Labshake search
Citations for Beckman :
1151 - 1200 of 1234 citations for Crimean Congo Haemorrhagic Fever virus CCHFV glycoprotein C Gc sheep Fc tag since 2019
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Biochemistry 2021Quote: ... supernatants were collected and centrifuged with 150.000 x g (at rav) for 30 min at 4 °C using an Optima™ MAX-XP Ultracentrifuge (Beckman Coulter; TLA120.2 rotor). Pellets were resuspended in PBS and 4 µg of primary antibody were added for 30 min ...
-
bioRxiv - Genomics 2021Quote: ... The spores were washed twice with sterile ddH2O and pelleted at 3700g for 5 min at 4 °C in an Allegra X-12R centrifuge (Beckman, Brea, CA, USA). Spores were resuspended in sterile ddH2O and kept at 4°C until experiments.
-
bioRxiv - Biochemistry 2020Quote: ... The sample was centrifuged at 4°C for 1 hour and 40 minutes at 182,753 x g (38,000 rpm in a Beckman Coulter Type 42.2 Ti rotor).
-
bioRxiv - Neuroscience 2021Quote: ... The resulting lysates were centrifuged at 100,000Xg for 30-60 min at 4°C in an Optima TLX tabletop ultracentrifuge using a TLA-110 rotor (Beckman Coulter, Fullerton, CA). The clarified supernatants were removed and transferred into the new tubes ...
-
bioRxiv - Biochemistry 2020Quote: ... Unbroken cells were pelleted by centrifugation at 18,000 RCF for 30 min at 4°C (Beckman centrifuge J-20-XP, Rotor JA16.250, DE). The supernatant was transferred to 45 TI rotor (Beckman ...
-
bioRxiv - Biophysics 2021Quote: ... Cells were induced with IPTG and grown overnight at 37 °C and harvested by centrifugation in a Beckman Avanti J25 centrifuge with a JA-20 rotor at 5000 rpm (Beckman Coulter, Fullerton, CA). The cell pellet was resuspended in 10 mM Tris ...
-
bioRxiv - Biophysics 2020Quote: ... 150 μl of the sample was ultracentrifuged at 22°C and 205000 × g for 19 min (TLA 100.3, Beckman Coulter Inc., Fullerton, California). The experiments were performed in HEPES buffer ...
-
bioRxiv - Cancer Biology 2019Quote: ... A quantity of 10 μl of lentiviral particles was added to the appropriate wells and the cells and lentiviral particles containing plates were immediately centrifuged at 32°C for 90 minutes at 2500 rpm speed in a centrifuge (Beckman Allegra X-12R). After spinoculation ...
-
bioRxiv - Bioengineering 2021Quote: ... The samples were then centrifuged at 12,000 g for five minutes at 4°C to remove tissue debris with a Microfuge™ 22R centrifuge (Beckman Coulter, Brea, CA). The RNA was extracted using the Invitrogen PureLink™ RNA Mini Kit (Thermo Fisher ...
-
bioRxiv - Bioengineering 2021Quote: ... The tubes were then centrifuged at 1000 g for 15 minutes at 4°C using a Microfuge™ 22R (Beckman Coulter, Brea, CA), and the serum was then stored at -80°C ...
-
bioRxiv - Microbiology 2021Quote: ... and extracellular vesicles including exosomes and virions were pelleted by ultracentrifugation at 141,000 g at 4 °C for 2 h in a swinging-bucket rotor (SW28; Beckman Coulter, Brea, CA, USA). The pellet was resuspended in filtered PBS and centrifuged at 18,300 g and 4°C for 10 min to remove insoluble aggregates ...
-
bioRxiv - Molecular Biology 2021Quote: ... 1 mM ATP and 1 mM PMSF) and centrifuged for 15 h at 4°C and 74 400 x g (Beckman SW 32.1 Ti). From the gradient ...
-
bioRxiv - Microbiology 2021Quote: ... resuspended in 150 μl 0.1 M HEPES/NAOH pH 7.0 and purified for 48 h (250,000 × g, 4 °C; Beckman Optima LE-80K, rotor SW60-Ti) using a CsCl gradient (0.45 g/ml ...
-
bioRxiv - Molecular Biology 2020Quote: ... and centrifuged at 10,000xg for 30 minutes at 4°C in a Beckman Coulter Optima XE-100 (fitted with a SW41Ti Rotor (Beckman Coulter, CA USA)) ...
-
bioRxiv - Microbiology 2019Quote: ... and the remaining 32 mL were centrifuged at 500 × g for 3 min at 4°C (Allegra X-15R, Beckman Coulter, Villepinte, France) to spin down the remaining meat fibers and debris ...
-
bioRxiv - Biophysics 2022Quote: ... Fractions of EV-specific density were then pooled together and subsequently concentrated via ultracentrifugation (100,000 × g, 4 h, 4 °C) through a 20% w/v sucrose cushion in a SW41 rotor (Beckman Coulter, Fullerton, CA, USA). The resulting supernatant was discarded ...
