Labshake search
Citations for Beckman :
1301 - 1350 of 1459 citations for 4 Amino 3 8 dichloro 5 methoxyquinoline since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Molecular Biology 2024Quote: ... ADEV isolation was performed by ultracentrifugation at 100,000 × g for 14 h at 4 °C (swing bucket rotor on minimum acceleration/break setting, SW 32Ti Beckman Coulter, Brea, CA), and ADEVs were resuspended in 200μL PBS and stored at −20°C until used16,41 ...
-
bioRxiv - Cell Biology 2023Quote: ... Following centrifugation at 131,300 × g for 24 hr at 4 °C using a MLS-50 Swinging-Bucket rotor (Beckman Coulter, Brea, CA) to sediment protein complexes ...
-
bioRxiv - Cell Biology 2024Quote: ... All centrifugation steps were done at 4°C and the last two steps were performed using Optima XE-90 ultracentrifuge (Beckman Coulter, A94471) with rotor SW32Ti (Beckman Coulter ...
-
bioRxiv - Microbiology 2023Quote: ... The lysate was clarified by centrifugation at 5500 rpm for 20 min at 4°C (AllegraTM 21R Centrifuge, Beckman Coulter, CA, USA). The sample was then loaded into a HisTrap HP 5 mL column (Cytiva ...
-
bioRxiv - Neuroscience 2023Quote: ... then spun at 100,000 x g for 30 min at 4°C in an ultracentrifuge (Beckman OPTIMA TLX with TLA-100.3 rotor). The supernatant was saved and the pellet went through a series of similar extractions using High-Salt Triton Buffer (High-Salt Buffer ...
-
bioRxiv - Neuroscience 2023Quote: ... The supernatants were then combined and centrifuged at 17,000g for 10min at 4°C in a Beckman SW41-Ti rotor (Beckman Coulter, Brea, CA). The supernatant was saved as the cytosolic (CYT ...
-
bioRxiv - Cell Biology 2023Quote: ... cells were blocked in 2% human serum and PBS for 30 min at 4°C and stained with DC-SIGN (Beckman Coulter #A07407), CD80 (BioLegend #305214) ...
-
bioRxiv - Cell Biology 2023Quote: Myf5High and Myf5Low MuSCs were isolated from a pool of 4 male and 4 female mice and repeated in two independent experiments and total RNA was extracted using Agencourt RNAdvance tissue Kit (Beckman Coulter, #A32646) with a quality score of RQN 9.3 to 10 ...
-
bioRxiv - Cell Biology 2023Quote: ... was next subjected to ultracentrifugation at 120,000 × g for 4 h in a SW 28 Ti Swinging-Bucket Rotor (Beckman Coulter, Fullerton, CA) to sediment small EVs ...
-
bioRxiv - Plant Biology 2023Quote: ... 700 μl of obtained extract was applied to a chilled sucrose density gradient and centrifuged at 4 °C for 2 hours 45 minutes at 151,000 ×g using the SW 41 Ti rotor (Beckman Culture Life Sciences). After centrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... Triton-X was added to the lysate to a final concentration of 0.1% and clarified by spinning at 15,000 RCF at 4°C for 45 minutes (Beckman Coulter JA-20 rotor). The supernatant was loaded onto a 5 mL HisTrap™ FF crude column (GE Healthcare ...
-
bioRxiv - Cell Biology 2023Quote: ... the supernatants were transferred into SW60 tubes (in vivo studies 1–4) or SW40 tubes (donated patients) (Beckman Coulter Inc., Brea, USA) and centrifuged at 10,000xg for 35 minutes ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysates were loaded onto the sucrose gradients and centrifuged at 40’000 rpm for 2 h at 4°C using the SW 41 Ti rotor (Beckman Coulter, Cat# 331362). Subsequently ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were centrifuged at 100,000 × g for 2 hr at 4 °C (Type 50.2 Ti Fixed angle ultracentrifuge rotor, Beckman Coulter, Brea, CA, USA). The supernatants were aspirated ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were incubated further overnight at 20°C and subsequently harvested by centrifugation (Beckman rotor 8.1000, 5000 rpm, 15 min, 4°C). The pellet was resuspended in PBS ...
-
bioRxiv - Biochemistry 2023Quote: ... by centrifugation at 80,000 × g for 30 min at 4°C using a TLS-55 rotor (Beckman Coulter Inc., Miami, FL, USA). Crista membranes were identified and removed based on fluorescence under a UV lamp ...
-
bioRxiv - Developmental Biology 2024Quote: ... for 30 min at 4°C in the dark followed by flow cytometry analysis on a CytoFlex 26 (Beckman Coulter, Indianapolis, IN) in PE-A and PerCP-A channels ...
