Labshake search
Citations for Beckman :
451 - 500 of 2122 citations for Human G Protein Coupled Receptor Family C Group 6 Member A GPRC6A ELISA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2022Quote: ... coupled with AMPure XP bead purification (Beckman Coulter) with 18-22 ng of rRNA-depleted RNA as an input ...
-
bioRxiv - Biochemistry 2019Quote: ... low-density lipoprotein cholesterol (LDL-C) and high-density lipoprotein cholesterol (HDL-C) using commercially-available kits (Beckman-Coulter, CITY, STATE, USA). Serum insulin concentration was determined using an electrochemiluminescence-based assay (Immulite 2000 ...
-
bioRxiv - Molecular Biology 2021Quote: ... The centrifugation is performed on a SW60Ti rotor at 40 000 g for 22 minutes at 4°C (Beckman Optima L-90K Ultracentrifuge). The mitochondrial fraction (400µL ...
-
bioRxiv - Molecular Biology 2020Quote: ... and plasma was separated by centrifugation (2,000 × g, 20 min, 4 °C) in a Microfuge 20R (cat. no. B30149, Beckman Coulter, Brea, CA, USA). Plasma was transferred to new 1.5 mL microcentrifuge tubes and further clarified by centrifugation (10,000 × g ...
-
bioRxiv - Biophysics 2022Quote: ... shortly sonified and centrifuged for 30 min at 100 000 g at 4°C (Centrifuge Beckman Coulter Optima XPN-80, Rotor type 70.1).) ...
-
bioRxiv - Biophysics 2022Quote: ... The samples were centrifuged for 30 min at 100 000 g at 4°C (Centrifuge Beckman Coulter Optima XPN-80, Rotor type 70.1). The supernatant ...
-
bioRxiv - Microbiology 2020Quote: ... CLP assembly reactions were incubated at 25°C for 30 min before loading onto 15-30% (wt/wt) sucrose gradients and spinning at 159,599 X g for 43 min at 4°C (Beckman Coulter TLS 55 rotor). Gradients were immediately fractionated and aliquots of each fraction were denatured by boiling in 1% SDS to ensure antibody access ...
-
bioRxiv - Bioengineering 2020Quote: ... and the supernatant was centrifuged again at 26000 × g at 4 °C for 15 min using an Optima L-90K (Beckman Coulter, Brea, CA) ultracentrifuge with a 70-Ti fixed angle rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2021Quote: ... supernatants were collected and centrifuged with 150.000 x g (at rav) for 30 min at 4 °C using an Optima™ MAX-XP Ultracentrifuge (Beckman Coulter; TLA120.2 rotor). Pellets were resuspended in PBS and 4 µg of primary antibody were added for 30 min ...
-
bioRxiv - Biochemistry 2020Quote: ... The sample was centrifuged at 4°C for 1 hour and 40 minutes at 182,753 x g (38,000 rpm in a Beckman Coulter Type 42.2 Ti rotor).
-
bioRxiv - Biophysics 2020Quote: ... 150 μl of the sample was ultracentrifuged at 22°C and 205000 × g for 19 min (TLA 100.3, Beckman Coulter Inc., Fullerton, California). The experiments were performed in HEPES buffer ...
-
bioRxiv - Bioengineering 2021Quote: ... The samples were then centrifuged at 12,000 g for five minutes at 4°C to remove tissue debris with a Microfuge™ 22R centrifuge (Beckman Coulter, Brea, CA). The RNA was extracted using the Invitrogen PureLink™ RNA Mini Kit (Thermo Fisher ...
-
bioRxiv - Bioengineering 2021Quote: ... The tubes were then centrifuged at 1000 g for 15 minutes at 4°C using a Microfuge™ 22R (Beckman Coulter, Brea, CA), and the serum was then stored at -80°C ...
-
bioRxiv - Microbiology 2021Quote: ... and extracellular vesicles including exosomes and virions were pelleted by ultracentrifugation at 141,000 g at 4 °C for 2 h in a swinging-bucket rotor (SW28; Beckman Coulter, Brea, CA, USA). The pellet was resuspended in filtered PBS and centrifuged at 18,300 g and 4°C for 10 min to remove insoluble aggregates ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM ATP and 1 mM PMSF) and centrifuged for 15 h at 4°C and 74 400 x g (Beckman SW 32.1 Ti). From the gradient ...
-
bioRxiv - Microbiology 2021Quote: ... resuspended in 150 μl 0.1 M HEPES/NAOH pH 7.0 and purified for 48 h (250,000 × g, 4 °C; Beckman Optima LE-80K, rotor SW60-Ti) using a CsCl gradient (0.45 g/ml ...
-
bioRxiv - Microbiology 2019Quote: ... and the remaining 32 mL were centrifuged at 500 × g for 3 min at 4°C (Allegra X-15R, Beckman Coulter, Villepinte, France) to spin down the remaining meat fibers and debris ...
