Labshake search
Citations for Beckman :
201 - 250 of 725 citations for Mouse 20S Proteasome 20S PSM CLIA Kit since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Synthetic Biology 2022Quote: ... Cells were lysed using a sonicator to deliver ~ 8000 J of energy and lysate was clarified at 18000 rpm in a JA-20 rotor (Beckman) for 30 min at 4 °C ...
-
bioRxiv - Biophysics 2023Quote: ... Reactions were centrifuged at 400,000 g at 20 °C for 15 min in polycarbonate centrifuge tubes (Beckman Coulter Inc. USA). The pellets were resuspended in 40 μl reaction buffer ...
-
bioRxiv - Genomics 2023Quote: ... the supernatant was cleared by two rounds of centrifugation at 20,000 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter) followed by centrifugation at 31,900 ×g (10 min ...
-
bioRxiv - Genomics 2023Quote: ... Precipitated ribosomes were pelleted at 20,000 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). To remove residual supernatant the pellet was re-centrifuged for 5 min at 20,000 ×g ...
-
bioRxiv - Genomics 2023Quote: ... The suspension was incubated on ice for 5 min and centrifuged at 20,000 ×g (10 min, 4 °C, JA-20 rotor, Avanti J-26 XP, Beckman Coulter). The pellet was re-centrifuged for 5 min and both supernatants were combined into a new tube ...
-
bioRxiv - Cell Biology 2023Quote: ... 5 mM Mg(OAc)2) and centrifuged for 20 min at 100,000 x g in a 70Ti rotor (Beckman Coulter). The resulting membrane pellet was resuspended in 1 ml rough microsome (RM ...
-
bioRxiv - Plant Biology 2023Quote: ... The cAW was collected by spinning at 700 x g for 20 min at 4 ⁰C (JA-14 rotor, Beckman Coulter ...
-
bioRxiv - Neuroscience 2023Quote: ... Homogenized tissue was sonicated 20 times with 1 sec pulses and then centrifuged using a SW55 Ti rotor (Beckman Coulter) at 42,700 rpm for 15 min at 4°C ...
-
bioRxiv - Cancer Biology 2023Quote: ... Samples homogenized in lysis buffer were loaded onto a 5%-20% linear gradient and centrifugated at 37,000 rpm for 170 min at 4°C in an SW41Ti rotor (Beckman Coulter).
-
bioRxiv - Cell Biology 2023Quote: ... whole cells (per sample) were pelleted via centrifugation at 1,700 xg (JA 20 rotor, Beckman Coulter Inc, Brea, CA, USA) for 10 min at room temperature ...
-
bioRxiv - Immunology 2023Quote: ... at 950 rpm for 10 min at 20°C and centrifuged at 15,000 rpm (Beckman Coulter Microfuge® 22R refrigerated microcentrifuge, Beckman Coulter Australia Pty Ltd ...
-
bioRxiv - Biophysics 2023Quote: Sedimentation velocity experiments of PTPN3-Bidomain were carried out at 20°C using an analytical ultracentrifuge (Beckman Coulter Optima AUC) equipped with a AN60-Ti rotor ...
-
bioRxiv - Immunology 2023Quote: ... and purified and concentrated by ultracentrifugation on a 20% sucrose cushion (24,000 rpm and 4°C for 2 hours with a SW32Ti or SW28 rotor (Beckman Coulter)) ...
-
bioRxiv - Biochemistry 2023Quote: ... by dounce homogenization (20 strokes).The lysate was clarified by centrifugation at 56,000 rpm in a Type 70 Ti rotor (Beckman Coulter) at 4°C for 1 hour ...
-
bioRxiv - Cell Biology 2023Quote: ... and pelleted at 100,000xg for 20 min at 4 °C using fixed angle rotor (TLA-100 rotor, Beckman Coulter, 349481) in a benchtop ultracentrifuge (OptimaTL ...
-
bioRxiv - Molecular Biology 2024Quote: ... they were collected by centrifugation at 13,894 rpm (16,000 rcf) at 4 ºC for 20 min using the SX241.5 rotor in an Allegron X-30R centrifuge (Beckman Coulter). Subsequently ...
-
bioRxiv - Biochemistry 2023Quote: ... The reaction mixture was centrifuged at 60,000 g for 20 min at 30°C in an ultracentrifuge Optima MAX-XP (Beckman Coulter), and the resulting microtubule pellet was gently washed with warm PEM buffer containing 10% DMSO ...
-
bioRxiv - Bioengineering 2024Quote: ... The sample tubes were then centrifuged at 347,000 × g and 20°C for 3 hours using a Type 70 Ti rotor (Beckman Coulter). 1-mL fractions were collected from the top of the tube ...
