Labshake search
Citations for Beckman :
251 - 300 of 585 citations for 3 Iodo 2 6 dimethyl benzoic acid since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2023Quote: ... The reactions were then layered on 100 μL of 32% sucrose cushion and centrifuged at 42,800 rpm for 3 hours in a Beckman TLA 100 rotor using the Optima-Max TL ultracentrifuge (Beckman Coulter). After centrifugation ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was centrifuged at 300,000×g at 4°C for 3 h in a TLA-110 fixed angle rotor (k-factor 13) (Beckman Coulter). The pellet was resuspended in 10 µL PBS of which 3 µL was adsorbed onto glow-discharged 2 nm carbon layer coated Quantifoil R1.2/1.3 400 mesh gold grids ...
-
bioRxiv - Molecular Biology 2023Quote: 8 mL of viral supernatant on a 3 mL of 20% sucrose cushion were ultracentrifugated for 3 h at 100,000 x g at 4°C using an Optima L80-XP instrument (Beckman Coulter). After ultracentrifugation ...
-
bioRxiv - Microbiology 2023Quote: ... Each tube was centrifuged for 3 hours at 150’000 x g (4°C) using an Optima XPN-80 ultracentrifuge (Beckman Coulter) equipped with a SW 32 Ti swinging bucket (369650 ...
-
bioRxiv - Cell Biology 2023Quote: ... The obtained supernatant was layered onto 30 w/v% sucrose solution in ultracentrifugation tubes and subjected to ultracentrifugation at 100,000 × g for 3 h at 4°C using SW32Ti rotor (Beckman courter). The collected sucrose solutions were mixed with PBS and washed by ultracentrifugation at 100,000 × g for 1 h ...
-
bioRxiv - Molecular Biology 2022Quote: ... The gradients were ultra-centrifuged for 3 h at 175,000g at 4°C in a SW41Ti rotor (Beckman-Coulter, USA) and analyzed by measuring the absorbance continuously at 260 nm using a piston gradient fractionator (Biocomp Instruments) ...
-
bioRxiv - Molecular Biology 2022Quote: ... and spun at 40,000 rpm for 3 hours at 4°C using a SW 41 Ti Swinging-Bucket Rotor (Beckman Coulter). Sucrose gradient fractionation was performed by using a Brandel Density Gradient Fractionation System ...
-
bioRxiv - Microbiology 2022Quote: ... HUVECs or LECs were infected for 3 days and the GFP positive population was quantified by CytoFLEX S (Beckman Coulter). Here ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Microbiology 2024Quote: ... The flow cytometry analysis of the bacterial cells present in the suspension was performed using a Cytoflex flow cytometer (CytoFLEX 3; Beckman) as previously described (Supplementary Fig ...
-
bioRxiv - Cancer Biology 2024Quote: ... The fragments were repaired the 3’and 5’overhangs using End repair mix (component of SureselectXT) and purified using Agencourt AMPure XP Beads (Beckman). The purified fragments were added with ‘A’ tail using A tailing Mix (component of SureSelectXT ...
-
bioRxiv - Neuroscience 2024Quote: ... at a ratio of 1:2.3 before layering on 3 ml of SCB in a 12 ml Thinwall Ultra-clear centrifuge tubes (Beckman Coulter). Samples were centrifuged at 30,000 xg for 45 min at 4 °C using a SW41 Ti swinging bucket rotor (Beckman Coulter ...
-
bioRxiv - Biochemistry 2023Quote: ... The sucrose density gradient was centrifuged at 50,000 rpm for 3 hours at 4°C in a TLS-55 swinging bucket rotor (Beckman Coulter) with minimum acceleration up to 5,000 RPM and deceleration with no break ...
-
bioRxiv - Bioengineering 2023Quote: ... For performing cryogenic transmission electron microscopic imaging EVs were centrifuged and washed in PBS at 100,000 x g for 3 hours at 4°C in a SW41 Ti rotor (Beckman Coulter).
-
bioRxiv - Cell Biology 2023Quote: ... The concentrated CFS was then ultracentrifuged at 100,000 ˗ g and 4 °C for 3 h (Optima L-80 XP Ultracentrifuge with Type 70.1 Ti Fixed-Angle Titanium Rotor (Beckman Coulter)) ...