-
bioRxiv - Biophysics 2022Quote: ... EVs were fractionated by OptiPrep density gradient ultracentrifugation (100,000 × g, 18 h, 4 °C) using a SW41 rotor (Beckman Coulter, Fullerton, CA, USA) through a continuous 5–40% OptiPrep (Sigma-Aldrich ...
-
bioRxiv - Biochemistry 2022Quote: ... The carboy was placed in an incubator (Sanyo MCO-17A1C) at 37 C and the optical density (OD) was monitored at 550 nm (Beckman DU-800 spectrophotometer) via 1 mL samples removed from the same port ...
-
bioRxiv - Immunology 2022Quote: ... followed by ultracentrifugation at 110,000 × g for 90 min at 4°C on an Optima XPN -100 ultracentrifuge with SW32Ti rotor (Beckman Coulter, Brea, CA, USA). The isolated EVs was washed with PBS and followed with a secondary ultracentrifugation (110,000 × g for 90 min at 4°C) ...
-
bioRxiv - Genomics 2020Quote: ... were layered onto a 1.8M sucrose cushion and ultra-centrifuged at 24,400 rpm at 4°C for 2 hours using a SW28 swinging bucket rotor (Beckman Coulter Optimal centrifuge #L90K). The nuclear pellet was re-suspended in 2% BSA in 1X PBS ...
-
bioRxiv - Microbiology 2020Quote: ... EMVs were obtained by ultracentrifugation from 4 mL of filtrate at 100,000 × g (average centrifugal force) and 4°C for 2 h with an OptimaX centrifuge (Beckman Coulter, Brea, CA, USA). The pellets were resuspended in 400 μL of Dulbecco’s phosphate-buffered saline (DPBS ...
-
bioRxiv - Cell Biology 2021Quote: ... Cells were spun down at 4°C for 15 minutes at 4000 RPM (3040 RCF) in a J6 centrifuge (Beckman Coulter Life Sciences). Supernatant was discarded and pellets were stored in 15ml conical tubes in -80°C ...
-
bioRxiv - Neuroscience 2022Quote: ... The tubes were sealed and centrifuged at 50,000 rpm at 4°C for 2 h in an OptimaTM L-90K ultracentrifuge using the 70.1Ti rotor (Beckman Coulter, Brea, CA, USA). After the centrifugation ...
-
bioRxiv - Biochemistry 2020Quote: ... Unbroken cells were pelleted by centrifugation at 18,000 RCF for 30 min at 4°C (Beckman centrifuge J-20-XP, Rotor JA16.250, DE). The supernatant was transferred to 45 Tl rotor (Beckman ...
-
bioRxiv - Biochemistry 2019Quote: ... To collect the membrane fraction the cleared supernatant was centrifuged at 100,000g at 4°C for 1h in a Beckman Optima MAX ultracentrifuge with a TLA110 rotor using polycarbonate thick wall centrifuge tubes (Beckman coulter ref. 362305). The supernatant that contains soluble proteins was removed and the pellet-containing membranes was resuspended in 1ml ice-cold homogenization buffer by sonication and re-centrifuged at 100,000g ...
-
bioRxiv - Pharmacology and Toxicology 2019Quote: ... for 10 m at 4°C and pelleted the lysates at 50,000×g for 1 h at 4°C using an Optima MAX-XP ultracentrifuge (Beckman Coulter, Brea, CA, USA). We resuspended cell fractions in 500 μL water and stored the samples at 4°C until analysis ...
-
bioRxiv - Biophysics 2020Quote: ... Cells were grown in LB medium containing 50 μg/mL Kanamycin at 37°C to an OD600~1.0 (as measured in a Beckman Coulter DU 640 spectrophotometer) and then quickly transferred on ice to cool for ~20 mins ...
-
bioRxiv - Microbiology 2021Quote: ... Ten milliliters of allantoic or amniotic fluid was centrifuged at maximum speed (16,000 × g) for 30 min at 4 °C using a floor ultra centrifuge (Beckman Optima L-60 Ultracentrifuge). After removal of the supernatant ...
-
bioRxiv - Microbiology 2019Quote: ... the extracts were added on top of layers in LCM buffer with 45% and 5% glycerol and ultracentrifuged at 77 000 x g for 1 h at +4°C (Beckman Coulter SW41Ti rotor). Viral nucleocapsids were recovered from the bottom of the ultracentrifuge tube ...
-
bioRxiv - Cell Biology 2020Quote: ... followed by serial centrifugation at 100’000 g for 120 min at 10 °C (Beckman fixed-angle TL110 rotor; Beckman Optima Max-TL ultracentrifuge). The so obtained P100 pellets ...
-
bioRxiv - Immunology 2021Quote: ... Supernatants were collected and centrifuged for 5 min at 1200 rpm at 20°C (Allegra™ X-12R Centrifuge, Beckman Coulter, the Netherlands). Cells were then resuspended in PBS ...
-
bioRxiv - Microbiology 2022Quote: ... The supernatant fractions were collected and centrifuged at 75,600 x g for 90 min at 4 °C (Beckman JA25.50 rotor, Beckman Avanati J-25, Beckman Coulter). The resulting pellets were washed again and resuspended in 500 μl potassium phosphate buffer ...
