Labshake search
Citations for Beckman :
1301 - 1350 of 2058 citations for 6 4 METHOXY PHENYL 3 METHYL IMIDAZO 2 1 B THIAZOLE 5 CARBALDEHYDE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Cell Biology 2024Quote: ... The samples were ultracentrifuged at 39,000 rpm at 4°C for 2.5 h in an SW41 rotor (Beckman Coulter, California, USA). Finally ...
-
bioRxiv - Cancer Biology 2024Quote: ... CRC cells were then cocultured at a 1:1 ratio with BMDCs for 4 hours and analyzed for uptake of CRC DNA by flow cytometry on the CytoFlex S cytometer (Beckman Coulter). Analysis was performed in FlowJo.
-
bioRxiv - Cell Biology 2024Quote: ... Samples were then spun at 100,000 xg for 16 h at 4°C using a TLS-55 swinging-bucket rotor and benchtop ultracentrifuge (Optima Max-XP, Beckman Coulter). Fractions were collected and loaded in SDS-PAGE for WB.
-
bioRxiv - Microbiology 2024Quote: ... Most of the supernatant was discarded leaving 12x∼200 µL of concentrated broken pieces of genomic fiber that were pooled and layered on top of ultracentrifuge tubes of 4 mL (polypropylene centrifuge tubes, Beckman Coulter) containing a discontinuous cesium chloride gradient (1.4 ...
-
bioRxiv - Immunology 2020Quote: ... and anti-CD27-PE-Cy5 (clone 1A4CD27; 2.5 μL; cat. # 6607107) and anti-NKG2A-APC (clone Z199; 5 μL; cat. # A60797) from Beckman Coulter (Supplementary Fig ...
-
bioRxiv - Biochemistry 2020Quote: ... The cultures were grown until OD600 of 0.8 at 37 °C and the cells were collected by centrifugation at 8,000 rpm for 5 minutes in JLA-16.25 rotor (Beckman Coulter), dissolved in 0.5 mL of HEPES:Polymix buffer ...
-
bioRxiv - Microbiology 2021Quote: ... liquid-captured bioaerosols (5 – 10 mL) were centrifuged for 10 minutes at 3000 × g (Allegra X-15R, Beckman Coulter) and resuspended in 200 μL of Middlebrook 7H9 medium supplemented with 100 μM DMN-tre ...
-
bioRxiv - Cell Biology 2021Quote: ... and the mixtures were ultracentrifuged at 80,000 rpm for 5 min at 30 °C using a TLA100 rotor and an Optima TLX ultracentrifuge (Beckman). The microtubule pellets were resuspended in PEM supplemented with 1 mM DTT ...
-
bioRxiv - Cell Biology 2020Quote: ... and 5 % solutions on top of each other in a 13.2 ml open-top polyallomer tube (331372, Beckman Coulter). The 1 ml concentrates were overlaid on top of the gradient ...
-
bioRxiv - Microbiology 2021Quote: ... Linear sucrose gradients were prepared by layering 1.8 ml each of sucrose solutions (wt/wt; prepared in 5 mM EDTA, pH 7.5) into 14-by 95-mm ultracentrifuge tubes (Beckman) in the following order ...
-
bioRxiv - Cancer Biology 2020Quote: ... equivalent amounts of ribosomes for each lysate was loaded onto each 10%-45% sucrose density gradient (BioComp Gradient Master machine) for ultracentrifugation at 33,000 rpm for 5 hours (Beckman Optima L80K Ultracentrifuge ...
-
bioRxiv - Microbiology 2022Quote: ... Cells were grown for additional 1 hour at 30 °C and the biomass was harvested by centrifugation (10,000 rpm, for 5 minutes, JLA-10.500 rotor (Beckman Coulter)).
-
bioRxiv - Biochemistry 2019Quote: ... The cell lysates were subjected to two rounds of centrifugation at 18000 rpm for 5 and 30 mins in a JA-25.50 rotor (Beckman). Bradford assay was used to normalize protein levels for co-immunoprecipitation and immunoblot analysis ...
-
bioRxiv - Genetics 2020Quote: ... 5 μL of each PCR reaction from the single worm lysate was pooled and purified by SPRI (Beckman Coutler) to remove unincorporated oligos ...
-
bioRxiv - Microbiology 2020Quote: ... The sample was vortexed for 10 s and incubated at room temperature for 5 minutes before centrifugation at 12,000 rpm (JA-15 1.5 rotor, Beckman Coulter) 4°C for 5 minutes ...