-
bioRxiv - Microbiology 2022Quote: ... The sample-containing tube was spun at 347,000 × g and 20°C for 3 hours using Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Microbiology 2022Quote: ... 20 mL of the filtrate was then ultracentrifuged at 150,000 × g at 4°C for 3 h (Beckman Coulter, USA) through a 20% (w/v ...
-
bioRxiv - Molecular Biology 2023Quote: ... using 10-40 % sucrose gradients in buffer A after 3 hours of centrifugation at 35,000 rpm and 4 °C in SW41 rotor (Beckman Coulter). To isolate ribosomes for structural analysis ...
-
bioRxiv - Molecular Biology 2024Quote: ... The gradient was centrifuged at 54,000 rpm for 3 h at 4 °C using a SW55 Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Equivalent amounts of cell lysates prepared as described above were loaded onto the sucrose gradients and spun at 35,000 g for 3 hours at 4°C in a SW41 rotor (Beckman Coulter). After centrifugation the polysomes were fractionated and absorbance was monitored at 254 nm for RNA and 680 nm for GFP using the TriaxTM Flowcell (BioComp Instruments) ...
-
bioRxiv - Cell Biology 2023Quote: ... transferred to a Corning 250 mL centrifuge tube (430776) and then spun again at ∼1000xg (2000rpm in a Beckman Coulter Allegra 6 with a GH3.8 rotor) for 10min at RT with no brake ...
-
bioRxiv - Cancer Biology 2021Quote: ... decrosslinked material was purified with 2 x AMPure XP beads (Beckman Coulter, Cat #A63881) and eluted in 30 μL of 10 mM Tris-Cl ...
-
bioRxiv - Neuroscience 2020Quote: ... DRG were then centrifuged for 2 min at 1000 rpm (Beckman Allegra X15R, 233xg), supernatant aspirated ...
-
bioRxiv - Molecular Biology 2020Quote: ... and centrifuged for 2 hours at 55,000 rpm (TLS-55 rotor, Beckman Coulter, USA). 11x 200 μl fractions were harvested and subjected to FLAG-IP ...
-
bioRxiv - Cancer Biology 2021Quote: ... resuspended in 300μl PBS/2%FBS and FACS analysed on Gallios® (Beckman Coulter) or ARIAIII (BD) ...
-
bioRxiv - Biophysics 2023Quote: ... 2 mM DTT) with 0.7 M sucrose in Type 45 Ti tubes (Beckman-Coulter). Ribosomes were pelleted by centrifugation at 27,000 rpm (57,000 xg ...
-
bioRxiv - Cancer Biology 2023Quote: ... concentrated for 2 h by ultracentrifugation in swing-out rotor SW-32Ti (Beckman Coulter), 26,000g ...
-
bioRxiv - Plant Biology 2023Quote: ... followed by ultracentrifugation at 4°C for 2 h (38000 rpm, Beckman, SW41 rotor) through a 20-60% sucrose gradient (40 mM Tris-HCl pH 8.4 ...
-
bioRxiv - Physiology 2023Quote: ... Samples were ultracentrifuged at 100,000 rpm at 16°C for 2 hours (rotor: Beckman TLA-100 ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... Illumina RNASeq sequencing (HiSeq 2000, 2 × 75 pb) and trimming were performed by Beckman Coulter Genomics ...
-
bioRxiv - Molecular Biology 2023Quote: ... and ultra-centrifuged for 2 hours at 20,000 rpm in an SW28 rotor (Beckman). Viral pellets were resuspended in 250 µL PBS and flash-frozen ...
-
bioRxiv - Systems Biology 2023Quote: ... Adapter ligation was followed by 2 successive Agencourt AMPure XP bead purifications (Beckman Coulter) and library amplification by a Plasmodium-optimized KAPA PCR amplication protocol ...
-
bioRxiv - Microbiology 2024Quote: ... and 2 mM dithiothreitol (DTT)) and centrifuged in an SW-41 Ti rotor (Beckman) for 2 h at 40,000 rpm ...
-
bioRxiv - Molecular Biology 2024Quote: ... PCR-2 product was cleaned up with Ampure XP bead-based reagent (Beckman Coulter). Library concentration and purity was verified using the Qubit dsDNA HS kit (Invitrogen ...
