Labshake search
Citations for Beckman :
1151 - 1200 of 1329 citations for 6 Hydroxymethyl 4 methoxy 5 methyl nicotinic acid methyl ester since 2020
Citations are collected from bioRxiv only, the total number of publications could be much larger.
-
bioRxiv - Neuroscience 2023Quote: ... then spun at 100,000 x g for 30 min at 4°C in an ultracentrifuge (Beckman OPTIMA TLX with TLA-100.3 rotor). The supernatant was saved and the pellet went through a series of similar extractions using High-Salt Triton Buffer (High-Salt Buffer ...
-
bioRxiv - Neuroscience 2023Quote: ... The supernatants were then combined and centrifuged at 17,000g for 10min at 4°C in a Beckman SW41-Ti rotor (Beckman Coulter, Brea, CA). The supernatant was saved as the cytosolic (CYT ...
-
bioRxiv - Cell Biology 2023Quote: ... cells were blocked in 2% human serum and PBS for 30 min at 4°C and stained with DC-SIGN (Beckman Coulter #A07407), CD80 (BioLegend #305214) ...
-
bioRxiv - Cell Biology 2023Quote: Myf5High and Myf5Low MuSCs were isolated from a pool of 4 male and 4 female mice and repeated in two independent experiments and total RNA was extracted using Agencourt RNAdvance tissue Kit (Beckman Coulter, #A32646) with a quality score of RQN 9.3 to 10 ...
-
bioRxiv - Cell Biology 2023Quote: ... was next subjected to ultracentrifugation at 120,000 × g for 4 h in a SW 28 Ti Swinging-Bucket Rotor (Beckman Coulter, Fullerton, CA) to sediment small EVs ...
-
bioRxiv - Plant Biology 2023Quote: ... 700 μl of obtained extract was applied to a chilled sucrose density gradient and centrifuged at 4 °C for 2 hours 45 minutes at 151,000 ×g using the SW 41 Ti rotor (Beckman Culture Life Sciences). After centrifugation ...
-
bioRxiv - Biochemistry 2023Quote: ... Triton-X was added to the lysate to a final concentration of 0.1% and clarified by spinning at 15,000 RCF at 4°C for 45 minutes (Beckman Coulter JA-20 rotor). The supernatant was loaded onto a 5 mL HisTrap™ FF crude column (GE Healthcare ...
-
bioRxiv - Cell Biology 2023Quote: ... the supernatants were transferred into SW60 tubes (in vivo studies 1–4) or SW40 tubes (donated patients) (Beckman Coulter Inc., Brea, USA) and centrifuged at 10,000xg for 35 minutes ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysates were loaded onto the sucrose gradients and centrifuged at 40’000 rpm for 2 h at 4°C using the SW 41 Ti rotor (Beckman Coulter, Cat# 331362). Subsequently ...
-
bioRxiv - Biochemistry 2023Quote: ... Samples were centrifuged at 100,000 × g for 2 hr at 4 °C (Type 50.2 Ti Fixed angle ultracentrifuge rotor, Beckman Coulter, Brea, CA, USA). The supernatants were aspirated ...
-
bioRxiv - Microbiology 2023Quote: ... Cells were incubated further overnight at 20°C and subsequently harvested by centrifugation (Beckman rotor 8.1000, 5000 rpm, 15 min, 4°C). The pellet was resuspended in PBS ...
-
bioRxiv - Immunology 2023Quote: ... Bacteria cultures were collected and discarded by centrifugation for 60 min at 4,000-8,000 x g and the supernatants were subjected to high-speed centrifugation at 11,9000 x g for 2-3 h at 4°C (Beckman Coulter Optima Ultracentrifuge). The pellets containing the OMVs were washed with PBS ...
-
bioRxiv - Biochemistry 2023Quote: ... by centrifugation at 80,000 × g for 30 min at 4°C using a TLS-55 rotor (Beckman Coulter Inc., Miami, FL, USA). Crista membranes were identified and removed based on fluorescence under a UV lamp ...
-
bioRxiv - Neuroscience 2024Quote: ... The supernatant was segregated subsequent to centrifuging the brain tissue homogenate for 1 h at 100,000g and 4°C utilising an ultra-high-speed centrifuge (Beckman, Optima MAX-XP). The tissue residue was then reprocessed ...
-
bioRxiv - Biophysics 2024Quote: ... Samples were centrifuged at 24,000 rotations per minute using an S-28 rotor at 4◦C in an Optima XL-100K Ultracentrifuge (Beckman Coulter, Brea, CA). The supernatant was decanted ...
-
bioRxiv - Developmental Biology 2024Quote: ... for 30 min at 4°C in the dark followed by flow cytometry analysis on a CytoFlex 26 (Beckman Coulter, Indianapolis, IN) in PE-A and PerCP-A channels ...