-
bioRxiv - Neuroscience 2024Quote: ... The supernatant was segregated subsequent to centrifuging the brain tissue homogenate for 1 h at 100,000g and 4°C utilising an ultra-high-speed centrifuge (Beckman, Optima MAX-XP). The tissue residue was then reprocessed ...
-
bioRxiv - Biophysics 2024Quote: ... Samples were centrifuged at 24,000 rotations per minute using an S-28 rotor at 4◦C in an Optima XL-100K Ultracentrifuge (Beckman Coulter, Brea, CA). The supernatant was decanted ...
-
bioRxiv - Molecular Biology 2024Quote: ... was loaded on top of the gradient and spun at 4°C for 18 hr at 30,000 rpm (Beckman, Rotor SW-41Ti). Samples were fractionated with absorbance optics (λ = 260 nm ...
-
bioRxiv - Biophysics 2020Quote: ... lysate was centrifuged at 5 °C with 13000 rpm for 15 min by Avanti J-E Ultra Centrifuge (Beckman Coulter). Supernatant from centrifugation was filtered with 0.45 μm SFCA syringe filters (Sigma Aldrich ...
-
bioRxiv - Molecular Biology 2020Quote: ... Four mL of each density (3.5 mL for the 5% density) was stacked into an open polyallomer tube (337986, Beckman Coulter) using a Tecan freedom EVO ...
-
bioRxiv - Biophysics 2022Quote: ... The cell suspension was centrifuged for 5 min at 2000 g (Centrifuge Beckman Coulter Allegra X-15-R, Rotor Sx4750A)) and 4°C ...
-
bioRxiv - Cell Biology 2020Quote: ... 5 × 105 additional cells were immediately processed for far red signal analysis by flow cytometry (Gallios, Beckman Coulter, Brea, USA) (D0) ...
-
bioRxiv - Genomics 2019Quote: ... DNA samples were loaded onto 5-20% sucrose gradients and fractionated according to size by centrifugation (SW-40Ti rotor; Beckman Coulter Optima L-100 XP ...
-
bioRxiv - Microbiology 2019Quote: ... Then 0.8 mL of Cold 60% sucrose buffer A was added to RNAse-free 5 mL Ultraclean tubes for ultracentrifugation in a SW55Ti (Beckman). The ribosome-containing supernatant was used to fill these tubes and an ultracentrifugation step was performed for 16 hs at 150.000g ...
-
bioRxiv - Microbiology 2020Quote: ... for 5 minutes using a FIBERLite F10BCI-6×500y rotor (Piramoon Technologies) in an Avanti JXN-30 centrifuge (Beckman Coulter). The clarified cell lysate was further centrifuged in a JS-24.38 rotor (Beckman Coulter ...
-
bioRxiv - Microbiology 2020Quote: ... the 96-well plate was centrifuged at 1,000 RPM for 5 min using an Allegra 25R model centrifuge (Beckman Coulter) with inserts for 96-well plates ...
-
bioRxiv - Microbiology 2020Quote: ... At the end of each selection cells were pelleted from the media by centrifugation 200 x g for 5 min in an Allegra centrifuge (Beckman) and supernatant was transferred for storage at −80C ...
-
bioRxiv - Microbiology 2022Quote: ... and layered onto a preformed 11 mL 5% to 15% (wt/vol) Ficoll gradient in a 13.2 mL thin-wall polyallomer ultracentrifuge tube (Beckman Coulter). Gradients were centrifuged at 12,000 rpm for 2 h at 4°C in an SW41 Ti swinging-bucket rotor in a Sorvall Discovery SE ultracentrifuge ...
-
bioRxiv - Immunology 2022Quote: ... 1.5 μl of PI was also added and samples were run on the Gallios™ Flow Cytometer (Beckman Coulter, Inc). Data was analysed offline using Kaluza® Flow Analysis software version 2.1a (Beckman Coulter Inc. ...
-
bioRxiv - Immunology 2021Quote: ... subsequently overlaid onto 5 mL of 20% sucrose and ultracentrifuged at 24,000 rpm for 2.5 hrs (Beckman XPN80, SW32.Ti). The viral pellet was resuspended in PBS.
-
bioRxiv - Physiology 2019Quote: ... Agencourt AMPure XP PCR purification kit (5 ml Beckman Coulter Part No. A63880; 60 ml Beckman Coulter Part No. A63881) was used ...