-
bioRxiv - Genomics 2024Quote: ... DNA was cleaned up and concentrated with 2× AMPure XP beads (Beckman Coulter; A63882). DNA was eluted in 30µL of Buffer EB (Qiagen ...
-
bioRxiv - Plant Biology 2020Quote: MP of pollen protoplasts was assessed by staining with 1 µM DiBAC4(3) for 5 min (Breygina et al. 2010) on Gallios flow cytometer (Beckman Coulter), analysis was performed with FlowJo software (TreeStar) ...
-
bioRxiv - Genetics 2020Quote: ... PCR products were pooled by region of interest using 2-3 μL of each reaction and the resulting pools of products were purified using a 1X Ampure XP cleanup (Beckman Coulter). Purified libraries were pooled and submitted for paired-end 150 cycle sequencing on an Illumina MiSeq ...
-
bioRxiv - Genomics 2021Quote: ... Cells were washed with 25 mm supplemented HBSS before depleting the sample of unnucleated cells using IOTest 3 Lysing solution (Beckman Coulter) following provider instructions ...
-
bioRxiv - Microbiology 2021Quote: ... triplicate spore preparations were made in 3 ml of 20% glycerol and suspended in Isoton II (Beckman Coulter, Brea, CA, USA). The particle volume was then measured for a minimum of 100 000 particles per sample using a Multisizer 4e Coulter counter (Beckman Coulter ...
-
bioRxiv - Cell Biology 2020Quote: ... with densities ranging from 1.10 to 1.15 were pooled and washed in PBS (Beckman Ti50, 3 h at 42 000 rpm).
-
bioRxiv - Microbiology 2022Quote: A 3 ml volume of pseudoparticles was pelleted using a TLA-55 rotor with an Optima-MAX-E ultracentrifuge (Beckman Coulter) for 2 hours at 42,000 rpm at 4°C ...
-
bioRxiv - Molecular Biology 2022Quote: ... Samples were then enriched in DNA sizes between 200 and 600 bp (corresponding to 1 to 3 nucleosomes) using AMPure XP magnetic beads (Beckman-Coulter), following the manufacturer’s guidelines ...
-
bioRxiv - Cell Biology 2020Quote: ... 3 ml of 50% and 3 ml of 40% sucrose) in Ultra-Clear Beckman tubes and centrifuged at 26000 rpm (SW32Ti rotor, Beckman Coulter) for 1 h at 4°C ...
-
bioRxiv - Biochemistry 2020Quote: ... and pelleted for 3 min in a swing-out rotor at 1000 rpm in a tabletop centrifuge (Allegra X-30R, Beckman Coulter). The supernatant was aspirated and cells were suspended in the remaining liquid to 1 × 105 – 1 × 107 cells/100 μl ...
-
bioRxiv - Microbiology 2020Quote: ... The supernatant was ultracentrifuged at 120,000 g for 3 h at 4°C using an MLS-50 rotor (Beckman Coulter, USA) to collect 120k pellet vesicles ...
-
bioRxiv - Biophysics 2021Quote: The aggregation products formed in Eppendorf tubes under agitation conditions at pH 3 and pH 4 were centrifuged using an Optima MAX-XP ultracentrifuge (Beckman Coulter) in a TLA-55 rotor at 40,000 rpm at 20°C for 45 min ...
-
bioRxiv - Genomics 2020Quote: ... We carried out the first round of PCR for 3 cycles and purified the reactions with Ampure XP beads (Beckman-Coulter). We then carried out a second round of PCR with primers targeting the P5 and P7 sequences only ...
-
bioRxiv - Cancer Biology 2022Quote: ... Cells were harvested after 3 days and counted using a Z2 Coulter Particle Count and Size Analyzer (Beckman Coulter, Brea, CA).
-
bioRxiv - Cancer Biology 2024Quote: ... The percentage of fluorescence-positive cells was determined initially (baseline reference, passage 0, 3 days after transduction) and all following passages using the CytoFLEX Flow Cytometer (Beckman Coulter). In each passage ...
-
bioRxiv - Cell Biology 2023Quote: ... 30% Percoll (v/v)] followed by 3 mL of MRB in a 13 mL ultracentrifuge tube (Beckman Instruments, Inc, CA 331372) and spun at 95,000 x g for 45 min in a TH641 rotor ...