Labshake search
Citations for Beckman :
1201 - 1250 of 1698 citations for 7 TRIFLUOROMETHYL 2 3 4 5 TETRAHYDRO 1H BENZO B AZEPINE HYDROCHLORIDE since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biophysics 2023Quote: ... The lysate was clarified by centrifugation at 40,000 rpm for 35 min at 4°C (Type 45 Ti Rotor, Beckman Coulter). The resulting supernatant was mixed with 1ml pre-washed IgG Sepharose 6 FastFlow beads (Cytiva ...
-
bioRxiv - Microbiology 2023Quote: ... Media was cleared from EVs by ultracentrifugation at 100,000×g for 18 h at 4 °C in a LE-80 ultracentrifuge (Beckman Coulter) with a 60Ti rotor ...
-
bioRxiv - Biophysics 2023Quote: ... Centrifugation was performed at 154,300 × g for 24 h at 4◦C (SW 41 Ti swinging-bucket rotor, Beckman Coulter). The separated bands were collected dropwise from the bottom of the tube ...
-
bioRxiv - Biochemistry 2024Quote: ... The homogenate was clarified by centrifugation for 30 min at 70,560 × g at 4°C in an Optima XPN Ultracentrifuge (Beckman Coulter) using a Ti-45 rotor ...
-
bioRxiv - Cell Biology 2024Quote: ... The samples were then centrifuged for 1 h at 100,000 g and 4°C in a TLS 55 rotor (Beckman-Coulter) with the appropriate adapters (#358614) ...
-
bioRxiv - Plant Biology 2024Quote: ... and centrifuged at 10,000 x g for 30 min at 4°C using a TLA100.3 fixed angle rotor and an Optima TLX Ultracentrifuge (Beckman Coulter).
-
bioRxiv - Microbiology 2024Quote: ... sucrose gradients prepared with buffer C and centrifuged for 16 h at 71,935 g at 4 °C in a SW28 rotor (Beckman Coulter). Gradients were fractionated on a Biocomp Piston Gradient Fractionator (BioComp Instruments ...
-
bioRxiv - Microbiology 2024Quote: ... 20 mL of supernatant was gently layered on top of 10mL of 20% sucrose dissolved in PBS (4°C, sterile filtered) in an ultra-clear 1×3.5′ centrifuge tube (Beckman 344058). The tubes were spun down in a SW28 rotor (Beckman ...
-
bioRxiv - Molecular Biology 2024Quote: ... and EVs were pelleted by ultracentrifugation for 60 minutes at 100,000 x g at 4 ° C in an SW40.Ti rotor (Beckman Coulter). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation at 4℃ at 184,000 x (g) in a 70Ti rotor for 50 minutes (Beckman Coulter). After affinity chromatography with StrepTactin SuperFlow resin (IBA) ...
-
bioRxiv - Biochemistry 2024Quote: ... A crude ribosome pellet was obtained by centrifugation for 2h at 200,000 × g at 4 °C (70Ti rotor, Beckman Coulter) and solubilized in HMA6/30 for 16h at 4°C ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... EVs were purified from concentrated HES by ultracentrifugation at 100,000 x g for 90 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Evolutionary Biology 2024Quote: ... and pelleted each time by ultracentrifugation at 100,000 x g for 70 mins at 4 °C in polyallomer tubes (Beckman Coulter) in a SW40 rotor (Beckman Coulter) ...
-
bioRxiv - Biochemistry 2024Quote: ... Lysates were clarified by ultracentrifugation for 35 minutes at 4℃ at 70,000 x (g) in a 45Ti rotor (Beckman Coulter). Constructs containing N-terminal TOG domains (TOG1 ...
-
An anti-amyloidogenic treatment to specifically block the consolidation of traumatic events in mousebioRxiv - Animal Behavior and Cognition 2020Quote: ... the rest of the volume was centrifuged for 5 minutes at 4,000 rpm (Microfugue 18 centrifuge, Beckman Coulter) to obtain the cell debris fraction (P1 ...
-
bioRxiv - Biochemistry 2021Quote: ... The labeled peptides were further purified by C-18 (5 μm, 4.6 mm × 150 mm, Beckman Coulter Inc.) reverse phase-high performance liquid chromatography ...
-
bioRxiv - Biochemistry 2020Quote: ... After 20 minutes the cells were collected by centrifugation (8,000 rpm, 5 minutes, JLA-16.25 Beckman Coulter rotor), dissolved in 0.5 mL of HEPES:Polymix buffer (5 mM Mg(OAc)2 ...
