecular Biology 2022Quote: ... The supernatant obtained after the centrifugation of the lysate at 9000 rpm for 25 minutes at 4°C was subjected to overnight binding with Hi-bind Ni-NTA agarose beads (Invitrogen). The beads were washed 4-5 times with wash buffer (20mM Tris ...
-
bioRxiv - Cancer Biology 2019Quote: ... The PCa cells were maintained in F-12K media with 10% HI fetal bovine serum (FBS) (Gibco, Grand Island, NY). Once reaching 80-90% cellular confluence ...
-
bioRxiv - Cell Biology 2019Quote: ... Infected Sf9 cells were grown in spinner culture for 48–96 h at 27°C and His-tagged protein-purified using Ni2+-NTA agarose (Invitrogen) according to standard procedures ...
-
bioRxiv - Microbiology 2020Quote: ... fused to a Gly-Ser-Gly linker and a Myc epitope tag into the EcoRV site of pEF1 V5 His C (Invitrogen) using NEB HiFi Assembly Mix (New England Biolabs ...
-
bioRxiv - Synthetic Biology 2020Quote: ... flow cytometry and in vivo binding assays) were subcloned via NcoI/EcoRI or HindIII/BamHI into either the pBAD/His A (Invitrogen) or pZA23MCS (EXPRESSYS ...
-
bioRxiv - Evolutionary Biology 2019Quote: ... and SC-His-Ura (for Ty1his3-AI) or YEPD + Geneticin (G418; 200 μg/ml for Ty1neo-AI) (ThermoFisher, Waltham MA) plates ...
-
bioRxiv - Biochemistry 2020Quote: The C-terminal fragments of Stu2 used in the pulldown experiments were cloned into a pLIC vectors with a TEV-cleavable N-terminal 6-His tag and transformed into Bl-21 AI cells (Invitrogen). Cells were grown to an OD600 of 0.6 in TB media with 0.1% glucose and were induced by addition of IPTG and arabinose to 200 μM and 0.2% ...
-
bioRxiv - Physiology 2021Quote: ... The resulting cell pellet was resuspended in hypotonic buffer and used for Western blotting using HRP-conjugated anti-His antibody (1: 10,000; Novex, Life technologies).
-
bioRxiv - Biochemistry 2020Quote: ... the opsin-encoding constructs were fused in frame with a C-terminal 8-His tag and subcloned into the pPIC9K (A1ACR1, HfACR1 and AlACR2) or pPICZα (AlACR3) vector (Invitrogen) according to the manufacturer’s instructions.
-
bioRxiv - Biochemistry 2019Quote: ... blocked with 5% milk in TBST and probed with 6x-His Tag Monoclonal Antibody (HIS.H8) (ThermoFisher MA1-21315, 1:3000). Blots were incubated with primary antibodies overnight at 4 °C with rocking and were then washed (3×5min ...
-
bioRxiv - Cell Biology 2019Quote: ... and sequencing was performed on an Ion Proton system using with Ion PI Hi-Q sequencing kit (Thermo Fisher Scientific) the PI v3 chip (Thermo Fisher Scientific) ...
-
bioRxiv - Immunology 2021Quote: ... The expression vectors encoding mHVEM (Q39-Q206) fused with human IgG1 and a subsequent hexa-His tag sequences were transfected into Expi293 (Gibco) cells using ExpiFectamine 293 transfection kit (Gibco ...
-
bioRxiv - Immunology 2021Quote: ... The DNA sequences encoding a protein biologic composed of mHVEM residues (Q39- Q206) followed by human IgG1 and a subsequent hexa-His tag sequences were cloned into pcDNA 3.3 vector (Life technologies) using In-fusion HD cloning enzyme premix (Clontech) ...
-
bioRxiv - Molecular Biology 2020Quote: Plasmid encoding the N-terminally His-tagged Msm HelD protein was prepared by the GeneArt® Plasmid Construction Service (Thermofisher). Gene construct for HelD expression was designed by codon-optimized back translation of gene MSMEG_2174 from Msm (strain ATCC 700084 / mc2 155 ...
-
bioRxiv - Microbiology 2020Quote: ... The His-tagged protein was purified from the cleared cell lysate by nickel affinity chromatography (Ni-NTA agarose beads, Invitrogen). After washing with increasing concentrations of imidazole ...
-
bioRxiv - Biochemistry 2021Quote: ... Proteins were transferred onto a nitrocellulose membrane and analyzed by western blotting using an anti-His tag antibody (7) or stained with Krypton fluorescent dye (ThermoFisher) according to a company’s instruction ...
-
bioRxiv - Biochemistry 2021Quote: ... Insoluble material was clarified for 10 min at 4°C at 16k rcf and incubated with 60 μl Dynabeads HIS-Tag isolation (10104D, Invitrogen) for 2 hour with rotation at 4°C ...
-
bioRxiv - Microbiology 2021Quote: ... 0.01% Tween 20 and 50μM acetyl phosphate) containing 10 μl of pre-washed (3X) magnetic cobalt beads (Dynabeads His-Tag Isolation and Pulldown - Invitrogen) for a final volume of 200 μl in 96-well plates and incubated for 40 min at room temperature on a rotating wheel ...
-
bioRxiv - Biophysics 2020Quote: ... with an N-terminal gp67 signal peptide for secretion and a C-terminal 6×His tag for purification was inserted into pFastBac-Dual vector (Invitrogen). The construct was transformed into bacterial DH10Bac component cells ...
-
bioRxiv - Immunology 2021Quote: ... were coated at room temperature for 8 hours with 1 μg/mL 6x-His tag polyclonal antibody (PA1-983B, ThermoFisher), followed by overnight blocking with blocking buffer containing 5% milk/1x PBS/0.01% Tween-20 at 4°C ...
-
bioRxiv - Microbiology 2020Quote: ... The PCR amplicon was digested with EcoR I and Age I and cloned to the same sites in pAc5.1/V5-His B (Thermo Scientific) to express the His-tagged protein ...
-
bioRxiv - Microbiology 2020Quote: ... using the primers described in Table II followed by restriction digestion with BamHI and XbaI and ligation into pcDNA-V5/His (Invitrogen). The MV H and HPIV-1 HN were PCR amplified using the primers shown in Table II from genomic RNA of MV ...
-
bioRxiv - Immunology 2021Quote: ... or in sterile Sorting Medium [RPMI 1640 supplemented with 10% (v/v) Heat-Inactivated Fetal Bovine Serum (HI-FCS; A3840001; Gibco)] ...
-
bioRxiv - Genetics 2019Quote: ... were joined with the PCR amplified wild-type or activated Tkv cytoplasmic domain in the pIB/V5-His vector (ThermoFisher). The activated Tkv chimera (Tac-TkvA ...
-
bioRxiv - Immunology 2021Quote: ... The proteins were then purified by immobilized metal affinity chromatography by using HisPur Ni-NTA (Purify His-tagged recombinant fusion proteins using high-capacity nickel-nitrolotriacetic acid methal-chelate beads) spin columns (ThermoFisher). Recombinant proteins were refolded on the column by gradually removing urea until reaching to a concentration 0 M and then dialyzed against PBS ...