-
bioRxiv - Microbiology 2023Quote: ... Sample analysis was performed by mixing 5 µl of fluorescent vesicles with 20 µl of Flow-Count Fluorospheres (Beckman Coulter) in a final volume of 200 µl of PBS to determine absolute counts ...
-
bioRxiv - Biochemistry 2024Quote: ... The cells were sonicated for 6-8 cycles of 20 secs and centrifuged at 40.000 rpm in MLA 80 rotor (Beckman coulter) for 45 min ...
-
bioRxiv - Cell Biology 2021Quote: ... then 2ml of 40% sucrose (in buffer C) and 1ml of 20% sucrose (in buffer C) were sequentially overlaid and the SW55 tubes (13×51 mm, Beckman Coulter) were centrifuged at ∼150,000×g (38,500 RPM ...
-
bioRxiv - Neuroscience 2019Quote: ... with 2 ml of a 20% sucrose in dPBS cushion and ultracentrifugated at 20,000 RPM (Beckman Coulter SW 32 Ti rotor) at 4°C for 2 hours ...
-
bioRxiv - Genetics 2020Quote: ... The homogenates were incubated on ice for 15–20 min and then centrifuged at 3000xg for 10 min at 4°C in a GPR Data Settop centrifuge (Beckman, Inc.). The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042 ...
-
bioRxiv - Neuroscience 2020Quote: ... Each pool of samples was then purified using 79 μL beads buffer (20% PEG-8000 in 2.5 M NaCL, final concentrations) and 50 μL Ampure XP Beads (Beckman Coulter, A63881), and eluted in 7 μL NF H2O.
-
bioRxiv - Biochemistry 2020Quote: ... to remove intact cells and the supernatant was centrifuged again at 25,000 g for 1 hour (Beckman Coulter JA- 20 rotor). The pellet was resuspended in lysis buffer and sodium cholate was added to a final concentration of 1% and stirred at 4°C for 1 hour ...
-
bioRxiv - Cell Biology 2021Quote: ... The sample was overlaid with decreasing concentrations of Nycodenz (30%, 20%, 10% and 0%) and centrifuged in a SW55 rotor (Beckman Coulter) 2h 30 min at 55000 rpm and 4°C ...
-
bioRxiv - Microbiology 2021Quote: ... triplicate spore preparations were made in 3 ml of 20% glycerol and suspended in Isoton II (Beckman Coulter, Brea, CA, USA). The particle volume was then measured for a minimum of 100 000 particles per sample using a Multisizer 4e Coulter counter (Beckman Coulter ...
-
bioRxiv - Plant Biology 2022Quote: ... diluted four times with 5 mM HEPES-KOH pH = 7.5 and centrifuged at 21,5000 rpm for 20 min (Beckman Coulter JA 25.50).
-
bioRxiv - Plant Biology 2022Quote: ... Thylakoid membranes were extracted via ultracentrifugation at 24,000 rpm for 1 h and 20 min (Beckman Coulter SW 32 Ti rotor). Thylakoids were collected from the step gradient interphases with a Pasteur pipet ...
-
bioRxiv - Biochemistry 2021Quote: ... Cells were incubated for 2h at 20°C in an AN60-Ti rotor in the Optima-AUC analytical ultracentrifuge (Beckman Coulter) before data acquisition for 15h at 42,000 rpm ...
-
bioRxiv - Microbiology 2020Quote: ... the virus was purified and concentrated on a 20% sucrose cushion in phosphate buffered saline (PBS) in Ultra Clear Centrifuge tubes (Beckman Coulter), via ultracentrifugation at 4°C at 31,000 x g in a SW32Ti swinging bucket rotor (Beckman Coulter) ...
-
bioRxiv - Microbiology 2020Quote: Larger amounts of MV-ZIKV and control MV supernatants were spun through a 20% sucrose cushion in an SW32 Ti rotor (Beckman, Inc.) at 25,000 rpm for 2 hours ...
-
bioRxiv - Neuroscience 2022Quote: ... dispersed and collected in a single tube and further centrifuged for 4 hours at 21000 rpm in a 20% sucrose gradient (SW55 Beckman rotor). The resulting pellet was suspended in 100 μl PBS and the virus was aliquoted (5-10 μl ...
-
bioRxiv - Cell Biology 2020Quote: ... Reconstituted nucleosome samples were overlaid onto the sucrose gradient and spun at 32000 rpm for 20 h at 4 ° using SW55Ti rotor (Beckman Coulter) in Beckman Optima L80 ...
-
bioRxiv - Immunology 2019Quote: ... CECs were pre-incubated with human recombinant CCL5 (1-1000 ng/ml, R&D) and/or CD35 blocking antibody (5-20 μg/ml, clone J3D3, Beckman Coulter) for an hour prior to infection.