-
bioRxiv - Genetics 2021Quote: ... Reactions were then pooled in a 5 ml tube and purified using a 0.7x SPRIselect (Beckman Coulter B23318) cleanup and eluted in 450μL of TE ...
-
bioRxiv - Evolutionary Biology 2020Quote: ... and washed in 5 volumes of chloroplast wash buffer (8 °C, manual stop when reaching 3000 RPM, Beckman JA-20 ...
-
bioRxiv - Molecular Biology 2023Quote: ... Dialyzed nucleosomes were purified in a 5-30% w/v sucrose gradient with a SW41 Ti (Beckman Coulter) rotor in an Optima L-90K ultracentrifuge (Beckman Coulter ...
-
bioRxiv - Cell Biology 2024Quote: ... 600 µL of the lysate were transferred to an ultracentrifuge tube (5 x 41 mm, Beckman-Coulter, #344090) and centrifuged in an MLS-50 rotor (Beckman-Coulter ...
-
bioRxiv - Cell Biology 2022Quote: ... The product from PCR-2 was purified using 1x volume of AMPure XP beads (Beckman Coulter) and eluted in 15 μL of IDTE buffer (IDT DNA) ...
-
bioRxiv - Bioengineering 2021Quote: ... The supernatant was then ultracentrifuged for 2 hours using Optima™ L-80XP Ultracentrifuge (Beckman Coulter) at 100,000 x g at 4°C ...
-
bioRxiv - Molecular Biology 2020Quote: ... The solution was centrifuged at 36,000 rpm for 2 h in a SW41Ti rotor (Beckman Coulter) at 4°C ...
-
bioRxiv - Genetics 2021Quote: ... We purified the final libraries with 2 rounds of 0.8X volume of SPRISelect (Beckman Coulter, B23318).
-
bioRxiv - Immunology 2020Quote: ... were incubated with 1-2 million 1D8 cells following standard FACS protocol and analyzed by Beckman.
-
bioRxiv - Microbiology 2021Quote: ... and centrifuged for 2 h at 64,000 g in A27-8×50 mL rotors (Beckman Coulter) to sediment virus particles ...
-
Dynamic states of eIF6 and SDS variants modulate interactions with uL14 of the 60S ribosomal subunitbioRxiv - Biochemistry 2022Quote: ... Gradients were centrifuged at 35,000 rpm for 2 hrs 40 min using a SW41Ti rotor (Beckman). Gradients were fractionated using a Brandel (UV ...
-
bioRxiv - Microbiology 2023Quote: ... Three 1:2 serial dilutions were done suing a Biomek i7 liquid handler (Beckman Coulter, USA), in order to obtain the four working concentrations ...
-
bioRxiv - Cell Biology 2022Quote: ... Equal volume (2 ml i.e 1600 µg) of cell extracts were loaded in ultracentrifuge tubes (Beckman). Samples were ultracentrifuged at 100,000 g for 30 minutes at 4°C in a Optima XPN-100 ultracentrifuge (Beckman) ...
-
bioRxiv - Bioengineering 2023Quote: ... in 2%BSA and 2mM EDTA and sorted using FACS sorter (Beckman Coulter, MoFlo Astrios Zellsortierer). For gating ...
-
bioRxiv - Microbiology 2023Quote: ... resuspended in 2% BSB-PFA and analysed by Flow Cytometry on BD Celesta instrument (Beckman Coulter) using FlowJoTM software ...
-
bioRxiv - Immunology 2023Quote: Cells were washed with 2% FACs and data was acquired using CytoFLEX S (Beckman Coulter, USA) and analyzed via FlowJo v10 software (Oregon ...
-
bioRxiv - Biophysics 2022Quote: ... The fractions containing monomeric peptide were pooled and centrifuged at 386000 g for 3 h in an Optima TLX ultracentrifuge equipped with a TLA 120.1 rotor (Beckman Coulter, Atlanta, GA, USA). Orthophosphoric acid or sodium phosphate were added to a final concentration of 20 mM to adjust the pH to 2.8 or 7.4 ...
-
bioRxiv - Biochemistry 2021Quote: The absorbance spectra of recombinant DosS and DosT (3 µM) were determined at room temperature using quartz cuvettes with rubber stoppers in a DU800 spectrophotometer (Beckman Coulter, Fullerton, CA). The reduction of recombinant DosS was achieved via addition of sodium dithionite (DTH ...
-
bioRxiv - Microbiology 2022Quote: ... induced by doxycycline (DOX) at 3 μg/ml and sorted for high GFP-expressing cells by MoFLO Astrios EQs (Beckman Coulter Life Sciences) using 488 nm lasers ...