-
bioRxiv - Cell Biology 2022Quote: ... Resuspended pellets were then subjected to an iodixanol density gradient in 5-mL Ultra-Clear centrifuge tubes (Beckman Coulter). The tubes were first filled with a two-layer gradient ...
-
bioRxiv - Cell Biology 2022Quote: ... The stock solution of aggregate-depleted BSA (5% w/v) was prepared by overnight centrifugation at 100,000 x g (SW28 rotor Beckman Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... and 3.5 mL of 5% iodixanol in a 16.8 mL open top polyallomer tube (Beckman Coulter, Fullerton, California, USA). One milliliter of concentrated conditioned medium was pipetted on top of the gradient and samples were centrifuged for 18 h at 100,000 ×g and 4 °C using a SW 32.1 Ti rotor (Beckman Coulter ...
-
bioRxiv - Neuroscience 2023Quote: ... after which the cells were harvested by centrifugation at 4,000 rpm for 30 min at 5°C using the JLA 8.1000 rotor (Beckman Coulter). The harvested pellets were stored at −20°C until use ...
-
bioRxiv - Microbiology 2022Quote: ... the stained cells were detached by 5 mM of EDTA/PBS and analyzed with a CytoFLEX Flow Cytometer (Beckman). 10,000 events in a gated live cell population (based on SSC/FSC ...
-
bioRxiv - Plant Biology 2023Quote: ... Cell debris was removed by centrifugation at 1,300 g for 5 min (Beckman Centrifuge Avanti® J-26-XP). Afterwards ...
-
bioRxiv - Cancer Biology 2023Quote: ... Percentage of cells with each DNA content (2N, 3N, 4N, 5-8N) were estimated using CytExpert software (Beckman Coulter). For DNA content analysis using sorted cells ...
-
bioRxiv - Molecular Biology 2023Quote: ... Cell lysates were subjected to two rounds of centrifugation at 18000 rpm for 5 and 30 mins in a JA-25.50 rotor (Beckman). Protein levels were normalized for coimmunoprecipitation and immunoblot analysis using a Bradford Assay ...
-
bioRxiv - Microbiology 2024Quote: ... respectively) were gently layered on top of each other in ultracentrifuge tubes (Ultra-Clear 5 mL Tube, Beckman Coulter) and a continuous gradient was generated using a gradient maker (Gradient Master ...
-
bioRxiv - Microbiology 2024Quote: ... The phage was purified by isopycnic centrifugation in a CsCl discontinuous gradient for 5 h at 32,000 rpm in a SW41 rotor (Beckman) at 20°C ...
-
bioRxiv - Biochemistry 2023Quote: ... Colorimetric changes was measured 3 min after mixing the conditioned media with DTNB solution at 450 nm of absorbance (DTX880, Beckman Coulter, Indianapolis, IN, USA). The value from DTNB only was substracted as noise ...
-
bioRxiv - Microbiology 2019Quote: ... Gradients were then spun at 38,000 RPM for 2 h in a SW41Ti rotor (Beckman Coulter; 331362) at 4°C ...
-
bioRxiv - Pathology 2021Quote: ... BALF (10 μl) was applied to glass microscopy slides using a cytocentrifuge (StatSpin CytoFuge 2, Beckman Coulter). Slides were fixed with 10% neutral buffered formalin ...
-
bioRxiv - Microbiology 2022Quote: ... 2 ng of each product were pooled for subsequent cleanup using the AmpureXP PCR cleanup protocol (Beckman). The pooled library was quantified by a picogreen assay and loaded onto an Illumina MiSeq Reagent Kit v3 (600-cycle ...
-
bioRxiv - Cell Biology 2022Quote: ... The supernatant was ultracentrifuged for 2 h at 150,000 x g in an Optima XP centrifuge (Beckman) with a MLA-50 rotor ...
-
bioRxiv - Microbiology 2022Quote: ... cells were resuspended in 2% FBS-PBS and analyzed by a CytoFLEX flow cytometer (Beckman Coulter, USA). The final results from three independent experiments were averaged and shown in the histogram.
-
bioRxiv - Molecular Biology 2023Quote: ... Reactions were incubated for 2 hr at 60°C and purified by Ampure XP beads (Beckman #A63881). Libraries were PCR amplified in a 30 µL reaction containing 14 µL circularized library ...
-
bioRxiv - Molecular Biology 2023Quote: ... Reactions were incubated for 2 hr at 60°C and purified by Ampure XP beads (Beckman #A63881). Libraries were PCR amplified in a 30 µL reaction containing 14 µL circularized library ...
-
bioRxiv - Biochemistry 2023Quote: ... The cell culture microplate was centrifuged at 300g for 2 min (Beckman Coulter Allegra X-22R Centrifuge) to bring the cells to the well bottom ...