-
bioRxiv - Biophysics 2022Quote: ... Fractions of EV-specific density were then pooled together and subsequently concentrated via ultracentrifugation (100,000 × g, 4 h, 4 °C) through a 20% w/v sucrose cushion in a SW41 rotor (Beckman Coulter, Fullerton, CA, USA). The resulting supernatant was discarded ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were fractionated by OptiPrep density gradient ultracentrifugation (100,000 × g, 18 h, 4 °C) using a SW41 rotor (Beckman Coulter, Fullerton, CA, USA) through a continuous 5–40% OptiPrep (Sigma-Aldrich ...
-
bioRxiv - Immunology 2022Quote: ... followed by ultracentrifugation at 110,000 × g for 90 min at 4°C on an Optima XPN -100 ultracentrifuge with SW32Ti rotor (Beckman Coulter, Brea, CA, USA). The isolated EVs was washed with PBS and followed with a secondary ultracentrifugation (110,000 × g for 90 min at 4°C) ...
-
bioRxiv - Microbiology 2020Quote: ... EMVs were obtained by ultracentrifugation from 4 mL of filtrate at 100,000 × g (average centrifugal force) and 4°C for 2 h with an OptimaX centrifuge (Beckman Coulter, Brea, CA, USA). The pellets were resuspended in 400 μL of Dulbecco’s phosphate-buffered saline (DPBS ...
-
bioRxiv - Pharmacology and Toxicology 2019Quote: ... for 10 m at 4°C and pelleted the lysates at 50,000×g for 1 h at 4°C using an Optima MAX-XP ultracentrifuge (Beckman Coulter, Brea, CA, USA). We resuspended cell fractions in 500 μL water and stored the samples at 4°C until analysis ...
-
bioRxiv - Microbiology 2021Quote: ... Ten milliliters of allantoic or amniotic fluid was centrifuged at maximum speed (16,000 × g) for 30 min at 4 °C using a floor ultra centrifuge (Beckman Optima L-60 Ultracentrifuge). After removal of the supernatant ...
-
bioRxiv - Microbiology 2019Quote: ... the extracts were added on top of layers in LCM buffer with 45% and 5% glycerol and ultracentrifuged at 77 000 x g for 1 h at +4°C (Beckman Coulter SW41Ti rotor). Viral nucleocapsids were recovered from the bottom of the ultracentrifuge tube ...
-
bioRxiv - Cell Biology 2020Quote: ... followed by serial centrifugation at 100’000 g for 120 min at 10 °C (Beckman fixed-angle TL110 rotor; Beckman Optima Max-TL ultracentrifuge). The so obtained P100 pellets ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor, Beckman Avanati J-25, Beckman Coulter). The resulting pellets were washed again and resuspended in 500 μl potassium phosphate buffer ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor, Beckman Avanti J-25, Beckman Coulter). Pellets were washed with 20 mM potassium phosphate (pH 7.5 ...
-
bioRxiv - Microbiology 2023Quote: ... cells were pelleted by centrifugation at 6,000 ×g at 4 °C for 15 min with ALLEGRA X-30R (Beckman Coulter, Brea, CA, USA). The supernatant was centrifuged at 15,000 ×g at 4 °C for 15 min with Sorvall LYNX4000 (Thermo Scientific ...
-
bioRxiv - Cancer Biology 2022Quote: ... the sample was centrifuged at 268,000 ×g at 4°C for 38 min with an MLA-50 rotor (Beckman Coulter, Brea, CA, USA). The top layer and subsequent 10 fractions (fractions 1–10 ...
-
bioRxiv - Plant Biology 2023Quote: ... The disrupted cells were subjected to ultracentrifugation at 4°C and 235000 g for 1h (Beckman Optima™ L-80 XP, rotor Ti45). The resulting supernatant was loaded onto an Äkta purifier system (GE HealthCare ...
-
bioRxiv - Cancer Biology 2023Quote: ... the supernatant was ultracentrifuged at 100,000 × g at 4°C for 90 min using Beckman Coulter Optima™ XE-90 Ultracentrifuge (Beckman Colter, Brea, CA) equipped with Type 45 Ti rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the resulting G-actin mix was ultracentrifuged at 90K rpm for 30 minutes at 4°C in an ultracentrifuge (Beckman, Optima TL 100) to remove actin oligomers and/or aggregates.
-
bioRxiv - Bioengineering 2023Quote: ... The diluted sample was then centrifuged using a Beckman ultracentrifuge (Optima L90K) with two cycles of 1h10 at 110,000 x g at 4°C (rotor type 70Ti, Beckman Floor Ultracentrifuge Optima L90K). Between them ...