-
Proteome of the secondary plastid of Euglena gracilis reveals metabolic quirks and colourful historybioRxiv - Evolutionary Biology 2019Quote: ... The DNase-treated lysate (5 ml) was loaded on top of a sucrose discontinuous density gradient in ultracentrifuge tubes (Cat. No. 344058, Beckman). The gradient was prepared by layering decreasingly dense sucrose solutions upon one another from 2.0 ...
-
bioRxiv - Microbiology 2021Quote: ... bacterial cells were washed in PBS and diluted 1:5 before acquisition on a CytoFLEX benchtop flow cytometer (Beckman Coulter). For each sample ...
-
bioRxiv - Molecular Biology 2022Quote: ... Concentrated chromatin samples were loaded on 11 mL gradients of 5-25% sucrose in TE buffer and centrifuged in a preparative ultracentrifuge with a SW41 Ti rotor (Beckman) for 11 hrs ...
-
bioRxiv - Cell Biology 2022Quote: ... Cells were centrifuged at 1500 g for 5 min in an F2402 rotor in a GS15R table-top centrifuge (Beckman) and resuspend with water to wash the cells ...
-
bioRxiv - Microbiology 2023Quote: Human bladder cell line PD07i was cultured at 37°C with 5% CO2 to confluency as previously described and counted using a Coulter Counter (Beckman) to a minimum of 1×105 cells/mL ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysates were then loaded onto a 5-50% sucrose density gradient and centrifuged in an SW41 Ti rotor (Beckman) at 36,000 rpm for 2 h at 4 °C ...
-
bioRxiv - Microbiology 2023Quote: ... Sample analysis was performed by mixing 5 µl of fluorescent vesicles with 20 µl of Flow-Count Fluorospheres (Beckman Coulter) in a final volume of 200 µl of PBS to determine absolute counts ...
-
bioRxiv - Genetics 2023Quote: ... Libraries were amplified using 5-7 cycles of PCR using KAPA HiFi DNA polymerase and purified with 1.1X SPRI (Beckman Coulter). Nucleosome profiles were manually inspected using a Tapestation with the D1000 Screen Tape system (Agilent) ...
-
bioRxiv - Cell Biology 2023Quote: ... 5 mM Mg(OAc)2) and centrifuged for 20 min at 100,000 x g in a 70Ti rotor (Beckman Coulter). The resulting membrane pellet was resuspended in 1 ml rough microsome (RM ...
-
bioRxiv - Biophysics 2023Quote: ... Each 300μl dialysate was mixed with 300μl of 80% (w/v) Nycodenz dissolved in reconstitution buffer and then divided equally into two 5 x 41 mm ultracentrifuge tubes (Beckman). Then ...
-
bioRxiv - Molecular Biology 2023Quote: ... Lysed cells were centrifuged and the viscous supernatant was immediately loaded on a 5-24% (w/v) sucrose density gradient and centrifuged in SW 32 Ti rotor (Beckman) overnight ...
-
bioRxiv - Microbiology 2020Quote: ... by ultra-centrifugation in a Beckman L7-65 ultracentrifuge at 25,000 rpm for two hours at 4°C using a Beckman SW28 rotor (Beckman Coulter, Brea, CA, USA). Supernatants were aspirated off and the pellets were re-suspended in PBS (pH 7.4) ...
-
bioRxiv - Microbiology 2020Quote: ... by centrifugation in a Beckman L7-65 ultracentrifuge at 25,000 rpm for 2h at 4°C using a Beckman SW28 rotor (Beckman Coulter, Brea, CA, USA). Supernatants were aspirated and the pellets were re-suspended in PBS (pH 7.4) ...
-
bioRxiv - Molecular Biology 2021Quote: ... The centrifugation is performed on a SW60Ti rotor at 40 000 g for 22 minutes at 4°C (Beckman Optima L-90K Ultracentrifuge). The mitochondrial fraction (400µL ...
-
bioRxiv - Molecular Biology 2020Quote: ... and plasma was separated by centrifugation (2,000 × g, 20 min, 4 °C) in a Microfuge 20R (cat. no. B30149, Beckman Coulter, Brea, CA, USA). Plasma was transferred to new 1.5 mL microcentrifuge tubes and further clarified by centrifugation (10,000 × g ...
-
bioRxiv - Biophysics 2022Quote: ... shortly sonified and centrifuged for 30 min at 100 000 g at 4°C (Centrifuge Beckman Coulter Optima XPN-80, Rotor type 70.1).) ...
-
bioRxiv - Biophysics 2022Quote: ... The samples were centrifuged for 30 min at 100 000 g at 4°C (Centrifuge Beckman Coulter Optima XPN-80, Rotor type 70.1). The supernatant ...