-
bioRxiv - Cancer Biology 2024Quote: ... Cells were then resuspended in PBS + 2% FBS and acquired on a Gallios flow cytometer (Beckman Coulter).
-
bioRxiv - Cancer Biology 2022Quote: ... was removed using right-side size selection with AMPure XP beads at a 1:1 and 7:1 bead:sample ratio (Beckman Coulter) described previously26 ...
-
bioRxiv - Molecular Biology 2023Quote: ... and purified using 1:1 (vol: vol) AMPure XL beads (Beckman Coulter). cDNA prepared as above was end-prepped using NEBNext Companion Module for Oxford Nanopore Technologies Ligation Sequencing (NEB ...
-
bioRxiv - Systems Biology 2024Quote: ... After cleanup with AMPure XP Reagent (Beckman Coulter, 1:1 ratio beads:PCR), iPCR amplification was carried out with KAPA HiFi HotStart ReadyMix (Roche) ...
-
bioRxiv - Biophysics 2021Quote: ... which were centrifuged at 3000 rpm for 15 minutes at 4°C using a fixed angle centrifuge (Beckman Coulter, Brea, CA, USA). After removal of excess supernatant ...
-
bioRxiv - Cancer Biology 2021Quote: Proliferation of IL-32 KO and WT mock cells was assessed by cell counting every day for 4 days using cell coulter (Beckman Coulter Diagnostics). Cell viability was assessed by Trypan blue staining or by annexin/PI flow cytometry and analyzed by FACS Diva software (BD Biosciences).
-
bioRxiv - Biophysics 2022Quote: ... The tubes were filled with PBS to reach the final volume and samples were ultracentrifuged at 120,000 g for 60 minutes at 4°C (70.1 Ti rotor, k-factor 36, Beckman Coulter, Brea, CA, USA). Finally ...
-
bioRxiv - Molecular Biology 2019Quote: ... was clarified by centrifugation at 10,000 rpm for 30 min at 4 °C using an SW-28 rotor in an Optima L-90K Ultracentrifuge (Beckman Coulter, USA) and was then ultracentrifuged at 25,000 rpm for 6 h at 4 °C using the same rotor ...
-
bioRxiv - Molecular Biology 2019Quote: ... The DG was centrifuged 18 h at 100,000 g and 4 °C using SW 32.1 Ti rotor (Beckman Coulter, Fullerton, California, USA). Density fractions of 1 ml were collected and fractions 9-10 pooled ...
-
bioRxiv - Plant Biology 2020Quote: ... All samples were centrifuged in a single 2 h run with sedimentation at 50,000 g and 4°C using small 13 x 51 mm ultracentrifugation tubes in SW55 Ti rotor (Beckman Coulter, Krefeld, Germany). These centrifugation settings were optimized for polysome and monosome separations ...
-
bioRxiv - Cell Biology 2020Quote: ... Vacuoles were separated from free dye by centrifugation (100,000 x g, 25 min, 4°C, SW-60 Ti rotor, Beckman L8-80M Ultracentrifuge) and recovered from the 0%-4% interface ...
-
bioRxiv - Biophysics 2021Quote: ... then the supernatant was ultracentrifuged at 100000×g for 20 min at 4 °C using an Optima L-100K ultracentrifuge (Beckman Coulter, USA) equipped with a SW 40 Ti swinging bucket rotor ...
-
bioRxiv - Plant Biology 2021Quote: ... The resulting slurry was centrifuged for 15 min at 9000 rpm at 4 °C using a JA14 rotor (Beckman Coulter, Brea, CA). The supernatant was filtered with a Miracloth and kept on ice ...
-
bioRxiv - Biochemistry 2021Quote: ... Lentivirus from the cell supernatant was collected 24h later by ultracentrifugation with a Sw28 rotor (Beckman Coulter; 22,000 rpm, 2h, 4°C). Finally ...
-
bioRxiv - Bioengineering 2021Quote: ... The resulting supernatant was then ultracentrifuged at 50,000 RPM and 4 °C for 90 minutes using a 70.1 Ti rotor (Beckman Coulter, Brea, CA, USA) with 1 mL 15% sucrose cushion per tube ...
-
bioRxiv - Cell Biology 2021Quote: ... The samples were centrifuged at 60,000 rpm at 4°C for 2hr in an SW65 Ti ultracentrifuge rotor (Beckman Coulter, California, USA). The translucent polysome pellets were washed by gently dispensing and removing 500 µl of ice-cold RNase-free water ...