-
bioRxiv - Molecular Biology 2024Quote: ... was loaded on top of the gradient and spun at 4°C for 18 hr at 30,000 rpm (Beckman, Rotor SW-41Ti). Samples were fractionated with absorbance optics (λ = 260 nm ...
-
bioRxiv - Microbiology 2024Quote: ... The top agar was then scraped off the LB agar and centrifuged for 26,000 x g at 4°C for 1 hour (Beckman Coulter JA-17). The supernatant was then removed ...
-
bioRxiv - Microbiology 2024Quote: ... Crude ribosomes were separated from other low molecular weight cellular contents by centrifugation at 35000 rpm (126,000g) for 1 hour at 4 °C (Beckman rotor Type 70Ti). The crude ribosome pellet was resuspended in 10 mL HMA-10 buffer and layered on top of a 10 mL 32% sucrose solution in HMA-10 buffer and centrifuged for 16 hours at 37,000 rpm (140,000g ...
-
bioRxiv - Plant Biology 2024Quote: ... The fluid was centrifuged at 1,000 x g for 10 minutes at 4 C using an Allegra X-30R centrifuge (Beckman Coulter Life Sciences). The resulting supernatant was centrifuged at 200,000 x g for 30 minutes at 4 °C using a Beckman Optima Ultracentrifuge with TLA110 rotor (Beckman Coulter Life Sciences) ...
-
bioRxiv - Plant Biology 2024Quote: ... The resulting supernatant was centrifuged at 200,000 x g for 30 minutes at 4 °C using a Beckman Optima Ultracentrifuge with TLA110 rotor (Beckman Coulter Life Sciences). The pellet was resuspended in 30 µL of cold ddH20 and stored in −80 °C until further use.
-
bioRxiv - Neuroscience 2024Quote: ... The suspension was then centrifuged at 2500 × g for 30 min at 4 °C and the supernatant was transferred to an ultra-centrifugation tube (Quickseal Tubes, Beckman Coulter #342414). AAV purification was performed by ultra-centrifugation over a discontinuous Iodixanol density gradient (OptiPrep Density Gradient Medium ...
-
bioRxiv - Pharmacology and Toxicology 2024Quote: The number of μPL per PVA template and size distribution were derived via a Multisizer 4 COULTER particle counter (Beckman Coulter, CA). Briefly ...
-
bioRxiv - Neuroscience 2024Quote: ... The PNS- Nycodenz gradient was centrifuged for 1 h at 141,000 x g at 4°C (46,000 rpm, TLS-55 rotor, Beckman Coulter Optima TLX Ultracentrifuge). After centrifugation ...
-
bioRxiv - Neuroscience 2024Quote: ... This gradient was centrifuged for 30 minutes at 72,000 x g at 4°C (33,000 rpm, TLS-55 rotor, Beckman Coulter Optima TLX Ultracentrifuge). After centrifugation ...
-
bioRxiv - Biochemistry 2024Quote: ... Purified nucleosome arrays were subsequently isolated on 5-40% w/v sucrose gradients in 0.5X TE by centrifuging the gradients at 39,000 rpm and 4°C for 8 h in a SW41 Ti rotor (Beckman Coulter, Brea, CA). After centrifugation ...
-
bioRxiv - Cell Biology 2024Quote: ... The crude pellets from MSC-CM and HDF-CM after the first-round 100,000 × g ultracentrifugation were washed with PBS at 100,000 × g and 4 ℃ for 45 min using Optima™ MAX-TL Ultracentrifuge (Beckman Coulter, USA) and TLA-120.2 Rotor (Beckman Coulter ...
-
bioRxiv - Biophysics 2020Quote: ... lysate was centrifuged at 5 °C with 13000 rpm for 15 min by Avanti J-E Ultra Centrifuge (Beckman Coulter). Supernatant from centrifugation was filtered with 0.45 μm SFCA syringe filters (Sigma Aldrich ...
-
bioRxiv - Microbiology 2020Quote: ... and overlaid with 6 ml of 30% and 3 ml of 5% sucrose (w/v) followed by centrifugation at 32,000 rpm in SW41 rotor (Beckman Coulter) for 20 h ...
-
bioRxiv - Molecular Biology 2020Quote: ... Four mL of each density (3.5 mL for the 5% density) was stacked into an open polyallomer tube (337986, Beckman Coulter) using a Tecan freedom EVO ...
-
bioRxiv - Biophysics 2022Quote: ... The cell suspension was centrifuged for 5 min at 2000 g (Centrifuge Beckman Coulter Allegra X-15-R, Rotor Sx4750A)) and 4°C ...
-
bioRxiv - Cell Biology 2020Quote: ... 5 × 105 additional cells were immediately processed for far red signal analysis by flow cytometry (Gallios, Beckman Coulter, Brea, USA) (D0) ...