-
bioRxiv - Biophysics 2023Quote: ... Virions were banded by density gradient centrifugation at 152,000 x g for 16 h at 4°C in a SW41 rotor (Beckman Coulter SRL, Milan, Italy). The gradient was then fractionated ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... the cell lysate was layered on top of a discontinuous OptiPrep® gradient (50 %, 35 %, 30 %, 20 %, and 15 %) and centrifuged at 135,000 g for 1 h at 4°C (Beckman L8-80M Ultracentrifuge, USA). The melanin pellet was recovered ...
-
bioRxiv - Cell Biology 2024Quote: ... and centrifuged at 16,500 × g (14,500 rpm) at 4°C for 20 min using a Type Ti 45 fixed-angle rotor (Beckman Coulter, k-factor 1.275) to isolate large EVs ...
-
bioRxiv - Microbiology 2020Quote: ... 25,000 × g (20 min) and 100,000 × g (30 min; Beckman TLA100.3 rotor) to collect membrane fractions ...
-
bioRxiv - Cell Biology 2023Quote: ... cells were blocked in 2% human serum and PBS for 30 min at 4°C and stained with DC-SIGN (Beckman Coulter #A07407), CD80 (BioLegend #305214) ...
-
bioRxiv - Microbiology 2019Quote: ... RNA was density separated by centrifugation at 124 000 g at 20 °C for 65 h using an Optima L-90 XP ultracentrifuge (Beckman Coulter, Brea, California, USA). 13 fractions were obtained from each sample ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... and supernatants were ultracentrifuged at 37 000 rpm (~100 000 g) and 10°C for 1h (Beckman Optima LE-80 K; rotor 70.1.Ti). Pellets were resuspended in 100μL of buffer (10 mM Tris-HCL ...
-
bioRxiv - Biophysics 2021Quote: ... Following incubation (37 °C, 20-24 h), the samples were ultracentrifuged (1h, 288’000 x g) (Optima TLX Ultracentrifuge, Beckman Coulter, TLA-120.2 Beckman rotor) to remove large aggregates ...
-
bioRxiv - Microbiology 2020Quote: ... and layered on top of a two-step sucrose gradient (20%/50% w/v in HNE) and centrifuged for 2 h at 154 000 x g at 4 °C in a SW41 rotor (Beckman Coulter, Woerden, the Netherlands) to clear from cell debris ...
-
bioRxiv - Neuroscience 2022Quote: ... The samples were then spun at 31000 x g (18468 rpm) for 5 min at 4°C in a fixed-angle rotor (50.2 Ti rotor in Beckman Coulter Optima L-100 XP) with slow brake ...
-
bioRxiv - Molecular Biology 2023Quote: ... and were centrifuged at 120,000 g for 120 minutes at 4°C with a MLA55 fixed-angle rotor using an Optima MAX-XP ultracentrifuge (Beckman Coulter, California, United States). The pelleted hVSMCs EVs were resuspended in 100 μL PBS and washed in 13.2 mL PBS by ultracentrifugation at 120,000 g for 60 minutes at 4°C ...
-
bioRxiv - Developmental Biology 2021Quote: ... inhibin B and AMH/MIS by 2-site ELISA (Beckman Coulter and Beckman Coulter Gen II ...
-
bioRxiv - Immunology 2020Quote: ... Virus replication kinetics was monitored by SIV Gag p27 production in the supernatant using an SIV core antigen ELISA assay kit (Beckman Coulter, Miami, FL). To assess the properties of SHIV-Ag85B ...
-
bioRxiv - Microbiology 2020Quote: ... Prepared phage suspension was transferred to U-formed centrifuge tubes suitable for ultra-centrifugation (25 000 × g, 120 min, 4 °C) (Beckman Coulter, Optima™ MAX-XP). Pellets were resuspended in 200 µL of SM buffer and phage stock suspensions were stored at 4°C and −80°C.
-
bioRxiv - Neuroscience 2019Quote: ... The ultracentrifuge tubes were centrifuged at 124000 x g at 4 ° C for 30 minutes in Optima L-100XP ultracentrifuge (Beckman Coulter, SW 55 Ti rotor). The resulting pellet was suspended in 50 μL of TKM with protease inhibitors and commercial phosphatases (78440 ...
-
bioRxiv - Cell Biology 2021Quote: ... This lysate was sonicated for 2 min (15 s on and 20 s off for 2 min at 20% amplitude) and centrifuged at 100,000 x g for 40 min at 4°C (Avanti J-301 Beckman Coulter centrifuge with rotor JA-30.50). The supernatant was filtered and passed through preequilibrated 5 ml HisTrap FF columns (GE Healthcare) ...
-
bioRxiv - Biochemistry 2023Quote: ... Pellets were washed and gently resuspended in 1 ml of PBS and centrifuged at 50,000 × g for 1 h at 4°C (Beckman Optima MAX-E, TLA-55 rotor). The resulting pellets were resuspended in 500 μl of PBS to obtain concentrated lentiviral stocks that were stored at −80°C in aliquots ...