-
bioRxiv - Microbiology 2022Quote: ... 100 ml cell cultures were grown over night and harvested by centrifugation at 15,000 x g for 15 min at 4 °C (Beckman JLA-16.250 rotor, Beckman Avanti J-25, Beckman Coulter). Pellets were washed with 20 mM potassium phosphate (pH 7.5 ...
-
bioRxiv - Microbiology 2022Quote: ... then clarified by centrifugation at 2000 rpm at 4°C for 5 min in a refrigerated tabletop centrifuge (Beckman Coulter, Indianapolis IN, USA) to remove large debris ...
-
bioRxiv - Microbiology 2023Quote: ... cells were pelleted by centrifugation at 6,000 ×g at 4 °C for 15 min with ALLEGRA X-30R (Beckman Coulter, Brea, CA, USA). The supernatant was centrifuged at 15,000 ×g at 4 °C for 15 min with Sorvall LYNX4000 (Thermo Scientific ...
-
bioRxiv - Bioengineering 2023Quote: ... The diluted sample was then centrifuged using a Beckman ultracentrifuge (Optima L90K) with two cycles of 1h10 at 110,000 x g at 4°C (rotor type 70Ti, Beckman Floor Ultracentrifuge Optima L90K). Between them ...
-
bioRxiv - Cancer Biology 2022Quote: ... the sample was centrifuged at 268,000 ×g at 4°C for 38 min with an MLA-50 rotor (Beckman Coulter, Brea, CA, USA). The top layer and subsequent 10 fractions (fractions 1–10 ...
-
bioRxiv - Plant Biology 2023Quote: ... The disrupted cells were subjected to ultracentrifugation at 4°C and 235000 g for 1h (Beckman Optima™ L-80 XP, rotor Ti45). The resulting supernatant was loaded onto an Äkta purifier system (GE HealthCare ...
-
bioRxiv - Cancer Biology 2023Quote: ... the supernatant was ultracentrifuged at 100,000 × g at 4°C for 90 min using Beckman Coulter Optima™ XE-90 Ultracentrifuge (Beckman Colter, Brea, CA) equipped with Type 45 Ti rotor ...
-
bioRxiv - Cell Biology 2023Quote: ... the resulting G-actin mix was ultracentrifuged at 90K rpm for 30 minutes at 4°C in an ultracentrifuge (Beckman, Optima TL 100) to remove actin oligomers and/or aggregates.
-
bioRxiv - Physiology 2023Quote: ... blood samples were centrifuged at 3000 RPM for 15 minutes at four °C in a refrigerated centrifuge (Beckman Coulter Allegra X-22 Series). Plasma samples were aliquoted and stored at -80°C ...
-
bioRxiv - Biochemistry 2023Quote: ... Expression was continued for 7h and the cells harvested by centrifugation at ∼6250g for 15 min at 4°C (Beckman Coulter centrifuge, JLA8.1000).
-
bioRxiv - Biochemistry 2023Quote: ... expression from the viral backbone and cells harvested between 72h-84h after cell proliferation arrest by centrifugation at 1200g for 15min at 4°C (Beckman Coulter centrifuge, JLA8.1000). Further ...
-
bioRxiv - Biochemistry 2023Quote: ... Expression was continued for 16h and the cells harvested by centrifugation at ∼6250g for 15 min at 4°C (Beckman Coulter centrifuge, JLA8.1000). The RING Zn-finger domains from both RING1B and PCGF4 subunits were cloned into a modified polycistronic expression vector (pET29a ...
-
bioRxiv - Biophysics 2023Quote: ... Virions were banded by density gradient centrifugation at 152,000 x g for 16 h at 4°C in a SW41 rotor (Beckman Coulter SRL, Milan, Italy). The gradient was then fractionated ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: ... the cell lysate was layered on top of a discontinuous OptiPrep® gradient (50 %, 35 %, 30 %, 20 %, and 15 %) and centrifuged at 135,000 g for 1 h at 4°C (Beckman L8-80M Ultracentrifuge, USA). The melanin pellet was recovered ...
-
bioRxiv - Cell Biology 2024Quote: ... and centrifuged at 16,500 × g (14,500 rpm) at 4°C for 20 min using a Type Ti 45 fixed-angle rotor (Beckman Coulter, k-factor 1.275) to isolate large EVs ...
-
bioRxiv - Biophysics 2019Quote: ... Pellets were collected by centrifugation at 3500 rpm for 10 minutes at 4°C in a swinging-bucket centrifuge (Beckman Coulter, Allegra X-12R) and miniprepped (Qiagen ...
-
bioRxiv - Microbiology 2019Quote: ... RNA was density separated by centrifugation at 124 000 g at 20 °C for 65 h using an Optima L-90 XP ultracentrifuge (Beckman Coulter, Brea, California, USA). 13 fractions were obtained from each sample ...
-
bioRxiv - Evolutionary Biology 2021Quote: ... and supernatants were ultracentrifuged at 37 000 rpm (~100 000 g) and 10°C for 1h (Beckman Optima LE-80 K; rotor 70.1.Ti). Pellets were resuspended in 100μL of buffer (10 mM Tris-HCL ...