-
bioRxiv - Neuroscience 2020Quote: ... reverse 5’-CTTA TTAGTCAGTCAGAAACAAC-3’).ThePCR amplicon was purified using RNAse-free SPRI beads (Agencourt RNAclean XP, Beckman-Coulter A63987) and then used for in vitro transcription with the HiScribe T7 ARCA mRNA Kit (with tailing ...
-
bioRxiv - Microbiology 2020Quote: ... the 96-well plate was centrifuged at 1,000 RPM for 5 min using an Allegra 25R model centrifuge (Beckman Coulter) with inserts for 96-well plates ...
-
bioRxiv - Microbiology 2020Quote: ... At the end of each selection cells were pelleted from the media by centrifugation 200 x g for 5 min in an Allegra centrifuge (Beckman) and supernatant was transferred for storage at −80C ...
-
bioRxiv - Microbiology 2022Quote: ... and layered onto a preformed 11 mL 5% to 15% (wt/vol) Ficoll gradient in a 13.2 mL thin-wall polyallomer ultracentrifuge tube (Beckman Coulter). Gradients were centrifuged at 12,000 rpm for 2 h at 4°C in an SW41 Ti swinging-bucket rotor in a Sorvall Discovery SE ultracentrifuge ...
-
bioRxiv - Immunology 2022Quote: ... 1.5 μl of PI was also added and samples were run on the Gallios™ Flow Cytometer (Beckman Coulter, Inc). Data was analysed offline using Kaluza® Flow Analysis software version 2.1a (Beckman Coulter Inc. ...
-
bioRxiv - Immunology 2021Quote: ... subsequently overlaid onto 5 mL of 20% sucrose and ultracentrifuged at 24,000 rpm for 2.5 hrs (Beckman XPN80, SW32.Ti). The viral pellet was resuspended in PBS.
-
bioRxiv - Microbiology 2021Quote: ... bacterial cells were washed in PBS and diluted 1:5 before acquisition on a CytoFLEX benchtop flow cytometer (Beckman Coulter). For each sample ...
-
bioRxiv - Molecular Biology 2022Quote: ... Concentrated chromatin samples were loaded on 11 mL gradients of 5-25% sucrose in TE buffer and centrifuged in a preparative ultracentrifuge with a SW41 Ti rotor (Beckman) for 11 hrs ...
-
bioRxiv - Cell Biology 2022Quote: ... Cells were centrifuged at 1500 g for 5 min in an F2402 rotor in a GS15R table-top centrifuge (Beckman) and resuspend with water to wash the cells ...
-
bioRxiv - Cancer Biology 2024Quote: ... The fragments were repaired the 3’and 5’overhangs using End repair mix (component of SureselectXT) and purified using Agencourt AMPure XP Beads (Beckman). The purified fragments were added with ‘A’ tail using A tailing Mix (component of SureSelectXT ...
-
bioRxiv - Microbiology 2023Quote: Human bladder cell line PD07i was cultured at 37°C with 5% CO2 to confluency as previously described and counted using a Coulter Counter (Beckman) to a minimum of 1×105 cells/mL ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysates were then loaded onto a 5-50% sucrose density gradient and centrifuged in an SW41 Ti rotor (Beckman) at 36,000 rpm for 2 h at 4 °C ...
-
bioRxiv - Microbiology 2023Quote: ... Sample analysis was performed by mixing 5 µl of fluorescent vesicles with 20 µl of Flow-Count Fluorospheres (Beckman Coulter) in a final volume of 200 µl of PBS to determine absolute counts ...
-
bioRxiv - Cell Biology 2023Quote: ... 5 mM Mg(OAc)2) and centrifuged for 20 min at 100,000 x g in a 70Ti rotor (Beckman Coulter). The resulting membrane pellet was resuspended in 1 ml rough microsome (RM ...
-
bioRxiv - Biophysics 2023Quote: ... Each 300μl dialysate was mixed with 300μl of 80% (w/v) Nycodenz dissolved in reconstitution buffer and then divided equally into two 5 x 41 mm ultracentrifuge tubes (Beckman). Then ...
-
bioRxiv - Molecular Biology 2023Quote: ... The lysates were sheared with a 25-gauge 5/8 needle and loaded onto CsCl solution (150% w/v) for ultracentrifugation in NVT 65.2 rotor (Beckman coulter) at 42,000 rpm for 20 hours at 4°C ...
-
bioRxiv - Molecular Biology 2023Quote: ... Lysed cells were centrifuged and the viscous supernatant was immediately loaded on a 5-24% (w/v) sucrose density gradient and centrifuged in SW 32 Ti rotor (Beckman) overnight ...
-
bioRxiv - Cancer Biology 2024Quote: ... The lysates were then loaded onto a 5–50% sucrose density gradient and centrifuged in an SW41 Ti rotor (Beckman) at 36,000 rpm for 2 h at 4 °C ...