-
bioRxiv - Cell Biology 2020Quote: FCS-EV depleted medium was first prepared by centrifuging DMEM with 20% FCS at 200Kg overnight with a 45Ti rotor (Beckman Coulter). Supernatant was then recovered by pipetting without taking the last 5mL to avoid disturbing the pellet ...
-
bioRxiv - Biochemistry 2021Quote: ... to remove intact cells and the supernatant was centrifuged again at 25,000 RCF for 1 hour (Beckman Coulter JA-20 rotor). The pellet was resuspended in lysis buffer and sodium cholate was added to a final concentration of 1% and stirred at 4°C for 1 hour ...
-
bioRxiv - Developmental Biology 2021Quote: ... The samples were then loaded onto 20%-50% sucrose gradients and ultracentrifuged in a SW41 Ti swinging-bucket rotor (Beckman 331362) at 38,000 rpm for 2.5 h at 4 °C ...
-
bioRxiv - Microbiology 2020Quote: ... Pellets were solubilised in 150 μL of cold TNE buffer and a volume of 1.5 ml was laid on a five step 20 - 60% (w/v) sucrose gradient prepared in Ultra-Clear 13 ml tubes (Beckman Coulter). The tubes were centrifuged at 35,000 rpm for 2h at 4°C in a Beckman SW41 rotor ...
-
bioRxiv - Microbiology 2020Quote: ... The filtrate was subsequently centrifuged at 4,000 rpm for 20 minutes using an Avanti J-26 XPI centrifuge (Beckman Coulter, Inc.) to concentrate the bacterial consortium and remove residual organic carbon from the media ...
-
bioRxiv - Microbiology 2020Quote: ... the 4 tubes were centrifuged using JA-20 rotor at 43,000 × g for 1 hour and 30 minutes in Beckman coulter® Avanti j-26 xp (Beckman, France). The pellets of the 4 tubes were preserved at −80°C before transport and metagenome sequencing and analysis.
-
bioRxiv - Microbiology 2021Quote: ... and either aliquoted or concentrated by ultracentrifugation using 20% (w/v) sucrose cushions for 2 hours at 25,000 rpm in an SW41 or SW28 rotor (Beckman, Indianapolis, IN). Alternatively ...
-
bioRxiv - Genomics 2021Quote: ... A second set of PacBio libraries were constructed using the manufacturer’s protocol and were size selected for 20 kb fragments on the BluePippen system (Sage Science) followed by subsequent purification using AMPure XP beads (Beckman Coulter). Sequencing was performed by the University of Delaware DNA Sequencing & Genotyping Center.
-
bioRxiv - Genomics 2022Quote: ... samples were then transferred to a new 96-well plate at a standard volume (typically 20-30 μL) using a BioMek FXp liquid handler (Beckman Coulter). This plate was diluted to a final TIME-Seq starting concentration of 10 ng/μL using the Mantis liquid handler.
-
bioRxiv - Biochemistry 2022Quote: ... to remove intact cells and the supernatant was centrifuged again at 25,000 RCF for 1 hour (Beckman Coulter JA-20 rotor). The pellet was resuspended in lysis buffer and sodium cholate was added to a final concentration of 1% and stirred at 4°C for 1 hour ...
-
bioRxiv - Synthetic Biology 2023Quote: ... Droplets were made by either manually pipetting 0.05-0.1 μL droplets or dispensing individual 2.5 nL - 20 nL droplets using an Echo 550 acoustic liquid handler (Beckman Coulter, USA) into 2 μL of the lipid-oil phase in 384-well microplate ...
-
bioRxiv - Microbiology 2023Quote: ... The isopycnic centrifugation of DNA was performed with an initial CsCl buoyant density of 1.725 g mL-1 subjected to centrifugation at 177,000 × g for 36-40 h at 20 °C in an Optima XPN-80 ultracentrifuge (Beckman Coulter, USA). At the end of the centrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... and sonicated for 10 seconds with a QSONICA Q500 sonicator equipped with a micro tip and with the amplitude set to 20% prior to analysis in a Cytomics FC500 flow cytometer (Beckman Coulter).
-
bioRxiv - Plant Biology 2023Quote: ... The cAW was collected by spinning at 700 x g for 20 min at 4 ⁰C (JA-14 rotor, Beckman Coulter; Avanti J-20TM centrifuge, Beckman Coulter). vAW was filtered through a single layer of Miracloth and was combined with the cAW ...
-
bioRxiv - Cell Biology 2023Quote: ... The cilia in the upper phase were sedimented by centrifugation (27,000 g, 4°C, 20 min; Beckman Coulter, Avanti JXN-26) and resuspended in Hepes-Magnesium-EGTA-Potassium (HMEK ...