-
bioRxiv - Bioengineering 2023Quote: ... the supernatant was then taken and loaded into a 10% to 45% sucrose gradient solution and centrifuged at 360000 rpm for 3 h (Beckman Optima XE-100). 18 fractions from each sample were collected using a piston gradient fractionator (Biocomp ...
-
bioRxiv - Microbiology 2024Quote: ... reinhardtii cell density and size were determined using a hemocytometer and ImageJ or a Beckman Coulter Multisizer 3 with a 50 μm orifice (Beckman Coulter, CA, USA). Bacterial cell density was determined by counting colony forming units (CFU ...
-
bioRxiv - Plant Biology 2021Quote: ... the samples were centrifuged at 35 000 RPM for 18 hours at 4°C in a 70Ti rotor and L8-M ultracentrifuge (Beckman Coulter). The ribosome pellets were then gently washed with RNase-free water and resuspended in 300 μl of resuspension buffer (100 mM Tris·HCl (pH 8.0) ...
-
bioRxiv - Cell Biology 2019Quote: ... by ultracentrifugation at 150,000 × g for 12 h at 4°C using an Optima L-100XP centrifuge equipped with a SW55Ti rotor (Beckman Coulter). Eleven fractions were collected from the top of the sucrose gradient.
-
bioRxiv - Molecular Biology 2021Quote: ... The gradient was ultracentrifuged at 55,000 rpm for 55 min at 4 °C with max acceleration and slow deceleration using an Optima LE-80K Ultracentrifuge and SW55Ti rotor (Beckman Coulter). The sucrose gradient was fractionated according to the number of associated ribosomes as determined by the profile of the absorbance at 254 nm using a Density Gradient Fractionation System (Brandel ...
-
bioRxiv - Neuroscience 2021Quote: ... This was incubated for 1 hour at room temperature while rotating before centrifugation at 100,000 x g for 90 minutes at 4°C using the Optima™ MAX-XP Ultracentrifuge (Beckman Coulter). The supernatant was then collected (sarkosyl-soluble fraction) ...
-
bioRxiv - Molecular Biology 2021Quote: ... pombe cells were pelleted down for 10 min at 5000 rpm at 4°C (Rotor: F10-6X500, FiberLite Beckman J2-MC). The pellet was washed with buffer 1 (HEPES- 20 mM ...
-
bioRxiv - Bioengineering 2022Quote: ... The 60-70 mL were then divided equally into two 50-mL centrifuge tubes and spun down outside the anaerobic chamber at 4 °C and 3500 rpm for 10 min using an Allegra 64R ultracentrifuge (Beckman Coulter). Next ...
-
bioRxiv - Bioengineering 2022Quote: ... Each 250 mL culture was divided equally into six 50-mL centrifuge tubes and spun down at 4 °C and 3500 rpm for 10 min using an Allegra 64R centrifuge (Beckman Coulter). The supernatant was discarded and 6 mL of ice-cold 10% glycerol was used to wash and combine the six cell pellets into one suspension ...
-
bioRxiv - Genomics 2020Quote: ... Lentiviral supernatant was collected at 48 and 72hrs post-transfection and subsequently concentrated by ultracentrifugation (24,000 rpm, 4°C, 2hrs) (Beckman Coulter SW32).
-
bioRxiv - Biophysics 2019Quote: AUC-SV analyses were performed in XL-A analytical ultracentrifuge equipped with a 4-hole An-60 Ti rotor and 12-mm double-sector charcoal-filled epon centerpieces (Beckman Coulter). Sedimentation velocity measurements using absorbance optics of reference buffer and samples in 20 mM Tris-HCl (pH 8.0) ...
-
bioRxiv - Molecular Biology 2019Quote: ... The cleared supernatant was layered over 15-40% sucrose gradients in disassociation buffer and spun 28000 rpm for 16 hours at 4°C in a SW-32 rotor (Beckman-Coulter). Gradients were fractionated with an ISCO fractionation system and 30S + 50S peaks were combined ...
-
bioRxiv - Genetics 2020Quote: ... The homogenates were incubated on ice for 15–20 min and then centrifuged at 3000xg for 10 min at 4°C in a GPR Data Settop centrifuge (Beckman, Inc.). The supernatant solutions were centrifuged at 15,800xg for 15 min at 4°C in a microcentrifuge (Model 5042 ...
-
bioRxiv - Plant Biology 2020Quote: ... The loaded density gradients were centrifuged at 33,000 g for 14.5 h at 4°C using a six-position SW41 Ti rotor (Beckman Coulter, Kerfeld, Germany). The positions of ribosome complexes varied slightly with each centrifugation run that comprised a set of six samples ...